From: <Ben_Pai@wistron.com> To: <joel@jms.id.au> Cc: <robh+dt@kernel.org>, <andrew@aj.id.au>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>, <Claire_Ku@wistron.com> Subject: RE: [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform Date: Thu, 17 Sep 2020 09:44:56 +0000 [thread overview] Message-ID: <6f5af09c8a6843628bf2855d55e9206f@wistron.com> (raw) In-Reply-To: <CACPK8Xf3NZEJUd8W3nBQ1Na=4vjrS9ae=7sB_paiuxtKKkKY_A@mail.gmail.com> Thanks for your review I will resubmit a new patch containing gpio-line-names later Best Regards, Ben -----Original Message----- From: Joel Stanley <joel@jms.id.au> Sent: Friday, September 11, 2020 1:35 PM To: Ben Pai/WHQ/Wistron <Ben_Pai@wistron.com> Cc: Rob Herring <robh+dt@kernel.org>; Andrew Jeffery <andrew@aj.id.au>; devicetree <devicetree@vger.kernel.org>; Linux ARM <linux-arm-kernel@lists.infradead.org>; linux-aspeed <linux-aspeed@lists.ozlabs.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; Claire Ku/WHQ/Wistron <Claire_Ku@wistron.com> Subject: Re: [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform On Wed, 9 Sep 2020 at 09:09, Ben Pai <ben_pai@wistron.com> wrote: > > The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an > OpenPower Power9 server. > > Signed-off-by: Ben Pai <Ben_Pai@wistron.com> This looks good to me. I assume you have all the hardware correctly described. I notice you don't have any gpio-line-names. If you're using recent openbmc you will need those descriptions, but I will leave that to you. Reviewed-by: Joel Stanley <joel@jms.id.au> Cheers, Joel > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 663 > ++++++++++++++++++++ > 2 files changed, 664 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 4572db3fa5ae..92edb2e12823 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1381,6 +1381,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-microsoft-olympus.dtb \ > aspeed-bmc-opp-lanyang.dtb \ > aspeed-bmc-opp-mihawk.dtb \ > + aspeed-bmc-opp-mowgli.dtb \ > aspeed-bmc-opp-nicole.dtb \ > aspeed-bmc-opp-palmetto.dtb \ > aspeed-bmc-opp-romulus.dtb \ > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > new file mode 100644 > index 000000000000..11fd86980162 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > @@ -0,0 +1,663 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/dts-v1/; > +#include "aspeed-g5.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> #include > +<dt-bindings/leds/leds-pca955x.h> > + > +/ { > + model = "Mowgli BMC"; > + compatible = "ibm,mowgli-bmc", "aspeed,ast2500"; > + > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200 earlyprintk"; > + }; > + > + memory@80000000 { > + reg = <0x80000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + flash_memory: region@98000000 { > + no-map; > + reg = <0x98000000 0x04000000>; /* 64M */ > + }; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: jpegbuffer { > + size = <0x02000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + air-water { > + label = "air-water"; > + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 6)>; > + }; > + > + checkstop { > + label = "checkstop"; > + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(J, 2)>; > + }; > + > + ps0-presence { > + label = "ps0-presence"; > + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Z, 2)>; > + }; > + > + ps1-presence { > + label = "ps1-presence"; > + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Z, 0)>; > + }; > + > + id-button { > + label = "id-button"; > + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 1)>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + poll-interval = <1000>; > + > + fan0-presence { > + label = "fan0-presence"; > + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; > + linux,code = <9>; > + }; > + > + fan1-presence { > + label = "fan1-presence"; > + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; > + linux,code = <10>; > + }; > + > + fan2-presence { > + label = "fan2-presence"; > + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; > + linux,code = <11>; > + }; > + > + fan3-presence { > + label = "fan3-presence"; > + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; > + linux,code = <12>; > + }; > + > + fan4-presence { > + label = "fan4-presence"; > + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; > + linux,code = <13>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + front-fault { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; > + }; > + > + power-button { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; > + }; > + > + front-id { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; > + }; > + > + fan0 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; > + }; > + > + fan1 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; > + }; > + > + fan2 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; > + }; > + > + fan3 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; > + }; > + > + fan4 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + fsi: gpio-fsi { > + compatible = "fsi-master-gpio", "fsi-master"; > + #address-cells = <2>; > + #size-cells = <0>; > + no-gpio-delays; > + > + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; > + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; > + mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; > + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; > + trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; > + }; > + > + iio-hwmon-12v { > + compatible = "iio-hwmon"; > + io-channels = <&adc 0>; > + }; > + > + iio-hwmon-5v { > + compatible = "iio-hwmon"; > + io-channels = <&adc 1>; > + }; > + > + iio-hwmon-3v { > + compatible = "iio-hwmon"; > + io-channels = <&adc 2>; > + }; > + > + iio-hwmon-vdd { > + compatible = "iio-hwmon"; > + io-channels = <&adc 3>; > + }; > + > + iio-hwmon-vcs { > + compatible = "iio-hwmon"; > + io-channels = <&adc 5>; > + }; > + > + iio-hwmon-vdn { > + compatible = "iio-hwmon"; > + io-channels = <&adc 7>; > + }; > + > + iio-hwmon-vio { > + compatible = "iio-hwmon"; > + io-channels = <&adc 9>; > + }; > + > + iio-hwmon-vddra { > + compatible = "iio-hwmon"; > + io-channels = <&adc 11>; > + }; > + > + iio-hwmon-battery { > + compatible = "iio-hwmon"; > + io-channels = <&adc 12>; > + }; > + > + iio-hwmon-vddrb { > + compatible = "iio-hwmon"; > + io-channels = <&adc 13>; > + }; > +}; > + > +&pwm_tacho { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default > + &pinctrl_pwm2_default &pinctrl_pwm3_default > + &pinctrl_pwm4_default>; > + > + fan@0 { > + reg = <0x00>; > + aspeed,fan-tach-ch = /bits/ 8 <0x00>; > + }; > + > + fan@1 { > + reg = <0x01>; > + aspeed,fan-tach-ch = /bits/ 8 <0x01>; > + }; > + > + fan@2 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x02>; > + }; > + > + fan@3 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x03>; > + }; > + > + fan@4 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x04>; > + }; > + > + fan@5 { > + reg = <0x00>; > + aspeed,fan-tach-ch = /bits/ 8 <0x05>; > + }; > + > + fan@6 { > + reg = <0x01>; > + aspeed,fan-tach-ch = /bits/ 8 <0x06>; > + }; > + > + fan@7 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x07>; > + }; > + > + fan@8 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x08>; > + }; > + > + fan@9 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x09>; > + }; > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + label = "bmc"; > + m25p,fast-read; > + spi-max-frequency = <50000000>; > + partitions { > + #address-cells = < 1 >; > + #size-cells = < 1 >; > + compatible = "fixed-partitions"; > + u-boot@0 { > + reg = < 0 0x60000 >; > + label = "u-boot"; > + }; > + u-boot-env@60000 { > + reg = < 0x60000 0x20000 >; > + label = "u-boot-env"; > + }; > + obmc-ubi@80000 { > + reg = < 0x80000 0x1F80000 >; > + label = "obmc-ubi"; > + }; > + }; > + }; > + flash@1 { > + status = "okay"; > + label = "alt-bmc"; > + m25p,fast-read; > + spi-max-frequency = <50000000>; > + partitions { > + #address-cells = < 1 >; > + #size-cells = < 1 >; > + compatible = "fixed-partitions"; > + u-boot@0 { > + reg = < 0 0x60000 >; > + label = "alt-u-boot"; > + }; > + u-boot-env@60000 { > + reg = < 0x60000 0x20000 >; > + label = "alt-u-boot-env"; > + }; > + obmc-ubi@80000 { > + reg = < 0x80000 0x1F80000 >; > + label = "alt-obmc-ubi"; > + }; > + }; > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + label = "pnor"; > + m25p,fast-read; > + spi-max-frequency = <100000000>; > + }; > +}; > + > +&lpc_ctrl { > + status = "okay"; > + memory-region = <&flash_memory>; > + flash = <&spi1>; > +}; > + > +&uart1 { > + /* Rear RS-232 connector */ > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_nrts1_default > + &pinctrl_ndtr1_default > + &pinctrl_ndsr1_default > + &pinctrl_ncts1_default > + &pinctrl_ndcd1_default > + &pinctrl_nri1_default>; }; > + > +&uart2 { > + /* APSS */ > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; }; > + > +&uart5 { > + status = "okay"; > +}; > + > +&mac0 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii1_default>; > + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, > + <&syscon ASPEED_CLK_MAC1RCLK>; > + clock-names = "MACCLK", "RCLK"; > + use-ncsi; > +}; > + > +&mac1 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + tmp275@48 { > + compatible = "ti,tmp275"; > + reg = <0x48>; > + }; > +}; > + > +&i2c1 { > + status = "disabled"; > +}; > + > +&i2c2 { > + status = "okay"; > + > + /* CPU MFG CONN */ > + > +}; > + > +&i2c3 { > + status = "okay"; > + > + /* APSS */ > + /* CPLD */ > + > + /* PCA9516 (repeater) -> > + * CLK Buffer 9FGS9092 > + * Power Supply 0 > + * Power Supply 1 > + * PCA 9552 LED > + */ > + > + pca9552: pca9552@60 { > + compatible = "nxp,pca9552"; > + reg = <0x60>; > + #address-cells = <1>; > + #size-cells = <0>; > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@8 { > + reg = <8>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@9 { > + reg = <9>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@10 { > + reg = <10>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@11 { > + reg = <11>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@12 { > + reg = <12>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@13 { > + reg = <13>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@14 { > + reg = <14>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@15 { > + reg = <15>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + }; > + > + power-supply@68 { > + compatible = "ibm,cffps1"; > + reg = <0x68>; > + }; > + > + power-supply@69 { > + compatible = "ibm,cffps1"; > + reg = <0x69>; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + > + /* CP0 VDD & VCS : IR35221 */ > + /* CP0 VDN & VIO : IR35221 */ > + /* CP0 VDDR : IR35221 */ > + > + ir35221@28 { > + compatible = "infineon,ir35221"; > + reg = <0x28>; > + }; > + > + ir35221@29 { > + compatible = "infineon,ir35221"; > + reg = <0x29>; > + }; > + > + ir35221@2d { > + compatible = "infineon,ir35221"; > + reg = <0x2d>; > + }; > + > +}; > + > +&i2c5 { > + status = "disabled"; > +}; > + > +&i2c6 { > + status = "disabled"; > +}; > + > +&i2c7 { > + status = "disabled"; > +}; > + > +&i2c8 { > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > +}; > + > +&i2c9 { > + status = "okay"; > + > + /* PCIe G3 x16 slot */ > +}; > + > +&i2c10 { > + status = "disabled"; > +}; > + > +&i2c11 { > + status = "okay"; > + > + /* CPLD */ > + /* TPM */ > + /* RTC RX8900CE */ > + /* TMP275A */ > + /* TMP275A */ > + > + tmp275@48 { > + compatible = "ti,tmp275"; > + reg = <0x48>; > + }; > + > + tmp275@49 { > + compatible = "ti,tmp275"; > + reg = <0x49>; > + }; > + > +}; > + > +&i2c12 { > + status = "disabled"; > +}; > + > +&i2c13 { > + status = "disabled"; > +}; > + > +&vuart { > + status = "okay"; > +}; > + > +&gfx { > + status = "okay"; > + memory-region = <&gfx_memory>; }; > + > +&adc { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_default > + &pinctrl_adc1_default > + &pinctrl_adc2_default > + &pinctrl_adc3_default > + &pinctrl_adc4_default > + &pinctrl_adc5_default > + &pinctrl_adc6_default > + &pinctrl_adc7_default > + &pinctrl_adc8_default > + &pinctrl_adc9_default > + &pinctrl_adc10_default > + &pinctrl_adc11_default > + &pinctrl_adc12_default > + &pinctrl_adc13_default > + &pinctrl_adc14_default > + &pinctrl_adc15_default>; }; > + > +&wdt1 { > + aspeed,reset-type = "none"; > + aspeed,external-signal; > + aspeed,ext-push-pull; > + aspeed,ext-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdtrst1_default>; }; > + > +&wdt2 { > + aspeed,alt-boot; > +}; > + > +&ibt { > + status = "okay"; > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; }; > + > +#include "ibm-power9-dual.dtsi" > + > -- > 2.17.1 > > > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > ------------------- This email contains confidential or legally > privileged information and is for the sole use of its intended recipient. > Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. > If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately. > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > -------------------
WARNING: multiple messages have this Message-ID (diff)
From: <Ben_Pai@wistron.com> To: <joel@jms.id.au> Cc: devicetree@vger.kernel.org, linux-aspeed@lists.ozlabs.org, andrew@aj.id.au, linux-kernel@vger.kernel.org, Claire_Ku@wistron.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org Subject: RE: [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform Date: Thu, 17 Sep 2020 09:44:56 +0000 [thread overview] Message-ID: <6f5af09c8a6843628bf2855d55e9206f@wistron.com> (raw) In-Reply-To: <CACPK8Xf3NZEJUd8W3nBQ1Na=4vjrS9ae=7sB_paiuxtKKkKY_A@mail.gmail.com> Thanks for your review I will resubmit a new patch containing gpio-line-names later Best Regards, Ben -----Original Message----- From: Joel Stanley <joel@jms.id.au> Sent: Friday, September 11, 2020 1:35 PM To: Ben Pai/WHQ/Wistron <Ben_Pai@wistron.com> Cc: Rob Herring <robh+dt@kernel.org>; Andrew Jeffery <andrew@aj.id.au>; devicetree <devicetree@vger.kernel.org>; Linux ARM <linux-arm-kernel@lists.infradead.org>; linux-aspeed <linux-aspeed@lists.ozlabs.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; Claire Ku/WHQ/Wistron <Claire_Ku@wistron.com> Subject: Re: [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform On Wed, 9 Sep 2020 at 09:09, Ben Pai <ben_pai@wistron.com> wrote: > > The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an > OpenPower Power9 server. > > Signed-off-by: Ben Pai <Ben_Pai@wistron.com> This looks good to me. I assume you have all the hardware correctly described. I notice you don't have any gpio-line-names. If you're using recent openbmc you will need those descriptions, but I will leave that to you. Reviewed-by: Joel Stanley <joel@jms.id.au> Cheers, Joel > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 663 > ++++++++++++++++++++ > 2 files changed, 664 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 4572db3fa5ae..92edb2e12823 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1381,6 +1381,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-microsoft-olympus.dtb \ > aspeed-bmc-opp-lanyang.dtb \ > aspeed-bmc-opp-mihawk.dtb \ > + aspeed-bmc-opp-mowgli.dtb \ > aspeed-bmc-opp-nicole.dtb \ > aspeed-bmc-opp-palmetto.dtb \ > aspeed-bmc-opp-romulus.dtb \ > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > new file mode 100644 > index 000000000000..11fd86980162 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts > @@ -0,0 +1,663 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/dts-v1/; > +#include "aspeed-g5.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> #include > +<dt-bindings/leds/leds-pca955x.h> > + > +/ { > + model = "Mowgli BMC"; > + compatible = "ibm,mowgli-bmc", "aspeed,ast2500"; > + > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200 earlyprintk"; > + }; > + > + memory@80000000 { > + reg = <0x80000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + flash_memory: region@98000000 { > + no-map; > + reg = <0x98000000 0x04000000>; /* 64M */ > + }; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: jpegbuffer { > + size = <0x02000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + air-water { > + label = "air-water"; > + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 6)>; > + }; > + > + checkstop { > + label = "checkstop"; > + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(J, 2)>; > + }; > + > + ps0-presence { > + label = "ps0-presence"; > + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Z, 2)>; > + }; > + > + ps1-presence { > + label = "ps1-presence"; > + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Z, 0)>; > + }; > + > + id-button { > + label = "id-button"; > + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 1)>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + poll-interval = <1000>; > + > + fan0-presence { > + label = "fan0-presence"; > + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; > + linux,code = <9>; > + }; > + > + fan1-presence { > + label = "fan1-presence"; > + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; > + linux,code = <10>; > + }; > + > + fan2-presence { > + label = "fan2-presence"; > + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; > + linux,code = <11>; > + }; > + > + fan3-presence { > + label = "fan3-presence"; > + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; > + linux,code = <12>; > + }; > + > + fan4-presence { > + label = "fan4-presence"; > + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; > + linux,code = <13>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + front-fault { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; > + }; > + > + power-button { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; > + }; > + > + front-id { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; > + }; > + > + fan0 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; > + }; > + > + fan1 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; > + }; > + > + fan2 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; > + }; > + > + fan3 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; > + }; > + > + fan4 { > + retain-state-shutdown; > + default-state = "keep"; > + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + fsi: gpio-fsi { > + compatible = "fsi-master-gpio", "fsi-master"; > + #address-cells = <2>; > + #size-cells = <0>; > + no-gpio-delays; > + > + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; > + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; > + mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; > + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; > + trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; > + }; > + > + iio-hwmon-12v { > + compatible = "iio-hwmon"; > + io-channels = <&adc 0>; > + }; > + > + iio-hwmon-5v { > + compatible = "iio-hwmon"; > + io-channels = <&adc 1>; > + }; > + > + iio-hwmon-3v { > + compatible = "iio-hwmon"; > + io-channels = <&adc 2>; > + }; > + > + iio-hwmon-vdd { > + compatible = "iio-hwmon"; > + io-channels = <&adc 3>; > + }; > + > + iio-hwmon-vcs { > + compatible = "iio-hwmon"; > + io-channels = <&adc 5>; > + }; > + > + iio-hwmon-vdn { > + compatible = "iio-hwmon"; > + io-channels = <&adc 7>; > + }; > + > + iio-hwmon-vio { > + compatible = "iio-hwmon"; > + io-channels = <&adc 9>; > + }; > + > + iio-hwmon-vddra { > + compatible = "iio-hwmon"; > + io-channels = <&adc 11>; > + }; > + > + iio-hwmon-battery { > + compatible = "iio-hwmon"; > + io-channels = <&adc 12>; > + }; > + > + iio-hwmon-vddrb { > + compatible = "iio-hwmon"; > + io-channels = <&adc 13>; > + }; > +}; > + > +&pwm_tacho { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default > + &pinctrl_pwm2_default &pinctrl_pwm3_default > + &pinctrl_pwm4_default>; > + > + fan@0 { > + reg = <0x00>; > + aspeed,fan-tach-ch = /bits/ 8 <0x00>; > + }; > + > + fan@1 { > + reg = <0x01>; > + aspeed,fan-tach-ch = /bits/ 8 <0x01>; > + }; > + > + fan@2 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x02>; > + }; > + > + fan@3 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x03>; > + }; > + > + fan@4 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x04>; > + }; > + > + fan@5 { > + reg = <0x00>; > + aspeed,fan-tach-ch = /bits/ 8 <0x05>; > + }; > + > + fan@6 { > + reg = <0x01>; > + aspeed,fan-tach-ch = /bits/ 8 <0x06>; > + }; > + > + fan@7 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x07>; > + }; > + > + fan@8 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x08>; > + }; > + > + fan@9 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x09>; > + }; > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + label = "bmc"; > + m25p,fast-read; > + spi-max-frequency = <50000000>; > + partitions { > + #address-cells = < 1 >; > + #size-cells = < 1 >; > + compatible = "fixed-partitions"; > + u-boot@0 { > + reg = < 0 0x60000 >; > + label = "u-boot"; > + }; > + u-boot-env@60000 { > + reg = < 0x60000 0x20000 >; > + label = "u-boot-env"; > + }; > + obmc-ubi@80000 { > + reg = < 0x80000 0x1F80000 >; > + label = "obmc-ubi"; > + }; > + }; > + }; > + flash@1 { > + status = "okay"; > + label = "alt-bmc"; > + m25p,fast-read; > + spi-max-frequency = <50000000>; > + partitions { > + #address-cells = < 1 >; > + #size-cells = < 1 >; > + compatible = "fixed-partitions"; > + u-boot@0 { > + reg = < 0 0x60000 >; > + label = "alt-u-boot"; > + }; > + u-boot-env@60000 { > + reg = < 0x60000 0x20000 >; > + label = "alt-u-boot-env"; > + }; > + obmc-ubi@80000 { > + reg = < 0x80000 0x1F80000 >; > + label = "alt-obmc-ubi"; > + }; > + }; > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + label = "pnor"; > + m25p,fast-read; > + spi-max-frequency = <100000000>; > + }; > +}; > + > +&lpc_ctrl { > + status = "okay"; > + memory-region = <&flash_memory>; > + flash = <&spi1>; > +}; > + > +&uart1 { > + /* Rear RS-232 connector */ > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_nrts1_default > + &pinctrl_ndtr1_default > + &pinctrl_ndsr1_default > + &pinctrl_ncts1_default > + &pinctrl_ndcd1_default > + &pinctrl_nri1_default>; }; > + > +&uart2 { > + /* APSS */ > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; }; > + > +&uart5 { > + status = "okay"; > +}; > + > +&mac0 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii1_default>; > + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, > + <&syscon ASPEED_CLK_MAC1RCLK>; > + clock-names = "MACCLK", "RCLK"; > + use-ncsi; > +}; > + > +&mac1 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + tmp275@48 { > + compatible = "ti,tmp275"; > + reg = <0x48>; > + }; > +}; > + > +&i2c1 { > + status = "disabled"; > +}; > + > +&i2c2 { > + status = "okay"; > + > + /* CPU MFG CONN */ > + > +}; > + > +&i2c3 { > + status = "okay"; > + > + /* APSS */ > + /* CPLD */ > + > + /* PCA9516 (repeater) -> > + * CLK Buffer 9FGS9092 > + * Power Supply 0 > + * Power Supply 1 > + * PCA 9552 LED > + */ > + > + pca9552: pca9552@60 { > + compatible = "nxp,pca9552"; > + reg = <0x60>; > + #address-cells = <1>; > + #size-cells = <0>; > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@8 { > + reg = <8>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@9 { > + reg = <9>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@10 { > + reg = <10>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@11 { > + reg = <11>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@12 { > + reg = <12>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@13 { > + reg = <13>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@14 { > + reg = <14>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + gpio@15 { > + reg = <15>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + }; > + > + power-supply@68 { > + compatible = "ibm,cffps1"; > + reg = <0x68>; > + }; > + > + power-supply@69 { > + compatible = "ibm,cffps1"; > + reg = <0x69>; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + > + /* CP0 VDD & VCS : IR35221 */ > + /* CP0 VDN & VIO : IR35221 */ > + /* CP0 VDDR : IR35221 */ > + > + ir35221@28 { > + compatible = "infineon,ir35221"; > + reg = <0x28>; > + }; > + > + ir35221@29 { > + compatible = "infineon,ir35221"; > + reg = <0x29>; > + }; > + > + ir35221@2d { > + compatible = "infineon,ir35221"; > + reg = <0x2d>; > + }; > + > +}; > + > +&i2c5 { > + status = "disabled"; > +}; > + > +&i2c6 { > + status = "disabled"; > +}; > + > +&i2c7 { > + status = "disabled"; > +}; > + > +&i2c8 { > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > +}; > + > +&i2c9 { > + status = "okay"; > + > + /* PCIe G3 x16 slot */ > +}; > + > +&i2c10 { > + status = "disabled"; > +}; > + > +&i2c11 { > + status = "okay"; > + > + /* CPLD */ > + /* TPM */ > + /* RTC RX8900CE */ > + /* TMP275A */ > + /* TMP275A */ > + > + tmp275@48 { > + compatible = "ti,tmp275"; > + reg = <0x48>; > + }; > + > + tmp275@49 { > + compatible = "ti,tmp275"; > + reg = <0x49>; > + }; > + > +}; > + > +&i2c12 { > + status = "disabled"; > +}; > + > +&i2c13 { > + status = "disabled"; > +}; > + > +&vuart { > + status = "okay"; > +}; > + > +&gfx { > + status = "okay"; > + memory-region = <&gfx_memory>; }; > + > +&adc { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_default > + &pinctrl_adc1_default > + &pinctrl_adc2_default > + &pinctrl_adc3_default > + &pinctrl_adc4_default > + &pinctrl_adc5_default > + &pinctrl_adc6_default > + &pinctrl_adc7_default > + &pinctrl_adc8_default > + &pinctrl_adc9_default > + &pinctrl_adc10_default > + &pinctrl_adc11_default > + &pinctrl_adc12_default > + &pinctrl_adc13_default > + &pinctrl_adc14_default > + &pinctrl_adc15_default>; }; > + > +&wdt1 { > + aspeed,reset-type = "none"; > + aspeed,external-signal; > + aspeed,ext-push-pull; > + aspeed,ext-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdtrst1_default>; }; > + > +&wdt2 { > + aspeed,alt-boot; > +}; > + > +&ibt { > + status = "okay"; > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; }; > + > +#include "ibm-power9-dual.dtsi" > + > -- > 2.17.1 > > > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > ------------------- This email contains confidential or legally > privileged information and is for the sole use of its intended recipient. > Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. > If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately. > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > ------------------- _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-17 9:52 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-09 9:08 [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform Ben Pai 2020-09-09 9:08 ` Ben Pai 2020-09-09 9:08 ` Ben Pai 2020-09-11 5:34 ` Joel Stanley 2020-09-11 5:34 ` Joel Stanley 2020-09-17 9:44 ` Ben_Pai [this message] 2020-09-17 9:44 ` Ben_Pai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=6f5af09c8a6843628bf2855d55e9206f@wistron.com \ --to=ben_pai@wistron.com \ --cc=Claire_Ku@wistron.com \ --cc=andrew@aj.id.au \ --cc=devicetree@vger.kernel.org \ --cc=joel@jms.id.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.