From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> To: Daniel Baluta <daniel.baluta@oss.nxp.com>, broonie@kernel.org, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, festevam@gmail.com, linux-kernel@vger.kernel.org, linux-imx@nxp.com, Daniel Baluta <daniel.baluta@nxp.com> Subject: Re: [alsa-devel] [RESEND 0/4] Add a better separation between i.MX8 families Date: Mon, 10 Feb 2020 08:23:24 -0600 [thread overview] Message-ID: <73c72736-ca09-1501-4978-e0041b605aed@linux.intel.com> (raw) In-Reply-To: <20200210095817.13226-1-daniel.baluta@oss.nxp.com> On 2/10/20 3:58 AM, Daniel Baluta wrote: > From: Daniel Baluta <daniel.baluta@nxp.com> > > So far the implementation was designed to support a generic platform > named i.MX8. Anyhow, now working with specific i.MX8 instances we need > to account for the differences. > > i.MX8 naming can be confusing at the first glance, so we need to have > a clean separation between different platforms. > > Here is the split of i.MX8 per platforms. Notice that i.MX8 names > the entire family, but also a sub-family. > > imx8 > ├── imx8 > │ └── imx8qm (*) > ├── imx8m > │ ├── imx8mm > │ ├── imx8mn > │ ├── imx8mp (*) > │ └── imx8mq > └── imx8x > └── imx8qxp (*) > > Platforms marked with (*) contain a DSP. In the future there might be > more platforms. > > This patchseries does the following: > * renames imx8 to imx8x (because the only supported platform now > is imx8qxp). > * adds support for imx8 (which is imx8qm) > > Paul Olaru (4): > ASoC: SOF: Rename i.MX8 platform to i.MX8X > ASoC: SOF: imx8: Add ops for i.MX8QM > ASoC: SOF: Add i.MX8QM device descriptor > dt-bindings: dsp: fsl: Add fsl,imx8qm-dsp entry Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > > .../devicetree/bindings/dsp/fsl,dsp.yaml | 1 + > sound/soc/sof/imx/imx8.c | 57 ++++++++++++++++++- > sound/soc/sof/sof-of-dev.c | 10 ++++ > 3 files changed, 65 insertions(+), 3 deletions(-) >
WARNING: multiple messages have this Message-ID (diff)
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> To: Daniel Baluta <daniel.baluta@oss.nxp.com>, broonie@kernel.org, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, festevam@gmail.com, linux-kernel@vger.kernel.org, linux-imx@nxp.com, Daniel Baluta <daniel.baluta@nxp.com> Subject: Re: [alsa-devel] [RESEND 0/4] Add a better separation between i.MX8 families Date: Mon, 10 Feb 2020 08:23:24 -0600 [thread overview] Message-ID: <73c72736-ca09-1501-4978-e0041b605aed@linux.intel.com> (raw) In-Reply-To: <20200210095817.13226-1-daniel.baluta@oss.nxp.com> On 2/10/20 3:58 AM, Daniel Baluta wrote: > From: Daniel Baluta <daniel.baluta@nxp.com> > > So far the implementation was designed to support a generic platform > named i.MX8. Anyhow, now working with specific i.MX8 instances we need > to account for the differences. > > i.MX8 naming can be confusing at the first glance, so we need to have > a clean separation between different platforms. > > Here is the split of i.MX8 per platforms. Notice that i.MX8 names > the entire family, but also a sub-family. > > imx8 > ├── imx8 > │ └── imx8qm (*) > ├── imx8m > │ ├── imx8mm > │ ├── imx8mn > │ ├── imx8mp (*) > │ └── imx8mq > └── imx8x > └── imx8qxp (*) > > Platforms marked with (*) contain a DSP. In the future there might be > more platforms. > > This patchseries does the following: > * renames imx8 to imx8x (because the only supported platform now > is imx8qxp). > * adds support for imx8 (which is imx8qm) > > Paul Olaru (4): > ASoC: SOF: Rename i.MX8 platform to i.MX8X > ASoC: SOF: imx8: Add ops for i.MX8QM > ASoC: SOF: Add i.MX8QM device descriptor > dt-bindings: dsp: fsl: Add fsl,imx8qm-dsp entry Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > > .../devicetree/bindings/dsp/fsl,dsp.yaml | 1 + > sound/soc/sof/imx/imx8.c | 57 ++++++++++++++++++- > sound/soc/sof/sof-of-dev.c | 10 ++++ > 3 files changed, 65 insertions(+), 3 deletions(-) > _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2020-02-10 14:42 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-10 9:58 [RESEND 0/4] Add a better separation between i.MX8 families Daniel Baluta 2020-02-10 9:58 ` [alsa-devel] " Daniel Baluta 2020-02-10 9:58 ` [RESEND 1/4] ASoC: SOF: Rename i.MX8 platform to i.MX8X Daniel Baluta 2020-02-10 9:58 ` [alsa-devel] " Daniel Baluta 2020-02-11 15:49 ` Applied "ASoC: SOF: Rename i.MX8 platform to i.MX8X" to the asoc tree Mark Brown 2020-02-11 15:49 ` [alsa-devel] " Mark Brown 2020-02-10 9:58 ` [RESEND 2/4] ASoC: SOF: imx8: Add ops for i.MX8QM Daniel Baluta 2020-02-10 9:58 ` [alsa-devel] " Daniel Baluta 2020-02-11 15:49 ` Applied "ASoC: SOF: imx8: Add ops for i.MX8QM" to the asoc tree Mark Brown 2020-02-11 15:49 ` [alsa-devel] " Mark Brown 2020-02-10 9:58 ` [RESEND 3/4] ASoC: SOF: Add i.MX8QM device descriptor Daniel Baluta 2020-02-10 9:58 ` [alsa-devel] " Daniel Baluta 2020-02-11 15:49 ` Applied "ASoC: SOF: Add i.MX8QM device descriptor" to the asoc tree Mark Brown 2020-02-11 15:49 ` [alsa-devel] " Mark Brown 2020-02-10 9:58 ` [RESEND 4/4] dt-bindings: dsp: fsl: Add fsl,imx8qm-dsp entry Daniel Baluta 2020-02-10 9:58 ` [alsa-devel] [RESEND 4/4] dt-bindings: dsp: fsl: Add fsl, imx8qm-dsp entry Daniel Baluta 2020-02-19 22:14 ` [RESEND 4/4] dt-bindings: dsp: fsl: Add fsl,imx8qm-dsp entry Rob Herring 2020-02-19 22:14 ` Rob Herring 2020-03-12 21:16 ` Daniel Baluta 2020-03-12 21:16 ` Daniel Baluta 2020-02-10 14:23 ` Pierre-Louis Bossart [this message] 2020-02-10 14:23 ` [alsa-devel] [RESEND 0/4] Add a better separation between i.MX8 families Pierre-Louis Bossart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=73c72736-ca09-1501-4978-e0041b605aed@linux.intel.com \ --to=pierre-louis.bossart@linux.intel.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=daniel.baluta@nxp.com \ --cc=daniel.baluta@oss.nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.