From: James Hogan <james.hogan@imgtec.com> To: <linux-mips@linux-mips.org>, <kvm@vger.kernel.org> Cc: "James Hogan" <james.hogan@imgtec.com>, "Paolo Bonzini" <pbonzini@redhat.com>, "Radim Krčmář" <rkrcmar@redhat.com>, "Ralf Baechle" <ralf@linux-mips.org> Subject: [PATCH v2 23/33] KVM: MIPS: Update exit handler for VZ Date: Tue, 14 Mar 2017 10:15:30 +0000 [thread overview] Message-ID: <78d149c2db28076d1adff84980aca7cba9144514.1489485940.git-series.james.hogan@imgtec.com> (raw) In-Reply-To: <cover.26e10ec77a4ed0d3177ccf4fabf57bc95ea030f8.1489485940.git-series.james.hogan@imgtec.com> The general guest exit handler needs a few tweaks for VZ compared to trap & emulate, which for now are made directly depending on CONFIG_KVM_MIPS_VZ: - There is no need to re-enable the hardware page table walker (HTW), as it can be left enabled during guest mode operation with VZ. - There is no need to perform a privilege check, as any guest privilege violations should have already been detected by the hardware and triggered the appropriate guest exception. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org --- arch/mips/kvm/mips.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 1fa088854cb6..8c10148a345c 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -1230,7 +1230,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu) vcpu->mode = OUTSIDE_GUEST_MODE; /* re-enable HTW before enabling interrupts */ - htw_start(); + if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) + htw_start(); /* Set a default exit reason */ run->exit_reason = KVM_EXIT_UNKNOWN; @@ -1248,17 +1249,20 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu) cause, opc, run, vcpu); trace_kvm_exit(vcpu, exccode); - /* - * Do a privilege check, if in UM most of these exit conditions end up - * causing an exception to be delivered to the Guest Kernel - */ - er = kvm_mips_check_privilege(cause, opc, run, vcpu); - if (er == EMULATE_PRIV_FAIL) { - goto skip_emul; - } else if (er == EMULATE_FAIL) { - run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - ret = RESUME_HOST; - goto skip_emul; + if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) { + /* + * Do a privilege check, if in UM most of these exit conditions + * end up causing an exception to be delivered to the Guest + * Kernel + */ + er = kvm_mips_check_privilege(cause, opc, run, vcpu); + if (er == EMULATE_PRIV_FAIL) { + goto skip_emul; + } else if (er == EMULATE_FAIL) { + run->exit_reason = KVM_EXIT_INTERNAL_ERROR; + ret = RESUME_HOST; + goto skip_emul; + } } switch (exccode) { @@ -1418,7 +1422,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu) } /* Disable HTW before returning to guest or host */ - htw_stop(); + if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) + htw_stop(); return ret; } -- git-series 0.8.10
WARNING: multiple messages have this Message-ID (diff)
From: James Hogan <james.hogan@imgtec.com> To: linux-mips@linux-mips.org, kvm@vger.kernel.org Cc: "James Hogan" <james.hogan@imgtec.com>, "Paolo Bonzini" <pbonzini@redhat.com>, "Radim Krčmář" <rkrcmar@redhat.com>, "Ralf Baechle" <ralf@linux-mips.org> Subject: [PATCH v2 23/33] KVM: MIPS: Update exit handler for VZ Date: Tue, 14 Mar 2017 10:15:30 +0000 [thread overview] Message-ID: <78d149c2db28076d1adff84980aca7cba9144514.1489485940.git-series.james.hogan@imgtec.com> (raw) Message-ID: <20170314101530.QGkYcr8bqkhtVu2EqNzVNqdFD3-HBTnI-YcitHi98Lw@z> (raw) In-Reply-To: <cover.26e10ec77a4ed0d3177ccf4fabf57bc95ea030f8.1489485940.git-series.james.hogan@imgtec.com> The general guest exit handler needs a few tweaks for VZ compared to trap & emulate, which for now are made directly depending on CONFIG_KVM_MIPS_VZ: - There is no need to re-enable the hardware page table walker (HTW), as it can be left enabled during guest mode operation with VZ. - There is no need to perform a privilege check, as any guest privilege violations should have already been detected by the hardware and triggered the appropriate guest exception. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org --- arch/mips/kvm/mips.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 1fa088854cb6..8c10148a345c 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -1230,7 +1230,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu) vcpu->mode = OUTSIDE_GUEST_MODE; /* re-enable HTW before enabling interrupts */ - htw_start(); + if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) + htw_start(); /* Set a default exit reason */ run->exit_reason = KVM_EXIT_UNKNOWN; @@ -1248,17 +1249,20 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu) cause, opc, run, vcpu); trace_kvm_exit(vcpu, exccode); - /* - * Do a privilege check, if in UM most of these exit conditions end up - * causing an exception to be delivered to the Guest Kernel - */ - er = kvm_mips_check_privilege(cause, opc, run, vcpu); - if (er == EMULATE_PRIV_FAIL) { - goto skip_emul; - } else if (er == EMULATE_FAIL) { - run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - ret = RESUME_HOST; - goto skip_emul; + if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) { + /* + * Do a privilege check, if in UM most of these exit conditions + * end up causing an exception to be delivered to the Guest + * Kernel + */ + er = kvm_mips_check_privilege(cause, opc, run, vcpu); + if (er == EMULATE_PRIV_FAIL) { + goto skip_emul; + } else if (er == EMULATE_FAIL) { + run->exit_reason = KVM_EXIT_INTERNAL_ERROR; + ret = RESUME_HOST; + goto skip_emul; + } } switch (exccode) { @@ -1418,7 +1422,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu) } /* Disable HTW before returning to guest or host */ - htw_stop(); + if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) + htw_stop(); return ret; } -- git-series 0.8.10
next prev parent reply other threads:[~2017-03-14 10:27 UTC|newest] Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-14 10:15 [PATCH v2 0/33] KVM: MIPS: Add VZ support James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 1/33] MIPS: Add defs & probing of UFR James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 2/33] MIPS: Separate MAAR V bit into VL and VH for XPA James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 3/33] MIPS: Probe guest CP0_UserLocal James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 4/33] MIPS: Probe guest MVH James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 5/33] MIPS: Add some missing guest CP0 accessors & defs James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 6/33] MIPS: asm/tlb.h: Add UNIQUE_GUEST_ENTRYHI() macro James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 7/33] KVM: MIPS: Implement HYPCALL emulation James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 8/33] KVM: MIPS/Emulate: De-duplicate MMIO emulation James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 9/33] KVM: MIPS/Emulate: Implement 64-bit " James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 10/33] KVM: MIPS: Update kvm_lose_fpu() for VZ James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 11/33] KVM: MIPS: Extend counters & events for VZ GExcCodes James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 12/33] KVM: MIPS: Add VZ & TE capabilities James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 13/33] KVM: MIPS: Add 64BIT capability James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 14/33] KVM: MIPS: Init timer frequency from callback James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 15/33] KVM: MIPS: Add callback to check extension James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 16/33] KVM: MIPS: Add hardware_{enable,disable} callback James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 17/33] KVM: MIPS: Add guest exit exception callback James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 18/33] KVM: MIPS: Abstract guest CP0 register access for VZ James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 19/33] KVM: MIPS/Entry: Update entry code to support VZ James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 20/33] KVM: MIPS/TLB: Add VZ TLB management James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 21/33] KVM: MIPS/Emulate: Update CP0_Compare emulation for VZ James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 22/33] KVM: MIPS/Emulate: Drop CACHE " James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` James Hogan [this message] 2017-03-14 10:15 ` [PATCH v2 23/33] KVM: MIPS: Update exit handler " James Hogan 2017-03-14 10:15 ` [PATCH v2 24/33] KVM: MIPS: Implement VZ support James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 25/33] KVM: MIPS: Add VZ support to build system James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-16 11:40 ` kbuild test robot 2017-03-16 11:40 ` kbuild test robot 2017-03-16 12:50 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 26/33] KVM: MIPS/VZ: Support guest CP0_BadInstr[P] James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 27/33] KVM: MIPS/VZ: Support guest CP0_[X]ContextConfig James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 28/33] KVM: MIPS/VZ: Support guest segmentation control James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 29/33] KVM: MIPS/VZ: Support guest hardware page table walker James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 30/33] KVM: MIPS/VZ: Support guest load-linked bit James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 31/33] KVM: MIPS/VZ: Emulate MAARs when necessary James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 32/33] KVM: MIPS/VZ: Support hardware guest timer James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-14 10:15 ` [PATCH v2 33/33] KVM: MIPS/VZ: Trace guest mode changes James Hogan 2017-03-14 10:15 ` James Hogan 2017-03-15 16:32 ` [PATCH v2 0/33] KVM: MIPS: Add VZ support Ralf Baechle
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=78d149c2db28076d1adff84980aca7cba9144514.1489485940.git-series.james.hogan@imgtec.com \ --to=james.hogan@imgtec.com \ --cc=kvm@vger.kernel.org \ --cc=linux-mips@linux-mips.org \ --cc=pbonzini@redhat.com \ --cc=ralf@linux-mips.org \ --cc=rkrcmar@redhat.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.