Re: [PATCH v2 2/2] thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe

From: 陈康 <void0red@hust.edu.cn>
To: daniel.lezcano@linaro.org
Cc: amitk@kernel.org, angelogioacchino.delregno@collabora.com,
	bchihi@baylibre.com, daniel@makrotopia.org, dzm91@hust.edu.cn,
	error27@gmail.com, henry.yen@mediatek.com,
	hust-os-kernel-patches@googlegroups.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	linux-pm@vger.kernel.org, matthias.bgg@gmail.com,
	rafael@kernel.org, rdunlap@infradead.org, rui.zhang@intel.com,
	void0red@gmail.com
Subject: Re: [PATCH v2 2/2] thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
Date: Mon, 10 Apr 2023 11:46:17 +0800 (GMT+08:00)	[thread overview]
Message-ID: <7b1f01ae.3988f.18769458aaf.Coremail.void0red@hust.edu.cn> (raw)
In-Reply-To: <20230403164610.3608082-2-void0red@hust.edu.cn>

> -----原始邮件-----
> 发件人: "Kang Chen" <void0red@hust.edu.cn>
> 发送时间: 2023-04-04 00:46:10 (星期二)
> 收件人: daniel.lezcano@linaro.org
> 抄送: amitk@kernel.org, angelogioacchino.delregno@collabora.com, bchihi@baylibre.com, daniel@makrotopia.org, dzm91@hust.edu.cn, error27@gmail.com, henry.yen@mediatek.com, hust-os-kernel-patches@googlegroups.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-pm@vger.kernel.org, matthias.bgg@gmail.com, rafael@kernel.org, rdunlap@infradead.org, rui.zhang@intel.com, void0red@gmail.com, void0red@hust.edu.cn
> 主题: [PATCH v2 2/2] thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
> 
> use devm_clk_get_enabled to do automatic resource management.
> 
> Signed-off-by: Kang Chen <void0red@hust.edu.cn>
> ---
> I'm not quite sure if this function should return 0 when
> devm_thermal_add_hwmon_sysfs occurs error. So I keep it.
> 
>  drivers/thermal/mediatek/auxadc_thermal.c | 25 ++++++++---------------
>  1 file changed, 8 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
> index df5e2e354408..5baec2c08ebc 100644
> --- a/drivers/thermal/mediatek/auxadc_thermal.c
> +++ b/drivers/thermal/mediatek/auxadc_thermal.c
> @@ -1178,16 +1178,16 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	ret = clk_prepare_enable(mt->clk_auxadc);
> -	if (ret) {
> +	ret = devm_clk_get_enabled(&pdev->dev, mt->clk_auxadc);
> +	if (IS_ERR(ret)) {
>  		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
> -		return ret;
> +		return PTR_ERR(ret);
>  	}
>  
> -	ret = clk_prepare_enable(mt->clk_peri_therm);
> -	if (ret) {
> +	ret = devm_clk_get_enabled(&pdev->dev, mt->clk_peri_therm);
> +	if (IS_ERR(ret)) {
>  		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
> -		goto err_disable_clk_auxadc;
> +		return PTR_ERR(ret);
>  	}
>  
>  	if (mt->conf->version != MTK_THERMAL_V1) {
> @@ -1211,23 +1211,14 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  
>  	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
>  					      &mtk_thermal_ops);
> -	if (IS_ERR(tzdev)) {
> -		ret = PTR_ERR(tzdev);
> -		goto err_disable_clk_peri_therm;
> -	}
> +	if (IS_ERR(tzdev))
> +		return PTR_ERR(tzdev);
>  
>  	ret = devm_thermal_add_hwmon_sysfs(tzdev);
>  	if (ret)
>  		dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
>  
>  	return 0;
> -
> -err_disable_clk_peri_therm:
> -	clk_disable_unprepare(mt->clk_peri_therm);
> -err_disable_clk_auxadc:
> -	clk_disable_unprepare(mt->clk_auxadc);
> -
> -	return ret;
>  }
>  
>  static int mtk_thermal_remove(struct platform_device *pdev)
> -- 
> 2.34.1

ping?