From: BALATON Zoltan <balaton@eik.bme.hu>
To: qemu-devel@nongnu.org, qemu-ppc@nongnu.org
Cc: clg@kaod.org, Daniel Henrique Barboza <danielhb413@gmail.com>,
Peter Maydell <peter.maydell@linaro.org>
Subject: [PATCH v4 07/21] ppc4xx_sdram: QOM'ify
Date: Wed, 14 Sep 2022 13:34:20 +0200 (CEST) [thread overview]
Message-ID: <7de9af687ffc9e6a2d7b6e2a0313f32ee7bdde8c.1663154398.git.balaton@eik.bme.hu> (raw)
In-Reply-To: <cover.1663154398.git.balaton@eik.bme.hu>
Change the ppc4xx_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr. This is mostly
modelling the DDR SDRAM controller found in the 440EP (used on the
bamboo board) but also backward compatible with the older DDR
controllers on some 405 SoCs so we also use it for those now. This
likely does not cause problems for guests we run as the new features
are just not accessed but to model 405 SoC accurately some features
may have to be disabled or the model split between 440 and older.
Newer SoCs (regardless of their PPC core, e.g. 405EX) may have an
updated DDR2 SDRAM controller implemented by the ppc440_sdram model
(only partially, enough for the 460EX on the sam460ex) that is not yet
QOM'ified in this patch. That is intended to become ppc4xx-sdram-ddr2
when QOM'ified later.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
---
hw/ppc/ppc405.h | 3 +-
hw/ppc/ppc405_uc.c | 22 +++++----
hw/ppc/ppc440_bamboo.c | 10 +++--
hw/ppc/ppc4xx_devs.c | 99 ++++++++++++++++++++++-------------------
include/hw/ppc/ppc4xx.h | 27 +++++++++--
5 files changed, 98 insertions(+), 63 deletions(-)
diff --git a/hw/ppc/ppc405.h b/hw/ppc/ppc405.h
index ad54dff542..9a4312691e 100644
--- a/hw/ppc/ppc405.h
+++ b/hw/ppc/ppc405.h
@@ -167,8 +167,6 @@ struct Ppc405SoCState {
DeviceState parent_obj;
/* Public */
- MemoryRegion *dram_mr;
-
PowerPCCPU cpu;
PPCUIC uic;
Ppc405CpcState cpc;
@@ -182,6 +180,7 @@ struct Ppc405SoCState {
Ppc405PobState pob;
Ppc4xxPlbState plb;
Ppc4xxMalState mal;
+ Ppc4xxSdramDdrState sdram;
};
#endif /* PPC405_H */
diff --git a/hw/ppc/ppc405_uc.c b/hw/ppc/ppc405_uc.c
index e1c7188e61..c973cfb04e 100644
--- a/hw/ppc/ppc405_uc.c
+++ b/hw/ppc/ppc405_uc.c
@@ -1016,6 +1016,9 @@ static void ppc405_soc_instance_init(Object *obj)
object_initialize_child(obj, "plb", &s->plb, TYPE_PPC4xx_PLB);
object_initialize_child(obj, "mal", &s->mal, TYPE_PPC4xx_MAL);
+
+ object_initialize_child(obj, "sdram", &s->sdram, TYPE_PPC4xx_SDRAM_DDR);
+ object_property_add_alias(obj, "dram", OBJECT(&s->sdram), "dram");
}
static void ppc405_reset(void *opaque)
@@ -1073,9 +1076,17 @@ static void ppc405_soc_realize(DeviceState *dev, Error **errp)
qdev_get_gpio_in(DEVICE(&s->cpu), PPC40x_INPUT_CINT));
/* SDRAM controller */
+ /*
+ * We use the 440 DDR SDRAM controller which has more regs and features
+ * but it's compatible enough for now
+ */
+ object_property_set_int(OBJECT(&s->sdram), "nbanks", 2, &error_abort);
+ if (!ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(&s->sdram), &s->cpu, errp)) {
+ return;
+ }
/* XXX 405EP has no ECC interrupt */
- ppc4xx_sdram_init(env, qdev_get_gpio_in(DEVICE(&s->uic), 17), 1,
- s->dram_mr);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdram), 0,
+ qdev_get_gpio_in(DEVICE(&s->uic), 17));
/* External bus controller */
if (!ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(&s->ebc), &s->cpu, errp)) {
@@ -1150,12 +1161,6 @@ static void ppc405_soc_realize(DeviceState *dev, Error **errp)
/* Uses UIC IRQs 9, 15, 17 */
}
-static Property ppc405_soc_properties[] = {
- DEFINE_PROP_LINK("dram", Ppc405SoCState, dram_mr, TYPE_MEMORY_REGION,
- MemoryRegion *),
- DEFINE_PROP_END_OF_LIST(),
-};
-
static void ppc405_soc_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
@@ -1163,7 +1168,6 @@ static void ppc405_soc_class_init(ObjectClass *oc, void *data)
dc->realize = ppc405_soc_realize;
/* Reason: only works as part of a ppc405 board/machine */
dc->user_creatable = false;
- device_class_set_props(dc, ppc405_soc_properties);
}
static const TypeInfo ppc405_types[] = {
diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
index 9b456f1819..6052d3a2e0 100644
--- a/hw/ppc/ppc440_bamboo.c
+++ b/hw/ppc/ppc440_bamboo.c
@@ -48,8 +48,6 @@
#define PPC440EP_PCI_IO 0xe8000000
#define PPC440EP_PCI_IOLEN 0x00010000
-#define PPC440EP_SDRAM_NR_BANKS 4
-
static hwaddr entry;
static int bamboo_load_device_tree(hwaddr addr,
@@ -198,9 +196,13 @@ static void bamboo_init(MachineState *machine)
qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_CINT));
/* SDRAM controller */
+ dev = qdev_new(TYPE_PPC4xx_SDRAM_DDR);
+ object_property_set_link(OBJECT(dev), "dram", OBJECT(machine->ram),
+ &error_abort);
+ ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(dev), cpu, &error_fatal);
+ object_unref(OBJECT(dev));
/* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
- ppc4xx_sdram_init(env, qdev_get_gpio_in(uicdev, 14),
- PPC440EP_SDRAM_NR_BANKS, machine->ram);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(uicdev, 14));
/* Enable SDRAM memory regions, this should be done by the firmware */
if (ppc_dcr_write(env->dcr_env, SDRAM0_CFGADDR, 0x20) ||
ppc_dcr_write(env->dcr_env, SDRAM0_CFGDATA, 0x80000000)) {
diff --git a/hw/ppc/ppc4xx_devs.c b/hw/ppc/ppc4xx_devs.c
index eb3aa97b16..375834a52b 100644
--- a/hw/ppc/ppc4xx_devs.c
+++ b/hw/ppc/ppc4xx_devs.c
@@ -38,30 +38,12 @@
/*****************************************************************************/
/* SDRAM controller */
-typedef struct ppc4xx_sdram_t ppc4xx_sdram_t;
-struct ppc4xx_sdram_t {
- uint32_t addr;
- int nbanks; /* Banks to use from the 4, e.g. when board has less slots */
- Ppc4xxSdramBank bank[4];
- uint32_t besr0;
- uint32_t besr1;
- uint32_t bear;
- uint32_t cfg;
- uint32_t status;
- uint32_t rtr;
- uint32_t pmit;
- uint32_t tr;
- uint32_t ecccfg;
- uint32_t eccesr;
- qemu_irq irq;
-};
-
/*
* XXX: TOFIX: some patches have made this code become inconsistent:
* there are type inconsistencies, mixing hwaddr, target_ulong
* and uint32_t
*/
-static uint32_t sdram_bcr(hwaddr ram_base, hwaddr ram_size)
+static uint32_t sdram_ddr_bcr(hwaddr ram_base, hwaddr ram_size)
{
uint32_t bcr;
@@ -119,7 +101,7 @@ static target_ulong sdram_size(uint32_t bcr)
return size;
}
-static void sdram_set_bcr(ppc4xx_sdram_t *sdram, int i,
+static void sdram_set_bcr(Ppc4xxSdramDdrState *sdram, int i,
uint32_t bcr, int enabled)
{
if (sdram->bank[i].bcr & 0x00000001) {
@@ -145,21 +127,21 @@ static void sdram_set_bcr(ppc4xx_sdram_t *sdram, int i,
}
}
-static void sdram_map_bcr(ppc4xx_sdram_t *sdram)
+static void sdram_map_bcr(Ppc4xxSdramDdrState *sdram)
{
int i;
for (i = 0; i < sdram->nbanks; i++) {
if (sdram->bank[i].size != 0) {
- sdram_set_bcr(sdram, i, sdram_bcr(sdram->bank[i].base,
- sdram->bank[i].size), 1);
+ sdram_set_bcr(sdram, i, sdram_ddr_bcr(sdram->bank[i].base,
+ sdram->bank[i].size), 1);
} else {
sdram_set_bcr(sdram, i, 0x00000000, 0);
}
}
}
-static void sdram_unmap_bcr(ppc4xx_sdram_t *sdram)
+static void sdram_unmap_bcr(Ppc4xxSdramDdrState *sdram)
{
int i;
@@ -171,12 +153,11 @@ static void sdram_unmap_bcr(ppc4xx_sdram_t *sdram)
}
}
-static uint32_t dcr_read_sdram(void *opaque, int dcrn)
+static uint32_t sdram_ddr_dcr_read(void *opaque, int dcrn)
{
- ppc4xx_sdram_t *sdram;
+ Ppc4xxSdramDdrState *sdram = opaque;
uint32_t ret;
- sdram = opaque;
switch (dcrn) {
case SDRAM0_CFGADDR:
ret = sdram->addr;
@@ -239,11 +220,10 @@ static uint32_t dcr_read_sdram(void *opaque, int dcrn)
return ret;
}
-static void dcr_write_sdram(void *opaque, int dcrn, uint32_t val)
+static void sdram_ddr_dcr_write(void *opaque, int dcrn, uint32_t val)
{
- ppc4xx_sdram_t *sdram;
+ Ppc4xxSdramDdrState *sdram = opaque;
- sdram = opaque;
switch (dcrn) {
case SDRAM0_CFGADDR:
sdram->addr = val;
@@ -322,11 +302,10 @@ static void dcr_write_sdram(void *opaque, int dcrn, uint32_t val)
}
}
-static void sdram_reset(void *opaque)
+static void ppc4xx_sdram_ddr_reset(DeviceState *dev)
{
- ppc4xx_sdram_t *sdram;
+ Ppc4xxSdramDdrState *sdram = PPC4xx_SDRAM_DDR(dev);
- sdram = opaque;
sdram->addr = 0x00000000;
sdram->bear = 0x00000000;
sdram->besr0 = 0x00000000; /* No error */
@@ -342,23 +321,48 @@ static void sdram_reset(void *opaque)
sdram->cfg = 0x00800000;
}
-void ppc4xx_sdram_init(CPUPPCState *env, qemu_irq irq, int nbanks,
- MemoryRegion *ram)
+static void ppc4xx_sdram_ddr_realize(DeviceState *dev, Error **errp)
{
- ppc4xx_sdram_t *sdram;
+ Ppc4xxSdramDdrState *s = PPC4xx_SDRAM_DDR(dev);
+ Ppc4xxDcrDeviceState *dcr = PPC4xx_DCR_DEVICE(dev);
const ram_addr_t valid_bank_sizes[] = {
256 * MiB, 128 * MiB, 64 * MiB, 32 * MiB, 16 * MiB, 8 * MiB, 4 * MiB, 0
};
- sdram = g_new0(ppc4xx_sdram_t, 1);
- sdram->irq = irq;
- sdram->nbanks = nbanks;
- ppc4xx_sdram_banks(ram, sdram->nbanks, sdram->bank, valid_bank_sizes);
- qemu_register_reset(&sdram_reset, sdram);
- ppc_dcr_register(env, SDRAM0_CFGADDR,
- sdram, &dcr_read_sdram, &dcr_write_sdram);
- ppc_dcr_register(env, SDRAM0_CFGDATA,
- sdram, &dcr_read_sdram, &dcr_write_sdram);
+ if (s->nbanks < 1 || s->nbanks > 4) {
+ error_setg(errp, "Invalid number of RAM banks");
+ return;
+ }
+ if (!s->dram_mr) {
+ error_setg(errp, "Missing dram memory region");
+ return;
+ }
+ ppc4xx_sdram_banks(s->dram_mr, s->nbanks, s->bank, valid_bank_sizes);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+
+ ppc4xx_dcr_register(dcr, SDRAM0_CFGADDR,
+ s, &sdram_ddr_dcr_read, &sdram_ddr_dcr_write);
+ ppc4xx_dcr_register(dcr, SDRAM0_CFGDATA,
+ s, &sdram_ddr_dcr_read, &sdram_ddr_dcr_write);
+}
+
+static Property ppc4xx_sdram_ddr_props[] = {
+ DEFINE_PROP_LINK("dram", Ppc4xxSdramDdrState, dram_mr, TYPE_MEMORY_REGION,
+ MemoryRegion *),
+ DEFINE_PROP_UINT32("nbanks", Ppc4xxSdramDdrState, nbanks, 4),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ppc4xx_sdram_ddr_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = ppc4xx_sdram_ddr_realize;
+ dc->reset = ppc4xx_sdram_ddr_reset;
+ /* Reason: only works as function of a ppc4xx SoC */
+ dc->user_creatable = false;
+ device_class_set_props(dc, ppc4xx_sdram_ddr_props);
}
/*
@@ -948,6 +952,11 @@ static void ppc4xx_dcr_class_init(ObjectClass *oc, void *data)
static const TypeInfo ppc4xx_types[] = {
{
+ .name = TYPE_PPC4xx_SDRAM_DDR,
+ .parent = TYPE_PPC4xx_DCR_DEVICE,
+ .instance_size = sizeof(Ppc4xxSdramDdrState),
+ .class_init = ppc4xx_sdram_ddr_class_init,
+ }, {
.name = TYPE_PPC4xx_MAL,
.parent = TYPE_PPC4xx_DCR_DEVICE,
.instance_size = sizeof(Ppc4xxMalState),
diff --git a/include/hw/ppc/ppc4xx.h b/include/hw/ppc/ppc4xx.h
index 6007a8dd04..20d0cdde8a 100644
--- a/include/hw/ppc/ppc4xx.h
+++ b/include/hw/ppc/ppc4xx.h
@@ -46,9 +46,6 @@ void ppc4xx_sdram_banks(MemoryRegion *ram, int nr_banks,
Ppc4xxSdramBank ram_banks[],
const ram_addr_t sdram_bank_sizes[]);
-void ppc4xx_sdram_init(CPUPPCState *env, qemu_irq irq, int nbanks,
- MemoryRegion *ram);
-
#define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pcihost"
/*
@@ -118,4 +115,28 @@ struct Ppc4xxEbcState {
uint32_t cfg;
};
+/* SDRAM DDR controller */
+#define TYPE_PPC4xx_SDRAM_DDR "ppc4xx-sdram-ddr"
+OBJECT_DECLARE_SIMPLE_TYPE(Ppc4xxSdramDdrState, PPC4xx_SDRAM_DDR);
+struct Ppc4xxSdramDdrState {
+ Ppc4xxDcrDeviceState parent_obj;
+
+ MemoryRegion *dram_mr;
+ uint32_t nbanks; /* Banks to use from 4, e.g. when board has less slots */
+ Ppc4xxSdramBank bank[4];
+ qemu_irq irq;
+
+ uint32_t addr;
+ uint32_t besr0;
+ uint32_t besr1;
+ uint32_t bear;
+ uint32_t cfg;
+ uint32_t status;
+ uint32_t rtr;
+ uint32_t pmit;
+ uint32_t tr;
+ uint32_t ecccfg;
+ uint32_t eccesr;
+};
+
#endif /* PPC4XX_H */
--
2.30.4
next prev parent reply other threads:[~2022-09-14 11:52 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-14 11:34 [PATCH v4 00/21] ppc4xx_sdram QOMify and clean ups BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 01/21] ppc440_bamboo: Remove unnecessary memsets BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 02/21] ppc4xx: Introduce Ppc4xxSdramBank struct BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 03/21] ppc4xx_sdram: Get rid of the init RAM hack BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 04/21] ppc4xx: Use Ppc4xxSdramBank in ppc4xx_sdram_banks() BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 05/21] ppc440_bamboo: Add missing 4 MiB valid memory size BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 06/21] ppc4xx_sdram: Move size check to ppc4xx_sdram_init() BALATON Zoltan
2022-09-17 21:54 ` Philippe Mathieu-Daudé via
2022-09-14 11:34 ` BALATON Zoltan [this message]
2022-09-14 11:34 ` [PATCH v4 08/21] ppc4xx_sdram: Drop extra zeros for readability BALATON Zoltan
2022-09-17 22:12 ` Philippe Mathieu-Daudé via
2022-09-14 11:34 ` [PATCH v4 09/21] ppc440_sdram: Split off map/unmap of sdram banks for later reuse BALATON Zoltan
2022-09-17 22:14 ` Philippe Mathieu-Daudé via
2022-09-14 11:34 ` [PATCH v4 10/21] ppc440_sdram: Implement enable bit in the DDR2 SDRAM BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 11/21] ppc440_sdram: Get rid of the init RAM hack BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 12/21] ppc440_sdram: Rename local variable for readability BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 13/21] ppc4xx_sdram: Rename functions to prevent name clashes BALATON Zoltan
2022-09-17 22:15 ` Philippe Mathieu-Daudé via
2022-09-14 11:34 ` [PATCH v4 14/21] ppc440_sdram: Move RAM size check to ppc440_sdram_init BALATON Zoltan
2022-09-17 22:16 ` Philippe Mathieu-Daudé via
2022-09-18 9:59 ` BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 15/21] ppc440_sdram: QOM'ify BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 16/21] ppc4xx_sdram: Move ppc4xx DDR and DDR2 SDRAM controller models together BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 17/21] ppc4xx_sdram: Use hwaddr for memory bank size BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 18/21] ppc4xx_sdram: Rename local state variable for brevity BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 19/21] ppc4xx_sdram: Generalise bank setup BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 20/21] ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling BALATON Zoltan
2022-09-14 11:34 ` [PATCH v4 21/21] ppc4xx_sdram: Add errp parameter to ppc4xx_sdram_banks() BALATON Zoltan
2022-09-17 22:18 ` Philippe Mathieu-Daudé via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7de9af687ffc9e6a2d7b6e2a0313f32ee7bdde8c.1663154398.git.balaton@eik.bme.hu \
--to=balaton@eik.bme.hu \
--cc=clg@kaod.org \
--cc=danielhb413@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.