All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>,
	"Vetter, Daniel" <daniel.vetter@intel.com>,
	David Henningsson <david.henningsson@canonical.com>
Subject: Re: [PATCH 4/4] ALSA: hda - Wake the codec up on pin/ELD	notify events
Date: Thu, 26 Nov 2015 06:06:56 +0000	[thread overview]
Message-ID: <8082FF9BCB2B054996454E47167FF4EC0B0F2834@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <s5hbnaiiazu.wl-tiwai@suse.de>

> On Wed, 25 Nov 2015 11:57:13 +0100,
> Zhang, Xiong Y wrote:
> >
> > > On Wed, 25 Nov 2015 10:56:51 +0100,
> > > Zhang, Xiong Y wrote:
> > > >
> > > > Recently I always see the following error message during S4 or S3 resume
> > > with drm-intel-nightly.
> > > > [   97.778063] PM: Syncing filesystems ... done.
> > > > [   97.801550] Freezing user space processes ... (elapsed 0.002 seconds)
> > > done.
> > > > [   97.804297] PM: Marking nosave pages: [mem
> 0x00000000-0x00000fff]
> > > > [   97.804302] PM: Marking nosave pages: [mem
> 0x00058000-0x00058fff]
> > > > [   97.804305] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
> > > > [   97.804310] PM: Marking nosave pages: [mem
> 0x84c11000-0x84c12fff]
> > > > [   97.804312] PM: Marking nosave pages: [mem
> 0x876fc000-0x87746fff]
> > > > [   97.804317] PM: Marking nosave pages: [mem
> 0x8785e000-0x87fe9fff]
> > > > [   97.804387] PM: Marking nosave pages: [mem 0x88000000-0xffffffff]
> > > > [   97.806363] PM: Basic memory bitmaps created
> > > > [   97.806409] PM: Preallocating image memory... done (allocated
> 321557
> > > pages)
> > > > [   98.150475] PM: Allocated 1286228 kbytes in 0.34 seconds (3783.02
> > > MB/s)
> > > > [   98.150476] Freezing remaining freezable tasks ... (elapsed 0.001
> seconds)
> > > done.
> > > > [   98.151998] Suspending console(s) (use no_console_suspend to
> debug)
> > > > [   98.173485] hdmi_present_sense: snd_hda_codec_hdmi
> hdaudioC0D2:
> > > HDMI status: Codec=2 Pin=6 Presence_Detect=1 ELD_Valid=1
> > > > [   99.178150] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178151] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178151] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178152] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178152] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178153] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178153] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178154] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178154] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178155] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
> last
> > > cmd=0x206f2e08
> > > > [   99.178162] snd_hda_codec_hdmi hdaudioC0D2: HDMI: ELD buf size
> is 0,
> > > force 128
> > > > [  101.189709] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
> > > switching to polling mode: last cmd=0x206f2f00
> > > > [  102.195492] snd_hda_intel 0000:00:1f.3: No response from codec,
> > > disabling MSI: last cmd=0x206f2f00
> > > > [  103.201275] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
> > > switching to single_cmd mode: last cmd=0x206f2f00
> > > > [  103.201396] azx_single_wait_for_response: 42 callbacks suppressed
> > > >
> > > > The bisect result points to this commit.
> > > > I checked this patch and had one question: if i915 driver wake up ahead of
> > > snd_hda_intel driver during resume,  i915 driver will call audio driver's
> > > hdmi_present_sense() function through this patch, but the audio interrupt
> is
> > > disabled at this moment, how could hdmi_present_sense() get the
> response
> > > from codec ?
> > >
> > > Yeah, a bad thing happens there.  The fix should be simple like below,
> > > though.  Basically the pins are checked in the resume callback in
> > > anyway, so there is no need to handle the notification during PM.
> > >
> > > Could you check whether it works?
> > >
> > >
> > > thanks,
> > >
> > > Takashi
> >
> > Strange, your patch couldn't get away the error message.
> 
> OK, then it's not about the race *during* the hd-audio driver
> resuming or such.  I guess it's the other way round: the i915 driver
> notifies it unnecessarily while it's getting off.  The audio part of
> HDMI controller relies on the i915 power state, so it's screwed up.
> 
> Check with drm.debug option to see in which code path it's triggered.
> If it's a call in i915 suspend, the call should be removed not to wake
> up the audio part unnecessarily.

[Zhang, Xiong Y] it is called in intel_audio_codec_disable() from i915 suspend.
---
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index bdb6f226d006..b468fe0e6195 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2352,7 +2352,9 @@ static void intel_pin_eld_notify(void *audio_ptr, int port)
 	struct hda_codec *codec = audio_ptr;
 	int pin_nid = port + 0x04;
 
-	check_presence_and_report(codec, pin_nid);
+	/* don't call notifier during PM; will be checked in resume callback */
+	if (atomic_read(&codec->core.in_pm))
+		check_presence_and_report(codec, pin_nid);
 }
 
 static int patch_generic_hdmi(struct hda_codec *codec)
> 
This could remove the error message. Go through the audio driver, I found in_pm isn't zero only during call codec_suspend() and codec_resume(). atomic_inc_not_zero(&codec->in_pm) in snd_hdac_power_up_pm() isn't inc in_pm since in_pm is zero. 
Is this right ?

thanks
> BTW, I have a patchset to avoid the audio h/w wakeup by a new
> component ops to get ELD and connection states.  It was posted to
> alsa-devel shortly ago just as a reference, but this should work well
> in such a case, too.  The test patches are found in test/hdmi-jack
> branch of my sound git tree.
> 
> 
> Takashi
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-11-26  6:06 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-28 17:02 [PATCH 0/4 v5] i915 to call hda driver on HDMI plug/unplug David Henningsson
2015-08-28 17:02 ` [PATCH 1/4] drm/i915: Add audio pin sense / ELD callback David Henningsson
2015-09-02 11:44   ` Daniel Vetter
2015-08-28 17:02 ` [PATCH 2/4] drm/i915: Call audio pin/ELD notify function David Henningsson
2015-08-28 17:02 ` [PATCH 3/4] ALSA: hda - allow codecs to access the i915 pin/ELD callback David Henningsson
2015-08-28 17:02 ` [PATCH 4/4] ALSA: hda - Wake the codec up on pin/ELD notify events David Henningsson
2015-11-25  9:56   ` Zhang, Xiong Y
2015-11-25 10:07     ` Takashi Iwai
2015-11-25 10:57       ` Zhang, Xiong Y
2015-11-25 11:17         ` Takashi Iwai
2015-11-26  6:06           ` Zhang, Xiong Y [this message]
2015-11-26  6:25             ` Takashi Iwai
2015-11-26  7:57               ` Zhang, Xiong Y
2015-11-26  8:07                 ` [Intel-gfx] " Takashi Iwai
2015-11-26  9:16                   ` Zhang, Xiong Y
2015-11-26  9:24                     ` Takashi Iwai
2015-11-26 15:08                       ` David Henningsson
2015-11-26 15:23                         ` Takashi Iwai
2015-11-26 15:29                           ` David Henningsson
2015-11-26 15:37                             ` Imre Deak
2015-11-26 15:43                             ` Ville Syrjälä
2015-11-26 15:51                               ` Takashi Iwai
2015-11-26 15:58                                 ` Ville Syrjälä
2015-11-26 16:16                                   ` Takashi Iwai
2015-11-27  2:55                                     ` Zhang, Xiong Y
2015-11-27 13:38                                       ` Takashi Iwai
2015-11-27 13:45                                         ` David Henningsson
2015-11-27 13:50                                           ` Takashi Iwai
2015-11-26 15:47                             ` Takashi Iwai
2015-11-26 15:48                           ` Daniel Vetter
2015-08-28 17:14 ` [PATCH 0/4 v5] i915 to call hda driver on HDMI plug/unplug Jani Nikula
2015-09-02 11:45   ` Daniel Vetter
2015-09-02 11:59     ` Takashi Iwai
2015-09-02 12:14       ` Daniel Vetter
2015-09-03  7:52 ` David Henningsson
2015-09-03  8:31   ` Takashi Iwai
2015-09-03  9:53     ` David Henningsson
2015-09-03 10:29     ` Jani Nikula
  -- strict thread matches above, loose matches on Subject: below --
2015-08-19  8:48 [PATCH v4 0/4] " David Henningsson
2015-08-19  8:48 ` [PATCH 4/4] ALSA: hda - Wake the codec up on pin/ELD notify events David Henningsson
2015-08-20  9:28   ` Takashi Iwai
2015-08-20  9:41     ` David Henningsson
2015-08-20  9:46       ` Takashi Iwai
2015-08-28 13:10         ` Jani Nikula
2015-09-02  8:00           ` Daniel Vetter
2015-09-02  8:03             ` Takashi Iwai
2015-09-02  8:32               ` Daniel Vetter
2015-09-02  9:39                 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8082FF9BCB2B054996454E47167FF4EC0B0F2834@SHSMSX104.ccr.corp.intel.com \
    --to=xiong.y.zhang@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=daniel.vetter@intel.com \
    --cc=david.henningsson@canonical.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.