All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Beulich <jbeulich@suse.com>
To: "xen-devel@lists.xenproject.org" <xen-devel@lists.xenproject.org>
Cc: "Andrew Cooper" <andrew.cooper3@citrix.com>,
	"Paul Durrant" <paul@xen.org>,
	"Roger Pau Monné" <roger.pau@citrix.com>
Subject: [PATCH v3 08/23] IOMMU/x86: restrict IO-APIC mappings for PV Dom0
Date: Mon, 10 Jan 2022 17:28:11 +0100	[thread overview]
Message-ID: <813a9e33-943d-a3d2-7aa6-a01b3611c095@suse.com> (raw)
In-Reply-To: <76cb9f26-e316-98a2-b1ba-e51e3d20f335@suse.com>

While already the case for PVH, there's no reason to treat PV
differently here, though of course the addresses get taken from another
source in this case. Except that, to match CPU side mappings, by default
we permit r/o ones. This then also means we now deal consistently with
IO-APICs whose MMIO is or is not covered by E820 reserved regions.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
[integrated] v1: Integrate into series.
[standalone] v2: Keep IOMMU mappings in sync with CPU ones.

--- a/xen/drivers/passthrough/x86/iommu.c
+++ b/xen/drivers/passthrough/x86/iommu.c
@@ -274,12 +274,12 @@ void iommu_identity_map_teardown(struct
     }
 }
 
-static bool __hwdom_init hwdom_iommu_map(const struct domain *d,
-                                         unsigned long pfn,
-                                         unsigned long max_pfn)
+static unsigned int __hwdom_init hwdom_iommu_map(const struct domain *d,
+                                                 unsigned long pfn,
+                                                 unsigned long max_pfn)
 {
     mfn_t mfn = _mfn(pfn);
-    unsigned int i, type;
+    unsigned int i, type, perms = IOMMUF_readable | IOMMUF_writable;
 
     /*
      * Set up 1:1 mapping for dom0. Default to include only conventional RAM
@@ -288,44 +288,60 @@ static bool __hwdom_init hwdom_iommu_map
      * that fall in unusable ranges for PV Dom0.
      */
     if ( (pfn > max_pfn && !mfn_valid(mfn)) || xen_in_range(pfn) )
-        return false;
+        return 0;
 
     switch ( type = page_get_ram_type(mfn) )
     {
     case RAM_TYPE_UNUSABLE:
-        return false;
+        return 0;
 
     case RAM_TYPE_CONVENTIONAL:
         if ( iommu_hwdom_strict )
-            return false;
+            return 0;
         break;
 
     default:
         if ( type & RAM_TYPE_RESERVED )
         {
             if ( !iommu_hwdom_inclusive && !iommu_hwdom_reserved )
-                return false;
+                perms = 0;
         }
-        else if ( is_hvm_domain(d) || !iommu_hwdom_inclusive || pfn > max_pfn )
-            return false;
+        else if ( is_hvm_domain(d) )
+            return 0;
+        else if ( !iommu_hwdom_inclusive || pfn > max_pfn )
+            perms = 0;
     }
 
     /* Check that it doesn't overlap with the Interrupt Address Range. */
     if ( pfn >= 0xfee00 && pfn <= 0xfeeff )
-        return false;
+        return 0;
     /* ... or the IO-APIC */
-    for ( i = 0; has_vioapic(d) && i < d->arch.hvm.nr_vioapics; i++ )
-        if ( pfn == PFN_DOWN(domain_vioapic(d, i)->base_address) )
-            return false;
+    if ( has_vioapic(d) )
+    {
+        for ( i = 0; i < d->arch.hvm.nr_vioapics; i++ )
+            if ( pfn == PFN_DOWN(domain_vioapic(d, i)->base_address) )
+                return 0;
+    }
+    else if ( is_pv_domain(d) )
+    {
+        /*
+         * Be consistent with CPU mappings: Dom0 is permitted to establish r/o
+         * ones there, so it should also have such established for IOMMUs.
+         */
+        for ( i = 0; i < nr_ioapics; i++ )
+            if ( pfn == PFN_DOWN(mp_ioapics[i].mpc_apicaddr) )
+                return rangeset_contains_singleton(mmio_ro_ranges, pfn)
+                       ? IOMMUF_readable : 0;
+    }
     /*
      * ... or the PCIe MCFG regions.
      * TODO: runtime added MMCFG regions are not checked to make sure they
      * don't overlap with already mapped regions, thus preventing trapping.
      */
     if ( has_vpci(d) && vpci_is_mmcfg_address(d, pfn_to_paddr(pfn)) )
-        return false;
+        return 0;
 
-    return true;
+    return perms;
 }
 
 void __hwdom_init arch_iommu_hwdom_init(struct domain *d)
@@ -367,15 +383,19 @@ void __hwdom_init arch_iommu_hwdom_init(
     for ( ; i < top; i++ )
     {
         unsigned long pfn = pdx_to_pfn(i);
+        unsigned int perms = hwdom_iommu_map(d, pfn, max_pfn);
         int rc;
 
-        if ( !hwdom_iommu_map(d, pfn, max_pfn) )
+        if ( !perms )
             rc = 0;
         else if ( paging_mode_translate(d) )
-            rc = set_identity_p2m_entry(d, pfn, p2m_access_rw, 0);
+            rc = set_identity_p2m_entry(d, pfn,
+                                        perms & IOMMUF_writable ? p2m_access_rw
+                                                                : p2m_access_r,
+                                        0);
         else
             rc = iommu_map(d, _dfn(pfn), _mfn(pfn), 1ul << PAGE_ORDER_4K,
-                           IOMMUF_readable | IOMMUF_writable, &flush_flags);
+                           perms, &flush_flags);
 
         if ( rc )
             printk(XENLOG_WARNING "%pd: identity %smapping of %lx failed: %d\n",



  parent reply	other threads:[~2022-01-10 16:28 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-10 16:19 [PATCH v3 00/23] IOMMU: superpage support when not sharing pagetables Jan Beulich
2022-01-10 16:22 ` [PATCH v3 01/23] AMD/IOMMU: have callers specify the target level for page table walks Jan Beulich
2022-01-10 16:22 ` [PATCH v3 02/23] VT-d: " Jan Beulich
2022-01-30  3:17   ` Tian, Kevin
2022-01-31 10:04     ` Jan Beulich
2022-01-10 16:23 ` [PATCH v3 03/23] VT-d: limit page table population in domain_pgd_maddr() Jan Beulich
2022-01-30  3:22   ` Tian, Kevin
2022-01-10 16:25 ` [PATCH v3 04/23] IOMMU: have vendor code announce supported page sizes Jan Beulich
2022-01-10 16:25 ` [PATCH v3 05/23] IOMMU: simplify unmap-on-error in iommu_map() Jan Beulich
2022-01-10 16:27 ` [PATCH v3 06/23] IOMMU: add order parameter to ->{,un}map_page() hooks Jan Beulich
2022-01-10 16:27 ` [PATCH v3 07/23] IOMMU: have iommu_{,un}map() split requests into largest possible chunks Jan Beulich
2022-01-10 16:28 ` Jan Beulich [this message]
2022-01-10 16:28 ` [PATCH v3 09/23] IOMMU/x86: perform PV Dom0 mappings in batches Jan Beulich
2022-01-10 16:29 ` [PATCH v3 10/23] IOMMU/x86: support freeing of pagetables Jan Beulich
2022-01-10 16:29 ` [PATCH v3 11/23] AMD/IOMMU: drop stray TLB flush Jan Beulich
2022-01-10 16:30 ` [PATCH v3 12/23] AMD/IOMMU: walk trees upon page fault Jan Beulich
2022-01-10 16:30 ` [PATCH v3 13/23] AMD/IOMMU: return old PTE from {set,clear}_iommu_pte_present() Jan Beulich
2022-01-10 16:31 ` [PATCH v3 14/23] AMD/IOMMU: allow use of superpage mappings Jan Beulich
2022-01-10 16:32 ` [PATCH v3 15/23] VT-d: " Jan Beulich
2022-01-30  3:26   ` Tian, Kevin
2022-01-10 16:33 ` [PATCH v3 16/23] IOMMU: fold flush-all hook into "flush one" Jan Beulich
2022-01-30  3:38   ` Tian, Kevin
2022-01-10 16:34 ` [PATCH v3 17/23] IOMMU/x86: prefill newly allocate page tables Jan Beulich
2022-02-18  5:01   ` Tian, Kevin
2022-02-18  8:24     ` Jan Beulich
2022-02-18  8:26       ` Tian, Kevin
2022-01-10 16:35 ` [PATCH v3 18/23] x86: introduce helper for recording degree of contiguity in " Jan Beulich
2022-01-10 16:35 ` [PATCH v3 19/23] AMD/IOMMU: free all-empty " Jan Beulich
2022-01-10 16:36 ` [PATCH v3 20/23] VT-d: " Jan Beulich
2022-02-18  5:20   ` Tian, Kevin
2022-02-18  8:31     ` Jan Beulich
2022-03-14  4:01       ` Tian, Kevin
2022-03-14  7:33         ` Jan Beulich
2022-03-17  5:55           ` Tian, Kevin
2022-03-17  8:55             ` Jan Beulich
2022-01-10 16:37 ` [PATCH v3 21/23] AMD/IOMMU: replace all-contiguous page tables by superpage mappings Jan Beulich
2022-01-10 16:38 ` [PATCH v3 22/23] VT-d: " Jan Beulich
2022-02-18  5:22   ` Tian, Kevin
2022-01-10 16:38 ` [PATCH v3 23/23] IOMMU/x86: add perf counters for page table splitting / coalescing Jan Beulich
2022-02-18  5:23   ` Tian, Kevin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=813a9e33-943d-a3d2-7aa6-a01b3611c095@suse.com \
    --to=jbeulich@suse.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=paul@xen.org \
    --cc=roger.pau@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.