From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: will@kernel.org, danielwa@cisco.com, robh@kernel.org,
daniel@gimpelevich.san-francisco.ca.us
Cc: linux-arch@vger.kernel.org, devicetree@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
microblaze <monstr@monstr.eu>,
linux-mips@vger.kernel.org, nios2 <ley.foon.tan@intel.com>,
openrisc@lists.librecores.org, linux-hexagon@vger.kernel.org,
linux-riscv@lists.infradead.org, x86@kernel.org,
linux-xtensa@linux-xtensa.org, linux-sh@vger.kernel.org,
sparclinux@vger.kernel.org
Subject: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
Date: Fri, 26 Mar 2021 13:44:56 +0000 (UTC) [thread overview]
Message-ID: <85b1dc6339351cbc46d179e8fdb9dfc398e58303.1616765870.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1616765869.git.christophe.leroy@csgroup.eu>
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/nios2/Kconfig | 24 +-----------------------
arch/nios2/kernel/setup.c | 13 ++++---------
2 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c24955c81c92..f66c97b15813 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
comment "Boot options"
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- default y
-
-config CMDLINE
- string "Default kernel command string"
- default ""
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
- to set them up in board prom initialization routines.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
config NIOS2_CMDLINE_IGNORE_DTB
bool "Ignore kernel command string from DTB"
- depends on CMDLINE_BOOL
+ depends on CMDLINE != ""
depends on !CMDLINE_FORCE
default y
help
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index d2f21957e99c..42464f457a6d 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/screen_info.h>
+#include <linux/cmdline.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
@@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
@@ -127,14 +128,8 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
early_init_devtree((void *)dtb_passed);
-#ifndef CONFIG_CMDLINE_FORCE
- if (cmdline_passed[0])
- strlcpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
-#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
- else
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif
+ if (cmdline_passed[0] || IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
+ cmdline_build(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
parse_early_param();
}
--
2.25.0
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: will@kernel.org, danielwa@cisco.com, robh@kernel.org,
daniel@gimpelevich.san-francisco.ca.us
Cc: linux-arch@vger.kernel.org, devicetree@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
microblaze <monstr@monstr.eu>,
linux-mips@vger.kernel.org, nios2 <ley.foon.tan@intel.com>,
openrisc@lists.librecores.org, linux-hexagon@vger.kernel.org,
linux-riscv@lists.infradead.org, x86@kernel.org,
linux-xtensa@linux-xtensa.org, linux-sh@vger.kernel.org,
sparclinux@vger.kernel.org
Subject: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
Date: Fri, 26 Mar 2021 13:44:56 +0000 (UTC) [thread overview]
Message-ID: <85b1dc6339351cbc46d179e8fdb9dfc398e58303.1616765870.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1616765869.git.christophe.leroy@csgroup.eu>
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/nios2/Kconfig | 24 +-----------------------
arch/nios2/kernel/setup.c | 13 ++++---------
2 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c24955c81c92..f66c97b15813 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
comment "Boot options"
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- default y
-
-config CMDLINE
- string "Default kernel command string"
- default ""
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
- to set them up in board prom initialization routines.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
config NIOS2_CMDLINE_IGNORE_DTB
bool "Ignore kernel command string from DTB"
- depends on CMDLINE_BOOL
+ depends on CMDLINE != ""
depends on !CMDLINE_FORCE
default y
help
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index d2f21957e99c..42464f457a6d 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/screen_info.h>
+#include <linux/cmdline.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
@@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
@@ -127,14 +128,8 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
early_init_devtree((void *)dtb_passed);
-#ifndef CONFIG_CMDLINE_FORCE
- if (cmdline_passed[0])
- strlcpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
-#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
- else
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif
+ if (cmdline_passed[0] || IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
+ cmdline_build(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
parse_early_param();
}
--
2.25.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: will@kernel.org, danielwa@cisco.com, robh@kernel.org,
daniel@gimpelevich.san-francisco.ca.us
Cc: linux-arch@vger.kernel.org, devicetree@vger.kernel.org,
microblaze <monstr@monstr.eu>,
linux-xtensa@linux-xtensa.org, linux-sh@vger.kernel.org,
linux-hexagon@vger.kernel.org, x86@kernel.org,
linux-kernel@vger.kernel.org, nios2 <ley.foon.tan@intel.com>,
linux-mips@vger.kernel.org, openrisc@lists.librecores.org,
sparclinux@vger.kernel.org, linux-riscv@lists.infradead.org,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
Date: Fri, 26 Mar 2021 13:44:56 +0000 (UTC) [thread overview]
Message-ID: <85b1dc6339351cbc46d179e8fdb9dfc398e58303.1616765870.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1616765869.git.christophe.leroy@csgroup.eu>
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/nios2/Kconfig | 24 +-----------------------
arch/nios2/kernel/setup.c | 13 ++++---------
2 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c24955c81c92..f66c97b15813 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
comment "Boot options"
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- default y
-
-config CMDLINE
- string "Default kernel command string"
- default ""
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
- to set them up in board prom initialization routines.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
config NIOS2_CMDLINE_IGNORE_DTB
bool "Ignore kernel command string from DTB"
- depends on CMDLINE_BOOL
+ depends on CMDLINE != ""
depends on !CMDLINE_FORCE
default y
help
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index d2f21957e99c..42464f457a6d 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/screen_info.h>
+#include <linux/cmdline.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
@@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
@@ -127,14 +128,8 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
early_init_devtree((void *)dtb_passed);
-#ifndef CONFIG_CMDLINE_FORCE
- if (cmdline_passed[0])
- strlcpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
-#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
- else
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif
+ if (cmdline_passed[0] || IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
+ cmdline_build(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
parse_early_param();
}
--
2.25.0
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: will@kernel.org, danielwa@cisco.com, robh@kernel.org,
daniel@gimpelevich.san-francisco.ca.us
Cc: linux-arch@vger.kernel.org, devicetree@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
microblaze <monstr@monstr.eu>,
linux-mips@vger.kernel.org, nios2 <ley.foon.tan@intel.com>,
openrisc@lists.librecores.org, linux-hexagon@vger.kernel.org,
linux-riscv@lists.infradead.org, x86@kernel.org,
linux-xtensa@linux-xtensa.org, linux-sh@vger.kernel.org,
sparclinux@vger.kernel.org
Subject: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
Date: Fri, 26 Mar 2021 13:44:56 +0000 (UTC) [thread overview]
Message-ID: <85b1dc6339351cbc46d179e8fdb9dfc398e58303.1616765870.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1616765869.git.christophe.leroy@csgroup.eu>
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/nios2/Kconfig | 24 +-----------------------
arch/nios2/kernel/setup.c | 13 ++++---------
2 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c24955c81c92..f66c97b15813 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
comment "Boot options"
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- default y
-
-config CMDLINE
- string "Default kernel command string"
- default ""
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
- to set them up in board prom initialization routines.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
config NIOS2_CMDLINE_IGNORE_DTB
bool "Ignore kernel command string from DTB"
- depends on CMDLINE_BOOL
+ depends on CMDLINE != ""
depends on !CMDLINE_FORCE
default y
help
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index d2f21957e99c..42464f457a6d 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/screen_info.h>
+#include <linux/cmdline.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
@@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
@@ -127,14 +128,8 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
early_init_devtree((void *)dtb_passed);
-#ifndef CONFIG_CMDLINE_FORCE
- if (cmdline_passed[0])
- strlcpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
-#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
- else
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif
+ if (cmdline_passed[0] || IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
+ cmdline_build(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
parse_early_param();
}
--
2.25.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: openrisc@lists.librecores.org
Subject: [OpenRISC] [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
Date: Fri, 26 Mar 2021 13:44:56 +0000 (UTC) [thread overview]
Message-ID: <85b1dc6339351cbc46d179e8fdb9dfc398e58303.1616765870.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1616765869.git.christophe.leroy@csgroup.eu>
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/nios2/Kconfig | 24 +-----------------------
arch/nios2/kernel/setup.c | 13 ++++---------
2 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c24955c81c92..f66c97b15813 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
comment "Boot options"
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- default y
-
-config CMDLINE
- string "Default kernel command string"
- default ""
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
- to set them up in board prom initialization routines.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
config NIOS2_CMDLINE_IGNORE_DTB
bool "Ignore kernel command string from DTB"
- depends on CMDLINE_BOOL
+ depends on CMDLINE != ""
depends on !CMDLINE_FORCE
default y
help
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index d2f21957e99c..42464f457a6d 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/screen_info.h>
+#include <linux/cmdline.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
@@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
@@ -127,14 +128,8 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
early_init_devtree((void *)dtb_passed);
-#ifndef CONFIG_CMDLINE_FORCE
- if (cmdline_passed[0])
- strlcpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
-#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
- else
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif
+ if (cmdline_passed[0] || IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
+ cmdline_build(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
parse_early_param();
}
--
2.25.0
next prev parent reply other threads:[~2021-03-26 13:47 UTC|newest]
Thread overview: 206+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 01/17] cmdline: Add generic function to build command line Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 15:42 ` Rob Herring
2021-03-26 15:42 ` [OpenRISC] " Rob Herring
2021-03-26 15:42 ` Rob Herring
2021-03-26 15:42 ` Rob Herring
2021-03-26 15:42 ` Rob Herring
2021-03-26 15:55 ` Christophe Leroy
2021-03-26 15:55 ` [OpenRISC] " Christophe Leroy
2021-03-26 15:55 ` Christophe Leroy
2021-03-26 15:55 ` Christophe Leroy
2021-03-26 15:55 ` Christophe Leroy
2021-04-02 15:23 ` Christophe Leroy
2021-04-02 15:23 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:23 ` Christophe Leroy
2021-04-02 15:23 ` Christophe Leroy
2021-04-02 15:23 ` Christophe Leroy
2021-03-30 17:27 ` Daniel Walker
2021-03-30 17:27 ` [OpenRISC] " Daniel Walker
2021-03-30 17:27 ` Daniel Walker
2021-03-30 17:27 ` Daniel Walker
2021-03-30 17:27 ` Daniel Walker
2021-03-30 18:07 ` H. Nikolaus Schaller
2021-03-30 18:07 ` [OpenRISC] " H. Nikolaus Schaller
2021-03-30 18:07 ` H. Nikolaus Schaller
2021-03-30 18:07 ` H. Nikolaus Schaller
2021-03-30 18:07 ` H. Nikolaus Schaller
2021-03-30 18:23 ` Daniel Walker
2021-03-30 18:23 ` [OpenRISC] " Daniel Walker
2021-03-30 18:23 ` Daniel Walker
2021-03-30 18:23 ` Daniel Walker
2021-03-30 18:23 ` Daniel Walker
2021-04-02 15:33 ` Christophe Leroy
2021-04-02 15:33 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:33 ` Christophe Leroy
2021-04-02 15:33 ` Christophe Leroy
2021-04-02 15:33 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 02/17] drivers: of: use cmdline building function Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 03/17] cmdline: Gives architectures opportunity to use generically defined boot cmdline manipulation Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 04/17] powerpc: Convert to GENERIC_CMDLINE Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 05/17] arm: " Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 15:47 ` Rob Herring
2021-03-26 15:47 ` [OpenRISC] " Rob Herring
2021-03-26 15:47 ` Rob Herring
2021-03-26 15:47 ` Rob Herring
2021-03-26 15:47 ` Rob Herring
2021-03-26 15:49 ` Christophe Leroy
2021-03-26 15:49 ` [OpenRISC] " Christophe Leroy
2021-03-26 15:49 ` Christophe Leroy
2021-03-26 15:49 ` Christophe Leroy
2021-03-26 15:49 ` Christophe Leroy
2021-03-26 18:22 ` Rob Herring
2021-03-26 18:22 ` [OpenRISC] " Rob Herring
2021-03-26 18:22 ` Rob Herring
2021-03-26 18:22 ` Rob Herring
2021-03-26 18:22 ` Rob Herring
2021-04-02 15:19 ` Christophe Leroy
2021-04-02 15:19 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:19 ` Christophe Leroy
2021-04-02 15:19 ` Christophe Leroy
2021-04-02 15:19 ` Christophe Leroy
2021-04-02 15:24 ` Christophe Leroy
2021-04-02 15:24 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:24 ` Christophe Leroy
2021-04-02 15:24 ` Christophe Leroy
2021-04-02 15:24 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 06/17] arm64: " Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 07/17] hexagon: " Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 08/17] microblaze: " Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy [this message]
2021-03-26 13:44 ` [OpenRISC] [PATCH v3 09/17] nios2: " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-29 1:35 ` Tan, Ley Foon
2021-03-29 1:35 ` Tan, Ley Foon
2021-03-29 1:35 ` [OpenRISC] " Tan, Ley Foon
2021-03-29 1:35 ` Tan, Ley Foon
2021-03-29 1:35 ` Tan, Ley Foon
2021-03-29 1:35 ` Tan, Ley Foon
2021-04-02 15:33 ` Christophe Leroy
2021-04-02 15:33 ` Christophe Leroy
2021-04-02 15:33 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:33 ` Christophe Leroy
2021-04-02 15:33 ` Christophe Leroy
2021-04-02 15:33 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 10/17] openrisc: " Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 11/17] riscv: " Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 14:08 ` Andreas Schwab
2021-03-26 14:08 ` Andreas Schwab
2021-03-26 14:08 ` [OpenRISC] " Andreas Schwab
2021-03-26 14:08 ` Andreas Schwab
2021-03-26 14:08 ` Andreas Schwab
2021-03-26 14:08 ` Andreas Schwab
2021-03-26 14:20 ` Christophe Leroy
2021-03-26 14:20 ` [OpenRISC] " Christophe Leroy
2021-03-26 14:20 ` Christophe Leroy
2021-03-26 14:20 ` Christophe Leroy
2021-03-26 14:20 ` Christophe Leroy
2021-03-26 15:26 ` Rob Herring
2021-03-26 15:26 ` [OpenRISC] " Rob Herring
2021-03-26 15:26 ` Rob Herring
2021-03-26 15:26 ` Rob Herring
2021-03-26 15:26 ` Rob Herring
2021-03-30 0:52 ` Nick Kossifidis
2021-03-30 0:52 ` Nick Kossifidis
2021-03-30 0:52 ` [OpenRISC] " Nick Kossifidis
2021-03-30 0:52 ` Nick Kossifidis
2021-03-30 0:52 ` Nick Kossifidis
2021-03-30 0:52 ` Nick Kossifidis
2021-04-02 15:21 ` Christophe Leroy
2021-04-02 15:21 ` Christophe Leroy
2021-04-02 15:21 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:21 ` Christophe Leroy
2021-04-02 15:21 ` Christophe Leroy
2021-04-02 15:21 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 12/17] sh: " Christophe Leroy
2021-03-26 13:44 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` Christophe Leroy
2021-04-02 15:36 ` Christophe Leroy
2021-04-02 15:36 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:36 ` Christophe Leroy
2021-04-02 15:36 ` Christophe Leroy
2021-04-02 15:36 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 13/17] sparc: " Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 14/17] xtensa: " Christophe Leroy
2021-03-26 13:45 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 15/17] x86: " Christophe Leroy
2021-03-26 13:45 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 16/17] mips: " Christophe Leroy
2021-03-26 13:45 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 17/17] cmdline: Remove CONFIG_CMDLINE_EXTEND Christophe Leroy
2021-03-26 13:45 ` [OpenRISC] " Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` Christophe Leroy
2021-03-26 15:04 ` [PATCH v3 00/17] Implement GENERIC_CMDLINE Rob Herring
2021-03-26 15:04 ` [OpenRISC] " Rob Herring
2021-03-26 15:04 ` Rob Herring
2021-03-26 15:04 ` Rob Herring
2021-03-26 15:04 ` Rob Herring
2021-04-02 15:20 ` Christophe Leroy
2021-04-02 15:20 ` [OpenRISC] " Christophe Leroy
2021-04-02 15:20 ` Christophe Leroy
2021-04-02 15:20 ` Christophe Leroy
2021-04-02 15:20 ` Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=85b1dc6339351cbc46d179e8fdb9dfc398e58303.1616765870.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=daniel@gimpelevich.san-francisco.ca.us \
--cc=danielwa@cisco.com \
--cc=devicetree@vger.kernel.org \
--cc=ley.foon.tan@intel.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hexagon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-xtensa@linux-xtensa.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=monstr@monstr.eu \
--cc=openrisc@lists.librecores.org \
--cc=robh@kernel.org \
--cc=sparclinux@vger.kernel.org \
--cc=will@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.