From: Jani Nikula <jani.nikula@linux.intel.com> To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>, intel-gfx@lists.freedesktop.org Cc: airlied@linux.ie, Daniel Vetter <daniel.vetter@ffwll.ch>, dri-devel@lists.freedesktop.org, vandita.kulkarni@intel.com, uma.shankar@intel.com, swati2.sharma@intel.com, Thomas Zimmermann <tzimmermann@suse.de>, Rodrigo Vivi <rodrigo.vivi@intel.com> Subject: Re: [PATCH v7 00/15] Add support for DP-HDMI2.1 PCON Date: Tue, 22 Dec 2020 18:28:44 +0200 [thread overview] Message-ID: <87v9ctoldv.fsf@intel.com> (raw) In-Reply-To: <20201218103723.30844-1-ankit.k.nautiyal@intel.com> On Fri, 18 Dec 2020, Ankit Nautiyal <ankit.k.nautiyal@intel.com> wrote: > This patch series attempts to add support for a DP-HDMI2.1 Protocol > Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata > E5 to DisplayPort_v2.0: > https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299 > The details are mentioned in: > VESA DP-to-HDMI PCON Specification Standalone Document > https://groups.vesa.org/wg/DP/document/15651 Thanks for the patches and review. I've pushed the series to a new topic branch topic/dp-hdmi-2.1-pcon as discussed with Maarten and Daniel a while back. I've used 'git merge-base drm-misc/drm-misc-next drm-intel/drm-intel-next' as the base to allow merging to both. I'll send pull requests soon, and wait for the drm-misc-next merge before merging to i915. BR, Jani. > > This series starts with adding support for FRL (Fixed Rate Link) > Training between the PCON and HDMI2.1 sink. > As per HDMI2.1 specification, a new data-channel or lane is added in > FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher > bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4 > lanes). > > With these patches, the HDMI2.1 PCON can be configured to achieve FRL > training based on the maximum FRL rate supported by the panel, source > and the PCON. > The approach is to add the support for FRL training between PCON and > HDMI2.1 sink and gradually add other blocks for supporting higher > resolutions and other HDMI2.1 features, that can be supported by pcon > for the sources that do not natively support HDMI2.1. > > This is done before the DP Link training between the source and PCON > is started. In case of FRL training is not achieved, the PCON will > work in the regular TMDS mode, without HDMI2.1 feature support. > Any interruption in FRL training between the PCON and HDMI2.1 sink is > notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD > registers are read and FRL training is re-attempted. > > Currently, we have tested the FRL training and are able to enable 4K > display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting > panel. > > v2: Addressed review comments and re-organized patches as suggested in > comments on RFC patches. > > v3: Addressed review comments on previous version. > > v4: Added support for RGB->YCBCR conversion through PCON > > v5: Addressed review comments on previous version. > > v6: Fix typo in one of the patch. > > v7: Rebased on latest drm-tip and addressed the review comments. > > Ankit Nautiyal (11): > drm/edid: Parse DSC1.2 cap fields from HFVSDB block > drm/dp_helper: Add Helpers for FRL Link Training support for > DP-HDMI2.1 PCON > drm/dp_helper: Add support for Configuring DSC for HDMI2.1 Pcon > drm/dp_helper: Add helpers to configure PCONs RGB-YCbCr Conversion > drm/i915: Capture max frl rate for PCON in dfp cap structure > drm/i915: Add support for starting FRL training for HDMI2.1 via PCON > drm/i915: Check for FRL training before DP Link training > drm/i915: Read DSC capabilities of the HDMI2.1 PCON encoder > drm/i915: Add helper functions for calculating DSC parameters for > HDMI2.1 > drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding > drm/i915/display: Let PCON convert from RGB to YCbCr if it can > > Swati Sharma (4): > drm/edid: Add additional HFVSDB fields for HDMI2.1 > drm/edid: Parse MAX_FRL field from HFVSDB block > drm/dp_helper: Add support for link failure detection > drm/i915: Add support for enabling link status and recovery > > drivers/gpu/drm/drm_dp_helper.c | 566 ++++++++++++++++++ > drivers/gpu/drm/drm_edid.c | 103 ++++ > drivers/gpu/drm/i915/display/intel_ddi.c | 6 +- > .../drm/i915/display/intel_display_types.h | 10 + > drivers/gpu/drm/i915/display/intel_dp.c | 442 +++++++++++++- > drivers/gpu/drm/i915/display/intel_dp.h | 7 +- > drivers/gpu/drm/i915/display/intel_hdmi.c | 233 +++++++ > drivers/gpu/drm/i915/display/intel_hdmi.h | 7 + > include/drm/drm_connector.h | 49 ++ > include/drm/drm_dp_helper.h | 218 +++++++ > include/drm/drm_edid.h | 30 + > 11 files changed, 1652 insertions(+), 19 deletions(-) -- Jani Nikula, Intel Open Source Graphics Center _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Jani Nikula <jani.nikula@linux.intel.com> To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>, intel-gfx@lists.freedesktop.org Cc: Maxime Ripard <mripard@kernel.org>, airlied@linux.ie, Daniel Vetter <daniel.vetter@ffwll.ch>, dri-devel@lists.freedesktop.org, Thomas Zimmermann <tzimmermann@suse.de> Subject: Re: [Intel-gfx] [PATCH v7 00/15] Add support for DP-HDMI2.1 PCON Date: Tue, 22 Dec 2020 18:28:44 +0200 [thread overview] Message-ID: <87v9ctoldv.fsf@intel.com> (raw) In-Reply-To: <20201218103723.30844-1-ankit.k.nautiyal@intel.com> On Fri, 18 Dec 2020, Ankit Nautiyal <ankit.k.nautiyal@intel.com> wrote: > This patch series attempts to add support for a DP-HDMI2.1 Protocol > Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata > E5 to DisplayPort_v2.0: > https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299 > The details are mentioned in: > VESA DP-to-HDMI PCON Specification Standalone Document > https://groups.vesa.org/wg/DP/document/15651 Thanks for the patches and review. I've pushed the series to a new topic branch topic/dp-hdmi-2.1-pcon as discussed with Maarten and Daniel a while back. I've used 'git merge-base drm-misc/drm-misc-next drm-intel/drm-intel-next' as the base to allow merging to both. I'll send pull requests soon, and wait for the drm-misc-next merge before merging to i915. BR, Jani. > > This series starts with adding support for FRL (Fixed Rate Link) > Training between the PCON and HDMI2.1 sink. > As per HDMI2.1 specification, a new data-channel or lane is added in > FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher > bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4 > lanes). > > With these patches, the HDMI2.1 PCON can be configured to achieve FRL > training based on the maximum FRL rate supported by the panel, source > and the PCON. > The approach is to add the support for FRL training between PCON and > HDMI2.1 sink and gradually add other blocks for supporting higher > resolutions and other HDMI2.1 features, that can be supported by pcon > for the sources that do not natively support HDMI2.1. > > This is done before the DP Link training between the source and PCON > is started. In case of FRL training is not achieved, the PCON will > work in the regular TMDS mode, without HDMI2.1 feature support. > Any interruption in FRL training between the PCON and HDMI2.1 sink is > notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD > registers are read and FRL training is re-attempted. > > Currently, we have tested the FRL training and are able to enable 4K > display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting > panel. > > v2: Addressed review comments and re-organized patches as suggested in > comments on RFC patches. > > v3: Addressed review comments on previous version. > > v4: Added support for RGB->YCBCR conversion through PCON > > v5: Addressed review comments on previous version. > > v6: Fix typo in one of the patch. > > v7: Rebased on latest drm-tip and addressed the review comments. > > Ankit Nautiyal (11): > drm/edid: Parse DSC1.2 cap fields from HFVSDB block > drm/dp_helper: Add Helpers for FRL Link Training support for > DP-HDMI2.1 PCON > drm/dp_helper: Add support for Configuring DSC for HDMI2.1 Pcon > drm/dp_helper: Add helpers to configure PCONs RGB-YCbCr Conversion > drm/i915: Capture max frl rate for PCON in dfp cap structure > drm/i915: Add support for starting FRL training for HDMI2.1 via PCON > drm/i915: Check for FRL training before DP Link training > drm/i915: Read DSC capabilities of the HDMI2.1 PCON encoder > drm/i915: Add helper functions for calculating DSC parameters for > HDMI2.1 > drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding > drm/i915/display: Let PCON convert from RGB to YCbCr if it can > > Swati Sharma (4): > drm/edid: Add additional HFVSDB fields for HDMI2.1 > drm/edid: Parse MAX_FRL field from HFVSDB block > drm/dp_helper: Add support for link failure detection > drm/i915: Add support for enabling link status and recovery > > drivers/gpu/drm/drm_dp_helper.c | 566 ++++++++++++++++++ > drivers/gpu/drm/drm_edid.c | 103 ++++ > drivers/gpu/drm/i915/display/intel_ddi.c | 6 +- > .../drm/i915/display/intel_display_types.h | 10 + > drivers/gpu/drm/i915/display/intel_dp.c | 442 +++++++++++++- > drivers/gpu/drm/i915/display/intel_dp.h | 7 +- > drivers/gpu/drm/i915/display/intel_hdmi.c | 233 +++++++ > drivers/gpu/drm/i915/display/intel_hdmi.h | 7 + > include/drm/drm_connector.h | 49 ++ > include/drm/drm_dp_helper.h | 218 +++++++ > include/drm/drm_edid.h | 30 + > 11 files changed, 1652 insertions(+), 19 deletions(-) -- Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-12-22 16:28 UTC|newest] Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-18 10:37 [PATCH v7 00/15] Add support for DP-HDMI2.1 PCON Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 01/15] drm/edid: Add additional HFVSDB fields for HDMI2.1 Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 02/15] drm/edid: Parse MAX_FRL field from HFVSDB block Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 03/15] drm/edid: Parse DSC1.2 cap fields " Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 04/15] drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCON Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 11:05 ` Shankar, Uma 2020-12-18 11:05 ` [Intel-gfx] " Shankar, Uma 2020-12-18 10:37 ` [PATCH v7 05/15] drm/dp_helper: Add support for link failure detection Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 06/15] drm/dp_helper: Add support for Configuring DSC for HDMI2.1 Pcon Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 07/15] drm/dp_helper: Add helpers to configure PCONs RGB-YCbCr Conversion Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 08/15] drm/i915: Capture max frl rate for PCON in dfp cap structure Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 09/15] drm/i915: Add support for starting FRL training for HDMI2.1 via PCON Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2021-02-01 20:38 ` Ville Syrjälä 2021-02-01 20:38 ` [Intel-gfx] " Ville Syrjälä 2021-02-02 6:39 ` Nautiyal, Ankit K 2021-02-02 6:39 ` [Intel-gfx] " Nautiyal, Ankit K 2021-02-02 6:47 ` Ville Syrjälä 2021-02-02 6:47 ` [Intel-gfx] " Ville Syrjälä 2021-02-02 8:11 ` Nautiyal, Ankit K 2021-02-02 8:11 ` [Intel-gfx] " Nautiyal, Ankit K 2020-12-18 10:37 ` [PATCH v7 10/15] drm/i915: Check for FRL training before DP Link training Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 11/15] drm/i915: Add support for enabling link status and recovery Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 11:06 ` Shankar, Uma 2020-12-18 11:06 ` [Intel-gfx] " Shankar, Uma 2020-12-18 10:37 ` [PATCH v7 12/15] drm/i915: Read DSC capabilities of the HDMI2.1 PCON encoder Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 13/15] drm/i915: Add helper functions for calculating DSC parameters for HDMI2.1 Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 14/15] drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 10:37 ` [PATCH v7 15/15] drm/i915/display: Let PCON convert from RGB to YCbCr if it can Ankit Nautiyal 2020-12-18 10:37 ` [Intel-gfx] " Ankit Nautiyal 2020-12-18 11:11 ` Shankar, Uma 2020-12-18 11:11 ` [Intel-gfx] " Shankar, Uma 2020-12-18 12:52 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Add support for DP-HDMI2.1 PCON (rev9) Patchwork 2020-12-22 16:43 ` Jani Nikula 2020-12-23 5:56 ` Nautiyal, Ankit K 2020-12-23 6:54 ` Shankar, Uma 2020-12-23 7:08 ` Sharma, Swati2 2020-12-23 9:18 ` Jani Nikula 2020-12-18 12:55 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork 2020-12-18 13:21 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork 2020-12-18 15:37 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork 2020-12-22 16:28 ` Jani Nikula [this message] 2020-12-22 16:28 ` [Intel-gfx] [PATCH v7 00/15] Add support for DP-HDMI2.1 PCON Jani Nikula
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=87v9ctoldv.fsf@intel.com \ --to=jani.nikula@linux.intel.com \ --cc=airlied@linux.ie \ --cc=ankit.k.nautiyal@intel.com \ --cc=daniel.vetter@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=intel-gfx@lists.freedesktop.org \ --cc=rodrigo.vivi@intel.com \ --cc=swati2.sharma@intel.com \ --cc=tzimmermann@suse.de \ --cc=uma.shankar@intel.com \ --cc=vandita.kulkarni@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.