From: santosh.shilimkar@oracle.com
To: Grygorii Strashko <grygorii.strashko@ti.com>,
Dave Gerlach <d-gerlach@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Lokesh Vutla <lokeshvutla@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 0/5] soc: ti: add k3 platforms chipid module driver
Date: Fri, 1 May 2020 14:25:17 -0700 [thread overview]
Message-ID: <8fa7126c-3a26-442c-b239-9969d65d4a19@oracle.com> (raw)
In-Reply-To: <23b3b069-426e-a113-a8bf-816b30f10490@ti.com>
On 5/1/20 1:55 PM, Grygorii Strashko wrote:
> Hi Santosh, Tero
>
> On 23/04/2020 21:05, Grygorii Strashko wrote:
>> Hi All,
>>
>> This series introduces TI K3 Multicore SoC platforms chipid module driver
>> which provides identification support of the TI K3 SoCs (family,
>> revision)
>> and register this information with the SoC bus. It is available under
>> /sys/devices/soc0/ for user space, and can be checked, where needed,
>> in Kernel using soc_device_match().
>> It is also required for introducing support for new revisions of
>> K3 AM65x/J721E SoCs.
>>
>> Example J721E:
>> # cat /sys/devices/soc0/{machine,family,revision}
>> Texas Instruments K3 J721E SoC
>> J721E
>> SR1.0
>>
>> Example AM65x:
>> # cat /sys/devices/soc0/{machine,family,revision}
>> Texas Instruments AM654 Base Board
>> AM65X
>> SR1.0
>>
>> Grygorii Strashko (5):
>> dt-bindings: soc: ti: add binding for k3 platforms chipid module
>> soc: ti: add k3 platforms chipid module driver
>> arm64: arch_k3: enable chipid driver
>> arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node
>> arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module
>> node
>>
>> .../bindings/soc/ti/k3-socinfo.yaml | 40 ++++++
>> arch/arm64/Kconfig.platforms | 1 +
>> arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 5 +
>> .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 5 +
>> drivers/soc/ti/Kconfig | 10 ++
>> drivers/soc/ti/Makefile | 1 +
>> drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++
>> 7 files changed, 197 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
>> create mode 100644 drivers/soc/ti/k3-socinfo.c
>>
>
> Any more comments? I'm going resend it.
>
If you have acks from DT maintainers, then I suggest you to split this
series and post platform and drivers patches separately.
Regards,
Santosh
WARNING: multiple messages have this Message-ID (diff)
From: santosh.shilimkar@oracle.com
To: Grygorii Strashko <grygorii.strashko@ti.com>,
Dave Gerlach <d-gerlach@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Lokesh Vutla <lokeshvutla@ti.com>
Cc: devicetree@vger.kernel.org, Sekhar Nori <nsekhar@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/5] soc: ti: add k3 platforms chipid module driver
Date: Fri, 1 May 2020 14:25:17 -0700 [thread overview]
Message-ID: <8fa7126c-3a26-442c-b239-9969d65d4a19@oracle.com> (raw)
In-Reply-To: <23b3b069-426e-a113-a8bf-816b30f10490@ti.com>
On 5/1/20 1:55 PM, Grygorii Strashko wrote:
> Hi Santosh, Tero
>
> On 23/04/2020 21:05, Grygorii Strashko wrote:
>> Hi All,
>>
>> This series introduces TI K3 Multicore SoC platforms chipid module driver
>> which provides identification support of the TI K3 SoCs (family,
>> revision)
>> and register this information with the SoC bus. It is available under
>> /sys/devices/soc0/ for user space, and can be checked, where needed,
>> in Kernel using soc_device_match().
>> It is also required for introducing support for new revisions of
>> K3 AM65x/J721E SoCs.
>>
>> Example J721E:
>> # cat /sys/devices/soc0/{machine,family,revision}
>> Texas Instruments K3 J721E SoC
>> J721E
>> SR1.0
>>
>> Example AM65x:
>> # cat /sys/devices/soc0/{machine,family,revision}
>> Texas Instruments AM654 Base Board
>> AM65X
>> SR1.0
>>
>> Grygorii Strashko (5):
>> dt-bindings: soc: ti: add binding for k3 platforms chipid module
>> soc: ti: add k3 platforms chipid module driver
>> arm64: arch_k3: enable chipid driver
>> arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node
>> arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module
>> node
>>
>> .../bindings/soc/ti/k3-socinfo.yaml | 40 ++++++
>> arch/arm64/Kconfig.platforms | 1 +
>> arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 5 +
>> .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 5 +
>> drivers/soc/ti/Kconfig | 10 ++
>> drivers/soc/ti/Makefile | 1 +
>> drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++
>> 7 files changed, 197 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
>> create mode 100644 drivers/soc/ti/k3-socinfo.c
>>
>
> Any more comments? I'm going resend it.
>
If you have acks from DT maintainers, then I suggest you to split this
series and post platform and drivers patches separately.
Regards,
Santosh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-01 21:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-23 18:05 [PATCH 0/5] soc: ti: add k3 platforms chipid module driver Grygorii Strashko
2020-04-23 18:05 ` Grygorii Strashko
2020-04-23 18:05 ` [PATCH 1/5] dt-bindings: soc: ti: add binding for k3 platforms chipid module Grygorii Strashko
2020-04-23 18:05 ` Grygorii Strashko
2020-05-04 9:38 ` Grygorii Strashko
2020-05-04 9:38 ` Grygorii Strashko
2020-04-23 18:05 ` [PATCH 2/5] soc: ti: add k3 platforms chipid module driver Grygorii Strashko
2020-04-23 18:05 ` Grygorii Strashko
2020-04-24 4:36 ` Lokesh Vutla
2020-04-24 4:36 ` Lokesh Vutla
2020-04-23 18:05 ` [PATCH 3/5] arm64: arch_k3: enable chipid driver Grygorii Strashko
2020-04-23 18:05 ` Grygorii Strashko
2020-04-23 18:05 ` [PATCH 4/5] arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node Grygorii Strashko
2020-04-23 18:05 ` Grygorii Strashko
2020-04-23 18:05 ` [PATCH 5/5] arm64: dts: ti: k3-j721e-mcu-wakeup: " Grygorii Strashko
2020-04-23 18:05 ` Grygorii Strashko
2020-05-01 20:55 ` [PATCH 0/5] soc: ti: add k3 platforms chipid module driver Grygorii Strashko
2020-05-01 20:55 ` Grygorii Strashko
2020-05-01 21:25 ` santosh.shilimkar [this message]
2020-05-01 21:25 ` santosh.shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8fa7126c-3a26-442c-b239-9969d65d4a19@oracle.com \
--to=santosh.shilimkar@oracle.com \
--cc=catalin.marinas@arm.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.