From: Baruch Siach <baruch@tkos.co.il>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>
Cc: Baruch Siach <baruch@tkos.co.il>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Balaji Prakash J <bjagadee@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Robert Marko <robert.marko@sartura.hr>,
Kathiravan T <kathirav@codeaurora.org>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/4] arm64: dts: ipq6018: add pwm node
Date: Tue, 13 Jul 2021 14:35:45 +0300 [thread overview]
Message-ID: <998a94922be5d0ec810bae6f4775ac9de79ff87b.1626176145.git.baruch@tkos.co.il> (raw)
In-Reply-To: <f79128fa287e37ee59cb03ae04b319ecb3d68c29.1626176145.git.baruch@tkos.co.il>
Describe the PWM block on IPQ6018.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs
v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 72ac36c1be57..06b6676097e8 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -355,6 +355,15 @@ i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */
status = "disabled";
};
+ pwm: pwm {
+ #pwm-cells = <2>;
+ compatible = "qcom,ipq6018-pwm";
+ qcom,pwm-regs = <&tcsr_q6 0xa010>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x07984000 0x0 0x1a000>;
--
2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Baruch Siach <baruch@tkos.co.il>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>
Cc: Baruch Siach <baruch@tkos.co.il>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Balaji Prakash J <bjagadee@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Robert Marko <robert.marko@sartura.hr>,
Kathiravan T <kathirav@codeaurora.org>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/4] arm64: dts: ipq6018: add pwm node
Date: Tue, 13 Jul 2021 14:35:45 +0300 [thread overview]
Message-ID: <998a94922be5d0ec810bae6f4775ac9de79ff87b.1626176145.git.baruch@tkos.co.il> (raw)
In-Reply-To: <f79128fa287e37ee59cb03ae04b319ecb3d68c29.1626176145.git.baruch@tkos.co.il>
Describe the PWM block on IPQ6018.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs
v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 72ac36c1be57..06b6676097e8 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -355,6 +355,15 @@ i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */
status = "disabled";
};
+ pwm: pwm {
+ #pwm-cells = <2>;
+ compatible = "qcom,ipq6018-pwm";
+ qcom,pwm-regs = <&tcsr_q6 0xa010>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x07984000 0x0 0x1a000>;
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-13 11:35 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-13 11:35 [PATCH v5 1/4] arm64: dts: ipq6018: correct TCSR block area Baruch Siach
2021-07-13 11:35 ` Baruch Siach
2021-07-13 11:35 ` [PATCH v5 2/4] pwm: driver for qualcomm ipq6018 pwm block Baruch Siach
2021-07-13 11:35 ` Baruch Siach
2021-07-13 18:07 ` kernel test robot
2021-07-13 21:26 ` kernel test robot
2021-07-14 20:18 ` Uwe Kleine-König
2021-07-14 20:18 ` Uwe Kleine-König
2021-07-16 5:51 ` Baruch Siach
2021-07-16 5:51 ` Baruch Siach
2021-07-16 7:04 ` Uwe Kleine-König
2021-07-16 7:04 ` Uwe Kleine-König
2021-07-22 10:08 ` Baruch Siach
2021-07-22 10:08 ` Baruch Siach
2021-07-13 11:35 ` [PATCH v5 3/4] dt-bindings: pwm: add IPQ6018 binding Baruch Siach
2021-07-13 11:35 ` Baruch Siach
2021-07-14 2:40 ` Rob Herring
2021-07-14 2:40 ` Rob Herring
2021-07-13 11:35 ` Baruch Siach [this message]
2021-07-13 11:35 ` [PATCH v5 4/4] arm64: dts: ipq6018: add pwm node Baruch Siach
2021-07-14 16:13 ` [PATCH v5 1/4] arm64: dts: ipq6018: correct TCSR block area Kathiravan T
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=998a94922be5d0ec810bae6f4775ac9de79ff87b.1626176145.git.baruch@tkos.co.il \
--to=baruch@tkos.co.il \
--cc=agross@kernel.org \
--cc=bjagadee@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kathirav@codeaurora.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robert.marko@sartura.hr \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.