All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aisheng Dong <aisheng.dong@nxp.com>
To: Aisheng Dong <aisheng.dong@nxp.com>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>
Cc: "linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
	"sboyd@kernel.org" <sboyd@kernel.org>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>
Subject: RE: [PATCH RESEND v3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Tue, 7 Apr 2020 02:25:17 +0000	[thread overview]
Message-ID: <AM6PR04MB4966440BB0F9D56977A9699180C30@AM6PR04MB4966.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1573994635-14479-1-git-send-email-aisheng.dong@nxp.com>

Hi Shawn,

Do you have any comments about this patchset?
BTW, it depends on the latest clock patchset which is pending for quite a long time.

Regards
Aisheng

> From: Dong Aisheng <aisheng.dong@nxp.com>
> Sent: Sunday, November 17, 2019 8:44 PM
> Subject: [PATCH RESEND v3 00/15] arm64: dts: imx8: architecture improvement
> and adding imx8qm support
> 
> IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number
> of SS (Subsystems), those SS may be shared between different SoCs while most
> of them can be reused like Devices Resources, Clocks, Power domains and etc.
> 
> This patch series aims to improve the MX8 architecture to comply with the HW
> design to save a lot of duplicated codes and benefits us a better maintainability
> and scalability in the future.
> 
> This patch series depends on another clk new binding series:
> 
> NOTE: for the missing undocumented compatible strings for the new SoC
> IMX8QM in this patch series. It will be sent in another patch series later.
> 
> ChangeLog:
> v2->v3:
>  * use clock-indices property instead of bit-offset property suggested by Shawn
> Guo
>  * rebase to latest shawn/for-next
> v1->v2:
>  * change to the new two cells scu clock binding, so original adding scu clocks
>    patches were removed.
>  * Move scu pd node above clk node
> 
> Dong Aisheng (15):
>   arm64: dts: imx8qxp: add fallback compatible string for scu pd
>   arm64: dts: imx8qxp: move scu pd node before scu clock node
>   arm64: dts: imx8qxp: orginize dts in subsystems
>   arm64: dts: imx8: add lsio lpcg clocks
>   arm64: dts: imx8: add conn lpcg clocks
>   arm64: dts: imx8: add adma lpcg clocks
>   arm64: dts: imx8: switch to two cell scu clock binding
>   arm64: dts: imx8: switch to new lpcg clock binding
>   arm64: dts: imx8qm: add lsio ss support
>   arm64: dts: imx8qm: add conn ss support
>   arm64: dts: imx8: split adma ss into dma and audio ss
>   arm64: dts: imx8qm: add dma ss support
>   arm64: dts: imx: add imx8qm common dts file
>   arm64: dts: imx: add imx8qm mek support
>   arm64: defconfig: add imx8qm mek support
> 
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8-ss-adma.dtsi      |   8 +
>  .../boot/dts/freescale/imx8-ss-audio.dtsi     |  68 +++
>  .../boot/dts/freescale/imx8-ss-conn.dtsi      | 187 ++++++++
>  .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  19
> +  .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 210 +++++++++
>  .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 311 +++++++++++++
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 144 ++++++
>  .../boot/dts/freescale/imx8qm-ss-conn.dtsi    |  21 +
>  .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |  51 +++
>  .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    |  61 +++
>  arch/arm64/boot/dts/freescale/imx8qm.dtsi     | 180 ++++++++
>  .../boot/dts/freescale/imx8qxp-ai_ml.dts      |  20 +-
>  .../freescale/imx8qxp-colibri-eval-v3.dtsi    |   8 +-
>  .../boot/dts/freescale/imx8qxp-colibri.dtsi   |  12 +-
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  12 +-
>  .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  37 ++
>  .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  21 +
>  .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  61 +++
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 425 ++----------------
>  arch/arm64/configs/defconfig                  |   1 +
>  21 files changed, 1432 insertions(+), 426 deletions(-)  create mode 100644
> arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
> 
> --
> 2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: Aisheng Dong <aisheng.dong@nxp.com>
To: Aisheng Dong <aisheng.dong@nxp.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Cc: "sboyd@kernel.org" <sboyd@kernel.org>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>
Subject: RE: [PATCH RESEND v3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Tue, 7 Apr 2020 02:25:17 +0000	[thread overview]
Message-ID: <AM6PR04MB4966440BB0F9D56977A9699180C30@AM6PR04MB4966.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1573994635-14479-1-git-send-email-aisheng.dong@nxp.com>

Hi Shawn,

Do you have any comments about this patchset?
BTW, it depends on the latest clock patchset which is pending for quite a long time.

Regards
Aisheng

> From: Dong Aisheng <aisheng.dong@nxp.com>
> Sent: Sunday, November 17, 2019 8:44 PM
> Subject: [PATCH RESEND v3 00/15] arm64: dts: imx8: architecture improvement
> and adding imx8qm support
> 
> IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number
> of SS (Subsystems), those SS may be shared between different SoCs while most
> of them can be reused like Devices Resources, Clocks, Power domains and etc.
> 
> This patch series aims to improve the MX8 architecture to comply with the HW
> design to save a lot of duplicated codes and benefits us a better maintainability
> and scalability in the future.
> 
> This patch series depends on another clk new binding series:
> 
> NOTE: for the missing undocumented compatible strings for the new SoC
> IMX8QM in this patch series. It will be sent in another patch series later.
> 
> ChangeLog:
> v2->v3:
>  * use clock-indices property instead of bit-offset property suggested by Shawn
> Guo
>  * rebase to latest shawn/for-next
> v1->v2:
>  * change to the new two cells scu clock binding, so original adding scu clocks
>    patches were removed.
>  * Move scu pd node above clk node
> 
> Dong Aisheng (15):
>   arm64: dts: imx8qxp: add fallback compatible string for scu pd
>   arm64: dts: imx8qxp: move scu pd node before scu clock node
>   arm64: dts: imx8qxp: orginize dts in subsystems
>   arm64: dts: imx8: add lsio lpcg clocks
>   arm64: dts: imx8: add conn lpcg clocks
>   arm64: dts: imx8: add adma lpcg clocks
>   arm64: dts: imx8: switch to two cell scu clock binding
>   arm64: dts: imx8: switch to new lpcg clock binding
>   arm64: dts: imx8qm: add lsio ss support
>   arm64: dts: imx8qm: add conn ss support
>   arm64: dts: imx8: split adma ss into dma and audio ss
>   arm64: dts: imx8qm: add dma ss support
>   arm64: dts: imx: add imx8qm common dts file
>   arm64: dts: imx: add imx8qm mek support
>   arm64: defconfig: add imx8qm mek support
> 
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8-ss-adma.dtsi      |   8 +
>  .../boot/dts/freescale/imx8-ss-audio.dtsi     |  68 +++
>  .../boot/dts/freescale/imx8-ss-conn.dtsi      | 187 ++++++++
>  .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  19
> +  .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 210 +++++++++
>  .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 311 +++++++++++++
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 144 ++++++
>  .../boot/dts/freescale/imx8qm-ss-conn.dtsi    |  21 +
>  .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |  51 +++
>  .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    |  61 +++
>  arch/arm64/boot/dts/freescale/imx8qm.dtsi     | 180 ++++++++
>  .../boot/dts/freescale/imx8qxp-ai_ml.dts      |  20 +-
>  .../freescale/imx8qxp-colibri-eval-v3.dtsi    |   8 +-
>  .../boot/dts/freescale/imx8qxp-colibri.dtsi   |  12 +-
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  12 +-
>  .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  37 ++
>  .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  21 +
>  .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  61 +++
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 425 ++----------------
>  arch/arm64/configs/defconfig                  |   1 +
>  21 files changed, 1432 insertions(+), 426 deletions(-)  create mode 100644
> arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
> 
> --
> 2.23.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-04-07  2:25 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-17 12:43 [PATCH RESEND v3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng
2019-11-17 12:43 ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 01/15] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 02/15] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 03/15] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 04/15] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 05/15] arm64: dts: imx8: add conn " Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 06/15] arm64: dts: imx8: add adma " Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 07/15] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 08/15] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 09/15] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 10/15] arm64: dts: imx8qm: add conn " Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 11/15] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 12/15] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 13/15] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2019-11-17 12:43 ` [PATCH RESEND v3 14/15] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2020-02-25  9:07   ` Oliver Graute
2020-02-25  9:07     ` Oliver Graute
2019-11-17 12:43 ` [PATCH RESEND v3 15/15] arm64: defconfig: " Dong Aisheng
2019-11-17 12:43   ` Dong Aisheng
2020-04-07  2:25 ` Aisheng Dong [this message]
2020-04-07  2:25   ` [PATCH RESEND v3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Aisheng Dong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM6PR04MB4966440BB0F9D56977A9699180C30@AM6PR04MB4966.eurprd04.prod.outlook.com \
    --to=aisheng.dong@nxp.com \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.