From: Alexandre TORGUE <alexandre.torgue@st.com> To: dillon min <dillon.minfei@gmail.com>, Rob Herring <robh+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, "linux-stm32@st-md-mailman.stormreply.com" <linux-stm32@st-md-mailman.stormreply.com>, Linux ARM <linux-arm-kernel@lists.infradead.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, "linux@armlinux.org.uk" <linux@armlinux.org.uk>, Vladimir Murzin <vladimir.murzin@arm.com>, "afzal.mohd.ma@gmail.com" <afzal.mohd.ma@gmail.com> Subject: RE: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support Date: Thu, 11 Mar 2021 10:26:34 +0000 [thread overview] Message-ID: <AS8PR10MB47127FD40F6782B279B5998BEE909@AS8PR10MB4712.EURPRD10.PROD.OUTLOOK.COM> (raw) In-Reply-To: <CAL9mu0LwT7GqWQY1Dpw3zLnS+oX8KFq=Lrp6NSBJvSgcsxEQVQ@mail.gmail.com> Hi Dillon > -----Original Message----- > From: dillon min <dillon.minfei@gmail.com> > Sent: mercredi 10 mars 2021 12:48 > To: Rob Herring <robh+dt@kernel.org>; Maxime Coquelin > <mcoquelin.stm32@gmail.com>; Alexandre TORGUE > <alexandre.torgue@st.com>; open list:OPEN FIRMWARE AND FLATTENED > DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; linux-stm32@st-md- > mailman.stormreply.com; Linux ARM <linux-arm- > kernel@lists.infradead.org>; Linux Kernel Mailing List <linux- > kernel@vger.kernel.org>; linux@armlinux.org.uk; Vladimir Murzin > <vladimir.murzin@arm.com>; afzal.mohd.ma@gmail.com > Subject: Re: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board > support > > for the device tree part , still waiting review. just a gentle ping. > if Mr Alexandre torgue can take a look, would be great. > Sorry for the delay. For next versions can you send it to Alexandre.torgue@foss.st.com please. Thanks Alex > thanks, > > On Wed, Mar 3, 2021 at 4:05 PM <dillon.minfei@gmail.com> wrote: > > > > From: dillon min <dillon.minfei@gmail.com> > > > > This patchset intend to add art-pi board support, this board developed > > by rt-thread(https://www.rt-thread.org/). > > > > Board resources: > > > > 8MiB QSPI flash > > 16MiB SPI flash > > 32MiB SDRAM > > AP6212 wifi,bt,fm comb > > > > sw context: > > - as stm32h750 just has 128k bytes internal flash, so running a fw on > > internal flash to download u-boot/kernel to qspi flash, boot > > u-boot/kernel from qspi flash. this fw is based on rt-thread. > > - kernel can be xip on qspi flash or load to sdram > > - root filesystem is jffs2(created by buildroot), stored on spi flash > > > > to support the boad, add following changes. > > - fix r0-r3, r12 register restore failed after svc call, > > - add dts binding > > - update yaml doc > > > > dillon min (8): > > ARM: ARMv7-M: Fix register restore corrupt after svc call > > Documentation: arm: stm32: Add stm32h750 value line > > dt-bindings: arm: stm32: Add compatible strings for ART-PI board > > dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl > > ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x > > ARM: dts: stm32: add stm32h750-pinctrl.dtsi > > ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 > > ARM: stm32: add initial support for stm32h750 > > > > Documentation/arm/index.rst | 1 + > > Documentation/arm/stm32/stm32h750-overview.rst | 33 ++ > > .../devicetree/bindings/arm/stm32/stm32.yaml | 4 + > > .../bindings/pinctrl/st,stm32-pinctrl.yaml | 1 + > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 392 > +++++++++++++++++++++ > > arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +--------------- > > arch/arm/boot/dts/stm32h743.dtsi | 30 ++ > > arch/arm/boot/dts/stm32h750-pinctrl.dtsi | 11 + > > arch/arm/boot/dts/stm32h750.dtsi | 5 + > > arch/arm/boot/dts/stm32h750i-art-pi.dts | 227 ++++++++++++ > > arch/arm/mach-stm32/board-dt.c | 1 + > > arch/arm/mm/proc-v7m.S | 5 +- > > 13 files changed, 716 insertions(+), 302 deletions(-) create mode > > 100644 Documentation/arm/stm32/stm32h750-overview.rst > > create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi > > create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi > > create mode 100644 arch/arm/boot/dts/stm32h750.dtsi create mode > > 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts > > > > -- > > 2.7.4 > >
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre TORGUE <alexandre.torgue@st.com> To: dillon min <dillon.minfei@gmail.com>, Rob Herring <robh+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, "linux-stm32@st-md-mailman.stormreply.com" <linux-stm32@st-md-mailman.stormreply.com>, Linux ARM <linux-arm-kernel@lists.infradead.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, "linux@armlinux.org.uk" <linux@armlinux.org.uk>, Vladimir Murzin <vladimir.murzin@arm.com>, "afzal.mohd.ma@gmail.com" <afzal.mohd.ma@gmail.com> Subject: RE: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support Date: Thu, 11 Mar 2021 10:26:34 +0000 [thread overview] Message-ID: <AS8PR10MB47127FD40F6782B279B5998BEE909@AS8PR10MB4712.EURPRD10.PROD.OUTLOOK.COM> (raw) In-Reply-To: <CAL9mu0LwT7GqWQY1Dpw3zLnS+oX8KFq=Lrp6NSBJvSgcsxEQVQ@mail.gmail.com> Hi Dillon > -----Original Message----- > From: dillon min <dillon.minfei@gmail.com> > Sent: mercredi 10 mars 2021 12:48 > To: Rob Herring <robh+dt@kernel.org>; Maxime Coquelin > <mcoquelin.stm32@gmail.com>; Alexandre TORGUE > <alexandre.torgue@st.com>; open list:OPEN FIRMWARE AND FLATTENED > DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; linux-stm32@st-md- > mailman.stormreply.com; Linux ARM <linux-arm- > kernel@lists.infradead.org>; Linux Kernel Mailing List <linux- > kernel@vger.kernel.org>; linux@armlinux.org.uk; Vladimir Murzin > <vladimir.murzin@arm.com>; afzal.mohd.ma@gmail.com > Subject: Re: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board > support > > for the device tree part , still waiting review. just a gentle ping. > if Mr Alexandre torgue can take a look, would be great. > Sorry for the delay. For next versions can you send it to Alexandre.torgue@foss.st.com please. Thanks Alex > thanks, > > On Wed, Mar 3, 2021 at 4:05 PM <dillon.minfei@gmail.com> wrote: > > > > From: dillon min <dillon.minfei@gmail.com> > > > > This patchset intend to add art-pi board support, this board developed > > by rt-thread(https://www.rt-thread.org/). > > > > Board resources: > > > > 8MiB QSPI flash > > 16MiB SPI flash > > 32MiB SDRAM > > AP6212 wifi,bt,fm comb > > > > sw context: > > - as stm32h750 just has 128k bytes internal flash, so running a fw on > > internal flash to download u-boot/kernel to qspi flash, boot > > u-boot/kernel from qspi flash. this fw is based on rt-thread. > > - kernel can be xip on qspi flash or load to sdram > > - root filesystem is jffs2(created by buildroot), stored on spi flash > > > > to support the boad, add following changes. > > - fix r0-r3, r12 register restore failed after svc call, > > - add dts binding > > - update yaml doc > > > > dillon min (8): > > ARM: ARMv7-M: Fix register restore corrupt after svc call > > Documentation: arm: stm32: Add stm32h750 value line > > dt-bindings: arm: stm32: Add compatible strings for ART-PI board > > dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl > > ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x > > ARM: dts: stm32: add stm32h750-pinctrl.dtsi > > ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 > > ARM: stm32: add initial support for stm32h750 > > > > Documentation/arm/index.rst | 1 + > > Documentation/arm/stm32/stm32h750-overview.rst | 33 ++ > > .../devicetree/bindings/arm/stm32/stm32.yaml | 4 + > > .../bindings/pinctrl/st,stm32-pinctrl.yaml | 1 + > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 392 > +++++++++++++++++++++ > > arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +--------------- > > arch/arm/boot/dts/stm32h743.dtsi | 30 ++ > > arch/arm/boot/dts/stm32h750-pinctrl.dtsi | 11 + > > arch/arm/boot/dts/stm32h750.dtsi | 5 + > > arch/arm/boot/dts/stm32h750i-art-pi.dts | 227 ++++++++++++ > > arch/arm/mach-stm32/board-dt.c | 1 + > > arch/arm/mm/proc-v7m.S | 5 +- > > 13 files changed, 716 insertions(+), 302 deletions(-) create mode > > 100644 Documentation/arm/stm32/stm32h750-overview.rst > > create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi > > create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi > > create mode 100644 arch/arm/boot/dts/stm32h750.dtsi create mode > > 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts > > > > -- > > 2.7.4 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-11 10:27 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-03 8:05 [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-03 8:05 ` [PATCH 1/8] ARM: ARMv7-M: Fix register restore corrupt after svc call dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-03 9:52 ` Vladimir Murzin 2021-03-03 9:52 ` Vladimir Murzin 2021-03-03 13:35 ` dillon min 2021-03-03 13:35 ` dillon min 2021-03-03 14:19 ` Vladimir Murzin 2021-03-03 14:19 ` Vladimir Murzin 2021-03-04 5:42 ` dillon min 2021-03-04 5:42 ` dillon min 2021-03-04 9:02 ` Vladimir Murzin 2021-03-04 9:02 ` Vladimir Murzin 2021-03-03 8:05 ` [PATCH 2/8] Documentation: arm: stm32: Add stm32h750 value line dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-03 8:05 ` [PATCH 3/8] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-08 19:50 ` Rob Herring 2021-03-08 19:50 ` Rob Herring 2021-03-03 8:05 ` [PATCH 4/8] dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-08 19:50 ` Rob Herring 2021-03-08 19:50 ` Rob Herring 2021-03-03 8:05 ` [PATCH 5/8] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-11 10:40 ` Alexandre TORGUE 2021-03-11 10:40 ` Alexandre TORGUE 2021-03-11 12:23 ` dillon min 2021-03-11 12:23 ` dillon min 2021-03-11 12:54 ` [Linux-stm32] " Ahmad Fatoum 2021-03-11 12:54 ` Ahmad Fatoum 2021-03-11 13:03 ` dillon min 2021-03-11 13:03 ` dillon min 2021-03-11 13:30 ` Alexandre TORGUE 2021-03-11 13:30 ` Alexandre TORGUE 2021-03-11 14:32 ` dillon min 2021-03-11 14:32 ` dillon min 2021-03-11 14:50 ` Alexandre TORGUE 2021-03-11 14:50 ` Alexandre TORGUE 2021-03-03 8:05 ` [PATCH 6/8] ARM: dts: stm32: add stm32h750-pinctrl.dtsi dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-03 8:05 ` [PATCH 7/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-11 10:42 ` Alexandre TORGUE 2021-03-11 10:42 ` Alexandre TORGUE 2021-03-11 12:32 ` dillon min 2021-03-11 12:32 ` dillon min 2021-03-11 13:31 ` Alexandre TORGUE 2021-03-11 13:31 ` Alexandre TORGUE 2021-03-03 8:05 ` [PATCH 8/8] ARM: stm32: add initial support for stm32h750 dillon.minfei 2021-03-03 8:05 ` dillon.minfei 2021-03-11 10:43 ` Alexandre TORGUE 2021-03-11 10:43 ` Alexandre TORGUE 2021-03-11 12:34 ` dillon min 2021-03-11 12:34 ` dillon min 2021-03-10 11:47 ` [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon min 2021-03-10 11:47 ` dillon min 2021-03-11 10:26 ` Alexandre TORGUE [this message] 2021-03-11 10:26 ` Alexandre TORGUE 2021-03-11 11:30 ` dillon min 2021-03-11 11:30 ` dillon min
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=AS8PR10MB47127FD40F6782B279B5998BEE909@AS8PR10MB4712.EURPRD10.PROD.OUTLOOK.COM \ --to=alexandre.torgue@st.com \ --cc=afzal.mohd.ma@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=dillon.minfei@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=linux@armlinux.org.uk \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ --cc=vladimir.murzin@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.