All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shengjiu Wang <shengjiu.wang@gmail.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Shengjiu Wang <shengjiu.wang@nxp.com>,
	sakari.ailus@iki.fi, tfiga@chromium.org,
	m.szyprowski@samsung.com, mchehab@kernel.org,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	Xiubo.Lee@gmail.com, festevam@gmail.com, nicoleotsuka@gmail.com,
	lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz,
	tiwai@suse.com, alsa-devel@alsa-project.org,
	linuxppc-dev@lists.ozlabs.org
Subject: Re: [RFC PATCH v8 00/13] Add audio support in v4l2 framework
Date: Mon, 30 Oct 2023 09:56:22 +0800	[thread overview]
Message-ID: <CAA+D8AOCujL-eD2-chqHAW7UN7UmLrO6CWRd7d6wTCPP8=VyfA@mail.gmail.com> (raw)
In-Reply-To: <c1cfa3e0-6e5d-4e1d-b6e0-4d1045196a11@xs4all.nl>

On Fri, Oct 27, 2023 at 7:18 PM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> Hi Shengjiu,
>
> Is there a reason why this series is still marked RFC?
>
> Just wondering about that.

In the very beginning I started this series with RFC, So
I still use RFC now...

Best regards
Wang shengjiu
>
> Regards,
>
>         Hans
>
> On 27/10/2023 12:35, Shengjiu Wang wrote:
> > Audio signal processing also has the requirement for memory to
> > memory similar as Video.
> >
> > This asrc memory to memory (memory ->asrc->memory) case is a non
> > real time use case.
> >
> > User fills the input buffer to the asrc module, after conversion, then asrc
> > sends back the output buffer to user. So it is not a traditional ALSA playback
> > and capture case.
> >
> > It is a specific use case,  there is no reference in current kernel.
> > v4l2 memory to memory is the closed implementation,  v4l2 current
> > support video, image, radio, tuner, touch devices, so it is not
> > complicated to add support for this specific audio case.
> >
> > Because we had implemented the "memory -> asrc ->i2s device-> codec"
> > use case in ALSA.  Now the "memory->asrc->memory" needs
> > to reuse the code in asrc driver, so the first 3 patches is for refining
> > the code to make it can be shared by the "memory->asrc->memory"
> > driver.
> >
> > The main change is in the v4l2 side, A /dev/vl4-audioX will be created,
> > user applications only use the ioctl of v4l2 framework.
> >
> > Other change is to add memory to memory support for two kinds of i.MX ASRC
> > module.
> >
> > changes in v8:
> > - refine V4L2_CAP_AUDIO_M2M to be 0x00000008
> > - update doc for FIXED_POINT
> > - address comments for imx-asrc
> >
> > changes in v7:
> > - add acked-by from Mark
> > - separate commit for fixed point, m2m audio class, audio rate controls
> > - use INTEGER_MENU for rate,  FIXED_POINT for rate offset
> > - remove used fmts
> > - address other comments for Hans
> >
> > changes in v6:
> > - use m2m_prepare/m2m_unprepare/m2m_start/m2m_stop to replace
> >   m2m_start_part_one/m2m_stop_part_one, m2m_start_part_two/m2m_stop_part_two.
> > - change V4L2_CTRL_TYPE_ASRC_RATE to V4L2_CTRL_TYPE_FIXED_POINT
> > - fix warning by kernel test rebot
> > - remove some unused format V4L2_AUDIO_FMT_XX
> > - Get SNDRV_PCM_FORMAT from V4L2_AUDIO_FMT in driver.
> > - rename audm2m to viaudm2m.
> >
> > changes in v5:
> > - remove V4L2_AUDIO_FMT_LPCM
> > - define audio pixel format like V4L2_AUDIO_FMT_S8...
> > - remove rate and format in struct v4l2_audio_format.
> > - Add V4L2_CID_ASRC_SOURCE_RATE and V4L2_CID_ASRC_DEST_RATE controls
> > - updata document accordingly.
> >
> > changes in v4:
> > - update document style
> > - separate V4L2_AUDIO_FMT_LPCM and V4L2_CAP_AUDIO_M2M in separate commit
> >
> > changes in v3:
> > - Modify documents for adding audio m2m support
> > - Add audio virtual m2m driver
> > - Defined V4L2_AUDIO_FMT_LPCM format type for audio.
> > - Defined V4L2_CAP_AUDIO_M2M capability type for audio m2m case.
> > - with modification in v4l-utils, pass v4l2-compliance test.
> >
> > changes in v2:
> > - decouple the implementation in v4l2 and ALSA
> > - implement the memory to memory driver as a platfrom driver
> >   and move it to driver/media
> > - move fsl_asrc_common.h to include/sound folder
> >
> > Shengjiu Wang (13):
> >   ASoC: fsl_asrc: define functions for memory to memory usage
> >   ASoC: fsl_easrc: define functions for memory to memory usage
> >   ASoC: fsl_asrc: move fsl_asrc_common.h to include/sound
> >   ASoC: fsl_asrc: register m2m platform device
> >   ASoC: fsl_easrc: register m2m platform device
> >   media: uapi: Add V4L2_CAP_AUDIO_M2M capability flag
> >   media: v4l2: Add audio capture and output support
> >   media: uapi: Define audio sample format fourcc type
> >   media: uapi: Add V4L2_CTRL_CLASS_M2M_AUDIO
> >   media: uapi: Add V4L2_CTRL_TYPE_FIXED_POINT
> >   media: uapi: Add audio rate controls support
> >   media: imx-asrc: Add memory to memory driver
> >   media: vim2m_audio: add virtual driver for audio memory to memory
> >
> >  .../userspace-api/media/v4l/buffer.rst        |    6 +
> >  .../userspace-api/media/v4l/common.rst        |    1 +
> >  .../media/v4l/dev-audio-mem2mem.rst           |   71 +
> >  .../userspace-api/media/v4l/devices.rst       |    1 +
> >  .../media/v4l/ext-ctrls-audio-m2m.rst         |   41 +
> >  .../userspace-api/media/v4l/pixfmt-audio.rst  |   87 ++
> >  .../userspace-api/media/v4l/pixfmt.rst        |    1 +
> >  .../media/v4l/vidioc-enum-fmt.rst             |    2 +
> >  .../media/v4l/vidioc-g-ext-ctrls.rst          |   17 +-
> >  .../userspace-api/media/v4l/vidioc-g-fmt.rst  |    4 +
> >  .../media/v4l/vidioc-querycap.rst             |    3 +
> >  .../media/v4l/vidioc-queryctrl.rst            |    9 +-
> >  .../media/videodev2.h.rst.exceptions          |    4 +
> >  .../media/common/videobuf2/videobuf2-v4l2.c   |    4 +
> >  drivers/media/platform/nxp/Kconfig            |   12 +
> >  drivers/media/platform/nxp/Makefile           |    1 +
> >  drivers/media/platform/nxp/imx-asrc.c         | 1186 +++++++++++++++++
> >  drivers/media/test-drivers/Kconfig            |    9 +
> >  drivers/media/test-drivers/Makefile           |    1 +
> >  drivers/media/test-drivers/vim2m_audio.c      |  680 ++++++++++
> >  drivers/media/v4l2-core/v4l2-ctrls-api.c      |    5 +-
> >  drivers/media/v4l2-core/v4l2-ctrls-core.c     |    2 +
> >  drivers/media/v4l2-core/v4l2-ctrls-defs.c     |   16 +
> >  drivers/media/v4l2-core/v4l2-dev.c            |   17 +
> >  drivers/media/v4l2-core/v4l2-ioctl.c          |   66 +
> >  include/media/v4l2-dev.h                      |    2 +
> >  include/media/v4l2-ioctl.h                    |   34 +
> >  .../fsl => include/sound}/fsl_asrc_common.h   |   60 +
> >  include/uapi/linux/v4l2-controls.h            |    9 +
> >  include/uapi/linux/videodev2.h                |   42 +
> >  sound/soc/fsl/fsl_asrc.c                      |  144 ++
> >  sound/soc/fsl/fsl_asrc.h                      |    4 +-
> >  sound/soc/fsl/fsl_asrc_dma.c                  |    2 +-
> >  sound/soc/fsl/fsl_easrc.c                     |  233 ++++
> >  sound/soc/fsl/fsl_easrc.h                     |    6 +-
> >  35 files changed, 2771 insertions(+), 11 deletions(-)
> >  create mode 100644 Documentation/userspace-api/media/v4l/dev-audio-mem2mem.rst
> >  create mode 100644 Documentation/userspace-api/media/v4l/ext-ctrls-audio-m2m.rst
> >  create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-audio.rst
> >  create mode 100644 drivers/media/platform/nxp/imx-asrc.c
> >  create mode 100644 drivers/media/test-drivers/vim2m_audio.c
> >  rename {sound/soc/fsl => include/sound}/fsl_asrc_common.h (60%)
> >
>

WARNING: multiple messages have this Message-ID (diff)
From: Shengjiu Wang <shengjiu.wang@gmail.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: alsa-devel@alsa-project.org, lgirdwood@gmail.com,
	Xiubo.Lee@gmail.com, linux-kernel@vger.kernel.org,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	tiwai@suse.com, linux-media@vger.kernel.org, tfiga@chromium.org,
	nicoleotsuka@gmail.com, linuxppc-dev@lists.ozlabs.org,
	broonie@kernel.org, sakari.ailus@iki.fi, perex@perex.cz,
	mchehab@kernel.org, festevam@gmail.com, m.szyprowski@samsung.com
Subject: Re: [RFC PATCH v8 00/13] Add audio support in v4l2 framework
Date: Mon, 30 Oct 2023 09:56:22 +0800	[thread overview]
Message-ID: <CAA+D8AOCujL-eD2-chqHAW7UN7UmLrO6CWRd7d6wTCPP8=VyfA@mail.gmail.com> (raw)
In-Reply-To: <c1cfa3e0-6e5d-4e1d-b6e0-4d1045196a11@xs4all.nl>

On Fri, Oct 27, 2023 at 7:18 PM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> Hi Shengjiu,
>
> Is there a reason why this series is still marked RFC?
>
> Just wondering about that.

In the very beginning I started this series with RFC, So
I still use RFC now...

Best regards
Wang shengjiu
>
> Regards,
>
>         Hans
>
> On 27/10/2023 12:35, Shengjiu Wang wrote:
> > Audio signal processing also has the requirement for memory to
> > memory similar as Video.
> >
> > This asrc memory to memory (memory ->asrc->memory) case is a non
> > real time use case.
> >
> > User fills the input buffer to the asrc module, after conversion, then asrc
> > sends back the output buffer to user. So it is not a traditional ALSA playback
> > and capture case.
> >
> > It is a specific use case,  there is no reference in current kernel.
> > v4l2 memory to memory is the closed implementation,  v4l2 current
> > support video, image, radio, tuner, touch devices, so it is not
> > complicated to add support for this specific audio case.
> >
> > Because we had implemented the "memory -> asrc ->i2s device-> codec"
> > use case in ALSA.  Now the "memory->asrc->memory" needs
> > to reuse the code in asrc driver, so the first 3 patches is for refining
> > the code to make it can be shared by the "memory->asrc->memory"
> > driver.
> >
> > The main change is in the v4l2 side, A /dev/vl4-audioX will be created,
> > user applications only use the ioctl of v4l2 framework.
> >
> > Other change is to add memory to memory support for two kinds of i.MX ASRC
> > module.
> >
> > changes in v8:
> > - refine V4L2_CAP_AUDIO_M2M to be 0x00000008
> > - update doc for FIXED_POINT
> > - address comments for imx-asrc
> >
> > changes in v7:
> > - add acked-by from Mark
> > - separate commit for fixed point, m2m audio class, audio rate controls
> > - use INTEGER_MENU for rate,  FIXED_POINT for rate offset
> > - remove used fmts
> > - address other comments for Hans
> >
> > changes in v6:
> > - use m2m_prepare/m2m_unprepare/m2m_start/m2m_stop to replace
> >   m2m_start_part_one/m2m_stop_part_one, m2m_start_part_two/m2m_stop_part_two.
> > - change V4L2_CTRL_TYPE_ASRC_RATE to V4L2_CTRL_TYPE_FIXED_POINT
> > - fix warning by kernel test rebot
> > - remove some unused format V4L2_AUDIO_FMT_XX
> > - Get SNDRV_PCM_FORMAT from V4L2_AUDIO_FMT in driver.
> > - rename audm2m to viaudm2m.
> >
> > changes in v5:
> > - remove V4L2_AUDIO_FMT_LPCM
> > - define audio pixel format like V4L2_AUDIO_FMT_S8...
> > - remove rate and format in struct v4l2_audio_format.
> > - Add V4L2_CID_ASRC_SOURCE_RATE and V4L2_CID_ASRC_DEST_RATE controls
> > - updata document accordingly.
> >
> > changes in v4:
> > - update document style
> > - separate V4L2_AUDIO_FMT_LPCM and V4L2_CAP_AUDIO_M2M in separate commit
> >
> > changes in v3:
> > - Modify documents for adding audio m2m support
> > - Add audio virtual m2m driver
> > - Defined V4L2_AUDIO_FMT_LPCM format type for audio.
> > - Defined V4L2_CAP_AUDIO_M2M capability type for audio m2m case.
> > - with modification in v4l-utils, pass v4l2-compliance test.
> >
> > changes in v2:
> > - decouple the implementation in v4l2 and ALSA
> > - implement the memory to memory driver as a platfrom driver
> >   and move it to driver/media
> > - move fsl_asrc_common.h to include/sound folder
> >
> > Shengjiu Wang (13):
> >   ASoC: fsl_asrc: define functions for memory to memory usage
> >   ASoC: fsl_easrc: define functions for memory to memory usage
> >   ASoC: fsl_asrc: move fsl_asrc_common.h to include/sound
> >   ASoC: fsl_asrc: register m2m platform device
> >   ASoC: fsl_easrc: register m2m platform device
> >   media: uapi: Add V4L2_CAP_AUDIO_M2M capability flag
> >   media: v4l2: Add audio capture and output support
> >   media: uapi: Define audio sample format fourcc type
> >   media: uapi: Add V4L2_CTRL_CLASS_M2M_AUDIO
> >   media: uapi: Add V4L2_CTRL_TYPE_FIXED_POINT
> >   media: uapi: Add audio rate controls support
> >   media: imx-asrc: Add memory to memory driver
> >   media: vim2m_audio: add virtual driver for audio memory to memory
> >
> >  .../userspace-api/media/v4l/buffer.rst        |    6 +
> >  .../userspace-api/media/v4l/common.rst        |    1 +
> >  .../media/v4l/dev-audio-mem2mem.rst           |   71 +
> >  .../userspace-api/media/v4l/devices.rst       |    1 +
> >  .../media/v4l/ext-ctrls-audio-m2m.rst         |   41 +
> >  .../userspace-api/media/v4l/pixfmt-audio.rst  |   87 ++
> >  .../userspace-api/media/v4l/pixfmt.rst        |    1 +
> >  .../media/v4l/vidioc-enum-fmt.rst             |    2 +
> >  .../media/v4l/vidioc-g-ext-ctrls.rst          |   17 +-
> >  .../userspace-api/media/v4l/vidioc-g-fmt.rst  |    4 +
> >  .../media/v4l/vidioc-querycap.rst             |    3 +
> >  .../media/v4l/vidioc-queryctrl.rst            |    9 +-
> >  .../media/videodev2.h.rst.exceptions          |    4 +
> >  .../media/common/videobuf2/videobuf2-v4l2.c   |    4 +
> >  drivers/media/platform/nxp/Kconfig            |   12 +
> >  drivers/media/platform/nxp/Makefile           |    1 +
> >  drivers/media/platform/nxp/imx-asrc.c         | 1186 +++++++++++++++++
> >  drivers/media/test-drivers/Kconfig            |    9 +
> >  drivers/media/test-drivers/Makefile           |    1 +
> >  drivers/media/test-drivers/vim2m_audio.c      |  680 ++++++++++
> >  drivers/media/v4l2-core/v4l2-ctrls-api.c      |    5 +-
> >  drivers/media/v4l2-core/v4l2-ctrls-core.c     |    2 +
> >  drivers/media/v4l2-core/v4l2-ctrls-defs.c     |   16 +
> >  drivers/media/v4l2-core/v4l2-dev.c            |   17 +
> >  drivers/media/v4l2-core/v4l2-ioctl.c          |   66 +
> >  include/media/v4l2-dev.h                      |    2 +
> >  include/media/v4l2-ioctl.h                    |   34 +
> >  .../fsl => include/sound}/fsl_asrc_common.h   |   60 +
> >  include/uapi/linux/v4l2-controls.h            |    9 +
> >  include/uapi/linux/videodev2.h                |   42 +
> >  sound/soc/fsl/fsl_asrc.c                      |  144 ++
> >  sound/soc/fsl/fsl_asrc.h                      |    4 +-
> >  sound/soc/fsl/fsl_asrc_dma.c                  |    2 +-
> >  sound/soc/fsl/fsl_easrc.c                     |  233 ++++
> >  sound/soc/fsl/fsl_easrc.h                     |    6 +-
> >  35 files changed, 2771 insertions(+), 11 deletions(-)
> >  create mode 100644 Documentation/userspace-api/media/v4l/dev-audio-mem2mem.rst
> >  create mode 100644 Documentation/userspace-api/media/v4l/ext-ctrls-audio-m2m.rst
> >  create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-audio.rst
> >  create mode 100644 drivers/media/platform/nxp/imx-asrc.c
> >  create mode 100644 drivers/media/test-drivers/vim2m_audio.c
> >  rename {sound/soc/fsl => include/sound}/fsl_asrc_common.h (60%)
> >
>

  reply	other threads:[~2023-10-30  1:56 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-27 10:35 [RFC PATCH v8 00/13] Add audio support in v4l2 framework Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 01/13] ASoC: fsl_asrc: define functions for memory to memory usage Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 02/13] ASoC: fsl_easrc: " Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 03/13] ASoC: fsl_asrc: move fsl_asrc_common.h to include/sound Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 04/13] ASoC: fsl_asrc: register m2m platform device Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 05/13] ASoC: fsl_easrc: " Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 06/13] media: uapi: Add V4L2_CAP_AUDIO_M2M capability flag Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 07/13] media: v4l2: Add audio capture and output support Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 08/13] media: uapi: Define audio sample format fourcc type Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 09/13] media: uapi: Add V4L2_CTRL_CLASS_M2M_AUDIO Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 10/13] media: uapi: Add V4L2_CTRL_TYPE_FIXED_POINT Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 11/13] media: uapi: Add audio rate controls support Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 12/13] media: imx-asrc: Add memory to memory driver Shengjiu Wang
2023-10-27 10:35 ` [RFC PATCH v8 13/13] media: vim2m_audio: add virtual driver for audio memory to memory Shengjiu Wang
2023-11-06 13:58   ` Hans Verkuil
2023-11-07  9:41     ` Hans Verkuil
2023-11-07  9:46       ` [RFC PATCH] v4l-utils: add support for v4l-audioX devices Hans Verkuil
2023-10-27 11:18 ` [RFC PATCH v8 00/13] Add audio support in v4l2 framework Hans Verkuil
2023-10-30  1:56   ` Shengjiu Wang [this message]
2023-10-30  1:56     ` Shengjiu Wang
2023-10-30 11:35     ` Daniel Baluta
2023-10-30 11:35       ` Daniel Baluta
2023-11-01 11:05     ` Shengjiu Wang
2023-11-01 11:05       ` Shengjiu Wang
2023-11-01 11:45       ` Hans Verkuil
2023-11-01 11:45         ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAA+D8AOCujL-eD2-chqHAW7UN7UmLrO6CWRd7d6wTCPP8=VyfA@mail.gmail.com' \
    --to=shengjiu.wang@gmail.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=hverkuil@xs4all.nl \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mchehab@kernel.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=sakari.ailus@iki.fi \
    --cc=shengjiu.wang@nxp.com \
    --cc=tfiga@chromium.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.