All of lore.kernel.org
 help / color / mirror / Atom feed
From: Romain Perier <romain.perier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Cc: "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	"open list:ARM/Rockchip SoC..."
	<linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] ARM: dts: rockchip: Add DMA tx and rx channels in UART interfaces for RK3288 SoCs
Date: Tue, 23 Jun 2015 13:55:52 +0200	[thread overview]
Message-ID: <CABgxDoJo4=LafA+rf+gN_U=QY0reK3ux8RzHCaYXWfw9FkiLYA@mail.gmail.com> (raw)
In-Reply-To: <1475991.JRcDMpQrFc@diego>

Hi Heiko,

Oh sure, I completly forgot this issue ^^ , no problem. If you want
some help feel free to ping on IRC.
I did not notice regressions or issues, but my system was not under
load, I will try to investigate and/or test with care.

Have a nice day,
Romain

2015-06-23 13:09 GMT+02:00 Heiko Stübner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>:
> Hi Romain,
>
> Am Dienstag, 23. Juni 2015, 08:53:17 schrieb Romain Perier:
>> ping :)
>
> I haven't forgotten this patch :-)
>
> I just haven't fully made up my mind concerning the bug in the pl330
> implementation on Rockchip SoCs - aka if we'll make it worse by also enabling
> dma on the uarts.
>
> So far the problem reports I read only mentioned degraded functionality like
> popping sounds in audio, not full system failures or freezes. So I tend to
> include the patch and see what happens ;-)
>
>
> Heiko
>
>
>
>> 2015-06-16 19:19 GMT+02:00 Romain Perier <romain.perier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
>> > This enable DMA capability for the corresponding UART interfaces, also it
>> > removes warning "ttyS%d - Failed to request dma" from kernel logs.
>> >
>> > Signed-off-by: Romain Perier <romain.perier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> > ---
>> >
>> > Changes since v1 ("[PATCH] ARM: dts: rockchip: Add dmac_bus rx and tx for
> uart2"):
>> >         - Add DMA tx and rx channels for all UART interfaces
>> >         - Rename commit summary
>> >
>> >  arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
>> >  1 file changed, 10 insertions(+)
>> >
>> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> > index 22316d0..1996452 100644
>> > --- a/arch/arm/boot/dts/rk3288.dtsi
>> > +++ b/arch/arm/boot/dts/rk3288.dtsi
>> > @@ -359,6 +359,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart0_xfer>;
>> >
>> > +               dmas = <&dmac_peri 1>, <&dmac_peri 2>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -372,6 +374,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart1_xfer>;
>> >
>> > +               dmas = <&dmac_peri 3>, <&dmac_peri 4>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -385,6 +389,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart2_xfer>;
>> >
>> > +               dmas = <&dmac_bus_s 4>, <&dmac_bus_s 5>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -398,6 +404,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart3_xfer>;
>> >
>> > +               dmas = <&dmac_peri 7>, <&dmac_peri 8>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -411,6 +419,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart4_xfer>;
>> >
>> > +               dmas = <&dmac_peri 9>, <&dmac_peri 10>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > --
>> > 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: romain.perier@gmail.com (Romain Perier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: rockchip: Add DMA tx and rx channels in UART interfaces for RK3288 SoCs
Date: Tue, 23 Jun 2015 13:55:52 +0200	[thread overview]
Message-ID: <CABgxDoJo4=LafA+rf+gN_U=QY0reK3ux8RzHCaYXWfw9FkiLYA@mail.gmail.com> (raw)
In-Reply-To: <1475991.JRcDMpQrFc@diego>

Hi Heiko,

Oh sure, I completly forgot this issue ^^ , no problem. If you want
some help feel free to ping on IRC.
I did not notice regressions or issues, but my system was not under
load, I will try to investigate and/or test with care.

Have a nice day,
Romain

2015-06-23 13:09 GMT+02:00 Heiko St?bner <heiko@sntech.de>:
> Hi Romain,
>
> Am Dienstag, 23. Juni 2015, 08:53:17 schrieb Romain Perier:
>> ping :)
>
> I haven't forgotten this patch :-)
>
> I just haven't fully made up my mind concerning the bug in the pl330
> implementation on Rockchip SoCs - aka if we'll make it worse by also enabling
> dma on the uarts.
>
> So far the problem reports I read only mentioned degraded functionality like
> popping sounds in audio, not full system failures or freezes. So I tend to
> include the patch and see what happens ;-)
>
>
> Heiko
>
>
>
>> 2015-06-16 19:19 GMT+02:00 Romain Perier <romain.perier@gmail.com>:
>> > This enable DMA capability for the corresponding UART interfaces, also it
>> > removes warning "ttyS%d - Failed to request dma" from kernel logs.
>> >
>> > Signed-off-by: Romain Perier <romain.perier@gmail.com>
>> > ---
>> >
>> > Changes since v1 ("[PATCH] ARM: dts: rockchip: Add dmac_bus rx and tx for
> uart2"):
>> >         - Add DMA tx and rx channels for all UART interfaces
>> >         - Rename commit summary
>> >
>> >  arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
>> >  1 file changed, 10 insertions(+)
>> >
>> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> > index 22316d0..1996452 100644
>> > --- a/arch/arm/boot/dts/rk3288.dtsi
>> > +++ b/arch/arm/boot/dts/rk3288.dtsi
>> > @@ -359,6 +359,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart0_xfer>;
>> >
>> > +               dmas = <&dmac_peri 1>, <&dmac_peri 2>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -372,6 +374,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart1_xfer>;
>> >
>> > +               dmas = <&dmac_peri 3>, <&dmac_peri 4>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -385,6 +389,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart2_xfer>;
>> >
>> > +               dmas = <&dmac_bus_s 4>, <&dmac_bus_s 5>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -398,6 +404,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart3_xfer>;
>> >
>> > +               dmas = <&dmac_peri 7>, <&dmac_peri 8>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > @@ -411,6 +419,8 @@
>> >
>> >                 clock-names = "baudclk", "apb_pclk";
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&uart4_xfer>;
>> >
>> > +               dmas = <&dmac_peri 9>, <&dmac_peri 10>;
>> > +               dma-names = "tx", "rx";
>> >
>> >                 status = "disabled";
>> >
>> >         };
>> >
>> > --
>> > 1.9.1
>

  reply	other threads:[~2015-06-23 11:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-16 17:19 [PATCH] ARM: dts: rockchip: Add DMA tx and rx channels in UART interfaces for RK3288 SoCs Romain Perier
2015-06-16 17:19 ` Romain Perier
     [not found] ` <1434475166-30338-1-git-send-email-romain.perier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-06-23  6:53   ` Romain Perier
2015-06-23  6:53     ` Romain Perier
     [not found]     ` <CABgxDo+8MafT8hOzpG=gjju=S7bVtNBOKxmi_JPHv1bDZSGeCQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-06-23 11:09       ` Heiko Stübner
2015-06-23 11:09         ` Heiko Stübner
2015-06-23 11:55         ` Romain Perier [this message]
2015-06-23 11:55           ` Romain Perier
2015-06-23 21:11         ` Sonny Rao
2015-06-23 21:11           ` Sonny Rao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CABgxDoJo4=LafA+rf+gN_U=QY0reK3ux8RzHCaYXWfw9FkiLYA@mail.gmail.com' \
    --to=romain.perier-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.