From: Alex Deucher <alexdeucher@gmail.com>
To: Mark Yacoub <markyacoub@chromium.org>
Cc: Maling list - DRI developers <dri-devel@lists.freedesktop.org>,
Sean Paul <seanpaul@chromium.org>,
amd-gfx list <amd-gfx@lists.freedesktop.org>,
"Deucher, Alexander" <alexander.deucher@amd.com>,
Christian Koenig <christian.koenig@amd.com>,
Mark Yacoub <markyacoub@google.com>
Subject: Re: [PATCH] drm/amdgpu: Verify bo size can fit framebuffer size on init.
Date: Mon, 8 Mar 2021 16:20:51 -0500 [thread overview]
Message-ID: <CADnq5_N9MEuvpXKAX8aU-6--Etb=a7+20qMdDsgXJWKa_7GsLg@mail.gmail.com> (raw)
In-Reply-To: <20210304191534.1542241-1-markyacoub@chromium.org>
On Thu, Mar 4, 2021 at 2:15 PM Mark Yacoub <markyacoub@chromium.org> wrote:
>
> From: Mark Yacoub <markyacoub@google.com>
>
> To initialize the framebuffer, use drm_gem_fb_init_with_funcs which
> verifies that the BO size can fit the FB size by calculating the minimum
> expected size of each plane.
>
> The bug was caught using igt-gpu-tools test: kms_addfb_basic.too-high
> and kms_addfb_basic.bo-too-small
>
> Tested on ChromeOS Zork by turning on the display and running a YT
> video.
>
> Cc: Alex Deucher <alexander.deucher@amd.com>
> Cc: "Christian König" <christian.koenig@amd.com>
> Cc: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Thanks for the patch. Just a few minor comments below.
Alex
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 66 ++++++++++++++++-----
> drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 4 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h | 8 +++
> 3 files changed, 62 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
> index 48cb33e5b3826..554038e5bbf6a 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
> @@ -870,18 +870,59 @@ static int amdgpu_display_get_fb_info(const struct amdgpu_framebuffer *amdgpu_fb
> return r;
> }
>
> -int amdgpu_display_framebuffer_init(struct drm_device *dev,
> - struct amdgpu_framebuffer *rfb,
> - const struct drm_mode_fb_cmd2 *mode_cmd,
> - struct drm_gem_object *obj)
> +int amdgpu_display_gem_fb_init(struct drm_device *dev,
> + struct amdgpu_framebuffer *rfb,
> + const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj)
> {
> - int ret, i;
> + int ret;
Please add a new line here.
> rfb->base.obj[0] = obj;
> drm_helper_mode_fill_fb_struct(dev, &rfb->base, mode_cmd);
> ret = drm_framebuffer_init(dev, &rfb->base, &amdgpu_fb_funcs);
> if (ret)
> - goto fail;
> + goto err;
> +
> + ret = amdgpu_display_framebuffer_init(dev, rfb, mode_cmd, obj);
> + if (ret)
> + goto err;
> +
> + return 0;
> +err:
> + drm_err(dev, "Failed to init gem fb: %d\n", ret);
> + rfb->base.obj[0] = NULL;
> + return ret;
> +}
> +
> +int amdgpu_display_gem_fb_verify_and_init(
> + struct drm_device *dev, struct amdgpu_framebuffer *rfb,
> + struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj)
> +{
> + int ret;
> + rfb->base.obj[0] = obj;
> + // Verify that bo size can fit the fb size.
Please change this to use C style comments.
> + ret = drm_gem_fb_init_with_funcs(dev, &rfb->base, file_priv, mode_cmd,
> + &amdgpu_fb_funcs);
> + if (ret)
> + goto err;
>
> + ret = amdgpu_display_framebuffer_init(dev, rfb, mode_cmd, obj);
> + if (ret)
> + goto err;
> +
> + return 0;
> +err:
> + drm_err(dev, "Failed to verify and init gem fb: %d\n", ret);
> + rfb->base.obj[0] = NULL;
> + return ret;
> +}
> +
> +int amdgpu_display_framebuffer_init(struct drm_device *dev,
> + struct amdgpu_framebuffer *rfb,
> + const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj)
> +{
> + int ret, i;
New line here.
> /*
> * This needs to happen before modifier conversion as that might change
> * the number of planes.
> @@ -891,13 +932,13 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev,
> drm_dbg_kms(dev, "Plane 0 and %d have different BOs: %u vs. %u\n",
> i, mode_cmd->handles[0], mode_cmd->handles[i]);
> ret = -EINVAL;
> - goto fail;
> + return ret;
> }
> }
>
> ret = amdgpu_display_get_fb_info(rfb, &rfb->tiling_flags, &rfb->tmz_surface);
> if (ret)
> - goto fail;
> + return ret;
>
> if (dev->mode_config.allow_fb_modifiers &&
> !(rfb->base.flags & DRM_MODE_FB_MODIFIERS)) {
> @@ -905,7 +946,7 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev,
> if (ret) {
> drm_dbg_kms(dev, "Failed to convert tiling flags 0x%llX to a modifier",
> rfb->tiling_flags);
> - goto fail;
> + return ret;
> }
> }
>
> @@ -915,10 +956,6 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev,
> }
>
> return 0;
> -
> -fail:
> - rfb->base.obj[0] = NULL;
> - return ret;
> }
>
> struct drm_framebuffer *
> @@ -953,7 +990,8 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
> return ERR_PTR(-ENOMEM);
> }
>
> - ret = amdgpu_display_framebuffer_init(dev, amdgpu_fb, mode_cmd, obj);
> + ret = amdgpu_display_gem_fb_verify_and_init(dev, amdgpu_fb, file_priv,
> + mode_cmd, obj);
> if (ret) {
> kfree(amdgpu_fb);
> drm_gem_object_put(obj);
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
> index 0bf7d36c6686d..22157bd7017c9 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
> @@ -232,8 +232,8 @@ static int amdgpufb_create(struct drm_fb_helper *helper,
> goto out;
> }
>
> - ret = amdgpu_display_framebuffer_init(adev_to_drm(adev), &rfbdev->rfb,
> - &mode_cmd, gobj);
> + ret = amdgpu_display_gem_fb_init(adev_to_drm(adev), &rfbdev->rfb,
> + &mode_cmd, gobj);
> if (ret) {
> DRM_ERROR("failed to initialize framebuffer %d\n", ret);
> goto out;
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> index 319cb19e1b99f..cb0b581bbce7b 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> @@ -602,6 +602,14 @@ int amdgpu_display_get_crtc_scanoutpos(struct drm_device *dev,
> int *hpos, ktime_t *stime, ktime_t *etime,
> const struct drm_display_mode *mode);
>
> +int amdgpu_display_gem_fb_init(struct drm_device *dev,
> + struct amdgpu_framebuffer *rfb,
> + const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj);
> +int amdgpu_display_gem_fb_verify_and_init(
> + struct drm_device *dev, struct amdgpu_framebuffer *rfb,
> + struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj);
> int amdgpu_display_framebuffer_init(struct drm_device *dev,
> struct amdgpu_framebuffer *rfb,
> const struct drm_mode_fb_cmd2 *mode_cmd,
> --
> 2.30.1.766.gb4fecdf3b7-goog
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Alex Deucher <alexdeucher@gmail.com>
To: Mark Yacoub <markyacoub@chromium.org>
Cc: Maling list - DRI developers <dri-devel@lists.freedesktop.org>,
Sean Paul <seanpaul@chromium.org>,
amd-gfx list <amd-gfx@lists.freedesktop.org>,
"Deucher, Alexander" <alexander.deucher@amd.com>,
Christian Koenig <christian.koenig@amd.com>,
Mark Yacoub <markyacoub@google.com>
Subject: Re: [PATCH] drm/amdgpu: Verify bo size can fit framebuffer size on init.
Date: Mon, 8 Mar 2021 16:20:51 -0500 [thread overview]
Message-ID: <CADnq5_N9MEuvpXKAX8aU-6--Etb=a7+20qMdDsgXJWKa_7GsLg@mail.gmail.com> (raw)
In-Reply-To: <20210304191534.1542241-1-markyacoub@chromium.org>
On Thu, Mar 4, 2021 at 2:15 PM Mark Yacoub <markyacoub@chromium.org> wrote:
>
> From: Mark Yacoub <markyacoub@google.com>
>
> To initialize the framebuffer, use drm_gem_fb_init_with_funcs which
> verifies that the BO size can fit the FB size by calculating the minimum
> expected size of each plane.
>
> The bug was caught using igt-gpu-tools test: kms_addfb_basic.too-high
> and kms_addfb_basic.bo-too-small
>
> Tested on ChromeOS Zork by turning on the display and running a YT
> video.
>
> Cc: Alex Deucher <alexander.deucher@amd.com>
> Cc: "Christian König" <christian.koenig@amd.com>
> Cc: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Thanks for the patch. Just a few minor comments below.
Alex
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 66 ++++++++++++++++-----
> drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 4 +-
> drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h | 8 +++
> 3 files changed, 62 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
> index 48cb33e5b3826..554038e5bbf6a 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
> @@ -870,18 +870,59 @@ static int amdgpu_display_get_fb_info(const struct amdgpu_framebuffer *amdgpu_fb
> return r;
> }
>
> -int amdgpu_display_framebuffer_init(struct drm_device *dev,
> - struct amdgpu_framebuffer *rfb,
> - const struct drm_mode_fb_cmd2 *mode_cmd,
> - struct drm_gem_object *obj)
> +int amdgpu_display_gem_fb_init(struct drm_device *dev,
> + struct amdgpu_framebuffer *rfb,
> + const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj)
> {
> - int ret, i;
> + int ret;
Please add a new line here.
> rfb->base.obj[0] = obj;
> drm_helper_mode_fill_fb_struct(dev, &rfb->base, mode_cmd);
> ret = drm_framebuffer_init(dev, &rfb->base, &amdgpu_fb_funcs);
> if (ret)
> - goto fail;
> + goto err;
> +
> + ret = amdgpu_display_framebuffer_init(dev, rfb, mode_cmd, obj);
> + if (ret)
> + goto err;
> +
> + return 0;
> +err:
> + drm_err(dev, "Failed to init gem fb: %d\n", ret);
> + rfb->base.obj[0] = NULL;
> + return ret;
> +}
> +
> +int amdgpu_display_gem_fb_verify_and_init(
> + struct drm_device *dev, struct amdgpu_framebuffer *rfb,
> + struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj)
> +{
> + int ret;
> + rfb->base.obj[0] = obj;
> + // Verify that bo size can fit the fb size.
Please change this to use C style comments.
> + ret = drm_gem_fb_init_with_funcs(dev, &rfb->base, file_priv, mode_cmd,
> + &amdgpu_fb_funcs);
> + if (ret)
> + goto err;
>
> + ret = amdgpu_display_framebuffer_init(dev, rfb, mode_cmd, obj);
> + if (ret)
> + goto err;
> +
> + return 0;
> +err:
> + drm_err(dev, "Failed to verify and init gem fb: %d\n", ret);
> + rfb->base.obj[0] = NULL;
> + return ret;
> +}
> +
> +int amdgpu_display_framebuffer_init(struct drm_device *dev,
> + struct amdgpu_framebuffer *rfb,
> + const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj)
> +{
> + int ret, i;
New line here.
> /*
> * This needs to happen before modifier conversion as that might change
> * the number of planes.
> @@ -891,13 +932,13 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev,
> drm_dbg_kms(dev, "Plane 0 and %d have different BOs: %u vs. %u\n",
> i, mode_cmd->handles[0], mode_cmd->handles[i]);
> ret = -EINVAL;
> - goto fail;
> + return ret;
> }
> }
>
> ret = amdgpu_display_get_fb_info(rfb, &rfb->tiling_flags, &rfb->tmz_surface);
> if (ret)
> - goto fail;
> + return ret;
>
> if (dev->mode_config.allow_fb_modifiers &&
> !(rfb->base.flags & DRM_MODE_FB_MODIFIERS)) {
> @@ -905,7 +946,7 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev,
> if (ret) {
> drm_dbg_kms(dev, "Failed to convert tiling flags 0x%llX to a modifier",
> rfb->tiling_flags);
> - goto fail;
> + return ret;
> }
> }
>
> @@ -915,10 +956,6 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev,
> }
>
> return 0;
> -
> -fail:
> - rfb->base.obj[0] = NULL;
> - return ret;
> }
>
> struct drm_framebuffer *
> @@ -953,7 +990,8 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
> return ERR_PTR(-ENOMEM);
> }
>
> - ret = amdgpu_display_framebuffer_init(dev, amdgpu_fb, mode_cmd, obj);
> + ret = amdgpu_display_gem_fb_verify_and_init(dev, amdgpu_fb, file_priv,
> + mode_cmd, obj);
> if (ret) {
> kfree(amdgpu_fb);
> drm_gem_object_put(obj);
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
> index 0bf7d36c6686d..22157bd7017c9 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
> @@ -232,8 +232,8 @@ static int amdgpufb_create(struct drm_fb_helper *helper,
> goto out;
> }
>
> - ret = amdgpu_display_framebuffer_init(adev_to_drm(adev), &rfbdev->rfb,
> - &mode_cmd, gobj);
> + ret = amdgpu_display_gem_fb_init(adev_to_drm(adev), &rfbdev->rfb,
> + &mode_cmd, gobj);
> if (ret) {
> DRM_ERROR("failed to initialize framebuffer %d\n", ret);
> goto out;
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> index 319cb19e1b99f..cb0b581bbce7b 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> @@ -602,6 +602,14 @@ int amdgpu_display_get_crtc_scanoutpos(struct drm_device *dev,
> int *hpos, ktime_t *stime, ktime_t *etime,
> const struct drm_display_mode *mode);
>
> +int amdgpu_display_gem_fb_init(struct drm_device *dev,
> + struct amdgpu_framebuffer *rfb,
> + const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj);
> +int amdgpu_display_gem_fb_verify_and_init(
> + struct drm_device *dev, struct amdgpu_framebuffer *rfb,
> + struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd,
> + struct drm_gem_object *obj);
> int amdgpu_display_framebuffer_init(struct drm_device *dev,
> struct amdgpu_framebuffer *rfb,
> const struct drm_mode_fb_cmd2 *mode_cmd,
> --
> 2.30.1.766.gb4fecdf3b7-goog
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next prev parent reply other threads:[~2021-03-08 21:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-04 19:15 [PATCH] drm/amdgpu: Verify bo size can fit framebuffer size on init Mark Yacoub
2021-03-04 19:15 ` Mark Yacoub
2021-03-08 21:20 ` Alex Deucher [this message]
2021-03-08 21:20 ` Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CADnq5_N9MEuvpXKAX8aU-6--Etb=a7+20qMdDsgXJWKa_7GsLg@mail.gmail.com' \
--to=alexdeucher@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=markyacoub@chromium.org \
--cc=markyacoub@google.com \
--cc=seanpaul@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.