From: Chen-Yu Tsai <wens@csie.org>
To: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
devicetree <devicetree@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Shuge <shuge@allwinnertech.com>,
Meng Zhang <kevin@allwinnertech.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>
Subject: Re: [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support
Date: Wed, 8 Oct 2014 21:41:18 +0800 [thread overview]
Message-ID: <CAGb2v65bPWvcs8CkOVgUhRRfhU6dz=WDt98wRMAjD+Hb3wbk8A@mail.gmail.com> (raw)
In-Reply-To: <54353CE5.5070808@gmail.com>
On Wed, Oct 8, 2014 at 9:32 PM, Dinh Nguyen <dinh.linux@gmail.com> wrote:
>
>
> On 10/8/14, 8:02 AM, Chen-Yu Tsai wrote:
>> The A80 Optimus Board is was launched with the Allwinner A80 SoC.
>> It was jointly developed by Allwinner and Merrii.
>>
>> This board has a UART port, a JTAG connector, USB host ports, a USB
>> 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
>> 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
>> jack, IR receiver, and additional GPIO headers.
>>
>> This patch adds only basic support.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++
>> 2 files changed, 68 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts
>>
> [...]
>> +
>> +/dts-v1/;
>> +/include/ "sun9i-a80.dtsi"
>> +
>> +/ {
>> + model = "Merrii A80 Optimus Board";
>> + compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
>
> "merrii" should be added to vendor-prefixes.txt
A patch for that was already queued by Maxime.
ChenYu
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
linux-arm-kernel
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-kernel
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Shuge <shuge-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org>,
Meng Zhang
<kevin-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org>,
Gregory CLEMENT
<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Subject: Re: [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support
Date: Wed, 8 Oct 2014 21:41:18 +0800 [thread overview]
Message-ID: <CAGb2v65bPWvcs8CkOVgUhRRfhU6dz=WDt98wRMAjD+Hb3wbk8A@mail.gmail.com> (raw)
In-Reply-To: <54353CE5.5070808-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Wed, Oct 8, 2014 at 9:32 PM, Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
>
> On 10/8/14, 8:02 AM, Chen-Yu Tsai wrote:
>> The A80 Optimus Board is was launched with the Allwinner A80 SoC.
>> It was jointly developed by Allwinner and Merrii.
>>
>> This board has a UART port, a JTAG connector, USB host ports, a USB
>> 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
>> 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
>> jack, IR receiver, and additional GPIO headers.
>>
>> This patch adds only basic support.
>>
>> Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
>> ---
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++
>> 2 files changed, 68 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts
>>
> [...]
>> +
>> +/dts-v1/;
>> +/include/ "sun9i-a80.dtsi"
>> +
>> +/ {
>> + model = "Merrii A80 Optimus Board";
>> + compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
>
> "merrii" should be added to vendor-prefixes.txt
A patch for that was already queued by Maxime.
ChenYu
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support
Date: Wed, 8 Oct 2014 21:41:18 +0800 [thread overview]
Message-ID: <CAGb2v65bPWvcs8CkOVgUhRRfhU6dz=WDt98wRMAjD+Hb3wbk8A@mail.gmail.com> (raw)
In-Reply-To: <54353CE5.5070808@gmail.com>
On Wed, Oct 8, 2014 at 9:32 PM, Dinh Nguyen <dinh.linux@gmail.com> wrote:
>
>
> On 10/8/14, 8:02 AM, Chen-Yu Tsai wrote:
>> The A80 Optimus Board is was launched with the Allwinner A80 SoC.
>> It was jointly developed by Allwinner and Merrii.
>>
>> This board has a UART port, a JTAG connector, USB host ports, a USB
>> 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
>> 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
>> jack, IR receiver, and additional GPIO headers.
>>
>> This patch adds only basic support.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++
>> 2 files changed, 68 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts
>>
> [...]
>> +
>> +/dts-v1/;
>> +/include/ "sun9i-a80.dtsi"
>> +
>> +/ {
>> + model = "Merrii A80 Optimus Board";
>> + compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
>
> "merrii" should be added to vendor-prefixes.txt
A patch for that was already queued by Maxime.
ChenYu
next prev parent reply other threads:[~2014-10-08 13:41 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-08 13:02 [PATCH v3 0/5] ARM: sunxi: Add basic support for Allwinner A80 SoC Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-10-08 13:02 ` [PATCH v3 1/5] ARM: sunxi: Introduce Allwinner A80 support Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-10-08 13:02 ` [PATCH v3 2/5] ARM: dts: sunxi: Add Allwinner A80 dtsi Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-12-31 0:37 ` ARM: dts: sun9i: Allwinner A80 dtsi - missing clock-frequency property Heinrich Schuchardt
2014-12-31 0:37 ` Heinrich Schuchardt
2014-12-31 3:18 ` Chen-Yu Tsai
2014-12-31 3:18 ` Chen-Yu Tsai
2014-12-31 3:18 ` Chen-Yu Tsai
2014-10-08 13:02 ` [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-10-08 13:32 ` Dinh Nguyen
2014-10-08 13:32 ` Dinh Nguyen
2014-10-08 13:32 ` Dinh Nguyen
2014-10-08 13:41 ` Chen-Yu Tsai [this message]
2014-10-08 13:41 ` Chen-Yu Tsai
2014-10-08 13:41 ` Chen-Yu Tsai
2014-10-08 13:02 ` [PATCH v3 4/5] devicetree: bindings: Document supported Allwinner sunxi SoCs Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-10-08 13:02 ` [PATCH v3 5/5] Documentation: sunxi: Add A80 datasheet link Chen-Yu Tsai
2014-10-08 13:02 ` Chen-Yu Tsai
2014-10-09 2:54 ` [PATCH v3 0/5] ARM: sunxi: Add basic support for Allwinner A80 SoC Andreas Färber
2014-10-09 2:54 ` Andreas Färber
2014-10-10 18:30 ` Maxime Ripard
2014-10-10 18:30 ` Maxime Ripard
2014-10-10 18:30 ` Maxime Ripard
2014-10-10 18:26 ` Maxime Ripard
2014-10-10 18:26 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGb2v65bPWvcs8CkOVgUhRRfhU6dz=WDt98wRMAjD+Hb3wbk8A@mail.gmail.com' \
--to=wens@csie.org \
--cc=devicetree@vger.kernel.org \
--cc=dinh.linux@gmail.com \
--cc=galak@codeaurora.org \
--cc=gregory.clement@free-electrons.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kevin@allwinnertech.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=shuge@allwinnertech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.