From: Barry Song <baohua@kernel.org>
To: Arnd Bergmann <arnd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
LKML <linux-kernel@vger.kernel.org>,
Arnd Bergmann <arnd@arndb.de>
Subject: Re: [PATCH] Input: remove sirfsoc power button driver
Date: Thu, 21 Jan 2021 10:23:00 +1300 [thread overview]
Message-ID: <CAGsJ_4zaAi1RX0JPYngXKckCsC7Mznyp7H_M=kgi+qKiWgGE5Q@mail.gmail.com> (raw)
In-Reply-To: <20210120133057.2470873-1-arnd@kernel.org>
Arnd Bergmann <arnd@kernel.org> 于2021年1月21日周四 上午2:31写道：
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> The CSR SiRF prima2/atlas platforms are getting removed, so this driver
> is no longer needed.
>
> Cc: Barry Song <baohua@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
> ---
> drivers/input/misc/Kconfig | 10 --
> drivers/input/misc/Makefile | 1 -
> drivers/input/misc/sirfsoc-onkey.c | 207 -----------------------------
> 3 files changed, 218 deletions(-)
> delete mode 100644 drivers/input/misc/sirfsoc-onkey.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index ad1b6c90bc4d..f824e3435a8e 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -789,16 +789,6 @@ config INPUT_XEN_KBDDEV_FRONTEND
> To compile this driver as a module, choose M here: the
> module will be called xen-kbdfront.
>
> -config INPUT_SIRFSOC_ONKEY
> - tristate "CSR SiRFSoC power on/off/suspend key support"
> - depends on ARCH_SIRF && OF
> - default y
> - help
> - Say Y here if you want to support for the SiRFSoC power on/off/suspend key
> - in Linux, after you press the onkey, system will suspend.
> -
> - If unsure, say N.
> -
> config INPUT_IDEAPAD_SLIDEBAR
> tristate "IdeaPad Laptop Slidebar"
> depends on INPUT
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 7f202ba8f775..0b5871e1bb76 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -72,7 +72,6 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
> obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
> obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
> obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
> -obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
> obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
> obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
> obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o
> diff --git a/drivers/input/misc/sirfsoc-onkey.c b/drivers/input/misc/sirfsoc-onkey.c
> deleted file mode 100644
> index 7982bf8fb839..000000000000
> --- a/drivers/input/misc/sirfsoc-onkey.c
> +++ /dev/null
> @@ -1,207 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * Power key driver for SiRF PrimaII
> - *
> - * Copyright (c) 2013 - 2014 Cambridge Silicon Radio Limited, a CSR plc group
> - * company.
> - */
> -
> -#include <linux/module.h>
> -#include <linux/interrupt.h>
> -#include <linux/delay.h>
> -#include <linux/platform_device.h>
> -#include <linux/input.h>
> -#include <linux/rtc/sirfsoc_rtciobrg.h>
> -#include <linux/of.h>
> -#include <linux/workqueue.h>
> -
> -struct sirfsoc_pwrc_drvdata {
> - u32 pwrc_base;
> - struct input_dev *input;
> - struct delayed_work work;
> -};
> -
> -#define PWRC_ON_KEY_BIT (1 << 0)
> -
> -#define PWRC_INT_STATUS 0xc
> -#define PWRC_INT_MASK 0x10
> -#define PWRC_PIN_STATUS 0x14
> -#define PWRC_KEY_DETECT_UP_TIME 20 /* ms*/
> -
> -static int sirfsoc_pwrc_is_on_key_down(struct sirfsoc_pwrc_drvdata *pwrcdrv)
> -{
> - u32 state = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
> - PWRC_PIN_STATUS);
> - return !(state & PWRC_ON_KEY_BIT); /* ON_KEY is active low */
> -}
> -
> -static void sirfsoc_pwrc_report_event(struct work_struct *work)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv =
> - container_of(work, struct sirfsoc_pwrc_drvdata, work.work);
> -
> - if (sirfsoc_pwrc_is_on_key_down(pwrcdrv)) {
> - schedule_delayed_work(&pwrcdrv->work,
> - msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
> - } else {
> - input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 0);
> - input_sync(pwrcdrv->input);
> - }
> -}
> -
> -static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id;
> - u32 int_status;
> -
> - int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
> - PWRC_INT_STATUS);
> - sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT,
> - pwrcdrv->pwrc_base + PWRC_INT_STATUS);
> -
> - input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 1);
> - input_sync(pwrcdrv->input);
> - schedule_delayed_work(&pwrcdrv->work,
> - msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
> -
> - return IRQ_HANDLED;
> -}
> -
> -static void sirfsoc_pwrc_toggle_interrupts(struct sirfsoc_pwrc_drvdata *pwrcdrv,
> - bool enable)
> -{
> - u32 int_mask;
> -
> - int_mask = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK);
> - if (enable)
> - int_mask |= PWRC_ON_KEY_BIT;
> - else
> - int_mask &= ~PWRC_ON_KEY_BIT;
> - sirfsoc_rtc_iobrg_writel(int_mask, pwrcdrv->pwrc_base + PWRC_INT_MASK);
> -}
> -
> -static int sirfsoc_pwrc_open(struct input_dev *input)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
> -
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
> -
> - return 0;
> -}
> -
> -static void sirfsoc_pwrc_close(struct input_dev *input)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
> -
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
> - cancel_delayed_work_sync(&pwrcdrv->work);
> -}
> -
> -static const struct of_device_id sirfsoc_pwrc_of_match[] = {
> - { .compatible = "sirf,prima2-pwrc" },
> - {},
> -};
> -MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match);
> -
> -static int sirfsoc_pwrc_probe(struct platform_device *pdev)
> -{
> - struct device_node *np = pdev->dev.of_node;
> - struct sirfsoc_pwrc_drvdata *pwrcdrv;
> - int irq;
> - int error;
> -
> - pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata),
> - GFP_KERNEL);
> - if (!pwrcdrv) {
> - dev_info(&pdev->dev, "Not enough memory for the device data\n");
> - return -ENOMEM;
> - }
> -
> - /*
> - * We can't use of_iomap because pwrc is not mapped in memory,
> - * the so-called base address is only offset in rtciobrg
> - */
> - error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base);
> - if (error) {
> - dev_err(&pdev->dev,
> - "unable to find base address of pwrc node in dtb\n");
> - return error;
> - }
> -
> - pwrcdrv->input = devm_input_allocate_device(&pdev->dev);
> - if (!pwrcdrv->input)
> - return -ENOMEM;
> -
> - pwrcdrv->input->name = "sirfsoc pwrckey";
> - pwrcdrv->input->phys = "pwrc/input0";
> - pwrcdrv->input->evbit[0] = BIT_MASK(EV_KEY);
> - input_set_capability(pwrcdrv->input, EV_KEY, KEY_POWER);
> -
> - INIT_DELAYED_WORK(&pwrcdrv->work, sirfsoc_pwrc_report_event);
> -
> - pwrcdrv->input->open = sirfsoc_pwrc_open;
> - pwrcdrv->input->close = sirfsoc_pwrc_close;
> -
> - input_set_drvdata(pwrcdrv->input, pwrcdrv);
> -
> - /* Make sure the device is quiesced */
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
> -
> - irq = platform_get_irq(pdev, 0);
> - error = devm_request_irq(&pdev->dev, irq,
> - sirfsoc_pwrc_isr, 0,
> - "sirfsoc_pwrc_int", pwrcdrv);
> - if (error) {
> - dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n",
> - irq, error);
> - return error;
> - }
> -
> - error = input_register_device(pwrcdrv->input);
> - if (error) {
> - dev_err(&pdev->dev,
> - "unable to register input device, error: %d\n",
> - error);
> - return error;
> - }
> -
> - dev_set_drvdata(&pdev->dev, pwrcdrv);
> - device_init_wakeup(&pdev->dev, 1);
> -
> - return 0;
> -}
> -
> -static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
> - struct input_dev *input = pwrcdrv->input;
> -
> - /*
> - * Do not mask pwrc interrupt as we want pwrc work as a wakeup source
> - * if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c
> - */
> - mutex_lock(&input->mutex);
> - if (input_device_enabled(input))
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
> - mutex_unlock(&input->mutex);
> -
> - return 0;
> -}
> -
> -static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);
> -
> -static struct platform_driver sirfsoc_pwrc_driver = {
> - .probe = sirfsoc_pwrc_probe,
> - .driver = {
> - .name = "sirfsoc-pwrc",
> - .pm = &sirfsoc_pwrc_pm_ops,
> - .of_match_table = sirfsoc_pwrc_of_match,
> - }
> -};
> -
> -module_platform_driver(sirfsoc_pwrc_driver);
> -
> -MODULE_LICENSE("GPL v2");
> -MODULE_AUTHOR("Binghua Duan <Binghua.Duan@csr.com>, Xianglong Du <Xianglong.Du@csr.com>");
> -MODULE_DESCRIPTION("CSR Prima2 PWRC Driver");
> -MODULE_ALIAS("platform:sirfsoc-pwrc");
> --
> 2.29.2
>
WARNING: multiple messages have this Message-ID (diff)
From: Barry Song <baohua@kernel.org>
To: Arnd Bergmann <arnd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
LKML <linux-kernel@vger.kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] Input: remove sirfsoc power button driver
Date: Thu, 21 Jan 2021 10:23:00 +1300 [thread overview]
Message-ID: <CAGsJ_4zaAi1RX0JPYngXKckCsC7Mznyp7H_M=kgi+qKiWgGE5Q@mail.gmail.com> (raw)
In-Reply-To: <20210120133057.2470873-1-arnd@kernel.org>
Arnd Bergmann <arnd@kernel.org> 于2021年1月21日周四 上午2:31写道：
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> The CSR SiRF prima2/atlas platforms are getting removed, so this driver
> is no longer needed.
>
> Cc: Barry Song <baohua@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
> ---
> drivers/input/misc/Kconfig | 10 --
> drivers/input/misc/Makefile | 1 -
> drivers/input/misc/sirfsoc-onkey.c | 207 -----------------------------
> 3 files changed, 218 deletions(-)
> delete mode 100644 drivers/input/misc/sirfsoc-onkey.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index ad1b6c90bc4d..f824e3435a8e 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -789,16 +789,6 @@ config INPUT_XEN_KBDDEV_FRONTEND
> To compile this driver as a module, choose M here: the
> module will be called xen-kbdfront.
>
> -config INPUT_SIRFSOC_ONKEY
> - tristate "CSR SiRFSoC power on/off/suspend key support"
> - depends on ARCH_SIRF && OF
> - default y
> - help
> - Say Y here if you want to support for the SiRFSoC power on/off/suspend key
> - in Linux, after you press the onkey, system will suspend.
> -
> - If unsure, say N.
> -
> config INPUT_IDEAPAD_SLIDEBAR
> tristate "IdeaPad Laptop Slidebar"
> depends on INPUT
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 7f202ba8f775..0b5871e1bb76 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -72,7 +72,6 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
> obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
> obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
> obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
> -obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
> obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
> obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
> obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o
> diff --git a/drivers/input/misc/sirfsoc-onkey.c b/drivers/input/misc/sirfsoc-onkey.c
> deleted file mode 100644
> index 7982bf8fb839..000000000000
> --- a/drivers/input/misc/sirfsoc-onkey.c
> +++ /dev/null
> @@ -1,207 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * Power key driver for SiRF PrimaII
> - *
> - * Copyright (c) 2013 - 2014 Cambridge Silicon Radio Limited, a CSR plc group
> - * company.
> - */
> -
> -#include <linux/module.h>
> -#include <linux/interrupt.h>
> -#include <linux/delay.h>
> -#include <linux/platform_device.h>
> -#include <linux/input.h>
> -#include <linux/rtc/sirfsoc_rtciobrg.h>
> -#include <linux/of.h>
> -#include <linux/workqueue.h>
> -
> -struct sirfsoc_pwrc_drvdata {
> - u32 pwrc_base;
> - struct input_dev *input;
> - struct delayed_work work;
> -};
> -
> -#define PWRC_ON_KEY_BIT (1 << 0)
> -
> -#define PWRC_INT_STATUS 0xc
> -#define PWRC_INT_MASK 0x10
> -#define PWRC_PIN_STATUS 0x14
> -#define PWRC_KEY_DETECT_UP_TIME 20 /* ms*/
> -
> -static int sirfsoc_pwrc_is_on_key_down(struct sirfsoc_pwrc_drvdata *pwrcdrv)
> -{
> - u32 state = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
> - PWRC_PIN_STATUS);
> - return !(state & PWRC_ON_KEY_BIT); /* ON_KEY is active low */
> -}
> -
> -static void sirfsoc_pwrc_report_event(struct work_struct *work)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv =
> - container_of(work, struct sirfsoc_pwrc_drvdata, work.work);
> -
> - if (sirfsoc_pwrc_is_on_key_down(pwrcdrv)) {
> - schedule_delayed_work(&pwrcdrv->work,
> - msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
> - } else {
> - input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 0);
> - input_sync(pwrcdrv->input);
> - }
> -}
> -
> -static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id;
> - u32 int_status;
> -
> - int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
> - PWRC_INT_STATUS);
> - sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT,
> - pwrcdrv->pwrc_base + PWRC_INT_STATUS);
> -
> - input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 1);
> - input_sync(pwrcdrv->input);
> - schedule_delayed_work(&pwrcdrv->work,
> - msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
> -
> - return IRQ_HANDLED;
> -}
> -
> -static void sirfsoc_pwrc_toggle_interrupts(struct sirfsoc_pwrc_drvdata *pwrcdrv,
> - bool enable)
> -{
> - u32 int_mask;
> -
> - int_mask = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK);
> - if (enable)
> - int_mask |= PWRC_ON_KEY_BIT;
> - else
> - int_mask &= ~PWRC_ON_KEY_BIT;
> - sirfsoc_rtc_iobrg_writel(int_mask, pwrcdrv->pwrc_base + PWRC_INT_MASK);
> -}
> -
> -static int sirfsoc_pwrc_open(struct input_dev *input)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
> -
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
> -
> - return 0;
> -}
> -
> -static void sirfsoc_pwrc_close(struct input_dev *input)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
> -
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
> - cancel_delayed_work_sync(&pwrcdrv->work);
> -}
> -
> -static const struct of_device_id sirfsoc_pwrc_of_match[] = {
> - { .compatible = "sirf,prima2-pwrc" },
> - {},
> -};
> -MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match);
> -
> -static int sirfsoc_pwrc_probe(struct platform_device *pdev)
> -{
> - struct device_node *np = pdev->dev.of_node;
> - struct sirfsoc_pwrc_drvdata *pwrcdrv;
> - int irq;
> - int error;
> -
> - pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata),
> - GFP_KERNEL);
> - if (!pwrcdrv) {
> - dev_info(&pdev->dev, "Not enough memory for the device data\n");
> - return -ENOMEM;
> - }
> -
> - /*
> - * We can't use of_iomap because pwrc is not mapped in memory,
> - * the so-called base address is only offset in rtciobrg
> - */
> - error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base);
> - if (error) {
> - dev_err(&pdev->dev,
> - "unable to find base address of pwrc node in dtb\n");
> - return error;
> - }
> -
> - pwrcdrv->input = devm_input_allocate_device(&pdev->dev);
> - if (!pwrcdrv->input)
> - return -ENOMEM;
> -
> - pwrcdrv->input->name = "sirfsoc pwrckey";
> - pwrcdrv->input->phys = "pwrc/input0";
> - pwrcdrv->input->evbit[0] = BIT_MASK(EV_KEY);
> - input_set_capability(pwrcdrv->input, EV_KEY, KEY_POWER);
> -
> - INIT_DELAYED_WORK(&pwrcdrv->work, sirfsoc_pwrc_report_event);
> -
> - pwrcdrv->input->open = sirfsoc_pwrc_open;
> - pwrcdrv->input->close = sirfsoc_pwrc_close;
> -
> - input_set_drvdata(pwrcdrv->input, pwrcdrv);
> -
> - /* Make sure the device is quiesced */
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
> -
> - irq = platform_get_irq(pdev, 0);
> - error = devm_request_irq(&pdev->dev, irq,
> - sirfsoc_pwrc_isr, 0,
> - "sirfsoc_pwrc_int", pwrcdrv);
> - if (error) {
> - dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n",
> - irq, error);
> - return error;
> - }
> -
> - error = input_register_device(pwrcdrv->input);
> - if (error) {
> - dev_err(&pdev->dev,
> - "unable to register input device, error: %d\n",
> - error);
> - return error;
> - }
> -
> - dev_set_drvdata(&pdev->dev, pwrcdrv);
> - device_init_wakeup(&pdev->dev, 1);
> -
> - return 0;
> -}
> -
> -static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
> -{
> - struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
> - struct input_dev *input = pwrcdrv->input;
> -
> - /*
> - * Do not mask pwrc interrupt as we want pwrc work as a wakeup source
> - * if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c
> - */
> - mutex_lock(&input->mutex);
> - if (input_device_enabled(input))
> - sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
> - mutex_unlock(&input->mutex);
> -
> - return 0;
> -}
> -
> -static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);
> -
> -static struct platform_driver sirfsoc_pwrc_driver = {
> - .probe = sirfsoc_pwrc_probe,
> - .driver = {
> - .name = "sirfsoc-pwrc",
> - .pm = &sirfsoc_pwrc_pm_ops,
> - .of_match_table = sirfsoc_pwrc_of_match,
> - }
> -};
> -
> -module_platform_driver(sirfsoc_pwrc_driver);
> -
> -MODULE_LICENSE("GPL v2");
> -MODULE_AUTHOR("Binghua Duan <Binghua.Duan@csr.com>, Xianglong Du <Xianglong.Du@csr.com>");
> -MODULE_DESCRIPTION("CSR Prima2 PWRC Driver");
> -MODULE_ALIAS("platform:sirfsoc-pwrc");
> --
> 2.29.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-20 22:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-20 13:30 [PATCH] Input: remove sirfsoc power button driver Arnd Bergmann
2021-01-20 13:30 ` Arnd Bergmann
2021-01-20 21:23 ` Barry Song [this message]
2021-01-20 21:23 ` Barry Song
2021-01-20 14:16 Arnd Bergmann
2021-01-20 14:16 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGsJ_4zaAi1RX0JPYngXKckCsC7Mznyp7H_M=kgi+qKiWgGE5Q@mail.gmail.com' \
--to=baohua@kernel.org \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.