All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yang Shi <shy828301@gmail.com>
To: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>, Kirill Tkhai <ktkhai@virtuozzo.com>,
	Shakeel Butt <shakeelb@google.com>,
	Dave Chinner <david@fromorbit.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Michal Hocko <mhocko@suse.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linux MM <linux-mm@kvack.org>,
	Linux FS-devel Mailing List <linux-fsdevel@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [v5 PATCH 09/11] mm: vmscan: don't need allocate shrinker->nr_deferred for memcg aware shrinkers
Date: Fri, 29 Jan 2021 09:34:29 -0800	[thread overview]
Message-ID: <CAHbLzkocuf94V4eegX2G=7GS=Q1Vbt8xrbs-8ASeYjNQfceOQQ@mail.gmail.com> (raw)
In-Reply-To: <a519ccbd-7fae-ae8a-9900-bd49a758b5c8@suse.cz>

On Fri, Jan 29, 2021 at 7:40 AM Vlastimil Babka <vbabka@suse.cz> wrote:
>
> On 1/28/21 12:33 AM, Yang Shi wrote:
> > Now nr_deferred is available on per memcg level for memcg aware shrinkers, so don't need
> > allocate shrinker->nr_deferred for such shrinkers anymore.
> >
> > The prealloc_memcg_shrinker() would return -ENOSYS if !CONFIG_MEMCG or memcg is disabled
> > by kernel command line, then shrinker's SHRINKER_MEMCG_AWARE flag would be cleared.
> > This makes the implementation of this patch simpler.
> >
> > Signed-off-by: Yang Shi <shy828301@gmail.com>
>
> Acked-by: Vlastimil Babka <vbabka@suse.cz>
>
> > @@ -525,8 +528,20 @@ unsigned long lruvec_lru_size(struct lruvec *lruvec, enum lru_list lru, int zone
> >   */
> >  int prealloc_shrinker(struct shrinker *shrinker)
> >  {
> > -     unsigned int size = sizeof(*shrinker->nr_deferred);
> > +     unsigned int size;
> > +     int err;
> > +
> > +     if (shrinker->flags & SHRINKER_MEMCG_AWARE) {
> > +             err = prealloc_memcg_shrinker(shrinker);
> > +             if (!err)
> > +                     return 0;
>
> Nit: this err == 0 case is covered below:

Aha, thanks. Will fix in v6.

>
> > +             if (err != -ENOSYS)
> > +                     return err;
> > +
> > +             shrinker->flags &= ~SHRINKER_MEMCG_AWARE;
> > +     }
> >
> > +     size = sizeof(*shrinker->nr_deferred);
> >       if (shrinker->flags & SHRINKER_NUMA_AWARE)
> >               size *= nr_node_ids;
> >

  reply	other threads:[~2021-01-29 17:40 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-27 23:33 [v5 PATCH 0/11] Make shrinker's nr_deferred memcg aware Yang Shi
2021-01-27 23:33 ` [v5 PATCH 01/11] mm: vmscan: use nid from shrink_control for tracepoint Yang Shi
2021-01-28 16:02   ` Vlastimil Babka
2021-01-27 23:33 ` [v5 PATCH 02/11] mm: vmscan: consolidate shrinker_maps handling code Yang Shi
2021-01-28 16:10   ` Vlastimil Babka
2021-01-28 21:16     ` Yang Shi
2021-01-28 21:16       ` Yang Shi
2021-01-29 14:33   ` Kirill Tkhai
2021-01-29 17:11     ` Yang Shi
2021-01-29 17:11       ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 03/11] mm: vmscan: use shrinker_rwsem to protect shrinker_maps allocation Yang Shi
2021-01-28 16:19   ` Vlastimil Babka
2021-01-27 23:33 ` [v5 PATCH 04/11] mm: vmscan: remove memcg_shrinker_map_size Yang Shi
2021-01-28 16:53   ` Vlastimil Babka
2021-01-28 21:22     ` Yang Shi
2021-01-28 21:22       ` Yang Shi
2021-01-29 11:22       ` Vlastimil Babka
2021-01-29 17:05         ` Yang Shi
2021-01-29 17:05           ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 05/11] mm: memcontrol: rename shrinker_map to shrinker_info Yang Shi
2021-01-28 17:38   ` Vlastimil Babka
2021-01-28 22:05     ` Yang Shi
2021-01-28 22:05       ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 06/11] mm: vmscan: use a new flag to indicate shrinker is registered Yang Shi
2021-01-28 17:56   ` Vlastimil Babka
2021-01-28 23:47     ` Yang Shi
2021-01-28 23:47       ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 07/11] mm: vmscan: add per memcg shrinker nr_deferred Yang Shi
2021-01-29 13:00   ` Vlastimil Babka
2021-01-29 14:46     ` Kirill Tkhai
2021-01-29 17:20     ` Yang Shi
2021-01-29 17:20       ` Yang Shi
2021-01-29 18:04       ` Yang Shi
2021-01-29 18:04         ` Yang Shi
2021-02-01 15:17         ` Vlastimil Babka
2021-02-01 17:09           ` Yang Shi
2021-02-01 17:09             ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 08/11] mm: vmscan: use per memcg nr_deferred of shrinker Yang Shi
2021-01-29 14:55   ` Kirill Tkhai
2021-01-29 14:59     ` Kirill Tkhai
2021-01-29 17:22       ` Yang Shi
2021-01-29 17:22         ` Yang Shi
2021-01-29 15:13   ` Vlastimil Babka
2021-01-29 17:33     ` Yang Shi
2021-01-29 17:33       ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 09/11] mm: vmscan: don't need allocate shrinker->nr_deferred for memcg aware shrinkers Yang Shi
2021-01-29 15:40   ` Vlastimil Babka
2021-01-29 17:34     ` Yang Shi [this message]
2021-01-29 17:34       ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 10/11] mm: memcontrol: reparent nr_deferred when memcg offline Yang Shi
2021-01-29 15:52   ` Vlastimil Babka
2021-01-29 17:38     ` Yang Shi
2021-01-29 17:38       ` Yang Shi
2021-01-27 23:33 ` [v5 PATCH 11/11] mm: vmscan: shrink deferred objects proportional to priority Yang Shi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHbLzkocuf94V4eegX2G=7GS=Q1Vbt8xrbs-8ASeYjNQfceOQQ@mail.gmail.com' \
    --to=shy828301@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=david@fromorbit.com \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=ktkhai@virtuozzo.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=shakeelb@google.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.