From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Arnd Bergmann <arnd@arndb.de>
Cc: soc@kernel.org, Vladimir Zapolskiy <vz@mleia.com>,
Sylvain Lemieux <slemieux.tyco@gmail.com>,
arm-soc <linux-arm-kernel@lists.infradead.org>,
LKML <linux-kernel@vger.kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH v2 05/13] gpio: lpc32xx: allow building on non-lpc32xx targets
Date: Mon, 12 Aug 2019 09:09:55 +0200 [thread overview]
Message-ID: <CAMpxmJVwsUHmr-89iR8gQG=WN2-z6JxbP1Pxbbcb1DR+zE=98g@mail.gmail.com> (raw)
In-Reply-To: <20190809144043.476786-6-arnd@arndb.de>
pt., 9 sie 2019 o 16:43 Arnd Bergmann <arnd@arndb.de> napisał(a):
>
> The driver uses hardwire MMIO addresses instead of the data
> that is passed in device tree. Change it over to only
> hardcode the register offset values and allow compile-testing.
>
> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
> Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/configs/lpc32xx_defconfig | 1 +
> drivers/gpio/Kconfig | 7 ++
> drivers/gpio/Makefile | 2 +-
> drivers/gpio/gpio-lpc32xx.c | 118 +++++++++++++++++------------
> 4 files changed, 77 insertions(+), 51 deletions(-)
>
> diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
> index 0cdc6c7974b3..3772d5a8975a 100644
> --- a/arch/arm/configs/lpc32xx_defconfig
> +++ b/arch/arm/configs/lpc32xx_defconfig
> @@ -93,6 +93,7 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
> # CONFIG_HW_RANDOM is not set
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_PNX=y
> +CONFIG_GPIO_LPC32XX=y
> CONFIG_SPI=y
> CONFIG_SPI_PL022=y
> CONFIG_GPIO_SYSFS=y
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index bb13c266c329..8b40a578963c 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -311,6 +311,13 @@ config GPIO_LPC18XX
> Select this option to enable GPIO driver for
> NXP LPC18XX/43XX devices.
>
> +config GPIO_LPC32XX
> + tristate "NXP LPC32XX GPIO support"
> + depends on OF_GPIO && (ARCH_LPC32XX || COMPILE_TEST)
> + help
> + Select this option to enable GPIO driver for
> + NXP LPC32XX devices.
> +
> config GPIO_LYNXPOINT
> tristate "Intel Lynxpoint GPIO support"
> depends on ACPI && X86
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index a4e91175c708..87d659ae95eb 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -74,7 +74,7 @@ obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
> obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
> obj-$(CONFIG_GPIO_LP87565) += gpio-lp87565.o
> obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
> -obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
> +obj-$(CONFIG_GPIO_LPC32XX) += gpio-lpc32xx.o
> obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
> obj-$(CONFIG_GPIO_MADERA) += gpio-madera.o
> obj-$(CONFIG_GPIO_MAX3191X) += gpio-max3191x.o
> diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
> index 24885b3db3d5..4e626c4235c2 100644
> --- a/drivers/gpio/gpio-lpc32xx.c
> +++ b/drivers/gpio/gpio-lpc32xx.c
> @@ -16,36 +16,33 @@
> #include <linux/platform_device.h>
> #include <linux/module.h>
>
> -#include <mach/hardware.h>
> -#include <mach/platform.h>
> -
> -#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
> -#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
> -#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008)
> -#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C)
> -#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010)
> -#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014)
> -#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018)
> -#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C)
> -#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020)
> -#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024)
> -#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
> -#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
> -#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
> -#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040)
> -#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044)
> -#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048)
> -#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C)
> -#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050)
> -#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054)
> -#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058)
> -#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060)
> -#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064)
> -#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068)
> -#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C)
> -#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070)
> -#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074)
> -#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078)
> +#define LPC32XX_GPIO_P3_INP_STATE (0x000)
> +#define LPC32XX_GPIO_P3_OUTP_SET (0x004)
> +#define LPC32XX_GPIO_P3_OUTP_CLR (0x008)
> +#define LPC32XX_GPIO_P3_OUTP_STATE (0x00C)
> +#define LPC32XX_GPIO_P2_DIR_SET (0x010)
> +#define LPC32XX_GPIO_P2_DIR_CLR (0x014)
> +#define LPC32XX_GPIO_P2_DIR_STATE (0x018)
> +#define LPC32XX_GPIO_P2_INP_STATE (0x01C)
> +#define LPC32XX_GPIO_P2_OUTP_SET (0x020)
> +#define LPC32XX_GPIO_P2_OUTP_CLR (0x024)
> +#define LPC32XX_GPIO_P2_MUX_SET (0x028)
> +#define LPC32XX_GPIO_P2_MUX_CLR (0x02C)
> +#define LPC32XX_GPIO_P2_MUX_STATE (0x030)
> +#define LPC32XX_GPIO_P0_INP_STATE (0x040)
> +#define LPC32XX_GPIO_P0_OUTP_SET (0x044)
> +#define LPC32XX_GPIO_P0_OUTP_CLR (0x048)
> +#define LPC32XX_GPIO_P0_OUTP_STATE (0x04C)
> +#define LPC32XX_GPIO_P0_DIR_SET (0x050)
> +#define LPC32XX_GPIO_P0_DIR_CLR (0x054)
> +#define LPC32XX_GPIO_P0_DIR_STATE (0x058)
> +#define LPC32XX_GPIO_P1_INP_STATE (0x060)
> +#define LPC32XX_GPIO_P1_OUTP_SET (0x064)
> +#define LPC32XX_GPIO_P1_OUTP_CLR (0x068)
> +#define LPC32XX_GPIO_P1_OUTP_STATE (0x06C)
> +#define LPC32XX_GPIO_P1_DIR_SET (0x070)
> +#define LPC32XX_GPIO_P1_DIR_CLR (0x074)
> +#define LPC32XX_GPIO_P1_DIR_STATE (0x078)
>
> #define GPIO012_PIN_TO_BIT(x) (1 << (x))
> #define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25))
> @@ -72,12 +69,12 @@
> #define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
>
> struct gpio_regs {
> - void __iomem *inp_state;
> - void __iomem *outp_state;
> - void __iomem *outp_set;
> - void __iomem *outp_clr;
> - void __iomem *dir_set;
> - void __iomem *dir_clr;
> + unsigned long inp_state;
> + unsigned long outp_state;
> + unsigned long outp_set;
> + unsigned long outp_clr;
> + unsigned long dir_set;
> + unsigned long dir_clr;
> };
>
> /*
> @@ -165,16 +162,27 @@ static struct gpio_regs gpio_grp_regs_p3 = {
> struct lpc32xx_gpio_chip {
> struct gpio_chip chip;
> struct gpio_regs *gpio_grp;
> + void __iomem *reg_base;
> };
>
> +static inline u32 gpreg_read(struct lpc32xx_gpio_chip *group, unsigned long offset)
> +{
> + return __raw_readl(group->reg_base + offset);
> +}
> +
> +static inline void gpreg_write(struct lpc32xx_gpio_chip *group, u32 val, unsigned long offset)
> +{
> + __raw_writel(val, group->reg_base + offset);
> +}
> +
> static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
> unsigned pin, int input)
> {
> if (input)
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->dir_clr);
> else
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->dir_set);
> }
>
> @@ -184,19 +192,19 @@ static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
> u32 u = GPIO3_PIN_TO_BIT(pin);
>
> if (input)
> - __raw_writel(u, group->gpio_grp->dir_clr);
> + gpreg_write(group, u, group->gpio_grp->dir_clr);
> else
> - __raw_writel(u, group->gpio_grp->dir_set);
> + gpreg_write(group, u, group->gpio_grp->dir_set);
> }
>
> static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
> unsigned pin, int high)
> {
> if (high)
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->outp_set);
> else
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->outp_clr);
> }
>
> @@ -206,31 +214,31 @@ static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
> u32 u = GPIO3_PIN_TO_BIT(pin);
>
> if (high)
> - __raw_writel(u, group->gpio_grp->outp_set);
> + gpreg_write(group, u, group->gpio_grp->outp_set);
> else
> - __raw_writel(u, group->gpio_grp->outp_clr);
> + gpreg_write(group, u, group->gpio_grp->outp_clr);
> }
>
> static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin, int high)
> {
> if (high)
> - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
> + gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
> else
> - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
> + gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
> }
>
> static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
> + return GPIO012_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state),
> pin);
> }
>
> static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - int state = __raw_readl(group->gpio_grp->inp_state);
> + int state = gpreg_read(group, group->gpio_grp->inp_state);
>
> /*
> * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
> @@ -242,13 +250,13 @@ static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
> static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
> + return GPI3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state), pin);
> }
>
> static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - return GPO3_PIN_IN_SEL(__raw_readl(group->gpio_grp->outp_state), pin);
> + return GPO3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->outp_state), pin);
> }
>
> /*
> @@ -497,12 +505,18 @@ static int lpc32xx_of_xlate(struct gpio_chip *gc,
> static int lpc32xx_gpio_probe(struct platform_device *pdev)
> {
> int i;
> + void __iomem *reg_base;
> +
> + reg_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(reg_base))
> + return PTR_ERR(reg_base);
>
> for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
> if (pdev->dev.of_node) {
> lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
> lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
> lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
> + lpc32xx_gpiochip[i].reg_base = reg_base;
> }
> devm_gpiochip_add_data(&pdev->dev, &lpc32xx_gpiochip[i].chip,
> &lpc32xx_gpiochip[i]);
> @@ -527,3 +541,7 @@ static struct platform_driver lpc32xx_gpio_driver = {
> };
>
> module_platform_driver(lpc32xx_gpio_driver);
> +
> +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("GPIO driver for LPC32xx SoC");
> --
> 2.20.0
>
Applied, thanks!
Bart
WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>,
LKML <linux-kernel@vger.kernel.org>,
Vladimir Zapolskiy <vz@mleia.com>,
linux-gpio <linux-gpio@vger.kernel.org>,
soc@kernel.org, Sylvain Lemieux <slemieux.tyco@gmail.com>,
arm-soc <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 05/13] gpio: lpc32xx: allow building on non-lpc32xx targets
Date: Mon, 12 Aug 2019 09:09:55 +0200 [thread overview]
Message-ID: <CAMpxmJVwsUHmr-89iR8gQG=WN2-z6JxbP1Pxbbcb1DR+zE=98g@mail.gmail.com> (raw)
In-Reply-To: <20190809144043.476786-6-arnd@arndb.de>
pt., 9 sie 2019 o 16:43 Arnd Bergmann <arnd@arndb.de> napisał(a):
>
> The driver uses hardwire MMIO addresses instead of the data
> that is passed in device tree. Change it over to only
> hardcode the register offset values and allow compile-testing.
>
> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
> Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/configs/lpc32xx_defconfig | 1 +
> drivers/gpio/Kconfig | 7 ++
> drivers/gpio/Makefile | 2 +-
> drivers/gpio/gpio-lpc32xx.c | 118 +++++++++++++++++------------
> 4 files changed, 77 insertions(+), 51 deletions(-)
>
> diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
> index 0cdc6c7974b3..3772d5a8975a 100644
> --- a/arch/arm/configs/lpc32xx_defconfig
> +++ b/arch/arm/configs/lpc32xx_defconfig
> @@ -93,6 +93,7 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
> # CONFIG_HW_RANDOM is not set
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_PNX=y
> +CONFIG_GPIO_LPC32XX=y
> CONFIG_SPI=y
> CONFIG_SPI_PL022=y
> CONFIG_GPIO_SYSFS=y
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index bb13c266c329..8b40a578963c 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -311,6 +311,13 @@ config GPIO_LPC18XX
> Select this option to enable GPIO driver for
> NXP LPC18XX/43XX devices.
>
> +config GPIO_LPC32XX
> + tristate "NXP LPC32XX GPIO support"
> + depends on OF_GPIO && (ARCH_LPC32XX || COMPILE_TEST)
> + help
> + Select this option to enable GPIO driver for
> + NXP LPC32XX devices.
> +
> config GPIO_LYNXPOINT
> tristate "Intel Lynxpoint GPIO support"
> depends on ACPI && X86
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index a4e91175c708..87d659ae95eb 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -74,7 +74,7 @@ obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
> obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
> obj-$(CONFIG_GPIO_LP87565) += gpio-lp87565.o
> obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
> -obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
> +obj-$(CONFIG_GPIO_LPC32XX) += gpio-lpc32xx.o
> obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
> obj-$(CONFIG_GPIO_MADERA) += gpio-madera.o
> obj-$(CONFIG_GPIO_MAX3191X) += gpio-max3191x.o
> diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
> index 24885b3db3d5..4e626c4235c2 100644
> --- a/drivers/gpio/gpio-lpc32xx.c
> +++ b/drivers/gpio/gpio-lpc32xx.c
> @@ -16,36 +16,33 @@
> #include <linux/platform_device.h>
> #include <linux/module.h>
>
> -#include <mach/hardware.h>
> -#include <mach/platform.h>
> -
> -#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
> -#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
> -#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008)
> -#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C)
> -#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010)
> -#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014)
> -#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018)
> -#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C)
> -#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020)
> -#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024)
> -#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
> -#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
> -#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
> -#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040)
> -#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044)
> -#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048)
> -#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C)
> -#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050)
> -#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054)
> -#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058)
> -#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060)
> -#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064)
> -#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068)
> -#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C)
> -#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070)
> -#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074)
> -#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078)
> +#define LPC32XX_GPIO_P3_INP_STATE (0x000)
> +#define LPC32XX_GPIO_P3_OUTP_SET (0x004)
> +#define LPC32XX_GPIO_P3_OUTP_CLR (0x008)
> +#define LPC32XX_GPIO_P3_OUTP_STATE (0x00C)
> +#define LPC32XX_GPIO_P2_DIR_SET (0x010)
> +#define LPC32XX_GPIO_P2_DIR_CLR (0x014)
> +#define LPC32XX_GPIO_P2_DIR_STATE (0x018)
> +#define LPC32XX_GPIO_P2_INP_STATE (0x01C)
> +#define LPC32XX_GPIO_P2_OUTP_SET (0x020)
> +#define LPC32XX_GPIO_P2_OUTP_CLR (0x024)
> +#define LPC32XX_GPIO_P2_MUX_SET (0x028)
> +#define LPC32XX_GPIO_P2_MUX_CLR (0x02C)
> +#define LPC32XX_GPIO_P2_MUX_STATE (0x030)
> +#define LPC32XX_GPIO_P0_INP_STATE (0x040)
> +#define LPC32XX_GPIO_P0_OUTP_SET (0x044)
> +#define LPC32XX_GPIO_P0_OUTP_CLR (0x048)
> +#define LPC32XX_GPIO_P0_OUTP_STATE (0x04C)
> +#define LPC32XX_GPIO_P0_DIR_SET (0x050)
> +#define LPC32XX_GPIO_P0_DIR_CLR (0x054)
> +#define LPC32XX_GPIO_P0_DIR_STATE (0x058)
> +#define LPC32XX_GPIO_P1_INP_STATE (0x060)
> +#define LPC32XX_GPIO_P1_OUTP_SET (0x064)
> +#define LPC32XX_GPIO_P1_OUTP_CLR (0x068)
> +#define LPC32XX_GPIO_P1_OUTP_STATE (0x06C)
> +#define LPC32XX_GPIO_P1_DIR_SET (0x070)
> +#define LPC32XX_GPIO_P1_DIR_CLR (0x074)
> +#define LPC32XX_GPIO_P1_DIR_STATE (0x078)
>
> #define GPIO012_PIN_TO_BIT(x) (1 << (x))
> #define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25))
> @@ -72,12 +69,12 @@
> #define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
>
> struct gpio_regs {
> - void __iomem *inp_state;
> - void __iomem *outp_state;
> - void __iomem *outp_set;
> - void __iomem *outp_clr;
> - void __iomem *dir_set;
> - void __iomem *dir_clr;
> + unsigned long inp_state;
> + unsigned long outp_state;
> + unsigned long outp_set;
> + unsigned long outp_clr;
> + unsigned long dir_set;
> + unsigned long dir_clr;
> };
>
> /*
> @@ -165,16 +162,27 @@ static struct gpio_regs gpio_grp_regs_p3 = {
> struct lpc32xx_gpio_chip {
> struct gpio_chip chip;
> struct gpio_regs *gpio_grp;
> + void __iomem *reg_base;
> };
>
> +static inline u32 gpreg_read(struct lpc32xx_gpio_chip *group, unsigned long offset)
> +{
> + return __raw_readl(group->reg_base + offset);
> +}
> +
> +static inline void gpreg_write(struct lpc32xx_gpio_chip *group, u32 val, unsigned long offset)
> +{
> + __raw_writel(val, group->reg_base + offset);
> +}
> +
> static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
> unsigned pin, int input)
> {
> if (input)
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->dir_clr);
> else
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->dir_set);
> }
>
> @@ -184,19 +192,19 @@ static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
> u32 u = GPIO3_PIN_TO_BIT(pin);
>
> if (input)
> - __raw_writel(u, group->gpio_grp->dir_clr);
> + gpreg_write(group, u, group->gpio_grp->dir_clr);
> else
> - __raw_writel(u, group->gpio_grp->dir_set);
> + gpreg_write(group, u, group->gpio_grp->dir_set);
> }
>
> static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
> unsigned pin, int high)
> {
> if (high)
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->outp_set);
> else
> - __raw_writel(GPIO012_PIN_TO_BIT(pin),
> + gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
> group->gpio_grp->outp_clr);
> }
>
> @@ -206,31 +214,31 @@ static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
> u32 u = GPIO3_PIN_TO_BIT(pin);
>
> if (high)
> - __raw_writel(u, group->gpio_grp->outp_set);
> + gpreg_write(group, u, group->gpio_grp->outp_set);
> else
> - __raw_writel(u, group->gpio_grp->outp_clr);
> + gpreg_write(group, u, group->gpio_grp->outp_clr);
> }
>
> static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin, int high)
> {
> if (high)
> - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
> + gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
> else
> - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
> + gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
> }
>
> static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
> + return GPIO012_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state),
> pin);
> }
>
> static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - int state = __raw_readl(group->gpio_grp->inp_state);
> + int state = gpreg_read(group, group->gpio_grp->inp_state);
>
> /*
> * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
> @@ -242,13 +250,13 @@ static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
> static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
> + return GPI3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state), pin);
> }
>
> static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group,
> unsigned pin)
> {
> - return GPO3_PIN_IN_SEL(__raw_readl(group->gpio_grp->outp_state), pin);
> + return GPO3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->outp_state), pin);
> }
>
> /*
> @@ -497,12 +505,18 @@ static int lpc32xx_of_xlate(struct gpio_chip *gc,
> static int lpc32xx_gpio_probe(struct platform_device *pdev)
> {
> int i;
> + void __iomem *reg_base;
> +
> + reg_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(reg_base))
> + return PTR_ERR(reg_base);
>
> for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
> if (pdev->dev.of_node) {
> lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
> lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
> lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
> + lpc32xx_gpiochip[i].reg_base = reg_base;
> }
> devm_gpiochip_add_data(&pdev->dev, &lpc32xx_gpiochip[i].chip,
> &lpc32xx_gpiochip[i]);
> @@ -527,3 +541,7 @@ static struct platform_driver lpc32xx_gpio_driver = {
> };
>
> module_platform_driver(lpc32xx_gpio_driver);
> +
> +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("GPIO driver for LPC32xx SoC");
> --
> 2.20.0
>
Applied, thanks!
Bart
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-12 7:10 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-09 14:40 [PATCH v2 00/13] v2: ARM: move lpc32xx to multiplatform Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 01/13] usb: ohci-nxp: enable compile-testing Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-15 12:42 ` Greg Kroah-Hartman
2019-08-15 12:42 ` Greg Kroah-Hartman
2019-08-09 14:40 ` [PATCH v2 02/13] usb: udc: lpc32xx: allow compile-testing Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 03/13] watchdog: pnx4008_wdt: " Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 04/13] serial: lpc32xx_hs: " Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 05/13] gpio: lpc32xx: allow building on non-lpc32xx targets Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-12 7:09 ` Bartosz Golaszewski [this message]
2019-08-12 7:09 ` Bartosz Golaszewski
2019-08-09 14:40 ` [PATCH v2 06/13] net: lpc-enet: factor out iram access Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 07/13] net: lpc-enet: move phy setup into platform code Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 08/13] net: lpc-enet: fix badzero.cocci warnings Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 09/13] net: lpc-enet: fix printk format strings Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 16:30 ` Joe Perches
2019-08-09 16:30 ` Joe Perches
2019-08-09 18:20 ` Arnd Bergmann
2019-08-09 18:20 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 10/13] net: lpc-enet: allow compile testing Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 11/13] serial: lpc32xx: " Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-15 13:40 ` Greg Kroah-Hartman
2019-08-15 13:40 ` Greg Kroah-Hartman
2019-08-09 14:40 ` [PATCH v2 12/13] ARM: lpc32xx: clean up header files Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 13/13] ARM: lpc32xx: allow multiplatform build Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMpxmJVwsUHmr-89iR8gQG=WN2-z6JxbP1Pxbbcb1DR+zE=98g@mail.gmail.com' \
--to=bgolaszewski@baylibre.com \
--cc=arnd@arndb.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=slemieux.tyco@gmail.com \
--cc=soc@kernel.org \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.