From: Anand Moon <linux.amoon@gmail.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-amlogic@lists.infradead.org,
Linux Kernel <linux-kernel@vger.kernel.org>,
"open list:COMMON CLK FRAMEWORK" <linux-clk@vger.kernel.org>
Subject: Re: [PATCHv1 3/3] clk: meson: g12a: set cpu clock divider flags too CLK_IS_CRITICAL
Date: Sun, 23 Feb 2020 19:04:23 +0530 [thread overview]
Message-ID: <CANAwSgRZy1K0GZq30cEoH2KiJfjX-5LvkMy79ZeM_aSEyrkD+g@mail.gmail.com> (raw)
In-Reply-To: <CAFBinCCSosE1XfwbKZOR9G+DVYg8zFcKShmTNWUhh1e8W0VoAQ@mail.gmail.com>
Hi Martin / Jerome / Neil,
On Fri, 21 Feb 2020 at 02:45, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> Hi Anand,
>
> On Mon, Feb 17, 2020 at 2:30 PM Anand Moon <linux.amoon@gmail.com> wrote:
> [...]
> > > > @@ -681,7 +682,7 @@ static struct clk_regmap g12b_cpub_clk = {
> > > > &g12a_sys_pll.hw
> > > > },
> > > > .num_parents = 2,
> > > > - .flags = CLK_SET_RATE_PARENT,
> > > > + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > >
> > > Why not. Neil what do you think of this ?
> > > If nothing is claiming this clock and enabling it then I suppose it
> > > could make sense.
> > >
> > I would like core developers to handle this.
> > Sorry for the noise.
> can you please resend this patch with only the change to g12b_cpub_clk?
> I have no G12B board myself so it would be great if you could take care of this!
>
>
> Martin
Thanks, yes I will try again, but I have a question.
On eMMC module *cpub_clk* is not getting enabled, see below is
clk_summay of eMMC.
[...]
fclk_div2_div 1 1 0 999999985
0 0 50000
fclk_div2 2 2 0 999999985
0 0 50000
ff3f0000.ethernet#m250_sel 1 1 0
999999985 0 0 50000
ff3f0000.ethernet#m250_div 1 1
0 249999997 0 0 50000
ff3f0000.ethernet#fixed_div2 1 1
0 124999998 0 0 50000
ff3f0000.ethernet#rgmii_tx_en 1
1 0 124999998 0 0 50000
ffe07000.mmc#mux 1 1 0 999999985
0 0 50000
ffe07000.mmc#div 1 1 0
199999997 0 0 50000
cpub_clk_dyn1_sel 0 0 0
999999985 0 0 50000
cpub_clk_dyn1 0 0 0 999999985
0 0 50000
cpub_clk_dyn 0 0 0
999999985 0 0 50000
cpub_clk 0 0 0
999999985 0 0 50000
cpub_clk_div8 0 0 0
124999998 0 0 50000
cpub_clk_div7 0 0 0
142857140 0 0 50000
cpub_clk_div6 0 0 0
166666664 0 0 50000
cpub_clk_trace_sel 0 0
0 166666664 0 0 50000
cpub_clk_trace 0 0
0 166666664 0 0 50000
cpub_clk_div5 0 0 0
199999997 0 0 50000
cpub_clk_apb_sel 0 0
0 199999997 0 0 50000
cpub_clk_apb 0 0
0 199999997 0 0 50000
cpub_clk_div4 0 0 0
249999996 0 0 50000
cpub_clk_div3 0 0 0
333333328 0 0 50000
cpub_clk_atb_sel 0 0
0 333333328 0 0 50000
cpub_clk_atb 0 0
0 333333328 0 0 50000
cpub_clk_div2 0 0 0
499999992 0 0 50000
cpub_clk_axi_sel 0 0
0 499999992 0 0 50000
cpub_clk_axi 0 0
0 499999992 0 0 50000
cpub_clk_div16_en 0 0
0 999999985 0 0 50000
cpub_clk_div16 0 0
0 62499999 0 0 50000
After enable *cpub_clk* flags with
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
this clk is enabled on microSD card see clk_summary below.
[...]
fclk_div2_div 1 1 0 999999985
0 0 50000
fclk_div2 3 3 0 999999985
0 0 50000
ff3f0000.ethernet#m250_sel 1 1 0
999999985 0 0 50000
ff3f0000.ethernet#m250_div 1 1
0 249999997 0 0 50000
ff3f0000.ethernet#fixed_div2 1 1
0 124999998 0 0 50000
ff3f0000.ethernet#rgmii_tx_en 1
1 0 124999998 0 0 50000
ffe05000.sd#mux 1 1 0 999999985
0 0 50000
ffe05000.sd#div 1 1 0
50000000 0 0 50000
cpub_clk_dyn1_sel 1 1 0
999999985 0 0 50000
cpub_clk_dyn1 1 1 0 999999985
0 0 50000
cpub_clk_dyn 1 1 0
999999985 0 0 50000
cpub_clk 1 1 0
999999985 0 0 50000
cpub_clk_div8 0 0 0
124999998 0 0 50000
cpub_clk_div7 0 0 0
142857140 0 0 50000
cpub_clk_div6 0 0 0
166666664 0 0 50000
cpub_clk_trace_sel 0 0
0 166666664 0 0 50000
cpub_clk_trace 0 0
0 166666664 0 0 50000
cpub_clk_div5 0 0 0
199999997 0 0 50000
cpub_clk_apb_sel 0 0
0 199999997 0 0 50000
cpub_clk_apb 0 0
0 199999997 0 0 50000
cpub_clk_div4 0 0 0
249999996 0 0 50000
cpub_clk_div3 0 0 0
333333328 0 0 50000
cpub_clk_atb_sel 0 0
0 333333328 0 0 50000
cpub_clk_atb 0 0
0 333333328 0 0 50000
cpub_clk_div2 0 0 0
499999992 0 0 50000
cpub_clk_axi_sel 0 0
0 499999992 0 0 50000
cpub_clk_axi 0 0
0 499999992 0 0 50000
cpub_clk_div16_en 0 0
0 999999985 0 0 50000
cpub_clk_div16 0 0
0 62499999 0 0 50000
cpub_clk_dyn1_div 0 0 0
999999985 0 0 50000
Is this correct approach to set the flags to enable *cpub_clk*.
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
What I meant is their *Dyn_enable[26]* field for enable/disable for
HHI_SYS_CPU_CLK_CNTL0 and HHI_SYS_CPUB_CLK_CNTL clk controller.
in the S922X datasheets which could help resolve this issue.
Any thought on this.
-Anand
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree <devicetree@vger.kernel.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
linux-amlogic@lists.infradead.org,
"open list:COMMON CLK FRAMEWORK" <linux-clk@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCHv1 3/3] clk: meson: g12a: set cpu clock divider flags too CLK_IS_CRITICAL
Date: Sun, 23 Feb 2020 19:04:23 +0530 [thread overview]
Message-ID: <CANAwSgRZy1K0GZq30cEoH2KiJfjX-5LvkMy79ZeM_aSEyrkD+g@mail.gmail.com> (raw)
In-Reply-To: <CAFBinCCSosE1XfwbKZOR9G+DVYg8zFcKShmTNWUhh1e8W0VoAQ@mail.gmail.com>
Hi Martin / Jerome / Neil,
On Fri, 21 Feb 2020 at 02:45, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> Hi Anand,
>
> On Mon, Feb 17, 2020 at 2:30 PM Anand Moon <linux.amoon@gmail.com> wrote:
> [...]
> > > > @@ -681,7 +682,7 @@ static struct clk_regmap g12b_cpub_clk = {
> > > > &g12a_sys_pll.hw
> > > > },
> > > > .num_parents = 2,
> > > > - .flags = CLK_SET_RATE_PARENT,
> > > > + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > >
> > > Why not. Neil what do you think of this ?
> > > If nothing is claiming this clock and enabling it then I suppose it
> > > could make sense.
> > >
> > I would like core developers to handle this.
> > Sorry for the noise.
> can you please resend this patch with only the change to g12b_cpub_clk?
> I have no G12B board myself so it would be great if you could take care of this!
>
>
> Martin
Thanks, yes I will try again, but I have a question.
On eMMC module *cpub_clk* is not getting enabled, see below is
clk_summay of eMMC.
[...]
fclk_div2_div 1 1 0 999999985
0 0 50000
fclk_div2 2 2 0 999999985
0 0 50000
ff3f0000.ethernet#m250_sel 1 1 0
999999985 0 0 50000
ff3f0000.ethernet#m250_div 1 1
0 249999997 0 0 50000
ff3f0000.ethernet#fixed_div2 1 1
0 124999998 0 0 50000
ff3f0000.ethernet#rgmii_tx_en 1
1 0 124999998 0 0 50000
ffe07000.mmc#mux 1 1 0 999999985
0 0 50000
ffe07000.mmc#div 1 1 0
199999997 0 0 50000
cpub_clk_dyn1_sel 0 0 0
999999985 0 0 50000
cpub_clk_dyn1 0 0 0 999999985
0 0 50000
cpub_clk_dyn 0 0 0
999999985 0 0 50000
cpub_clk 0 0 0
999999985 0 0 50000
cpub_clk_div8 0 0 0
124999998 0 0 50000
cpub_clk_div7 0 0 0
142857140 0 0 50000
cpub_clk_div6 0 0 0
166666664 0 0 50000
cpub_clk_trace_sel 0 0
0 166666664 0 0 50000
cpub_clk_trace 0 0
0 166666664 0 0 50000
cpub_clk_div5 0 0 0
199999997 0 0 50000
cpub_clk_apb_sel 0 0
0 199999997 0 0 50000
cpub_clk_apb 0 0
0 199999997 0 0 50000
cpub_clk_div4 0 0 0
249999996 0 0 50000
cpub_clk_div3 0 0 0
333333328 0 0 50000
cpub_clk_atb_sel 0 0
0 333333328 0 0 50000
cpub_clk_atb 0 0
0 333333328 0 0 50000
cpub_clk_div2 0 0 0
499999992 0 0 50000
cpub_clk_axi_sel 0 0
0 499999992 0 0 50000
cpub_clk_axi 0 0
0 499999992 0 0 50000
cpub_clk_div16_en 0 0
0 999999985 0 0 50000
cpub_clk_div16 0 0
0 62499999 0 0 50000
After enable *cpub_clk* flags with
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
this clk is enabled on microSD card see clk_summary below.
[...]
fclk_div2_div 1 1 0 999999985
0 0 50000
fclk_div2 3 3 0 999999985
0 0 50000
ff3f0000.ethernet#m250_sel 1 1 0
999999985 0 0 50000
ff3f0000.ethernet#m250_div 1 1
0 249999997 0 0 50000
ff3f0000.ethernet#fixed_div2 1 1
0 124999998 0 0 50000
ff3f0000.ethernet#rgmii_tx_en 1
1 0 124999998 0 0 50000
ffe05000.sd#mux 1 1 0 999999985
0 0 50000
ffe05000.sd#div 1 1 0
50000000 0 0 50000
cpub_clk_dyn1_sel 1 1 0
999999985 0 0 50000
cpub_clk_dyn1 1 1 0 999999985
0 0 50000
cpub_clk_dyn 1 1 0
999999985 0 0 50000
cpub_clk 1 1 0
999999985 0 0 50000
cpub_clk_div8 0 0 0
124999998 0 0 50000
cpub_clk_div7 0 0 0
142857140 0 0 50000
cpub_clk_div6 0 0 0
166666664 0 0 50000
cpub_clk_trace_sel 0 0
0 166666664 0 0 50000
cpub_clk_trace 0 0
0 166666664 0 0 50000
cpub_clk_div5 0 0 0
199999997 0 0 50000
cpub_clk_apb_sel 0 0
0 199999997 0 0 50000
cpub_clk_apb 0 0
0 199999997 0 0 50000
cpub_clk_div4 0 0 0
249999996 0 0 50000
cpub_clk_div3 0 0 0
333333328 0 0 50000
cpub_clk_atb_sel 0 0
0 333333328 0 0 50000
cpub_clk_atb 0 0
0 333333328 0 0 50000
cpub_clk_div2 0 0 0
499999992 0 0 50000
cpub_clk_axi_sel 0 0
0 499999992 0 0 50000
cpub_clk_axi 0 0
0 499999992 0 0 50000
cpub_clk_div16_en 0 0
0 999999985 0 0 50000
cpub_clk_div16 0 0
0 62499999 0 0 50000
cpub_clk_dyn1_div 0 0 0
999999985 0 0 50000
Is this correct approach to set the flags to enable *cpub_clk*.
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
What I meant is their *Dyn_enable[26]* field for enable/disable for
HHI_SYS_CPU_CLK_CNTL0 and HHI_SYS_CPUB_CLK_CNTL clk controller.
in the S922X datasheets which could help resolve this issue.
Any thought on this.
-Anand
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree <devicetree@vger.kernel.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
linux-amlogic@lists.infradead.org,
"open list:COMMON CLK FRAMEWORK" <linux-clk@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCHv1 3/3] clk: meson: g12a: set cpu clock divider flags too CLK_IS_CRITICAL
Date: Sun, 23 Feb 2020 19:04:23 +0530 [thread overview]
Message-ID: <CANAwSgRZy1K0GZq30cEoH2KiJfjX-5LvkMy79ZeM_aSEyrkD+g@mail.gmail.com> (raw)
In-Reply-To: <CAFBinCCSosE1XfwbKZOR9G+DVYg8zFcKShmTNWUhh1e8W0VoAQ@mail.gmail.com>
Hi Martin / Jerome / Neil,
On Fri, 21 Feb 2020 at 02:45, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> Hi Anand,
>
> On Mon, Feb 17, 2020 at 2:30 PM Anand Moon <linux.amoon@gmail.com> wrote:
> [...]
> > > > @@ -681,7 +682,7 @@ static struct clk_regmap g12b_cpub_clk = {
> > > > &g12a_sys_pll.hw
> > > > },
> > > > .num_parents = 2,
> > > > - .flags = CLK_SET_RATE_PARENT,
> > > > + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > >
> > > Why not. Neil what do you think of this ?
> > > If nothing is claiming this clock and enabling it then I suppose it
> > > could make sense.
> > >
> > I would like core developers to handle this.
> > Sorry for the noise.
> can you please resend this patch with only the change to g12b_cpub_clk?
> I have no G12B board myself so it would be great if you could take care of this!
>
>
> Martin
Thanks, yes I will try again, but I have a question.
On eMMC module *cpub_clk* is not getting enabled, see below is
clk_summay of eMMC.
[...]
fclk_div2_div 1 1 0 999999985
0 0 50000
fclk_div2 2 2 0 999999985
0 0 50000
ff3f0000.ethernet#m250_sel 1 1 0
999999985 0 0 50000
ff3f0000.ethernet#m250_div 1 1
0 249999997 0 0 50000
ff3f0000.ethernet#fixed_div2 1 1
0 124999998 0 0 50000
ff3f0000.ethernet#rgmii_tx_en 1
1 0 124999998 0 0 50000
ffe07000.mmc#mux 1 1 0 999999985
0 0 50000
ffe07000.mmc#div 1 1 0
199999997 0 0 50000
cpub_clk_dyn1_sel 0 0 0
999999985 0 0 50000
cpub_clk_dyn1 0 0 0 999999985
0 0 50000
cpub_clk_dyn 0 0 0
999999985 0 0 50000
cpub_clk 0 0 0
999999985 0 0 50000
cpub_clk_div8 0 0 0
124999998 0 0 50000
cpub_clk_div7 0 0 0
142857140 0 0 50000
cpub_clk_div6 0 0 0
166666664 0 0 50000
cpub_clk_trace_sel 0 0
0 166666664 0 0 50000
cpub_clk_trace 0 0
0 166666664 0 0 50000
cpub_clk_div5 0 0 0
199999997 0 0 50000
cpub_clk_apb_sel 0 0
0 199999997 0 0 50000
cpub_clk_apb 0 0
0 199999997 0 0 50000
cpub_clk_div4 0 0 0
249999996 0 0 50000
cpub_clk_div3 0 0 0
333333328 0 0 50000
cpub_clk_atb_sel 0 0
0 333333328 0 0 50000
cpub_clk_atb 0 0
0 333333328 0 0 50000
cpub_clk_div2 0 0 0
499999992 0 0 50000
cpub_clk_axi_sel 0 0
0 499999992 0 0 50000
cpub_clk_axi 0 0
0 499999992 0 0 50000
cpub_clk_div16_en 0 0
0 999999985 0 0 50000
cpub_clk_div16 0 0
0 62499999 0 0 50000
After enable *cpub_clk* flags with
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
this clk is enabled on microSD card see clk_summary below.
[...]
fclk_div2_div 1 1 0 999999985
0 0 50000
fclk_div2 3 3 0 999999985
0 0 50000
ff3f0000.ethernet#m250_sel 1 1 0
999999985 0 0 50000
ff3f0000.ethernet#m250_div 1 1
0 249999997 0 0 50000
ff3f0000.ethernet#fixed_div2 1 1
0 124999998 0 0 50000
ff3f0000.ethernet#rgmii_tx_en 1
1 0 124999998 0 0 50000
ffe05000.sd#mux 1 1 0 999999985
0 0 50000
ffe05000.sd#div 1 1 0
50000000 0 0 50000
cpub_clk_dyn1_sel 1 1 0
999999985 0 0 50000
cpub_clk_dyn1 1 1 0 999999985
0 0 50000
cpub_clk_dyn 1 1 0
999999985 0 0 50000
cpub_clk 1 1 0
999999985 0 0 50000
cpub_clk_div8 0 0 0
124999998 0 0 50000
cpub_clk_div7 0 0 0
142857140 0 0 50000
cpub_clk_div6 0 0 0
166666664 0 0 50000
cpub_clk_trace_sel 0 0
0 166666664 0 0 50000
cpub_clk_trace 0 0
0 166666664 0 0 50000
cpub_clk_div5 0 0 0
199999997 0 0 50000
cpub_clk_apb_sel 0 0
0 199999997 0 0 50000
cpub_clk_apb 0 0
0 199999997 0 0 50000
cpub_clk_div4 0 0 0
249999996 0 0 50000
cpub_clk_div3 0 0 0
333333328 0 0 50000
cpub_clk_atb_sel 0 0
0 333333328 0 0 50000
cpub_clk_atb 0 0
0 333333328 0 0 50000
cpub_clk_div2 0 0 0
499999992 0 0 50000
cpub_clk_axi_sel 0 0
0 499999992 0 0 50000
cpub_clk_axi 0 0
0 499999992 0 0 50000
cpub_clk_div16_en 0 0
0 999999985 0 0 50000
cpub_clk_div16 0 0
0 62499999 0 0 50000
cpub_clk_dyn1_div 0 0 0
999999985 0 0 50000
Is this correct approach to set the flags to enable *cpub_clk*.
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
What I meant is their *Dyn_enable[26]* field for enable/disable for
HHI_SYS_CPU_CLK_CNTL0 and HHI_SYS_CPUB_CLK_CNTL clk controller.
in the S922X datasheets which could help resolve this issue.
Any thought on this.
-Anand
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-02-23 13:34 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-16 17:34 [PATCHv1 0/3] Odroid N2 failes to boot using upstream kernel using microSD card Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-16 17:34 ` [PATCHv1 1/3] arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator to FLASH_VDD Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-16 17:34 ` [PATCHv1 2/3] arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to VDDIO_C/TF_IO Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-17 7:49 ` Jerome Brunet
2020-02-17 7:49 ` Jerome Brunet
2020-02-17 7:49 ` Jerome Brunet
2020-02-16 17:34 ` [PATCHv1 3/3] clk: meson: g12a: set cpu clock divider flags too CLK_IS_CRITICAL Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-16 17:34 ` Anand Moon
2020-02-17 8:02 ` Jerome Brunet
2020-02-17 8:02 ` Jerome Brunet
2020-02-17 8:02 ` Jerome Brunet
2020-02-17 8:51 ` Anand Moon
2020-02-17 8:51 ` Anand Moon
2020-02-17 8:51 ` Anand Moon
2020-02-17 13:30 ` Anand Moon
2020-02-17 13:30 ` Anand Moon
2020-02-17 13:30 ` Anand Moon
2020-02-20 21:15 ` Martin Blumenstingl
2020-02-20 21:15 ` Martin Blumenstingl
2020-02-20 21:15 ` Martin Blumenstingl
2020-02-23 13:34 ` Anand Moon [this message]
2020-02-23 13:34 ` Anand Moon
2020-02-23 13:34 ` Anand Moon
2020-02-24 9:31 ` Jerome Brunet
2020-02-24 9:31 ` Jerome Brunet
2020-02-24 9:31 ` Jerome Brunet
2020-02-24 10:17 ` Anand Moon
2020-02-24 10:17 ` Anand Moon
2020-02-24 10:17 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CANAwSgRZy1K0GZq30cEoH2KiJfjX-5LvkMy79ZeM_aSEyrkD+g@mail.gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.