From: Hector Oron <hector.oron@gmail.com>
To: Richard Zhu <richard.zhu@linaro.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>,
linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de,
eric.miao@linaro.org, linux-ide@vger.kernel.org, eric@eukrea.com,
avorontsov@ru.mvista.com, jgarzik@pobox.com
Subject: Re: [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms
Date: Tue, 6 Sep 2011 09:46:33 +0100 [thread overview]
Message-ID: <CAODfWeHTRuFZtnYZOD-mFonyjBvjhid4=0=a_mYXdjXAOQYejA@mail.gmail.com> (raw)
In-Reply-To: <CAJNCFVLP7gA_7vBjwVNkQaSg8LZ4hROLdNCx8SBVah=F1ptrhQ@mail.gmail.com>
Hi,
2011/9/1 Richard Zhu <richard.zhu@linaro.org>:
> Hi Hector:
> What's happen before "> [ 7.073106] EXT4-fs (sda2): re-mounted.
> Opts: errors=remount-ro"?
Here is my complete dmesg. The system seems to work fine, it is a
1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected
to mx53 LOCO with eSATA-to-SATA cable. I have around a Lacie eSATA
disk which I might attempt to connect.
Linux version 3.1.0-rc3-mx5 (zumbi@enorme) (gcc version 4.4.5 (Debian
4.4.5-8) ) #7 Tue Aug 30 13:17:14 BST 2011
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale MX53 LOCO Board
Ignoring RAM at b0000000-cfffffff (vmalloc region overlap).
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c0461e08, node_mem_map c04b2000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 130048 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: console=ttymxc0,115200 console=tty1
root=/dev/sda2 video=mxcdi1fb:GBR24,XGA di1_primary tve printk.time=1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 514948k/514948k available, 9340k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf4000000 ( 312 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0412000 (4136 kB)
[ 0.000000] .init : 0xc0412000 - 0xc0437000 ( 148 kB)
[ 0.000000] .data : 0xc0438000 - 0xc0462480 ( 170 kB)
[ 0.000000] .bss : 0xc04624a4 - 0xc04b1380 ( 316 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:400
[ 0.000000] TrustZone Interrupt Controller (TZIC) initialized
[ 0.000000] CPU identified as i.MX53, silicon rev 2.1
[ 0.000000] sched_clock: 32 bits at 55MHz, resolution 18ns, wraps
every 77386ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000556] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 0.040182] pid_max: default: 32768 minimum: 301
[ 0.040450] Mount-cache hash table entries: 512
[ 0.041059] CPU: Testing write buffer coherency: ok
[ 0.042459] devtmpfs: initialized
[ 0.044791] print_constraints: dummy:
[ 0.045120] NET: Registered protocol family 16
[ 0.065856] bio: create slab <bio-0> at 0
[ 0.067168] SCSI subsystem initialized
[ 0.067580] libata version 3.00 loaded.
[ 0.067989] usbcore: registered new interface driver usbfs
[ 0.068174] usbcore: registered new interface driver hub
[ 0.068488] usbcore: registered new device driver usb
[ 0.070182] Switching to clocksource mxc_timer1
[ 0.080403] Switched to NOHz mode on CPU #0
[ 0.088737] NET: Registered protocol family 2
[ 0.089034] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.089503] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.089861] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.090067] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.090096] TCP reno registered
[ 0.090128] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.090168] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.090626] NET: Registered protocol family 1
[ 0.091318] RPC: Registered named UNIX socket transport module.
[ 0.091381] RPC: Registered udp transport module.
[ 0.091407] RPC: Registered tcp transport module.
[ 0.091429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.115113] VFS: Disk quotas dquot_6.5.2
[ 0.115483] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.120839] fuse init (API version 7.16)
[ 0.121919] msgmni has been set to 1005
[ 0.122544] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.122618] io scheduler noop registered
[ 0.122646] io scheduler deadline registered
[ 0.122920] io scheduler cfq registered (default)
[ 0.123527] Serial: IMX driver
[ 0.123787] imx21-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX
[ 0.489212] console [ttymxc0] enabled
[ 0.502624] brd: module loaded
[ 0.511401] loop: module loaded
[ 0.515060] nbd: registered device at major 43
[ 0.532271] ahci: SSS flag set, parallel bus scan disabled
[ 0.537878] ahci imx53-ahci.0: AHCI 0001.0100 32 slots 1 ports 3
Gbps 0x1 impl platform mode
[ 0.546452] ahci imx53-ahci.0: flags: ncq sntf stag pm led clo only
pmp pio slum part ccc
[ 0.556008] scsi0 : ahci_platform
[ 0.560052] ata1: SATA max UDMA/133 mmio [mem
0x10000000-0x10000fff] port 0x100 irq 28
[ 0.568788] FEC Ethernet Driver
[ 0.575892] fec_enet_mii_bus: probed
[ 0.580170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.587109] Initializing USB Mass Storage driver...
[ 0.592309] usbcore: registered new interface driver usb-storage
[ 0.598353] USB Mass Storage support registered.
[ 0.603499] mousedev: PS/2 mouse device common for all mice
[ 0.609483] i2c /dev entries driver
[ 0.614322] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled.
timeout=60s (nowayout=0)
[ 0.623615] device-mapper: uevent: version 1.0.3
[ 0.629223] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06)
initialised: dm-devel@redhat.com
[ 0.637827] sdhci: Secure Digital Host Controller Interface driver
[ 0.644080] sdhci: Copyright(c) Pierre Ossman
[ 0.648461] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.654585] mmc0: no vmmc regulator found
[ 0.658808] Registered led device: mmc0::
[ 0.659016] mmc0: SDHCI controller on sdhci-esdhc-imx53.0
[sdhci-esdhc-imx53.0] using DMA
[ 0.667691] mmc1: no vmmc regulator found
[ 0.672020] Registered led device: mmc1::
[ 0.672265] mmc1: SDHCI controller on sdhci-esdhc-imx53.2
[sdhci-esdhc-imx53.2] using DMA
[ 0.681037] usbcore: registered new interface driver usbhid
[ 0.686655] usbhid: USB HID core driver
[ 0.790254] TCP cubic registered
[ 0.793596] NET: Registered protocol family 17
[ 0.798190] Registering the dns_resolver key type
[ 0.803078] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 2
[ 0.813279] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 0.820805] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.863099] mmc0: host does not support reading read-only switch.
assuming write-enable.
[ 0.970967] mmc0: new SD card at address 1234
[ 1.540405] ata1: softreset failed (device not ready)
[ 1.545514] ata1: applying PMP SRST workaround and retrying
[ 1.750408] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.764169] ata1.00: ATA-8: WDC WD10TPVT-00U4RT1, 01.01A01, max UDMA/133
[ 1.770981] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.786154] ata1.00: configured for UDMA/133
[ 1.791272] scsi 0:0:0:0: Direct-Access ATA WDC
WD10TPVT-00U 01.0 PQ: 0 ANSI: 5
[ 1.800460] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 1.808190] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.815016] sd 0:0:0:0: [sda] Write Protect is off
[ 1.819878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.820201] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.856631] sda: sda1 sda2 sda3 sda4
[ 1.863666] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.880189] EXT3-fs (sda2): error: couldn't mount because of
unsupported optional features (240)
[ 1.890482] EXT2-fs (sda2): error: couldn't mount because of
unsupported optional features (240)
[ 1.932146] EXT4-fs (sda2): warning: maximal mount count reached,
running e2fsck is recommended
[ 1.959428] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.967300] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 1.989215] devtmpfs: mounted
[ 1.992660] Freeing init memory: 148K
[ 3.913577] udev[67]: starting version 164
[ 4.877589] mmcblk0: mmc0:1234 SA02G 1.83 GiB
[ 5.040661] mmcblk0: p1 p2 p3
[ 6.847039] Adding 9767516k swap on /dev/sda3. Priority:-1
extents:1 across:9767516k
[ 6.987841] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.647889] kjournald starting. Commit interval 5 seconds
[ 13.654619] EXT3-fs (dm-0): using internal journal
[ 13.659490] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 15.143077] eth0: Freescale FEC PHY driver [Generic PHY]
(mii_bus:phy_addr=1:00, irq=-1)
[ 17.140873] PHY: 1:00 - Link is Up - 100/Full
[ 17.329274] kjournald starting. Commit interval 5 seconds
[ 17.335840] EXT3-fs (dm-3): using internal journal
[ 17.340799] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 33.313977] sshd (855): /proc/855/oom_adj is deprecated, please use
/proc/855/oom_score_adj instead.
[ 3867.337774] kjournald starting. Commit interval 5 seconds
[ 3867.344328] EXT3-fs (dm-7): using internal journal
[ 3867.349195] EXT3-fs (dm-7): mounted filesystem with ordered data mode
[ 3882.857122] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280501
action 0x6 frozen
[ 3882.864931] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3882.870928] ata1: SError: { RecovData UnrecovData Proto 10B8B
BadCRC TrStaTrns }
[ 3882.878367] ata1.00: failed command: READ FPDMA QUEUED
[ 3882.883582] ata1.00: cmd 60/c8:00:d0:8a:c4/00:00:0f:00:00/40 tag 0
ncq 102400 in
[ 3882.883590] res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3882.899063] ata1.00: status: { DRDY }
[ 3882.902802] ata1: hard resetting link
[ 3883.870400] ata1: softreset failed (device not ready)
[ 3883.875515] ata1: applying PMP SRST workaround and retrying
[ 3884.080465] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3884.102097] ata1.00: configured for UDMA/133
[ 3884.106635] ata1: EH complete
[ 3934.010542] ata1.00: exception Emask 0x0 SAct 0xff SErr 0x0 action 0x6 frozen
[ 3934.017759] ata1.00: failed command: READ FPDMA QUEUED
[ 3934.023030] ata1.00: cmd 60/88:00:18:66:c7/00:00:0f:00:00/40 tag 0
ncq 69632 in
[ 3934.023037] res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x4 (timeout)
[ 3934.038014] ata1.00: status: { DRDY }
[ 3934.041769] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.047042] ata1.00: cmd 61/38:08:d8:2c:5a/00:00:12:00:00/40 tag 1
ncq 28672 out
[ 3934.047051] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.062081] ata1.00: status: { DRDY }
[ 3934.065782] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.071103] ata1.00: cmd 61/20:10:90:67:90/00:00:09:00:00/40 tag 2
ncq 16384 out
[ 3934.071113] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.085984] ata1.00: status: { DRDY }
[ 3934.089671] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.094963] ata1.00: cmd 61/08:18:40:a7:8e/00:00:09:00:00/40 tag 3
ncq 4096 out
[ 3934.094971] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.109735] ata1.00: status: { DRDY }
[ 3934.113450] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.118711] ata1.00: cmd 61/08:20:40:27:8f/00:00:09:00:00/40 tag 4
ncq 4096 out
[ 3934.118721] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.133489] ata1.00: status: { DRDY }
[ 3934.137172] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.142457] ata1.00: cmd 61/08:28:40:67:8f/00:00:09:00:00/40 tag 5
ncq 4096 out
[ 3934.142465] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.157251] ata1.00: status: { DRDY }
[ 3934.160972] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.166239] ata1.00: cmd 61/08:30:40:a7:8f/00:00:09:00:00/40 tag 6
ncq 4096 out
[ 3934.166245] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.181013] ata1.00: status: { DRDY }
[ 3934.184700] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.189959] ata1.00: cmd 61/60:38:4a:f3:e1/00:00:02:00:00/40 tag 7
ncq 49152 out
[ 3934.189966] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.204822] ata1.00: status: { DRDY }
[ 3934.208535] ata1: hard resetting link
[ 3935.180443] ata1: softreset failed (device not ready)
[ 3935.185548] ata1: applying PMP SRST workaround and retrying
[ 3935.390417] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3935.412020] ata1.00: configured for UDMA/133
[ 3935.416479] ata1.00: device reported invalid CHS sector 0
[ 3935.421985] ata1.00: device reported invalid CHS sector 0
[ 3935.427424] ata1.00: device reported invalid CHS sector 0
[ 3935.432893] ata1.00: device reported invalid CHS sector 0
[ 3935.438326] ata1.00: device reported invalid CHS sector 0
[ 3935.443788] ata1.00: device reported invalid CHS sector 0
[ 3935.449221] ata1.00: device reported invalid CHS sector 0
[ 3935.454728] ata1: EH complete
[ 3950.155859] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x80500
action 0x6 frozen
[ 3950.163510] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3950.169469] ata1: SError: { UnrecovData Proto 10B8B }
[ 3950.174597] ata1.00: failed command: READ FPDMA QUEUED
[ 3950.179788] ata1.00: cmd 60/00:00:28:97:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3950.179796] res 40/00:04:28:97:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3950.195275] ata1.00: status: { DRDY }
[ 3950.198992] ata1: hard resetting link
[ 3951.380403] ata1: softreset failed (device not ready)
[ 3951.385523] ata1: applying PMP SRST workaround and retrying
[ 3951.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3951.612472] ata1.00: configured for UDMA/133
[ 3951.617042] ata1: EH complete
[ 3952.305676] ata1: limiting SATA link speed to 1.5 Gbps
[ 3952.310994] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280500
action 0x6 frozen
[ 3952.318692] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3952.324685] ata1: SError: { UnrecovData Proto 10B8B BadCRC TrStaTrns }
[ 3952.331283] ata1.00: failed command: READ FPDMA QUEUED
[ 3952.336469] ata1.00: cmd 60/00:00:28:9f:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3952.336477] res 40/00:04:28:9f:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3952.351953] ata1.00: status: { DRDY }
[ 3952.355667] ata1: hard resetting link
[ 3953.360414] ata1: softreset failed (device not ready)
[ 3953.365537] ata1: applying PMP SRST workaround and retrying
[ 3953.570412] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3953.592363] ata1.00: configured for UDMA/133
[ 3953.596938] ata1: EH complete
[ 4479.040495] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 4479.047622] ata1.00: failed command: WRITE FPDMA QUEUED
[ 4479.052947] ata1.00: cmd 61/10:08:4a:f9:e1/00:00:02:00:00/40 tag 1
ncq 8192 out
[ 4479.052955] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 4479.067740] ata1.00: status: { DRDY }
[ 4479.071480] ata1: hard resetting link
[ 4480.040403] ata1: softreset failed (device not ready)
[ 4480.045513] ata1: applying PMP SRST workaround and retrying
[ 4480.250423] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4480.272519] ata1.00: configured for UDMA/133
[ 4480.276866] ata1.00: device reported invalid CHS sector 0
[ 4480.282410] ata1: EH complete
[52367.370517] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x280100
action 0x6 frozen
[52367.378167] ata1.00: irq_stat 0x08000000, interface fatal error
[52367.384188] ata1: SError: { UnrecovData 10B8B BadCRC }
[52367.389366] ata1.00: failed command: READ FPDMA QUEUED
[52367.394582] ata1.00: cmd 60/00:00:fa:c6:36/02:00:00:00:00/40 tag 0
ncq 262144 in
[52367.394592] res 40/00:04:fa:c6:36/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[52367.410065] ata1.00: status: { DRDY }
[52367.413800] ata1: hard resetting link
[52368.380402] ata1: softreset failed (device not ready)
[52368.385506] ata1: applying PMP SRST workaround and retrying
[52368.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52368.612592] ata1.00: configured for UDMA/133
[52368.617347] ata1: EH complete
Best regards,
--
Héctor Orón -.. . -... .. .- -. -.. . ...- . .-.. --- .--. . .-.
WARNING: multiple messages have this Message-ID (diff)
From: hector.oron@gmail.com (Hector Oron)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms
Date: Tue, 6 Sep 2011 09:46:33 +0100 [thread overview]
Message-ID: <CAODfWeHTRuFZtnYZOD-mFonyjBvjhid4=0=a_mYXdjXAOQYejA@mail.gmail.com> (raw)
In-Reply-To: <CAJNCFVLP7gA_7vBjwVNkQaSg8LZ4hROLdNCx8SBVah=F1ptrhQ@mail.gmail.com>
Hi,
2011/9/1 Richard Zhu <richard.zhu@linaro.org>:
> Hi Hector:
> What's happen before "> [ ? ?7.073106] EXT4-fs (sda2): re-mounted.
> Opts: errors=remount-ro"?
Here is my complete dmesg. The system seems to work fine, it is a
1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected
to mx53 LOCO with eSATA-to-SATA cable. I have around a Lacie eSATA
disk which I might attempt to connect.
Linux version 3.1.0-rc3-mx5 (zumbi at enorme) (gcc version 4.4.5 (Debian
4.4.5-8) ) #7 Tue Aug 30 13:17:14 BST 2011
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale MX53 LOCO Board
Ignoring RAM at b0000000-cfffffff (vmalloc region overlap).
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c0461e08, node_mem_map c04b2000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 130048 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: console=ttymxc0,115200 console=tty1
root=/dev/sda2 video=mxcdi1fb:GBR24,XGA di1_primary tve printk.time=1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 514948k/514948k available, 9340k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf4000000 ( 312 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0412000 (4136 kB)
[ 0.000000] .init : 0xc0412000 - 0xc0437000 ( 148 kB)
[ 0.000000] .data : 0xc0438000 - 0xc0462480 ( 170 kB)
[ 0.000000] .bss : 0xc04624a4 - 0xc04b1380 ( 316 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:400
[ 0.000000] TrustZone Interrupt Controller (TZIC) initialized
[ 0.000000] CPU identified as i.MX53, silicon rev 2.1
[ 0.000000] sched_clock: 32 bits at 55MHz, resolution 18ns, wraps
every 77386ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000556] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 0.040182] pid_max: default: 32768 minimum: 301
[ 0.040450] Mount-cache hash table entries: 512
[ 0.041059] CPU: Testing write buffer coherency: ok
[ 0.042459] devtmpfs: initialized
[ 0.044791] print_constraints: dummy:
[ 0.045120] NET: Registered protocol family 16
[ 0.065856] bio: create slab <bio-0> at 0
[ 0.067168] SCSI subsystem initialized
[ 0.067580] libata version 3.00 loaded.
[ 0.067989] usbcore: registered new interface driver usbfs
[ 0.068174] usbcore: registered new interface driver hub
[ 0.068488] usbcore: registered new device driver usb
[ 0.070182] Switching to clocksource mxc_timer1
[ 0.080403] Switched to NOHz mode on CPU #0
[ 0.088737] NET: Registered protocol family 2
[ 0.089034] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.089503] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.089861] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.090067] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.090096] TCP reno registered
[ 0.090128] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.090168] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.090626] NET: Registered protocol family 1
[ 0.091318] RPC: Registered named UNIX socket transport module.
[ 0.091381] RPC: Registered udp transport module.
[ 0.091407] RPC: Registered tcp transport module.
[ 0.091429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.115113] VFS: Disk quotas dquot_6.5.2
[ 0.115483] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.120839] fuse init (API version 7.16)
[ 0.121919] msgmni has been set to 1005
[ 0.122544] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.122618] io scheduler noop registered
[ 0.122646] io scheduler deadline registered
[ 0.122920] io scheduler cfq registered (default)
[ 0.123527] Serial: IMX driver
[ 0.123787] imx21-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX
[ 0.489212] console [ttymxc0] enabled
[ 0.502624] brd: module loaded
[ 0.511401] loop: module loaded
[ 0.515060] nbd: registered device at major 43
[ 0.532271] ahci: SSS flag set, parallel bus scan disabled
[ 0.537878] ahci imx53-ahci.0: AHCI 0001.0100 32 slots 1 ports 3
Gbps 0x1 impl platform mode
[ 0.546452] ahci imx53-ahci.0: flags: ncq sntf stag pm led clo only
pmp pio slum part ccc
[ 0.556008] scsi0 : ahci_platform
[ 0.560052] ata1: SATA max UDMA/133 mmio [mem
0x10000000-0x10000fff] port 0x100 irq 28
[ 0.568788] FEC Ethernet Driver
[ 0.575892] fec_enet_mii_bus: probed
[ 0.580170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.587109] Initializing USB Mass Storage driver...
[ 0.592309] usbcore: registered new interface driver usb-storage
[ 0.598353] USB Mass Storage support registered.
[ 0.603499] mousedev: PS/2 mouse device common for all mice
[ 0.609483] i2c /dev entries driver
[ 0.614322] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled.
timeout=60s (nowayout=0)
[ 0.623615] device-mapper: uevent: version 1.0.3
[ 0.629223] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06)
initialised: dm-devel at redhat.com
[ 0.637827] sdhci: Secure Digital Host Controller Interface driver
[ 0.644080] sdhci: Copyright(c) Pierre Ossman
[ 0.648461] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.654585] mmc0: no vmmc regulator found
[ 0.658808] Registered led device: mmc0::
[ 0.659016] mmc0: SDHCI controller on sdhci-esdhc-imx53.0
[sdhci-esdhc-imx53.0] using DMA
[ 0.667691] mmc1: no vmmc regulator found
[ 0.672020] Registered led device: mmc1::
[ 0.672265] mmc1: SDHCI controller on sdhci-esdhc-imx53.2
[sdhci-esdhc-imx53.2] using DMA
[ 0.681037] usbcore: registered new interface driver usbhid
[ 0.686655] usbhid: USB HID core driver
[ 0.790254] TCP cubic registered
[ 0.793596] NET: Registered protocol family 17
[ 0.798190] Registering the dns_resolver key type
[ 0.803078] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 2
[ 0.813279] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 0.820805] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.863099] mmc0: host does not support reading read-only switch.
assuming write-enable.
[ 0.970967] mmc0: new SD card at address 1234
[ 1.540405] ata1: softreset failed (device not ready)
[ 1.545514] ata1: applying PMP SRST workaround and retrying
[ 1.750408] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.764169] ata1.00: ATA-8: WDC WD10TPVT-00U4RT1, 01.01A01, max UDMA/133
[ 1.770981] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.786154] ata1.00: configured for UDMA/133
[ 1.791272] scsi 0:0:0:0: Direct-Access ATA WDC
WD10TPVT-00U 01.0 PQ: 0 ANSI: 5
[ 1.800460] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 1.808190] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.815016] sd 0:0:0:0: [sda] Write Protect is off
[ 1.819878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.820201] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.856631] sda: sda1 sda2 sda3 sda4
[ 1.863666] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.880189] EXT3-fs (sda2): error: couldn't mount because of
unsupported optional features (240)
[ 1.890482] EXT2-fs (sda2): error: couldn't mount because of
unsupported optional features (240)
[ 1.932146] EXT4-fs (sda2): warning: maximal mount count reached,
running e2fsck is recommended
[ 1.959428] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.967300] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 1.989215] devtmpfs: mounted
[ 1.992660] Freeing init memory: 148K
[ 3.913577] udev[67]: starting version 164
[ 4.877589] mmcblk0: mmc0:1234 SA02G 1.83 GiB
[ 5.040661] mmcblk0: p1 p2 p3
[ 6.847039] Adding 9767516k swap on /dev/sda3. Priority:-1
extents:1 across:9767516k
[ 6.987841] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.647889] kjournald starting. Commit interval 5 seconds
[ 13.654619] EXT3-fs (dm-0): using internal journal
[ 13.659490] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 15.143077] eth0: Freescale FEC PHY driver [Generic PHY]
(mii_bus:phy_addr=1:00, irq=-1)
[ 17.140873] PHY: 1:00 - Link is Up - 100/Full
[ 17.329274] kjournald starting. Commit interval 5 seconds
[ 17.335840] EXT3-fs (dm-3): using internal journal
[ 17.340799] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 33.313977] sshd (855): /proc/855/oom_adj is deprecated, please use
/proc/855/oom_score_adj instead.
[ 3867.337774] kjournald starting. Commit interval 5 seconds
[ 3867.344328] EXT3-fs (dm-7): using internal journal
[ 3867.349195] EXT3-fs (dm-7): mounted filesystem with ordered data mode
[ 3882.857122] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280501
action 0x6 frozen
[ 3882.864931] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3882.870928] ata1: SError: { RecovData UnrecovData Proto 10B8B
BadCRC TrStaTrns }
[ 3882.878367] ata1.00: failed command: READ FPDMA QUEUED
[ 3882.883582] ata1.00: cmd 60/c8:00:d0:8a:c4/00:00:0f:00:00/40 tag 0
ncq 102400 in
[ 3882.883590] res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3882.899063] ata1.00: status: { DRDY }
[ 3882.902802] ata1: hard resetting link
[ 3883.870400] ata1: softreset failed (device not ready)
[ 3883.875515] ata1: applying PMP SRST workaround and retrying
[ 3884.080465] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3884.102097] ata1.00: configured for UDMA/133
[ 3884.106635] ata1: EH complete
[ 3934.010542] ata1.00: exception Emask 0x0 SAct 0xff SErr 0x0 action 0x6 frozen
[ 3934.017759] ata1.00: failed command: READ FPDMA QUEUED
[ 3934.023030] ata1.00: cmd 60/88:00:18:66:c7/00:00:0f:00:00/40 tag 0
ncq 69632 in
[ 3934.023037] res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x4 (timeout)
[ 3934.038014] ata1.00: status: { DRDY }
[ 3934.041769] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.047042] ata1.00: cmd 61/38:08:d8:2c:5a/00:00:12:00:00/40 tag 1
ncq 28672 out
[ 3934.047051] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.062081] ata1.00: status: { DRDY }
[ 3934.065782] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.071103] ata1.00: cmd 61/20:10:90:67:90/00:00:09:00:00/40 tag 2
ncq 16384 out
[ 3934.071113] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.085984] ata1.00: status: { DRDY }
[ 3934.089671] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.094963] ata1.00: cmd 61/08:18:40:a7:8e/00:00:09:00:00/40 tag 3
ncq 4096 out
[ 3934.094971] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.109735] ata1.00: status: { DRDY }
[ 3934.113450] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.118711] ata1.00: cmd 61/08:20:40:27:8f/00:00:09:00:00/40 tag 4
ncq 4096 out
[ 3934.118721] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.133489] ata1.00: status: { DRDY }
[ 3934.137172] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.142457] ata1.00: cmd 61/08:28:40:67:8f/00:00:09:00:00/40 tag 5
ncq 4096 out
[ 3934.142465] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.157251] ata1.00: status: { DRDY }
[ 3934.160972] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.166239] ata1.00: cmd 61/08:30:40:a7:8f/00:00:09:00:00/40 tag 6
ncq 4096 out
[ 3934.166245] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.181013] ata1.00: status: { DRDY }
[ 3934.184700] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.189959] ata1.00: cmd 61/60:38:4a:f3:e1/00:00:02:00:00/40 tag 7
ncq 49152 out
[ 3934.189966] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.204822] ata1.00: status: { DRDY }
[ 3934.208535] ata1: hard resetting link
[ 3935.180443] ata1: softreset failed (device not ready)
[ 3935.185548] ata1: applying PMP SRST workaround and retrying
[ 3935.390417] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3935.412020] ata1.00: configured for UDMA/133
[ 3935.416479] ata1.00: device reported invalid CHS sector 0
[ 3935.421985] ata1.00: device reported invalid CHS sector 0
[ 3935.427424] ata1.00: device reported invalid CHS sector 0
[ 3935.432893] ata1.00: device reported invalid CHS sector 0
[ 3935.438326] ata1.00: device reported invalid CHS sector 0
[ 3935.443788] ata1.00: device reported invalid CHS sector 0
[ 3935.449221] ata1.00: device reported invalid CHS sector 0
[ 3935.454728] ata1: EH complete
[ 3950.155859] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x80500
action 0x6 frozen
[ 3950.163510] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3950.169469] ata1: SError: { UnrecovData Proto 10B8B }
[ 3950.174597] ata1.00: failed command: READ FPDMA QUEUED
[ 3950.179788] ata1.00: cmd 60/00:00:28:97:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3950.179796] res 40/00:04:28:97:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3950.195275] ata1.00: status: { DRDY }
[ 3950.198992] ata1: hard resetting link
[ 3951.380403] ata1: softreset failed (device not ready)
[ 3951.385523] ata1: applying PMP SRST workaround and retrying
[ 3951.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3951.612472] ata1.00: configured for UDMA/133
[ 3951.617042] ata1: EH complete
[ 3952.305676] ata1: limiting SATA link speed to 1.5 Gbps
[ 3952.310994] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280500
action 0x6 frozen
[ 3952.318692] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3952.324685] ata1: SError: { UnrecovData Proto 10B8B BadCRC TrStaTrns }
[ 3952.331283] ata1.00: failed command: READ FPDMA QUEUED
[ 3952.336469] ata1.00: cmd 60/00:00:28:9f:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3952.336477] res 40/00:04:28:9f:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3952.351953] ata1.00: status: { DRDY }
[ 3952.355667] ata1: hard resetting link
[ 3953.360414] ata1: softreset failed (device not ready)
[ 3953.365537] ata1: applying PMP SRST workaround and retrying
[ 3953.570412] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3953.592363] ata1.00: configured for UDMA/133
[ 3953.596938] ata1: EH complete
[ 4479.040495] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 4479.047622] ata1.00: failed command: WRITE FPDMA QUEUED
[ 4479.052947] ata1.00: cmd 61/10:08:4a:f9:e1/00:00:02:00:00/40 tag 1
ncq 8192 out
[ 4479.052955] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 4479.067740] ata1.00: status: { DRDY }
[ 4479.071480] ata1: hard resetting link
[ 4480.040403] ata1: softreset failed (device not ready)
[ 4480.045513] ata1: applying PMP SRST workaround and retrying
[ 4480.250423] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4480.272519] ata1.00: configured for UDMA/133
[ 4480.276866] ata1.00: device reported invalid CHS sector 0
[ 4480.282410] ata1: EH complete
[52367.370517] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x280100
action 0x6 frozen
[52367.378167] ata1.00: irq_stat 0x08000000, interface fatal error
[52367.384188] ata1: SError: { UnrecovData 10B8B BadCRC }
[52367.389366] ata1.00: failed command: READ FPDMA QUEUED
[52367.394582] ata1.00: cmd 60/00:00:fa:c6:36/02:00:00:00:00/40 tag 0
ncq 262144 in
[52367.394592] res 40/00:04:fa:c6:36/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[52367.410065] ata1.00: status: { DRDY }
[52367.413800] ata1: hard resetting link
[52368.380402] ata1: softreset failed (device not ready)
[52368.385506] ata1: applying PMP SRST workaround and retrying
[52368.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52368.612592] ata1.00: configured for UDMA/133
[52368.617347] ata1: EH complete
Best regards,
--
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.
next prev parent reply other threads:[~2011-09-06 8:46 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-30 9:56 [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms Richard Zhu
2011-08-30 9:56 ` Richard Zhu
2011-08-30 9:56 ` [PATCH V7 2/5] ahci_plt Add the board_ids and pi refer to different features Richard Zhu
2011-08-30 9:56 ` Richard Zhu
2011-08-30 9:56 ` [PATCH V7 3/5] MX53 Enable the AHCI SATA on MX53 ARD board Richard Zhu
2011-08-30 9:56 ` Richard Zhu
2011-08-30 9:56 ` [PATCH V7 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board Richard Zhu
2011-08-30 9:56 ` Richard Zhu
2011-08-30 9:56 ` [PATCH V7 5/5] MX53 Enable the AHCI SATA on MX53 SMD board Richard Zhu
2011-08-30 9:56 ` Richard Zhu
2011-08-30 10:37 ` [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms Wolfram Sang
2011-08-30 10:37 ` Wolfram Sang
2011-08-30 10:43 ` Hector Oron
2011-08-30 10:43 ` Hector Oron
2011-08-31 2:08 ` Richard Zhu
2011-08-31 2:08 ` Richard Zhu
2011-08-31 12:57 ` Hector Oron
2011-08-31 12:57 ` Hector Oron
2011-09-01 3:09 ` Richard Zhu
2011-09-01 3:09 ` Richard Zhu
2011-09-05 18:06 ` Eric Miao
2011-09-05 18:06 ` Eric Miao
2011-09-06 8:46 ` Hector Oron [this message]
2011-09-06 8:46 ` Hector Oron
2011-09-06 13:25 ` Eric Miao
2011-09-06 13:25 ` Eric Miao
2011-09-22 9:30 ` Hector Oron
2011-09-22 9:30 ` Hector Oron
2011-09-22 12:19 ` Eric Miao
2011-09-22 12:19 ` Eric Miao
2011-09-23 8:58 ` Hector Oron
2011-09-23 8:58 ` Hector Oron
2011-09-05 19:25 ` Arnaud Patard
2011-09-05 19:25 ` Arnaud Patard (Rtp)
2011-08-31 3:50 [PATCH V7 0/5] imx53 ahci driver v7 Richard Zhu
2011-08-31 3:50 ` [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms Richard Zhu
2011-08-31 3:50 ` Richard Zhu
2011-08-31 10:03 ` Arnaud Patard
2011-08-31 10:03 ` Arnaud Patard (Rtp)
2011-08-31 11:04 ` Eric Miao
2011-08-31 11:04 ` Eric Miao
2011-09-20 20:30 ` Sascha Hauer
2011-09-20 20:30 ` Sascha Hauer
2011-09-21 5:04 ` Richard Zhu
2011-09-21 5:04 ` Richard Zhu
2011-09-21 7:02 ` Sascha Hauer
2011-09-21 7:02 ` Sascha Hauer
2011-09-21 7:32 ` Shawn Guo
2011-09-21 7:32 ` Shawn Guo
2011-09-21 7:05 ` Richard Zhu
2011-09-21 7:05 ` Richard Zhu
2011-09-22 18:12 ` Jeff Garzik
2011-09-22 18:12 ` Jeff Garzik
2011-09-22 18:31 ` Anton Vorontsov
2011-09-22 18:31 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAODfWeHTRuFZtnYZOD-mFonyjBvjhid4=0=a_mYXdjXAOQYejA@mail.gmail.com' \
--to=hector.oron@gmail.com \
--cc=avorontsov@ru.mvista.com \
--cc=eric.miao@linaro.org \
--cc=eric@eukrea.com \
--cc=jgarzik@pobox.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=richard.zhu@linaro.org \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.