From: Rahul Sharma <r.sh.open@gmail.com>
To: Mike Turquette <mturquette@linaro.org>
Cc: Rahul Sharma <rahul.sharma@samsung.com>,
linux-samsung-soc <linux-samsung-soc@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Kukjin Kim <kgene.kim@samsung.com>,
Inki Dae <inki.dae@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Thomas Abraham <thomas.abraham@linaro.org>,
sunil joshi <joshi@samsung.com>
Subject: Re: [PATCH] clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem
Date: Thu, 29 Aug 2013 08:51:44 +0530 [thread overview]
Message-ID: <CAPdUM4NhW6v5KTk13V7nN+3LM1SUyuXxA5rvos8Z_dhsR8D2JA@mail.gmail.com> (raw)
In-Reply-To: <20130829022407.8231.37926@quantum>
Thanks Mike.
On 29 August 2013 07:54, Mike Turquette <mturquette@linaro.org> wrote:
> Quoting Rahul Sharma (2013-08-23 00:16:59)
>> parent of hdmi and mixer block is mentioned as aclk200 which is
>> not correct. It is clocked by the ouput of aclk200_disp1. Hence
>> parent for mixer and hdmi clocks is changed to aclk200_disp1.
>>
>> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
>
> Taken into clk-next.
>
> Thanks,
> Mike
>
>> ---
>> This set is based on Mike's clk-next branch at
>> https://git.linaro.org/gitweb?p=people/mturquette/linux.git
>>
>> drivers/clk/samsung/clk-exynos5250.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
>> index a9916a4..d90e593 100644
>> --- a/drivers/clk/samsung/clk-exynos5250.c
>> +++ b/drivers/clk/samsung/clk-exynos5250.c
>> @@ -489,8 +489,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
>> GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
>> GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
>> GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
>> - GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
>> - GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
>> + GATE(mixer, "mixer", "mout_aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
>> + GATE(hdmi, "hdmi", "mout_aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
>> GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
>> };
>>
>> --
>> 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: r.sh.open@gmail.com (Rahul Sharma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem
Date: Thu, 29 Aug 2013 08:51:44 +0530 [thread overview]
Message-ID: <CAPdUM4NhW6v5KTk13V7nN+3LM1SUyuXxA5rvos8Z_dhsR8D2JA@mail.gmail.com> (raw)
In-Reply-To: <20130829022407.8231.37926@quantum>
Thanks Mike.
On 29 August 2013 07:54, Mike Turquette <mturquette@linaro.org> wrote:
> Quoting Rahul Sharma (2013-08-23 00:16:59)
>> parent of hdmi and mixer block is mentioned as aclk200 which is
>> not correct. It is clocked by the ouput of aclk200_disp1. Hence
>> parent for mixer and hdmi clocks is changed to aclk200_disp1.
>>
>> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
>
> Taken into clk-next.
>
> Thanks,
> Mike
>
>> ---
>> This set is based on Mike's clk-next branch at
>> https://git.linaro.org/gitweb?p=people/mturquette/linux.git
>>
>> drivers/clk/samsung/clk-exynos5250.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
>> index a9916a4..d90e593 100644
>> --- a/drivers/clk/samsung/clk-exynos5250.c
>> +++ b/drivers/clk/samsung/clk-exynos5250.c
>> @@ -489,8 +489,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
>> GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
>> GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
>> GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
>> - GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
>> - GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
>> + GATE(mixer, "mixer", "mout_aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
>> + GATE(hdmi, "hdmi", "mout_aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
>> GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
>> };
>>
>> --
>> 1.7.10.4
next prev parent reply other threads:[~2013-08-29 3:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 7:16 [PATCH] clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem Rahul Sharma
2013-08-23 7:16 ` Rahul Sharma
2013-08-29 2:24 ` Mike Turquette
2013-08-29 2:24 ` Mike Turquette
2013-08-29 3:21 ` Rahul Sharma [this message]
2013-08-29 3:21 ` Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPdUM4NhW6v5KTk13V7nN+3LM1SUyuXxA5rvos8Z_dhsR8D2JA@mail.gmail.com \
--to=r.sh.open@gmail.com \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=rahul.sharma@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.