From: Aisheng Dong <aisheng.dong@nxp.com>
To: Jesse Taube <mr.bossman075@gmail.com>, dl-linux-imx <linux-imx@nxp.com>
Cc: "robh+dt@kernel.org" <robh+dt@kernel.org>,
"mturquette@baylibre.com" <mturquette@baylibre.com>,
"sboyd@kernel.org" <sboyd@kernel.org>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>,
"stefan@agner.ch" <stefan@agner.ch>,
"linus.walleij@linaro.org" <linus.walleij@linaro.org>,
"daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>,
"tglx@linutronix.de" <tglx@linutronix.de>,
"arnd@arndb.de" <arnd@arndb.de>,
"olof@lixom.net" <olof@lixom.net>,
"soc@kernel.org" <soc@kernel.org>,
"linux@armlinux.org.uk" <linux@armlinux.org.uk>,
Abel Vesa <abel.vesa@nxp.com>, "dev@lynxeye.de" <dev@lynxeye.de>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
"tharvey@gateworks.com" <tharvey@gateworks.com>,
Leo Li <leoyang.li@nxp.com>,
"sebastian.reichel@collabora.com"
<sebastian.reichel@collabora.com>,
"cniedermaier@dh-electronics.com"
<cniedermaier@dh-electronics.com>,
"clin@suse.com" <clin@suse.com>,
"giulio.benetti@benettiengineering.com"
<giulio.benetti@benettiengineering.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: RE: [PATCH v2 12/15] pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
Date: Mon, 9 May 2022 11:12:55 +0000 [thread overview]
Message-ID: <DB9PR04MB84770B71ECC558297AFD2FC780C69@DB9PR04MB8477.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20220428214838.1040278-13-Mr.Bossman075@gmail.com>
> From: Jesse Taube <mr.bossman075@gmail.com>
> Sent: Friday, April 29, 2022 5:49 AM
>
> Add the pinctrl driver support for i.MXRT1170.
>
> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
> ---
> V1 -> V2:
> - Nothing done
> ---
> drivers/pinctrl/freescale/Kconfig | 7 +
> drivers/pinctrl/freescale/Makefile | 1 +
> drivers/pinctrl/freescale/pinctrl-imxrt1170.c | 349 ++++++++++++++++++
> 3 files changed, 357 insertions(+)
> create mode 100644 drivers/pinctrl/freescale/pinctrl-imxrt1170.c
>
> diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
> index 21fa21c6547b..15af3d80e119 100644
> --- a/drivers/pinctrl/freescale/Kconfig
> +++ b/drivers/pinctrl/freescale/Kconfig
> @@ -192,3 +192,10 @@ config PINCTRL_IMX23 config PINCTRL_IMX28
> bool
> select PINCTRL_MXS
> +
> +config PINCTRL_IMXRT1170
> + bool "IMXRT1170 pinctrl driver"
> + depends on ARCH_MXC
Should it be better SOC_IMXRT?
Otherwise:
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Regards
Aisheng
WARNING: multiple messages have this Message-ID (diff)
From: Aisheng Dong <aisheng.dong@nxp.com>
To: Jesse Taube <mr.bossman075@gmail.com>, dl-linux-imx <linux-imx@nxp.com>
Cc: "robh+dt@kernel.org" <robh+dt@kernel.org>,
"mturquette@baylibre.com" <mturquette@baylibre.com>,
"sboyd@kernel.org" <sboyd@kernel.org>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>,
"stefan@agner.ch" <stefan@agner.ch>,
"linus.walleij@linaro.org" <linus.walleij@linaro.org>,
"daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>,
"tglx@linutronix.de" <tglx@linutronix.de>,
"arnd@arndb.de" <arnd@arndb.de>,
"olof@lixom.net" <olof@lixom.net>,
"soc@kernel.org" <soc@kernel.org>,
"linux@armlinux.org.uk" <linux@armlinux.org.uk>,
Abel Vesa <abel.vesa@nxp.com>, "dev@lynxeye.de" <dev@lynxeye.de>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
"tharvey@gateworks.com" <tharvey@gateworks.com>,
Leo Li <leoyang.li@nxp.com>,
"sebastian.reichel@collabora.com"
<sebastian.reichel@collabora.com>,
"cniedermaier@dh-electronics.com"
<cniedermaier@dh-electronics.com>,
"clin@suse.com" <clin@suse.com>,
"giulio.benetti@benettiengineering.com"
<giulio.benetti@benettiengineering.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: RE: [PATCH v2 12/15] pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
Date: Mon, 9 May 2022 11:12:55 +0000 [thread overview]
Message-ID: <DB9PR04MB84770B71ECC558297AFD2FC780C69@DB9PR04MB8477.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20220428214838.1040278-13-Mr.Bossman075@gmail.com>
> From: Jesse Taube <mr.bossman075@gmail.com>
> Sent: Friday, April 29, 2022 5:49 AM
>
> Add the pinctrl driver support for i.MXRT1170.
>
> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
> ---
> V1 -> V2:
> - Nothing done
> ---
> drivers/pinctrl/freescale/Kconfig | 7 +
> drivers/pinctrl/freescale/Makefile | 1 +
> drivers/pinctrl/freescale/pinctrl-imxrt1170.c | 349 ++++++++++++++++++
> 3 files changed, 357 insertions(+)
> create mode 100644 drivers/pinctrl/freescale/pinctrl-imxrt1170.c
>
> diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
> index 21fa21c6547b..15af3d80e119 100644
> --- a/drivers/pinctrl/freescale/Kconfig
> +++ b/drivers/pinctrl/freescale/Kconfig
> @@ -192,3 +192,10 @@ config PINCTRL_IMX23 config PINCTRL_IMX28
> bool
> select PINCTRL_MXS
> +
> +config PINCTRL_IMXRT1170
> + bool "IMXRT1170 pinctrl driver"
> + depends on ARCH_MXC
Should it be better SOC_IMXRT?
Otherwise:
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Regards
Aisheng
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-09 11:13 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-28 21:48 [PATCH v2 00/15] Add support for the i.MXRT1170-evk Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-28 21:48 ` [PATCH v2 01/15] dt-bindings: arm: imx: Add i.MXRT compatible Documentation Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-29 22:37 ` Rob Herring
2022-04-29 22:37 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 02/15] dt-bindings: timer: gpt: " Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-28 21:48 ` [PATCH v2 03/15] dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-05-03 21:42 ` Rob Herring
2022-05-03 21:42 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 04/15] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT1170 compatible Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-29 22:39 ` Rob Herring
2022-04-29 22:39 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 05/15] dt-bindings: serial: fsl-lpuart: " Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-29 22:40 ` Rob Herring
2022-04-29 22:40 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 06/15] dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-05-03 21:43 ` Rob Herring
2022-05-03 21:43 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 07/15] dt-bindings: clock: imx: Add documentation for i.MXRT1170 clock Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-29 15:53 ` Rob Herring
2022-04-29 15:53 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 08/15] ARM: mach-imx: Add support for i.MXRT1170 Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-28 21:48 ` [PATCH v2 09/15] ARM: clk: imx: Update pllv3 to support i.MXRT1170 Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-05-02 9:19 ` Abel Vesa
2022-05-02 9:19 ` Abel Vesa
2022-04-28 21:48 ` [PATCH v2 10/15] dt-bindings: imx: Add clock binding for i.MXRT1170 Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-05-03 21:46 ` Rob Herring
2022-05-03 21:46 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 11/15] clk: imx: Add initial support for i.MXRT1170 clock driver Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-05-02 9:27 ` Abel Vesa
2022-05-02 9:27 ` Abel Vesa
2022-04-28 21:48 ` [PATCH v2 12/15] pinctrl: freescale: Add i.MXRT1170 pinctrl driver support Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-05-04 21:38 ` Linus Walleij
2022-05-04 21:38 ` Linus Walleij
2022-05-05 11:23 ` Jesse Taube
2022-05-05 11:23 ` Jesse Taube
2022-05-05 14:48 ` Linus Walleij
2022-05-05 14:48 ` Linus Walleij
2022-05-09 11:12 ` Aisheng Dong [this message]
2022-05-09 11:12 ` Aisheng Dong
2022-04-28 21:48 ` [PATCH v2 13/15] ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-05-03 21:47 ` Rob Herring
2022-05-03 21:47 ` Rob Herring
2022-04-28 21:48 ` [PATCH v2 14/15] ARM: dts: imx: Add i.MXRT1170-EVK support Jesse Taube
2022-04-28 21:48 ` Jesse Taube
2022-04-28 21:48 ` [PATCH v2 15/15] ARM: imxrt_defconfig: Add i.MXRT1170 Jesse Taube
2022-04-28 21:48 ` Jesse Taube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB9PR04MB84770B71ECC558297AFD2FC780C69@DB9PR04MB8477.eurprd04.prod.outlook.com \
--to=aisheng.dong@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=arnd@arndb.de \
--cc=clin@suse.com \
--cc=cniedermaier@dh-electronics.com \
--cc=daniel.lezcano@linaro.org \
--cc=dev@lynxeye.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=giulio.benetti@benettiengineering.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marcel.ziswiler@toradex.com \
--cc=mr.bossman075@gmail.com \
--cc=mturquette@baylibre.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=shawnguo@kernel.org \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
--cc=tglx@linutronix.de \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.