From: rmk+kernel@armlinux.org.uk (Russell King)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC 08/12] drm/i2c: tda998x: group connector functions and funcs together
Date: Tue, 08 Nov 2016 12:25:37 +0000 [thread overview]
Message-ID: <E1c45T7-0005k1-AB@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20161108122420.GP1041@n2100.armlinux.org.uk>
Group the TDA998x connector functions and funcs structures together
before the encoder support, rather than scattered amongst the rest of
the file. This keeps like code together.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 350 +++++++++++++++++++-------------------
1 file changed, 176 insertions(+), 174 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 6b966c19a449..3f3e1f0137f8 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -820,6 +820,182 @@ tda998x_configure_audio(struct tda998x_priv *priv,
return tda998x_write_aif(priv, ¶ms->cea);
}
+/* DRM connector functions */
+
+static int tda998x_connector_dpms(struct drm_connector *connector, int mode)
+{
+ if (drm_core_check_feature(connector->dev, DRIVER_ATOMIC))
+ return drm_atomic_helper_connector_dpms(connector, mode);
+ else
+ return drm_helper_connector_dpms(connector, mode);
+}
+
+static int tda998x_connector_fill_modes(struct drm_connector *connector,
+ uint32_t maxX, uint32_t maxY)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+ int ret;
+
+ ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+
+ if (connector->edid_blob_ptr) {
+ struct edid *edid = (void *)connector->edid_blob_ptr->data;
+
+ priv->sink_has_audio = drm_detect_monitor_audio(edid);
+ } else {
+ priv->sink_has_audio = false;
+ }
+
+ return ret;
+}
+
+static enum drm_connector_status
+tda998x_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+ u8 val = cec_read(priv, REG_CEC_RXSHPDLEV);
+
+ return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected :
+ connector_status_disconnected;
+}
+
+static void tda998x_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs tda998x_connector_funcs = {
+ .dpms = tda998x_connector_dpms,
+ .reset = drm_atomic_helper_connector_reset,
+ .fill_modes = tda998x_connector_fill_modes,
+ .detect = tda998x_connector_detect,
+ .destroy = tda998x_connector_destroy,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
+{
+ struct tda998x_priv *priv = data;
+ u8 offset, segptr;
+ int ret, i;
+
+ offset = (blk & 1) ? 128 : 0;
+ segptr = blk / 2;
+
+ reg_write(priv, REG_DDC_ADDR, 0xa0);
+ reg_write(priv, REG_DDC_OFFS, offset);
+ reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
+ reg_write(priv, REG_DDC_SEGM, segptr);
+
+ /* enable reading EDID: */
+ priv->wq_edid_wait = 1;
+ reg_write(priv, REG_EDID_CTRL, 0x1);
+
+ /* flag must be cleared by sw: */
+ reg_write(priv, REG_EDID_CTRL, 0x0);
+
+ /* wait for block read to complete: */
+ if (priv->hdmi->irq) {
+ i = wait_event_timeout(priv->wq_edid,
+ !priv->wq_edid_wait,
+ msecs_to_jiffies(100));
+ if (i < 0) {
+ dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
+ return i;
+ }
+ } else {
+ for (i = 100; i > 0; i--) {
+ msleep(1);
+ ret = reg_read(priv, REG_INT_FLAGS_2);
+ if (ret < 0)
+ return ret;
+ if (ret & INT_FLAGS_2_EDID_BLK_RD)
+ break;
+ }
+ }
+
+ if (i == 0) {
+ dev_err(&priv->hdmi->dev, "read edid timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
+ if (ret != length) {
+ dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
+ blk, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tda998x_connector_get_modes(struct drm_connector *connector)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+ struct edid *edid;
+ int n;
+
+ /*
+ * If we get killed while waiting for the HPD timeout, return
+ * no modes found: we are not in a restartable path, so we
+ * can't handle signals gracefully.
+ */
+ if (tda998x_edid_delay_wait(priv))
+ return 0;
+
+ if (priv->rev == TDA19988)
+ reg_clear(priv, REG_TX4, TX4_PD_RAM);
+
+ edid = drm_do_get_edid(connector, read_edid_block, priv);
+
+ if (priv->rev == TDA19988)
+ reg_set(priv, REG_TX4, TX4_PD_RAM);
+
+ if (!edid) {
+ dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
+ return 0;
+ }
+
+ drm_mode_connector_update_edid_property(connector, edid);
+ n = drm_add_edid_modes(connector, edid);
+ drm_edid_to_eld(connector, edid);
+
+ kfree(edid);
+
+ return n;
+}
+
+static int tda998x_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ /* TDA19988 dotclock can go up to 165MHz */
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+
+ if (mode->clock > ((priv->rev == TDA19988) ? 165000 : 150000))
+ return MODE_CLOCK_HIGH;
+ if (mode->htotal >= BIT(13))
+ return MODE_BAD_HVALUE;
+ if (mode->vtotal >= BIT(11))
+ return MODE_BAD_VVALUE;
+ return MODE_OK;
+}
+
+static struct drm_encoder *
+tda998x_connector_best_encoder(struct drm_connector *connector)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+
+ return &priv->encoder;
+}
+
+static
+const struct drm_connector_helper_funcs tda998x_connector_helper_funcs = {
+ .get_modes = tda998x_connector_get_modes,
+ .mode_valid = tda998x_connector_mode_valid,
+ .best_encoder = tda998x_connector_best_encoder,
+};
+
/* DRM encoder functions */
static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
@@ -855,21 +1031,6 @@ static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
priv->dpms = mode;
}
-static int tda998x_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- /* TDA19988 dotclock can go up to 165MHz */
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
-
- if (mode->clock > ((priv->rev == TDA19988) ? 165000 : 150000))
- return MODE_CLOCK_HIGH;
- if (mode->htotal >= BIT(13))
- return MODE_BAD_HVALUE;
- if (mode->vtotal >= BIT(11))
- return MODE_BAD_VVALUE;
- return MODE_OK;
-}
-
static void
tda998x_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
@@ -1080,127 +1241,6 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
mutex_unlock(&priv->audio_mutex);
}
-static int tda998x_connector_fill_modes(struct drm_connector *connector,
- uint32_t maxX, uint32_t maxY)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
- int ret;
-
- ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
-
- if (connector->edid_blob_ptr) {
- struct edid *edid = (void *)connector->edid_blob_ptr->data;
-
- priv->sink_has_audio = drm_detect_monitor_audio(edid);
- } else {
- priv->sink_has_audio = false;
- }
-
- return ret;
-}
-
-static enum drm_connector_status
-tda998x_connector_detect(struct drm_connector *connector, bool force)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
- u8 val = cec_read(priv, REG_CEC_RXSHPDLEV);
-
- return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected :
- connector_status_disconnected;
-}
-
-static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
-{
- struct tda998x_priv *priv = data;
- u8 offset, segptr;
- int ret, i;
-
- offset = (blk & 1) ? 128 : 0;
- segptr = blk / 2;
-
- reg_write(priv, REG_DDC_ADDR, 0xa0);
- reg_write(priv, REG_DDC_OFFS, offset);
- reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
- reg_write(priv, REG_DDC_SEGM, segptr);
-
- /* enable reading EDID: */
- priv->wq_edid_wait = 1;
- reg_write(priv, REG_EDID_CTRL, 0x1);
-
- /* flag must be cleared by sw: */
- reg_write(priv, REG_EDID_CTRL, 0x0);
-
- /* wait for block read to complete: */
- if (priv->hdmi->irq) {
- i = wait_event_timeout(priv->wq_edid,
- !priv->wq_edid_wait,
- msecs_to_jiffies(100));
- if (i < 0) {
- dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
- return i;
- }
- } else {
- for (i = 100; i > 0; i--) {
- msleep(1);
- ret = reg_read(priv, REG_INT_FLAGS_2);
- if (ret < 0)
- return ret;
- if (ret & INT_FLAGS_2_EDID_BLK_RD)
- break;
- }
- }
-
- if (i == 0) {
- dev_err(&priv->hdmi->dev, "read edid timeout\n");
- return -ETIMEDOUT;
- }
-
- ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
- if (ret != length) {
- dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
- blk, ret);
- return ret;
- }
-
- return 0;
-}
-
-static int tda998x_connector_get_modes(struct drm_connector *connector)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
- struct edid *edid;
- int n;
-
- /*
- * If we get killed while waiting for the HPD timeout, return
- * no modes found: we are not in a restartable path, so we
- * can't handle signals gracefully.
- */
- if (tda998x_edid_delay_wait(priv))
- return 0;
-
- if (priv->rev == TDA19988)
- reg_clear(priv, REG_TX4, TX4_PD_RAM);
-
- edid = drm_do_get_edid(connector, read_edid_block, priv);
-
- if (priv->rev == TDA19988)
- reg_set(priv, REG_TX4, TX4_PD_RAM);
-
- if (!edid) {
- dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
- return 0;
- }
-
- drm_mode_connector_update_edid_property(connector, edid);
- n = drm_add_edid_modes(connector, edid);
- drm_edid_to_eld(connector, edid);
-
- kfree(edid);
-
- return n;
-}
-
static void tda998x_encoder_set_polling(struct tda998x_priv *priv,
struct drm_connector *connector)
{
@@ -1579,44 +1619,6 @@ static const struct drm_encoder_funcs tda998x_encoder_funcs = {
.destroy = tda998x_encoder_destroy,
};
-static struct drm_encoder *
-tda998x_connector_best_encoder(struct drm_connector *connector)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
-
- return &priv->encoder;
-}
-
-static
-const struct drm_connector_helper_funcs tda998x_connector_helper_funcs = {
- .get_modes = tda998x_connector_get_modes,
- .mode_valid = tda998x_connector_mode_valid,
- .best_encoder = tda998x_connector_best_encoder,
-};
-
-static void tda998x_connector_destroy(struct drm_connector *connector)
-{
- drm_connector_cleanup(connector);
-}
-
-static int tda998x_connector_dpms(struct drm_connector *connector, int mode)
-{
- if (drm_core_check_feature(connector->dev, DRIVER_ATOMIC))
- return drm_atomic_helper_connector_dpms(connector, mode);
- else
- return drm_helper_connector_dpms(connector, mode);
-}
-
-static const struct drm_connector_funcs tda998x_connector_funcs = {
- .dpms = tda998x_connector_dpms,
- .reset = drm_atomic_helper_connector_reset,
- .fill_modes = tda998x_connector_fill_modes,
- .detect = tda998x_connector_detect,
- .destroy = tda998x_connector_destroy,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
static void tda998x_set_config(struct tda998x_priv *priv,
const struct tda998x_encoder_params *p)
{
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Russell King <rmk+kernel@armlinux.org.uk>
To: Brian Starkey <brian.starkey@arm.com>,
Liviu Dudau <Liviu.Dudau@arm.com>, Jyri Sarha <jsarha@ti.com>
Cc: linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org
Subject: [PATCH RFC 08/12] drm/i2c: tda998x: group connector functions and funcs together
Date: Tue, 08 Nov 2016 12:25:37 +0000 [thread overview]
Message-ID: <E1c45T7-0005k1-AB@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20161108122420.GP1041@n2100.armlinux.org.uk>
Group the TDA998x connector functions and funcs structures together
before the encoder support, rather than scattered amongst the rest of
the file. This keeps like code together.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 350 +++++++++++++++++++-------------------
1 file changed, 176 insertions(+), 174 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 6b966c19a449..3f3e1f0137f8 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -820,6 +820,182 @@ tda998x_configure_audio(struct tda998x_priv *priv,
return tda998x_write_aif(priv, ¶ms->cea);
}
+/* DRM connector functions */
+
+static int tda998x_connector_dpms(struct drm_connector *connector, int mode)
+{
+ if (drm_core_check_feature(connector->dev, DRIVER_ATOMIC))
+ return drm_atomic_helper_connector_dpms(connector, mode);
+ else
+ return drm_helper_connector_dpms(connector, mode);
+}
+
+static int tda998x_connector_fill_modes(struct drm_connector *connector,
+ uint32_t maxX, uint32_t maxY)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+ int ret;
+
+ ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+
+ if (connector->edid_blob_ptr) {
+ struct edid *edid = (void *)connector->edid_blob_ptr->data;
+
+ priv->sink_has_audio = drm_detect_monitor_audio(edid);
+ } else {
+ priv->sink_has_audio = false;
+ }
+
+ return ret;
+}
+
+static enum drm_connector_status
+tda998x_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+ u8 val = cec_read(priv, REG_CEC_RXSHPDLEV);
+
+ return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected :
+ connector_status_disconnected;
+}
+
+static void tda998x_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs tda998x_connector_funcs = {
+ .dpms = tda998x_connector_dpms,
+ .reset = drm_atomic_helper_connector_reset,
+ .fill_modes = tda998x_connector_fill_modes,
+ .detect = tda998x_connector_detect,
+ .destroy = tda998x_connector_destroy,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
+{
+ struct tda998x_priv *priv = data;
+ u8 offset, segptr;
+ int ret, i;
+
+ offset = (blk & 1) ? 128 : 0;
+ segptr = blk / 2;
+
+ reg_write(priv, REG_DDC_ADDR, 0xa0);
+ reg_write(priv, REG_DDC_OFFS, offset);
+ reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
+ reg_write(priv, REG_DDC_SEGM, segptr);
+
+ /* enable reading EDID: */
+ priv->wq_edid_wait = 1;
+ reg_write(priv, REG_EDID_CTRL, 0x1);
+
+ /* flag must be cleared by sw: */
+ reg_write(priv, REG_EDID_CTRL, 0x0);
+
+ /* wait for block read to complete: */
+ if (priv->hdmi->irq) {
+ i = wait_event_timeout(priv->wq_edid,
+ !priv->wq_edid_wait,
+ msecs_to_jiffies(100));
+ if (i < 0) {
+ dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
+ return i;
+ }
+ } else {
+ for (i = 100; i > 0; i--) {
+ msleep(1);
+ ret = reg_read(priv, REG_INT_FLAGS_2);
+ if (ret < 0)
+ return ret;
+ if (ret & INT_FLAGS_2_EDID_BLK_RD)
+ break;
+ }
+ }
+
+ if (i == 0) {
+ dev_err(&priv->hdmi->dev, "read edid timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
+ if (ret != length) {
+ dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
+ blk, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tda998x_connector_get_modes(struct drm_connector *connector)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+ struct edid *edid;
+ int n;
+
+ /*
+ * If we get killed while waiting for the HPD timeout, return
+ * no modes found: we are not in a restartable path, so we
+ * can't handle signals gracefully.
+ */
+ if (tda998x_edid_delay_wait(priv))
+ return 0;
+
+ if (priv->rev == TDA19988)
+ reg_clear(priv, REG_TX4, TX4_PD_RAM);
+
+ edid = drm_do_get_edid(connector, read_edid_block, priv);
+
+ if (priv->rev == TDA19988)
+ reg_set(priv, REG_TX4, TX4_PD_RAM);
+
+ if (!edid) {
+ dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
+ return 0;
+ }
+
+ drm_mode_connector_update_edid_property(connector, edid);
+ n = drm_add_edid_modes(connector, edid);
+ drm_edid_to_eld(connector, edid);
+
+ kfree(edid);
+
+ return n;
+}
+
+static int tda998x_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ /* TDA19988 dotclock can go up to 165MHz */
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+
+ if (mode->clock > ((priv->rev == TDA19988) ? 165000 : 150000))
+ return MODE_CLOCK_HIGH;
+ if (mode->htotal >= BIT(13))
+ return MODE_BAD_HVALUE;
+ if (mode->vtotal >= BIT(11))
+ return MODE_BAD_VVALUE;
+ return MODE_OK;
+}
+
+static struct drm_encoder *
+tda998x_connector_best_encoder(struct drm_connector *connector)
+{
+ struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
+
+ return &priv->encoder;
+}
+
+static
+const struct drm_connector_helper_funcs tda998x_connector_helper_funcs = {
+ .get_modes = tda998x_connector_get_modes,
+ .mode_valid = tda998x_connector_mode_valid,
+ .best_encoder = tda998x_connector_best_encoder,
+};
+
/* DRM encoder functions */
static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
@@ -855,21 +1031,6 @@ static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
priv->dpms = mode;
}
-static int tda998x_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- /* TDA19988 dotclock can go up to 165MHz */
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
-
- if (mode->clock > ((priv->rev == TDA19988) ? 165000 : 150000))
- return MODE_CLOCK_HIGH;
- if (mode->htotal >= BIT(13))
- return MODE_BAD_HVALUE;
- if (mode->vtotal >= BIT(11))
- return MODE_BAD_VVALUE;
- return MODE_OK;
-}
-
static void
tda998x_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
@@ -1080,127 +1241,6 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
mutex_unlock(&priv->audio_mutex);
}
-static int tda998x_connector_fill_modes(struct drm_connector *connector,
- uint32_t maxX, uint32_t maxY)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
- int ret;
-
- ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
-
- if (connector->edid_blob_ptr) {
- struct edid *edid = (void *)connector->edid_blob_ptr->data;
-
- priv->sink_has_audio = drm_detect_monitor_audio(edid);
- } else {
- priv->sink_has_audio = false;
- }
-
- return ret;
-}
-
-static enum drm_connector_status
-tda998x_connector_detect(struct drm_connector *connector, bool force)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
- u8 val = cec_read(priv, REG_CEC_RXSHPDLEV);
-
- return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected :
- connector_status_disconnected;
-}
-
-static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
-{
- struct tda998x_priv *priv = data;
- u8 offset, segptr;
- int ret, i;
-
- offset = (blk & 1) ? 128 : 0;
- segptr = blk / 2;
-
- reg_write(priv, REG_DDC_ADDR, 0xa0);
- reg_write(priv, REG_DDC_OFFS, offset);
- reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
- reg_write(priv, REG_DDC_SEGM, segptr);
-
- /* enable reading EDID: */
- priv->wq_edid_wait = 1;
- reg_write(priv, REG_EDID_CTRL, 0x1);
-
- /* flag must be cleared by sw: */
- reg_write(priv, REG_EDID_CTRL, 0x0);
-
- /* wait for block read to complete: */
- if (priv->hdmi->irq) {
- i = wait_event_timeout(priv->wq_edid,
- !priv->wq_edid_wait,
- msecs_to_jiffies(100));
- if (i < 0) {
- dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
- return i;
- }
- } else {
- for (i = 100; i > 0; i--) {
- msleep(1);
- ret = reg_read(priv, REG_INT_FLAGS_2);
- if (ret < 0)
- return ret;
- if (ret & INT_FLAGS_2_EDID_BLK_RD)
- break;
- }
- }
-
- if (i == 0) {
- dev_err(&priv->hdmi->dev, "read edid timeout\n");
- return -ETIMEDOUT;
- }
-
- ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
- if (ret != length) {
- dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
- blk, ret);
- return ret;
- }
-
- return 0;
-}
-
-static int tda998x_connector_get_modes(struct drm_connector *connector)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
- struct edid *edid;
- int n;
-
- /*
- * If we get killed while waiting for the HPD timeout, return
- * no modes found: we are not in a restartable path, so we
- * can't handle signals gracefully.
- */
- if (tda998x_edid_delay_wait(priv))
- return 0;
-
- if (priv->rev == TDA19988)
- reg_clear(priv, REG_TX4, TX4_PD_RAM);
-
- edid = drm_do_get_edid(connector, read_edid_block, priv);
-
- if (priv->rev == TDA19988)
- reg_set(priv, REG_TX4, TX4_PD_RAM);
-
- if (!edid) {
- dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
- return 0;
- }
-
- drm_mode_connector_update_edid_property(connector, edid);
- n = drm_add_edid_modes(connector, edid);
- drm_edid_to_eld(connector, edid);
-
- kfree(edid);
-
- return n;
-}
-
static void tda998x_encoder_set_polling(struct tda998x_priv *priv,
struct drm_connector *connector)
{
@@ -1579,44 +1619,6 @@ static const struct drm_encoder_funcs tda998x_encoder_funcs = {
.destroy = tda998x_encoder_destroy,
};
-static struct drm_encoder *
-tda998x_connector_best_encoder(struct drm_connector *connector)
-{
- struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
-
- return &priv->encoder;
-}
-
-static
-const struct drm_connector_helper_funcs tda998x_connector_helper_funcs = {
- .get_modes = tda998x_connector_get_modes,
- .mode_valid = tda998x_connector_mode_valid,
- .best_encoder = tda998x_connector_best_encoder,
-};
-
-static void tda998x_connector_destroy(struct drm_connector *connector)
-{
- drm_connector_cleanup(connector);
-}
-
-static int tda998x_connector_dpms(struct drm_connector *connector, int mode)
-{
- if (drm_core_check_feature(connector->dev, DRIVER_ATOMIC))
- return drm_atomic_helper_connector_dpms(connector, mode);
- else
- return drm_helper_connector_dpms(connector, mode);
-}
-
-static const struct drm_connector_funcs tda998x_connector_funcs = {
- .dpms = tda998x_connector_dpms,
- .reset = drm_atomic_helper_connector_reset,
- .fill_modes = tda998x_connector_fill_modes,
- .detect = tda998x_connector_detect,
- .destroy = tda998x_connector_destroy,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
static void tda998x_set_config(struct tda998x_priv *priv,
const struct tda998x_encoder_params *p)
{
--
2.7.4
next prev parent reply other threads:[~2016-11-08 12:25 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-08 12:24 [PATCH RFC 00/12] tda998x updates Russell King - ARM Linux
2016-11-08 12:24 ` Russell King - ARM Linux
2016-11-08 12:25 ` [PATCH RFC 01/12] drm/i2c: tda998x: avoid race in tda998x_encoder_mode_set() Russell King
2016-11-08 12:25 ` Russell King
2016-11-18 0:01 ` Russell King - ARM Linux
2016-11-18 0:01 ` Russell King - ARM Linux
2016-11-08 12:25 ` [PATCH RFC 02/12] drm/i2c: tda998x: avoid racy access to mode clock Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 03/12] drm/i2c: tda998x: avoid race when programming audio Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 04/12] drm/i2c: tda998x: only configure infoframes and audio if supported Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 05/12] drm/i2c: tda998x: only enable audio if supported by sink Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 06/12] drm/i2c: tda998x: correct function name in comments Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 07/12] drm/i2c: tda998x: move and rename tda998x_encoder_set_config() Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` Russell King [this message]
2016-11-08 12:25 ` [PATCH RFC 08/12] drm/i2c: tda998x: group connector functions and funcs together Russell King
2016-11-08 12:25 ` [PATCH RFC 09/12] drm/i2c: tda998x: separate connector initialisation Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 10/12] drm/i2c: tda998x: group audio functions together Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 11/12] drm/i2c: tda998x: remove complexity from tda998x_audio_get_eld() Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 12/12] drm/i2c: tda998x: switch to boolean is_on Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 13:19 ` [PATCH RFC 00/12] tda998x updates Robin Murphy
2016-11-08 13:19 ` Robin Murphy
2016-11-08 13:32 ` Russell King - ARM Linux
2016-11-08 13:32 ` Russell King - ARM Linux
2016-11-08 13:34 ` Russell King - ARM Linux
2016-11-08 13:34 ` Russell King - ARM Linux
2016-11-08 15:25 ` Robin Murphy
2016-11-08 15:25 ` Robin Murphy
2016-11-08 15:42 ` Russell King - ARM Linux
2016-11-08 15:42 ` Russell King - ARM Linux
2016-11-08 17:20 ` Jon Medhurst (Tixy)
2016-11-08 17:20 ` Jon Medhurst (Tixy)
2016-11-08 18:24 ` Russell King - ARM Linux
2016-11-08 18:24 ` Russell King - ARM Linux
2016-11-09 11:45 ` Jon Medhurst (Tixy)
2016-11-09 11:45 ` Jon Medhurst (Tixy)
2016-11-09 22:14 ` Russell King - ARM Linux
2016-11-09 22:14 ` Russell King - ARM Linux
2016-11-11 15:10 ` Jyri Sarha
2016-11-11 15:10 ` Jyri Sarha
2016-11-11 15:27 ` Russell King - ARM Linux
2016-11-11 15:27 ` Russell King - ARM Linux
2016-11-11 16:24 ` Jyri Sarha
2016-11-11 16:24 ` Jyri Sarha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1c45T7-0005k1-AB@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.