All of lore.kernel.org
 help / color / mirror / Atom feed
From: Biju Das <biju.das.jz@bp.renesas.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	DRI Development <dri-devel@lists.freedesktop.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Biju Das <biju.das@bp.renesas.com>,
	Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Linux-Renesas <linux-renesas-soc@vger.kernel.org>
Subject: RE: [PATCH 4/6] dt-bindings: gpu: mali-bifrost: Document RZ/G2L support
Date: Mon, 6 Dec 2021 13:47:49 +0000	[thread overview]
Message-ID: <OS0PR01MB5922CE3208E2386321A0347B866D9@OS0PR01MB5922.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <CAMuHMdU+eYymZBQv8xrLKFCzORxmGe==Vc4z5qjxq+2vNfgaAw@mail.gmail.com>

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 4/6] dt-bindings: gpu: mali-bifrost: Document RZ/G2L
> support
> 
> Hi Biju,
> 
> On Fri, Dec 3, 2021 at 12:52 PM Biju Das <biju.das.jz@bp.renesas.com>
> wrote:
> > The Renesas RZ/G2{L, LC} SoC (a.k.a R9A07G044) has a Bifrost Mali-G31
> > GPU, add a compatible string for it.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Thanks for your patch!
> 
> > --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> 
> > @@ -52,7 +64,8 @@ properties:
> >      maxItems: 3
> >
> >    resets:
> > -    maxItems: 2
> > +    minItems: 1
> 
> 2, as before?

OK. Will do. 

> 
> > +    maxItems: 3
> 
> Perhaps you should add reset-names?
Agreed. Will remove max items add reset-names instead ("rst", "axi_rst", "ace_rst")

> 
> >
> >    "#cooling-cells":
> >      const: 2
> > @@ -113,6 +126,21 @@ allOf:
> >          - sram-supply
> >          - power-domains
> >          - power-domain-names
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,r9a07g044-mali
> > +    then:
> > +      properties:
> > +        interrupt-names:
> > +          minItems: 4
> > +        clock-names:
> > +          minItems: 3
> > +      required:
> > +        - clock-names
> > +        - power-domains
> > +        - resets
> 
> reset-names

Ok.

Regards,
Biju
> 
> >      else:
> >        properties:
> >          power-domains:
> 
> The rest looks good to me, but I'm no Mali expert.
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker.
> But when I'm talking to journalists I just say "programmer" or something
> like that.
>                                 -- Linus Torvalds

WARNING: multiple messages have this Message-ID (diff)
From: Biju Das <biju.das.jz@bp.renesas.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	David Airlie <airlied@linux.ie>,
	Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	DRI Development <dri-devel@lists.freedesktop.org>,
	Biju Das <biju.das@bp.renesas.com>,
	Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>
Subject: RE: [PATCH 4/6] dt-bindings: gpu: mali-bifrost: Document RZ/G2L support
Date: Mon, 6 Dec 2021 13:47:49 +0000	[thread overview]
Message-ID: <OS0PR01MB5922CE3208E2386321A0347B866D9@OS0PR01MB5922.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <CAMuHMdU+eYymZBQv8xrLKFCzORxmGe==Vc4z5qjxq+2vNfgaAw@mail.gmail.com>

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 4/6] dt-bindings: gpu: mali-bifrost: Document RZ/G2L
> support
> 
> Hi Biju,
> 
> On Fri, Dec 3, 2021 at 12:52 PM Biju Das <biju.das.jz@bp.renesas.com>
> wrote:
> > The Renesas RZ/G2{L, LC} SoC (a.k.a R9A07G044) has a Bifrost Mali-G31
> > GPU, add a compatible string for it.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Thanks for your patch!
> 
> > --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> 
> > @@ -52,7 +64,8 @@ properties:
> >      maxItems: 3
> >
> >    resets:
> > -    maxItems: 2
> > +    minItems: 1
> 
> 2, as before?

OK. Will do. 

> 
> > +    maxItems: 3
> 
> Perhaps you should add reset-names?
Agreed. Will remove max items add reset-names instead ("rst", "axi_rst", "ace_rst")

> 
> >
> >    "#cooling-cells":
> >      const: 2
> > @@ -113,6 +126,21 @@ allOf:
> >          - sram-supply
> >          - power-domains
> >          - power-domain-names
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,r9a07g044-mali
> > +    then:
> > +      properties:
> > +        interrupt-names:
> > +          minItems: 4
> > +        clock-names:
> > +          minItems: 3
> > +      required:
> > +        - clock-names
> > +        - power-domains
> > +        - resets
> 
> reset-names

Ok.

Regards,
Biju
> 
> >      else:
> >        properties:
> >          power-domains:
> 
> The rest looks good to me, but I'm no Mali expert.
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker.
> But when I'm talking to journalists I just say "programmer" or something
> like that.
>                                 -- Linus Torvalds

  reply	other threads:[~2021-12-06 13:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-03 11:51 [PATCH 0/6] Add Mali-G31 GPU support for RZ/G2L SoC Biju Das
2021-12-03 11:51 ` Biju Das
2021-12-03 11:51 ` [PATCH 1/6] clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro Biju Das
2021-12-06 13:08   ` Geert Uytterhoeven
2021-12-03 11:51 ` [PATCH 2/6] clk: renesas: r9a07g044: Add mux and divider for G clock Biju Das
2021-12-06 13:08   ` Geert Uytterhoeven
2021-12-03 11:51 ` [PATCH 3/6] clk: renesas: r9a07g044: Add GPU clock and reset entries Biju Das
2021-12-06 13:10   ` Geert Uytterhoeven
2021-12-03 11:51 ` [PATCH 4/6] dt-bindings: gpu: mali-bifrost: Document RZ/G2L support Biju Das
2021-12-03 11:51   ` Biju Das
2021-12-06 13:24   ` Geert Uytterhoeven
2021-12-06 13:24     ` Geert Uytterhoeven
2021-12-06 13:47     ` Biju Das [this message]
2021-12-06 13:47       ` Biju Das
2021-12-03 11:51 ` [PATCH 5/6] arm64: dts: renesas: r9a07g044: Add Mali-G31 GPU node Biju Das
2021-12-06 13:30   ` Geert Uytterhoeven
2021-12-03 11:51 ` [PATCH 6/6] arm64: dts: renesas: rzg2l-smarc-som: Add vdd core regulator Biju Das
2021-12-06 13:34   ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=OS0PR01MB5922CE3208E2386321A0347B866D9@OS0PR01MB5922.jpnprd01.prod.outlook.com \
    --to=biju.das.jz@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=airlied@linux.ie \
    --cc=biju.das@bp.renesas.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.