From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: "magnus.damm@gmail.com" <magnus.damm@gmail.com>,
"linux@arm.linux.org.uk" <linux@arm.linux.org.uk>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"horms@verge.net.au" <horms@verge.net.au>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"pawel.moll@arm.com" <pawel.moll@arm.com>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"ijc+devicetree@hellion.org.uk" <ijc+devicetree@hellion.org.uk>,
"galak@codeaurora.org" <galak@codeaurora.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: RE: [PATCH] ARM: dts: porter: add MAX3355 support
Date: Thu, 28 Jan 2016 05:49:22 +0000 [thread overview]
Message-ID: <SG2PR06MB0919D09C1146EAC0681EE109D8DA0@SG2PR06MB0919.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <4506196.xOgpYRO52t@wasted.cogentembedded.com>
Hi,
> From: linux-renesas-soc-owner@vger.kernel.org [mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
> Shtylyov
> Sent: Wednesday, January 27, 2016 7:14 AM
>
> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> are upstream along with the 'extcon' hook in the Renesas USBHS driver, we
> can add MAX3355 device node to the Porter device tree and properly refer
> to it from the USBHS node instead of using "renesas,enable-gpio" property
> which only allowed checking the USB ID pin at the driver probe time; now
> this pin's state can be monitored dynamically!
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
even if I connected/disconnected a usb convert cable (usb micro-ab to A).
Remarks: I confirmed that the usb convert cable worked correctly on other board.
Do I need other settings for this?
- kernel : renesas.git / renesas-devel-20160127-v4.5-rc1 tag + this patch
- config : shmobile_defconfig + EXTCON + MAX3355 + and more
- board : Porter (Y-RCAR-M2-PORTER-A)
- log :
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.5.0-rc1-dirty (shimoda@shimoda-i7-pc) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #45 SMP Thu Jan 28 13:49:08 JST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: Porter
[ 0.000000] Ignoring memory block 0x200000000 - 0x240000000
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c07308c0, node_mem_map ef7f9000
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ef7c0000 s17984 r8192 d22976 u49152
[ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: ignore_loglevel rw root=/dev/nfs ip=dhcp
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1031652K/1048576K available (4928K kernel code, 184K rwdata, 1908K rodata, 308K init, 290K bss, 16924K reserved, 0K cma-reserved, 262144K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06b604c (6841 kB)
[ 0.000000] .init : 0xc06b7000 - 0xc0704000 ( 308 kB)
[ 0.000000] .data : 0xc0704000 - 0xc0732100 ( 185 kB)
[ 0.000000] .bss : 0xc0735000 - 0xc077d9a4 ( 291 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 10.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000004] sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
[ 0.000013] Switching to timer-based delay loop, resolution 100ns
[ 0.000386] Console: colour dummy device 80x30
[ 0.000680] console [tty0] enabled
[ 0.000700] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
[ 0.000723] pid_max: default: 32768 minimum: 301
[ 0.000830] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000845] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001289] CPU: Testing write buffer coherency: ok
[ 0.001474] CPU0: update cpu_capacity 1024
[ 0.001489] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001564] Setting up static identity map for 0x40009000 - 0x40009058
[ 0.002502] Unable to boot CPU1 when MD21 is set
[ 0.002520] CPU1: failed to boot: -524
[ 0.002557] Brought up 1 CPUs
[ 0.002569] SMP: Total of 1 processors activated (20.00 BogoMIPS).
[ 0.002581] CPU: All CPU(s) started in SVC mode.
[ 0.003315] devtmpfs: initialized
[ 0.010845] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.011227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.011504] pinctrl core: initialized pinctrl subsystem
[ 0.012122] NET: Registered protocol family 16
[ 0.012294] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.015038] renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
[ 0.017503] sh-pfc e6060000.pfc: r8a77910_pfc support registered
[ 0.021185] No ATAGs?
[ 0.021207] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.021231] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.041040] gpio-regulator regulator@1: Could not obtain regulator setting GPIOs: -517
[ 0.041139] gpio-regulator regulator@3: Could not obtain regulator setting GPIOs: -517
[ 0.041603] vgaarb: loaded
[ 0.041834] SCSI subsystem initialized
[ 0.042233] libata version 3.00 loaded.
[ 0.042444] usbcore: registered new interface driver usbfs
[ 0.042501] usbcore: registered new interface driver hub
[ 0.042554] usbcore: registered new device driver usb
[ 0.043578] Advanced Linux Sound Architecture Driver Initialized.
[ 0.044815] clocksource: Switched to clocksource arch_sys_counter
[ 0.058596] NET: Registered protocol family 2
[ 0.059004] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.059064] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.059160] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.059204] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.059233] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.059373] NET: Registered protocol family 1
[ 0.060064] RPC: Registered named UNIX socket transport module.
[ 0.060082] RPC: Registered udp transport module.
[ 0.060093] RPC: Registered tcp transport module.
[ 0.060104] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.060127] PCI: CLS 0 bytes, default 64
[ 0.061237] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.062651] NFS: Registering the id_resolver key type
[ 0.062692] Key type id_resolver registered
[ 0.062704] Key type id_legacy registered
[ 0.062729] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.064362] bounce: pool size: 64 pages
[ 0.064431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.064453] io scheduler noop registered
[ 0.064467] io scheduler deadline registered
[ 0.064487] io scheduler cfq registered (default)
[ 0.065525] gpio_rcar e6050000.gpio: driving 32 GPIOs
[ 0.065776] gpio_rcar e6051000.gpio: driving 26 GPIOs
[ 0.066053] gpio_rcar e6052000.gpio: driving 32 GPIOs
[ 0.066328] gpio_rcar e6053000.gpio: driving 32 GPIOs
[ 0.066599] gpio_rcar e6054000.gpio: driving 32 GPIOs
[ 0.066867] gpio_rcar e6055000.gpio: driving 32 GPIOs
[ 0.067155] gpio_rcar e6055400.gpio: driving 32 GPIOs
[ 0.067400] gpio_rcar e6055800.gpio: driving 26 GPIOs
[ 0.067947] pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
[ 0.068104] pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
[ 0.068121] pci_bus 0000:00: root bus resource [io 0xee080000-0xee0810ff]
[ 0.068136] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
[ 0.068150] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.068192] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
[ 0.068218] pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
[ 0.068236] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.068434] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.068461] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.068534] pci 0000:00:01.0: supports D1 D2
[ 0.068548] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.068746] pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.068773] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.068845] pci 0000:00:02.0: supports D1 D2
[ 0.068858] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.069055] PCI: bus0: Fast back to back transfers disabled
[ 0.069072] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.069147] pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
[ 0.069167] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
[ 0.069205] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.069246] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 0.069423] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
[ 0.069564] pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0001:01
[ 0.069580] pci_bus 0001:01: root bus resource [io 0xee0c0000-0xee0c10ff]
[ 0.069594] pci_bus 0001:01: root bus resource [mem 0xee0c0000-0xee0c10ff]
[ 0.069608] pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.069640] pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
[ 0.069663] pci 0001:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
[ 0.069681] pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.069863] pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.069889] pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.069962] pci 0001:01:01.0: supports D1 D2
[ 0.069975] pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.070168] pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.070194] pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.070266] pci 0001:01:02.0: supports D1 D2
[ 0.070279] pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.070476] PCI: bus1: Fast back to back transfers disabled
[ 0.070492] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.070606] pci 0001:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
[ 0.070624] pci 0001:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
[ 0.070660] pci 0001:01:01.0: enabling device (0140 -> 0142)
[ 0.070697] pci 0001:01:02.0: enabling device (0140 -> 0142)
[ 0.070959] PCI host bridge /pcie@fe000000 ranges:
[ 0.070984] IO 0xfe100000..0xfe1fffff -> 0x00000000
[ 0.071003] MEM 0xfe200000..0xfe3fffff -> 0xfe200000
[ 0.071021] MEM 0x30000000..0x37ffffff -> 0x30000000
[ 0.071035] MEM 0x38000000..0x3fffffff -> 0x38000000
[ 0.264153] rcar-pcie fe000000.pcie: PCIe link down
[ 0.278314] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.279574] SuperH (H)SCI(F) driver initialized
[ 0.279919] e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 105, base_baud = 0) is a scif
[ 1.250320] console [ttySC0] enabled
[ 1.254672] [drm] Initialized drm 1.1.0 20060810
[ 1.260004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.266787] [drm] No driver support for vblank timestamp query.
[ 1.273157] rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
[ 1.282277] scsi host0: sata_rcar
[ 1.285888] ata1: SATA max UDMA/133 irq 107
[ 1.290762] renesas_spi e6b10000.spi: DMA available
[ 1.296792] m25p80 spi0.0: s25fl512s (65536 Kbytes)
[ 1.301962] 3 ofpart partitions found on MTD device spi0.0
[ 1.307592] Creating 3 MTD partitions on "spi0.0":
[ 1.312488] 0x000000000000-0x000000040000 : "loader_prg"
[ 1.318859] 0x000000040000-0x000000440000 : "user_prg"
[ 1.325085] 0x000000440000-0x000004000000 : "flash_fs"
[ 1.331277] renesas_spi e6b10000.spi: probed
[ 1.336702] CAN device driver interface
[ 1.341298] rcar_can e6e80000.can: device registered (regs @ f08ea000, IRQ115)
[ 1.349212] libphy: sh_mii: probed
[ 1.355593] sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:89:12, IRQ 106.
[ 1.365356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.372029] ehci-pci: EHCI PCI platform driver
[ 1.376710] ehci-pci 0000:00:02.0: EHCI Host Controller
[ 1.382064] ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 1.389744] ehci-pci 0000:00:02.0: irq 118, io mem 0xee081000
[ 1.414163] ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
[ 1.420696] hub 1-0:1.0: USB hub found
[ 1.424682] hub 1-0:1.0: 1 port detected
[ 1.429078] ehci-pci 0001:01:02.0: EHCI Host Controller
[ 1.434476] ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
[ 1.442122] ehci-pci 0001:01:02.0: irq 119, io mem 0xee0c1000
[ 1.464210] ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
[ 1.470671] hub 2-0:1.0: USB hub found
[ 1.474641] hub 2-0:1.0: 1 port detected
[ 1.478985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.485321] ohci-pci: OHCI PCI platform driver
[ 1.489927] ohci-pci 0000:00:01.0: OHCI PCI host controller
[ 1.495644] ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 3
[ 1.503236] ohci-pci 0000:00:01.0: irq 118, io mem 0xee080000
[ 1.595067] hub 3-0:1.0: USB hub found
[ 1.599015] hub 3-0:1.0: 1 port detected
[ 1.603355] ohci-pci 0001:01:01.0: OHCI PCI host controller
[ 1.609080] ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 4
[ 1.616682] ohci-pci 0001:01:01.0: irq 119, io mem 0xee0c0000
[ 1.704949] hub 4-0:1.0: USB hub found
[ 1.708894] hub 4-0:1.0: 1 port detected
[ 1.714314] mousedev: PS/2 mouse device common for all mice
[ 1.720365] i2c /dev entries driver
[ 1.727969] i2c-rcar e6530000.i2c: probed
[ 1.735107] rcar_thermal e61f0000.thermal: 1 sensor probed
[ 1.741272] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[ 1.746303] sh_mobile_sdhi ee100000.sd: Got WP GPIO
[ 1.751548] ata1: link resume succeeded after 1 retries
[ 1.864182] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.924411] sh_mobile_sdhi ee100000.sd: mmc0 base at 0xee100000 clock rate 97 MHz
[ 1.932452] sh_mobile_sdhi ee160000.sd: Got CD GPIO
[ 2.114316] sh_mobile_sdhi ee160000.sd: mmc1 base at 0xee160000 clock rate 97 MHz
[ 2.122647] usbcore: registered new interface driver usbhid
[ 2.128363] usbhid: USB HID core driver
[ 2.133902] ak4642-codec 2-0012: No cache used with register defaults set!
[ 2.144969] rcar_sound ec500000.sound: probed
[ 2.150032] NET: Registered protocol family 10
[ 2.157203] sit: IPv6 over IPv4 tunneling driver
[ 2.162417] NET: Registered protocol family 17
[ 2.167011] can: controller area network core (rev 20120528 abi 9)
[ 2.173362] NET: Registered protocol family 29
[ 2.177933] can: raw protocol (rev 20120528)
[ 2.182297] can: broadcast manager protocol (rev 20120528 t)
[ 2.188095] can: netlink gateway (rev 20130117) max_hops=1
[ 2.193775] Key type dns_resolver registered
[ 2.198575] Registering SWP/SWPB emulation handler
[ 2.205780] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.212546] [drm] No driver support for vblank timestamp query.
[ 2.219809] rcar-du feb00000.display: No connectors reported connected with modes
[ 2.227488] [drm] Cannot find any crtc or sizes - going 1024x768
[ 2.241025] Console: switching to colour frame buffer device 128x48
[ 2.253463] rcar-du feb00000.display: fb0: frame buffer device
[ 2.259597] [drm] Initialized rcar-du 1.0.0 20130110 on minor 0
[ 2.266760] renesas_usbhs e6590000.usb: transceiver found
[ 2.272488] renesas_usbhs e6590000.usb: gadget probed
[ 2.277780] phy phy-e6590100.usb-phy.1: phy init failed --> -16
[ 2.283893] renesas_usbhs e6590000.usb: probed
[ 2.288492] sh-pfc e6060000.pfc: pin GP_7_23 already requested by ee090000.pci; cannot claim for e6590000.usb
[ 2.298737] sh-pfc e6060000.pfc: pin-247 (e6590000.usb) status -22
[ 2.305124] sh-pfc e6060000.pfc: could not request pin 247 (GP_7_23) from group usb0 on device sh-pfc
[ 2.314734] renesas_usbhs e6590000.usb: Error applying setting, reverse things back
[ 2.322632] renesas_usbhs e6590000.usb: failed to activate default pinctrl state
[ 2.331932] asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
[ 2.341065] hctosys: unable to open rtc device (rtc0)
[ 2.425932] Micrel KSZ8041RNLI ee700000.etherne:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.etherne:01, irq=367)
[ 2.439009] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.358471] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 5.367618] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.384155] Sending DHCP requests ., OK
[ 5.457444] IP-Config: Got DHCP answer from 192.168.44.74, my address is 192.168.44.192
[ 5.468607] IP-Config: Complete:
[ 5.474789] device=eth0, hwaddr=2e:09:0a:00:89:12, ipaddr=192.168.44.192, mask=255.255.255.0, gw=192.168.44.74
[ 5.488457] host=192.168.44.192, domain=shimoda-i7.org, nis-domain=(none)
[ 5.498836] bootserver=192.168.44.74, rootserver=192.168.44.74, rootpath=/var/lib/tftpboot/arm_linux/rootfs/debian/armel-wheezy nameserver0=192.168.44.74
[ 5.519858] SDHI0 VccQ: disabling
[ 5.526303] SDHI2 VccQ: disabling
[ 5.532911] ALSA device list:
[ 5.538917] #0: rsnd-dai.0-ak4642-hifi
[ 5.549703] VFS: Mounted root (nfs filesystem) on device 0:13.
[ 5.558922] devtmpfs: mounted
[ 5.565079] Freeing unused kernel memory: 308K (c06b7000 - c0704000)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 6.398307] udevd[864]: starting version 175
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ 7.434946] random: nonblocking pool is initialized
[ ok ] Activating swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ ok ] Configuring network interfaces...done.
[ ok ] Cleaning up temporary files....
[....] Setting up ALSA...warning: 'alsactl restore' failed with error message 'Found hardware: "rsnd-dai_0-ak46" "" "" "" ""
Hardware is initialized using a generic method
alsactl: set_control:1328: failed to obtain info for control #4 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #5 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #6 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #7 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #8 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #9 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #10 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #11 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #12 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #13 (No such file o[ ok ectory)'...done.
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting system message bus: dbus.
Debian GNU/Linux 7 192.168.44.192 ttySC0
192 login: root
Password:
Last login: Thu Jan 1 00:00:17 UTC 1970 on ttySC0
Linux 192.168.44.192 4.5.0-rc1-dirty #45 SMP Thu Jan 28 13:49:08 JST 2016 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@192:~#
root@192:~# cat /proc/interrupts | grep usb
108: 0 GIC-0 139 Level e6590000.usb
118: 1 GIC-0 140 Level ehci_hcd:usb1, ohci_hcd:usb3
119: 0 GIC-0 145 Level ehci_hcd:usb2, ohci_hcd:usb4
308: 0 e6055000.gpio 31 Edge usb-otg
root@192:~#
root@192:~# cat /proc/interrupts | grep usb
108: 0 GIC-0 139 Level e6590000.usb
118: 1 GIC-0 140 Level ehci_hcd:usb1, ohci_hcd:usb3
119: 0 GIC-0 145 Level ehci_hcd:usb2, ohci_hcd:usb4
308: 0 e6055000.gpio 31 Edge usb-otg
root@192:~#
root@192:~# cd /sys/class/extcon/extcon0
root@192:/sys/class/extcon/extcon0# cat state
USB=1
USB-HOST=0
Best regards,
Yoshihiro Shimoda
WARNING: multiple messages have this Message-ID (diff)
From: yoshihiro.shimoda.uh@renesas.com (Yoshihiro Shimoda)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: porter: add MAX3355 support
Date: Thu, 28 Jan 2016 05:49:22 +0000 [thread overview]
Message-ID: <SG2PR06MB0919D09C1146EAC0681EE109D8DA0@SG2PR06MB0919.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <4506196.xOgpYRO52t@wasted.cogentembedded.com>
Hi,
> From: linux-renesas-soc-owner at vger.kernel.org [mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
> Shtylyov
> Sent: Wednesday, January 27, 2016 7:14 AM
>
> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> are upstream along with the 'extcon' hook in the Renesas USBHS driver, we
> can add MAX3355 device node to the Porter device tree and properly refer
> to it from the USBHS node instead of using "renesas,enable-gpio" property
> which only allowed checking the USB ID pin at the driver probe time; now
> this pin's state can be monitored dynamically!
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
even if I connected/disconnected a usb convert cable (usb micro-ab to A).
Remarks: I confirmed that the usb convert cable worked correctly on other board.
Do I need other settings for this?
- kernel : renesas.git / renesas-devel-20160127-v4.5-rc1 tag + this patch
- config : shmobile_defconfig + EXTCON + MAX3355 + and more
- board : Porter (Y-RCAR-M2-PORTER-A)
- log :
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.5.0-rc1-dirty (shimoda at shimoda-i7-pc) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #45 SMP Thu Jan 28 13:49:08 JST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: Porter
[ 0.000000] Ignoring memory block 0x200000000 - 0x240000000
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c07308c0, node_mem_map ef7f9000
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ef7c0000 s17984 r8192 d22976 u49152
[ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: ignore_loglevel rw root=/dev/nfs ip=dhcp
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1031652K/1048576K available (4928K kernel code, 184K rwdata, 1908K rodata, 308K init, 290K bss, 16924K reserved, 0K cma-reserved, 262144K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06b604c (6841 kB)
[ 0.000000] .init : 0xc06b7000 - 0xc0704000 ( 308 kB)
[ 0.000000] .data : 0xc0704000 - 0xc0732100 ( 185 kB)
[ 0.000000] .bss : 0xc0735000 - 0xc077d9a4 ( 291 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 10.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000004] sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
[ 0.000013] Switching to timer-based delay loop, resolution 100ns
[ 0.000386] Console: colour dummy device 80x30
[ 0.000680] console [tty0] enabled
[ 0.000700] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
[ 0.000723] pid_max: default: 32768 minimum: 301
[ 0.000830] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000845] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001289] CPU: Testing write buffer coherency: ok
[ 0.001474] CPU0: update cpu_capacity 1024
[ 0.001489] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001564] Setting up static identity map for 0x40009000 - 0x40009058
[ 0.002502] Unable to boot CPU1 when MD21 is set
[ 0.002520] CPU1: failed to boot: -524
[ 0.002557] Brought up 1 CPUs
[ 0.002569] SMP: Total of 1 processors activated (20.00 BogoMIPS).
[ 0.002581] CPU: All CPU(s) started in SVC mode.
[ 0.003315] devtmpfs: initialized
[ 0.010845] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.011227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.011504] pinctrl core: initialized pinctrl subsystem
[ 0.012122] NET: Registered protocol family 16
[ 0.012294] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.015038] renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
[ 0.017503] sh-pfc e6060000.pfc: r8a77910_pfc support registered
[ 0.021185] No ATAGs?
[ 0.021207] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.021231] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.041040] gpio-regulator regulator at 1: Could not obtain regulator setting GPIOs: -517
[ 0.041139] gpio-regulator regulator at 3: Could not obtain regulator setting GPIOs: -517
[ 0.041603] vgaarb: loaded
[ 0.041834] SCSI subsystem initialized
[ 0.042233] libata version 3.00 loaded.
[ 0.042444] usbcore: registered new interface driver usbfs
[ 0.042501] usbcore: registered new interface driver hub
[ 0.042554] usbcore: registered new device driver usb
[ 0.043578] Advanced Linux Sound Architecture Driver Initialized.
[ 0.044815] clocksource: Switched to clocksource arch_sys_counter
[ 0.058596] NET: Registered protocol family 2
[ 0.059004] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.059064] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.059160] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.059204] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.059233] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.059373] NET: Registered protocol family 1
[ 0.060064] RPC: Registered named UNIX socket transport module.
[ 0.060082] RPC: Registered udp transport module.
[ 0.060093] RPC: Registered tcp transport module.
[ 0.060104] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.060127] PCI: CLS 0 bytes, default 64
[ 0.061237] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.062651] NFS: Registering the id_resolver key type
[ 0.062692] Key type id_resolver registered
[ 0.062704] Key type id_legacy registered
[ 0.062729] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.064362] bounce: pool size: 64 pages
[ 0.064431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.064453] io scheduler noop registered
[ 0.064467] io scheduler deadline registered
[ 0.064487] io scheduler cfq registered (default)
[ 0.065525] gpio_rcar e6050000.gpio: driving 32 GPIOs
[ 0.065776] gpio_rcar e6051000.gpio: driving 26 GPIOs
[ 0.066053] gpio_rcar e6052000.gpio: driving 32 GPIOs
[ 0.066328] gpio_rcar e6053000.gpio: driving 32 GPIOs
[ 0.066599] gpio_rcar e6054000.gpio: driving 32 GPIOs
[ 0.066867] gpio_rcar e6055000.gpio: driving 32 GPIOs
[ 0.067155] gpio_rcar e6055400.gpio: driving 32 GPIOs
[ 0.067400] gpio_rcar e6055800.gpio: driving 26 GPIOs
[ 0.067947] pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
[ 0.068104] pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
[ 0.068121] pci_bus 0000:00: root bus resource [io 0xee080000-0xee0810ff]
[ 0.068136] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
[ 0.068150] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.068192] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
[ 0.068218] pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
[ 0.068236] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.068434] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.068461] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.068534] pci 0000:00:01.0: supports D1 D2
[ 0.068548] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.068746] pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.068773] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.068845] pci 0000:00:02.0: supports D1 D2
[ 0.068858] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.069055] PCI: bus0: Fast back to back transfers disabled
[ 0.069072] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.069147] pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
[ 0.069167] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
[ 0.069205] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.069246] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 0.069423] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
[ 0.069564] pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0001:01
[ 0.069580] pci_bus 0001:01: root bus resource [io 0xee0c0000-0xee0c10ff]
[ 0.069594] pci_bus 0001:01: root bus resource [mem 0xee0c0000-0xee0c10ff]
[ 0.069608] pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.069640] pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
[ 0.069663] pci 0001:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
[ 0.069681] pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[ 0.069863] pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.069889] pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.069962] pci 0001:01:01.0: supports D1 D2
[ 0.069975] pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.070168] pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
[ 0.070194] pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.070266] pci 0001:01:02.0: supports D1 D2
[ 0.070279] pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.070476] PCI: bus1: Fast back to back transfers disabled
[ 0.070492] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.070606] pci 0001:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
[ 0.070624] pci 0001:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
[ 0.070660] pci 0001:01:01.0: enabling device (0140 -> 0142)
[ 0.070697] pci 0001:01:02.0: enabling device (0140 -> 0142)
[ 0.070959] PCI host bridge /pcie at fe000000 ranges:
[ 0.070984] IO 0xfe100000..0xfe1fffff -> 0x00000000
[ 0.071003] MEM 0xfe200000..0xfe3fffff -> 0xfe200000
[ 0.071021] MEM 0x30000000..0x37ffffff -> 0x30000000
[ 0.071035] MEM 0x38000000..0x3fffffff -> 0x38000000
[ 0.264153] rcar-pcie fe000000.pcie: PCIe link down
[ 0.278314] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.279574] SuperH (H)SCI(F) driver initialized
[ 0.279919] e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 105, base_baud = 0) is a scif
[ 1.250320] console [ttySC0] enabled
[ 1.254672] [drm] Initialized drm 1.1.0 20060810
[ 1.260004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.266787] [drm] No driver support for vblank timestamp query.
[ 1.273157] rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
[ 1.282277] scsi host0: sata_rcar
[ 1.285888] ata1: SATA max UDMA/133 irq 107
[ 1.290762] renesas_spi e6b10000.spi: DMA available
[ 1.296792] m25p80 spi0.0: s25fl512s (65536 Kbytes)
[ 1.301962] 3 ofpart partitions found on MTD device spi0.0
[ 1.307592] Creating 3 MTD partitions on "spi0.0":
[ 1.312488] 0x000000000000-0x000000040000 : "loader_prg"
[ 1.318859] 0x000000040000-0x000000440000 : "user_prg"
[ 1.325085] 0x000000440000-0x000004000000 : "flash_fs"
[ 1.331277] renesas_spi e6b10000.spi: probed
[ 1.336702] CAN device driver interface
[ 1.341298] rcar_can e6e80000.can: device registered (regs @ f08ea000, IRQ115)
[ 1.349212] libphy: sh_mii: probed
[ 1.355593] sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:89:12, IRQ 106.
[ 1.365356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.372029] ehci-pci: EHCI PCI platform driver
[ 1.376710] ehci-pci 0000:00:02.0: EHCI Host Controller
[ 1.382064] ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 1.389744] ehci-pci 0000:00:02.0: irq 118, io mem 0xee081000
[ 1.414163] ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
[ 1.420696] hub 1-0:1.0: USB hub found
[ 1.424682] hub 1-0:1.0: 1 port detected
[ 1.429078] ehci-pci 0001:01:02.0: EHCI Host Controller
[ 1.434476] ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
[ 1.442122] ehci-pci 0001:01:02.0: irq 119, io mem 0xee0c1000
[ 1.464210] ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
[ 1.470671] hub 2-0:1.0: USB hub found
[ 1.474641] hub 2-0:1.0: 1 port detected
[ 1.478985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.485321] ohci-pci: OHCI PCI platform driver
[ 1.489927] ohci-pci 0000:00:01.0: OHCI PCI host controller
[ 1.495644] ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 3
[ 1.503236] ohci-pci 0000:00:01.0: irq 118, io mem 0xee080000
[ 1.595067] hub 3-0:1.0: USB hub found
[ 1.599015] hub 3-0:1.0: 1 port detected
[ 1.603355] ohci-pci 0001:01:01.0: OHCI PCI host controller
[ 1.609080] ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 4
[ 1.616682] ohci-pci 0001:01:01.0: irq 119, io mem 0xee0c0000
[ 1.704949] hub 4-0:1.0: USB hub found
[ 1.708894] hub 4-0:1.0: 1 port detected
[ 1.714314] mousedev: PS/2 mouse device common for all mice
[ 1.720365] i2c /dev entries driver
[ 1.727969] i2c-rcar e6530000.i2c: probed
[ 1.735107] rcar_thermal e61f0000.thermal: 1 sensor probed
[ 1.741272] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[ 1.746303] sh_mobile_sdhi ee100000.sd: Got WP GPIO
[ 1.751548] ata1: link resume succeeded after 1 retries
[ 1.864182] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.924411] sh_mobile_sdhi ee100000.sd: mmc0 base at 0xee100000 clock rate 97 MHz
[ 1.932452] sh_mobile_sdhi ee160000.sd: Got CD GPIO
[ 2.114316] sh_mobile_sdhi ee160000.sd: mmc1 base at 0xee160000 clock rate 97 MHz
[ 2.122647] usbcore: registered new interface driver usbhid
[ 2.128363] usbhid: USB HID core driver
[ 2.133902] ak4642-codec 2-0012: No cache used with register defaults set!
[ 2.144969] rcar_sound ec500000.sound: probed
[ 2.150032] NET: Registered protocol family 10
[ 2.157203] sit: IPv6 over IPv4 tunneling driver
[ 2.162417] NET: Registered protocol family 17
[ 2.167011] can: controller area network core (rev 20120528 abi 9)
[ 2.173362] NET: Registered protocol family 29
[ 2.177933] can: raw protocol (rev 20120528)
[ 2.182297] can: broadcast manager protocol (rev 20120528 t)
[ 2.188095] can: netlink gateway (rev 20130117) max_hops=1
[ 2.193775] Key type dns_resolver registered
[ 2.198575] Registering SWP/SWPB emulation handler
[ 2.205780] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.212546] [drm] No driver support for vblank timestamp query.
[ 2.219809] rcar-du feb00000.display: No connectors reported connected with modes
[ 2.227488] [drm] Cannot find any crtc or sizes - going 1024x768
[ 2.241025] Console: switching to colour frame buffer device 128x48
[ 2.253463] rcar-du feb00000.display: fb0: frame buffer device
[ 2.259597] [drm] Initialized rcar-du 1.0.0 20130110 on minor 0
[ 2.266760] renesas_usbhs e6590000.usb: transceiver found
[ 2.272488] renesas_usbhs e6590000.usb: gadget probed
[ 2.277780] phy phy-e6590100.usb-phy.1: phy init failed --> -16
[ 2.283893] renesas_usbhs e6590000.usb: probed
[ 2.288492] sh-pfc e6060000.pfc: pin GP_7_23 already requested by ee090000.pci; cannot claim for e6590000.usb
[ 2.298737] sh-pfc e6060000.pfc: pin-247 (e6590000.usb) status -22
[ 2.305124] sh-pfc e6060000.pfc: could not request pin 247 (GP_7_23) from group usb0 on device sh-pfc
[ 2.314734] renesas_usbhs e6590000.usb: Error applying setting, reverse things back
[ 2.322632] renesas_usbhs e6590000.usb: failed to activate default pinctrl state
[ 2.331932] asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
[ 2.341065] hctosys: unable to open rtc device (rtc0)
[ 2.425932] Micrel KSZ8041RNLI ee700000.etherne:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.etherne:01, irq=367)
[ 2.439009] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.358471] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 5.367618] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.384155] Sending DHCP requests ., OK
[ 5.457444] IP-Config: Got DHCP answer from 192.168.44.74, my address is 192.168.44.192
[ 5.468607] IP-Config: Complete:
[ 5.474789] device=eth0, hwaddr=2e:09:0a:00:89:12, ipaddr=192.168.44.192, mask=255.255.255.0, gw=192.168.44.74
[ 5.488457] host=192.168.44.192, domain=shimoda-i7.org, nis-domain=(none)
[ 5.498836] bootserver=192.168.44.74, rootserver=192.168.44.74, rootpath=/var/lib/tftpboot/arm_linux/rootfs/debian/armel-wheezy nameserver0=192.168.44.74
[ 5.519858] SDHI0 VccQ: disabling
[ 5.526303] SDHI2 VccQ: disabling
[ 5.532911] ALSA device list:
[ 5.538917] #0: rsnd-dai.0-ak4642-hifi
[ 5.549703] VFS: Mounted root (nfs filesystem) on device 0:13.
[ 5.558922] devtmpfs: mounted
[ 5.565079] Freeing unused kernel memory: 308K (c06b7000 - c0704000)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 6.398307] udevd[864]: starting version 175
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ 7.434946] random: nonblocking pool is initialized
[ ok ] Activating swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ ok ] Configuring network interfaces...done.
[ ok ] Cleaning up temporary files....
[....] Setting up ALSA...warning: 'alsactl restore' failed with error message 'Found hardware: "rsnd-dai_0-ak46" "" "" "" ""
Hardware is initialized using a generic method
alsactl: set_control:1328: failed to obtain info for control #4 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #5 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #6 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #7 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #8 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #9 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #10 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #11 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #12 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #13 (No such file o[ ok ectory)'...done.
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting system message bus: dbus.
Debian GNU/Linux 7 192.168.44.192 ttySC0
192 login: root
Password:
Last login: Thu Jan 1 00:00:17 UTC 1970 on ttySC0
Linux 192.168.44.192 4.5.0-rc1-dirty #45 SMP Thu Jan 28 13:49:08 JST 2016 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root at 192:~#
root at 192:~# cat /proc/interrupts | grep usb
108: 0 GIC-0 139 Level e6590000.usb
118: 1 GIC-0 140 Level ehci_hcd:usb1, ohci_hcd:usb3
119: 0 GIC-0 145 Level ehci_hcd:usb2, ohci_hcd:usb4
308: 0 e6055000.gpio 31 Edge usb-otg
root at 192:~#
root at 192:~# cat /proc/interrupts | grep usb
108: 0 GIC-0 139 Level e6590000.usb
118: 1 GIC-0 140 Level ehci_hcd:usb1, ohci_hcd:usb3
119: 0 GIC-0 145 Level ehci_hcd:usb2, ohci_hcd:usb4
308: 0 e6055000.gpio 31 Edge usb-otg
root at 192:~#
root at 192:~# cd /sys/class/extcon/extcon0
root at 192:/sys/class/extcon/extcon0# cat state
USB=1
USB-HOST=0
Best regards,
Yoshihiro Shimoda
next prev parent reply other threads:[~2016-01-28 5:49 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-08 19:53 [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Sergei Shtylyov
2014-10-08 19:53 ` Sergei Shtylyov
2014-10-08 19:53 ` Sergei Shtylyov
2014-10-08 19:54 ` [PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node Sergei Shtylyov
2014-10-08 19:54 ` Sergei Shtylyov
2014-10-08 19:54 ` Sergei Shtylyov
2014-10-08 19:55 ` [PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB Sergei Shtylyov
2014-10-08 19:55 ` Sergei Shtylyov
2014-10-08 19:55 ` Sergei Shtylyov
2014-10-24 5:09 ` [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Simon Horman
2014-10-24 5:09 ` Simon Horman
2014-10-24 5:09 ` Simon Horman
2014-10-24 5:22 ` Yoshihiro Shimoda
2014-10-24 5:22 ` Yoshihiro Shimoda
2014-10-24 5:22 ` Yoshihiro Shimoda
2015-09-16 23:53 ` [PATCH] ARM: shmobile: r8a7794: add HS-USB DT support Sergei Shtylyov
2015-09-16 23:53 ` Sergei Shtylyov
2015-09-16 23:53 ` Sergei Shtylyov
2015-10-05 3:02 ` Simon Horman
2015-10-05 3:02 ` Simon Horman
2015-10-05 3:02 ` Simon Horman
2015-10-14 19:35 ` [PATCH] ARM: shmobile: porter: " Sergei Shtylyov
2015-10-14 19:35 ` Sergei Shtylyov
2015-10-14 19:35 ` Sergei Shtylyov
2015-10-15 0:18 ` Simon Horman
2015-10-15 0:18 ` Simon Horman
2015-10-15 0:18 ` Simon Horman
2015-10-15 10:27 ` Sergei Shtylyov
2015-10-15 10:27 ` Sergei Shtylyov
2015-10-15 10:27 ` Sergei Shtylyov
2015-10-27 21:03 ` [PATCH] ARM: shmobile: porter: add CAN0 " Sergei Shtylyov
2015-10-27 21:03 ` Sergei Shtylyov
2015-10-27 21:03 ` Sergei Shtylyov
2015-10-27 22:41 ` Simon Horman
2015-10-27 22:41 ` Simon Horman
2015-10-27 22:41 ` Simon Horman
2015-10-27 22:56 ` Sergei Shtylyov
2015-10-27 22:56 ` Sergei Shtylyov
2015-10-27 22:56 ` Sergei Shtylyov
2015-12-24 22:45 ` [PATCH] ARM: shmobile: porter: add DU " Sergei Shtylyov
2015-12-24 22:45 ` Sergei Shtylyov
2015-12-24 22:45 ` Sergei Shtylyov
2015-12-28 5:29 ` Simon Horman
2015-12-28 5:29 ` Simon Horman
2015-12-28 5:29 ` Simon Horman
2015-12-28 14:35 ` Sergei Shtylyov
2015-12-28 14:35 ` Sergei Shtylyov
2015-12-28 14:35 ` Sergei Shtylyov
2015-12-28 21:43 ` Simon Horman
2015-12-28 21:43 ` Simon Horman
2015-12-28 21:43 ` Simon Horman
2016-01-12 23:06 ` [PATCH] ARM: shmobile: silk: " Sergei Shtylyov
2016-01-12 23:06 ` Sergei Shtylyov
2016-01-12 23:06 ` Sergei Shtylyov
2016-01-18 1:41 ` Simon Horman
2016-01-18 1:41 ` Simon Horman
2016-01-18 1:41 ` Simon Horman
2016-01-21 22:36 ` [PATCH] ARM: dts: porter: add sound support Sergei Shtylyov
2016-01-21 22:36 ` Sergei Shtylyov
2016-01-25 0:35 ` Kuninori Morimoto
2016-01-25 0:35 ` Kuninori Morimoto
2016-01-25 0:35 ` Kuninori Morimoto
2016-01-26 0:43 ` Simon Horman
2016-01-26 0:43 ` Simon Horman
2016-01-26 14:31 ` Sergei Shtylyov
2016-01-26 14:31 ` Sergei Shtylyov
2016-01-26 22:14 ` [PATCH] ARM: dts: porter: add MAX3355 support Sergei Shtylyov
2016-01-26 22:14 ` Sergei Shtylyov
2016-01-28 5:49 ` Yoshihiro Shimoda [this message]
2016-01-28 5:49 ` Yoshihiro Shimoda
2016-01-29 20:28 ` Sergei Shtylyov
2016-01-29 20:28 ` Sergei Shtylyov
2016-01-29 20:49 ` Sergei Shtylyov
2016-01-29 20:49 ` Sergei Shtylyov
2016-02-01 11:17 ` Yoshihiro Shimoda
2016-02-01 11:17 ` Yoshihiro Shimoda
2016-02-01 17:54 ` Sergei Shtylyov
2016-02-01 17:54 ` Sergei Shtylyov
2016-02-01 19:00 ` Sergei Shtylyov
2016-02-01 19:00 ` Sergei Shtylyov
2016-02-15 1:45 ` Simon Horman
2016-02-15 1:45 ` Simon Horman
2016-02-15 10:59 ` Sergei Shtylyov
2016-02-15 10:59 ` Sergei Shtylyov
2016-02-11 20:26 ` [PATCH] ARM: dts: silk: add sound support Sergei Shtylyov
2016-02-11 20:26 ` Sergei Shtylyov
2016-02-15 4:56 ` Kuninori Morimoto
2016-02-15 4:56 ` Kuninori Morimoto
2016-02-15 4:56 ` Kuninori Morimoto
2016-02-11 21:49 ` [PATCH] ARM: dts: porter: fix JP3 jumper description Sergei Shtylyov
2016-02-11 21:49 ` Sergei Shtylyov
2016-02-15 4:50 ` Kuninori Morimoto
2016-02-15 4:50 ` Kuninori Morimoto
2016-02-15 4:50 ` Kuninori Morimoto
2016-02-15 21:55 ` Simon Horman
2016-02-15 21:55 ` Simon Horman
2016-02-13 22:26 ` [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node Sergei Shtylyov
2016-02-13 22:26 ` Sergei Shtylyov
2016-02-26 19:43 ` Sergei Shtylyov
2016-02-26 19:43 ` Sergei Shtylyov
2016-03-02 0:47 ` Simon Horman
2016-03-02 0:47 ` Simon Horman
2016-04-13 19:36 ` [PATCH] ARM: dts: silk: add DU pins Sergei Shtylyov
2016-04-13 19:36 ` Sergei Shtylyov
2016-06-17 20:53 ` Sergei Shtylyov
2016-06-17 20:53 ` Sergei Shtylyov
2016-06-20 8:35 ` Simon Horman
2016-06-20 8:35 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=SG2PR06MB0919D09C1146EAC0681EE109D8DA0@SG2PR06MB0919.apcprd06.prod.outlook.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=horms@verge.net.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.