From: Vinod Koul <vkoul@kernel.org>
To: Abel Vesa <abel.vesa@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: Re: [PATCH 05/10] phy: qualcomm: qmp-usb: Add support for SM8550
Date: Thu, 24 Nov 2022 23:26:40 +0530 [thread overview]
Message-ID: <Y3+wWLsqfzDzdJK+@matsya> (raw)
In-Reply-To: <20221116120157.2706810-6-abel.vesa@linaro.org>
On 16-11-22, 14:01, Abel Vesa wrote:
> Add SM8550 specific register layout and table configs.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 171 ++++++++++++++++++++++++
> 1 file changed, 171 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> index 55029ea63f73..4f8941913fe1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> @@ -1216,6 +1216,145 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_usb_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> };
>
> +static const struct qmp_phy_init_tbl sm8550_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0xC0),
lower case please, here and everywhere else
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x41),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x41),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0x25),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x5C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x5C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xC0),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x1A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0x25),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1, 0xB6),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4B),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC, 0x0C),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x1F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0xF5),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_3, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_5, 0x5F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_TX_PI_QEC_CTRL, 0x21, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_TX_PI_QEC_CTRL, 0x05, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN, 0x2F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN2, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE, 0xA0),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL, 0x0E),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xDC),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1D),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DCC_CTRL1, 0x0C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VTH_CODE, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_CTRL1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08),
> +
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3F, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xBF, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xFF, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xDF, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xED, 1),
> +
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_LOW, 0xBF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xBF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xBF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xDF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xFD, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1, 0xC4),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xE7),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_CDR_RESET_TIME, 0x0A),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0C),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4B),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xF8),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> +};
> +
> static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
> QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> @@ -1531,6 +1670,12 @@ static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
> "aux", "ref_clk_src", "com_aux"
> };
>
> +static const char * const qmp_v4_sm8550_clk_l[] = {
> + "aux_clk", "pipe_clk", "pipe_clk_mux",
> + "pipe_clk_ext_src", "ref_clk_src",
> + "ref_clk", "com_aux_clk"
> +};
> +
> /* usb3 phy on sdx55 doesn't have com_aux clock */
> static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
> "aux", "cfg_ahb", "ref"
> @@ -1919,6 +2064,29 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> .has_pwrdn_delay = true,
> };
>
> +static const struct qmp_phy_cfg sm8550_usb3_uniphy_cfg = {
> + .lanes = 2,
> +
> + .serdes_tbl = sm8550_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8550_usb3_serdes_tbl),
> + .tx_tbl = sm8550_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8550_usb3_tx_tbl),
> + .rx_tbl = sm8550_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8550_usb3_rx_tbl),
> + .pcs_tbl = sm8550_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_tbl),
> + .pcs_usb_tbl = sm8550_usb3_pcs_usb_tbl,
> + .pcs_usb_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_usb_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x1000,
> +};
> +
> static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> .lanes = 2,
>
> @@ -2643,6 +2811,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
> }, {
> .compatible = "qcom,sm8450-qmp-usb3-phy",
> .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8550-qmp-usb3-phy",
> + .data = &sm8550_usb3_uniphy_cfg,
> },
> { },
> };
> --
> 2.34.1
--
~Vinod
WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Abel Vesa <abel.vesa@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: Re: [PATCH 05/10] phy: qualcomm: qmp-usb: Add support for SM8550
Date: Thu, 24 Nov 2022 23:26:40 +0530 [thread overview]
Message-ID: <Y3+wWLsqfzDzdJK+@matsya> (raw)
In-Reply-To: <20221116120157.2706810-6-abel.vesa@linaro.org>
On 16-11-22, 14:01, Abel Vesa wrote:
> Add SM8550 specific register layout and table configs.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 171 ++++++++++++++++++++++++
> 1 file changed, 171 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> index 55029ea63f73..4f8941913fe1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> @@ -1216,6 +1216,145 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_usb_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> };
>
> +static const struct qmp_phy_init_tbl sm8550_usb3_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0xC0),
lower case please, here and everywhere else
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x41),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x41),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0x25),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x5C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x5C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xC0),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x1A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0x55),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0x75),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0x25),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1, 0xB6),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4B),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3, 0x37),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC, 0x0C),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_TX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_RX, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x1F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0xF5),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_3, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_5, 0x5F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RCV_DETECT_LVL_2, 0x12),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_TX_PI_QEC_CTRL, 0x21, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_TX_PI_QEC_CTRL, 0x05, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN, 0x2F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW, 0xFF),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_PI_CONTROLS, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN2, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE, 0xA0),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL1, 0x54),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x13),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0F),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0A),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CNTRL, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL, 0x0E),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xDC),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1D),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x09),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_EN_TIMER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DCC_CTRL1, 0x0C),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VTH_CODE, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_CTRL1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08),
> +
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3F, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xBF, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xFF, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xDF, 1),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xED, 1),
> +
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_LOW, 0xBF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xBF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xBF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xDF, 2),
> + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xFD, 2),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1, 0xC4),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1, 0x21),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RX_SIGDET_LVL, 0x99),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xE7),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_CDR_RESET_TIME, 0x0A),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0C),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4B),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xF8),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> +};
> +
> static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
> QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
> QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> @@ -1531,6 +1670,12 @@ static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
> "aux", "ref_clk_src", "com_aux"
> };
>
> +static const char * const qmp_v4_sm8550_clk_l[] = {
> + "aux_clk", "pipe_clk", "pipe_clk_mux",
> + "pipe_clk_ext_src", "ref_clk_src",
> + "ref_clk", "com_aux_clk"
> +};
> +
> /* usb3 phy on sdx55 doesn't have com_aux clock */
> static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
> "aux", "cfg_ahb", "ref"
> @@ -1919,6 +2064,29 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> .has_pwrdn_delay = true,
> };
>
> +static const struct qmp_phy_cfg sm8550_usb3_uniphy_cfg = {
> + .lanes = 2,
> +
> + .serdes_tbl = sm8550_usb3_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8550_usb3_serdes_tbl),
> + .tx_tbl = sm8550_usb3_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8550_usb3_tx_tbl),
> + .rx_tbl = sm8550_usb3_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8550_usb3_rx_tbl),
> + .pcs_tbl = sm8550_usb3_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_tbl),
> + .pcs_usb_tbl = sm8550_usb3_pcs_usb_tbl,
> + .pcs_usb_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_usb_tbl),
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x1000,
> +};
> +
> static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> .lanes = 2,
>
> @@ -2643,6 +2811,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
> }, {
> .compatible = "qcom,sm8450-qmp-usb3-phy",
> .data = &sm8350_usb3phy_cfg,
> + }, {
> + .compatible = "qcom,sm8550-qmp-usb3-phy",
> + .data = &sm8550_usb3_uniphy_cfg,
> },
> { },
> };
> --
> 2.34.1
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2022-11-24 17:56 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-16 12:01 [PATCH 00/10] phy: qualcomm: Add support for SM8550 Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-16 12:01 ` [PATCH 01/10] phy: qcom-qmp: qserdes-com: Add v6 register offsets Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-24 17:54 ` Vinod Koul
2022-11-24 17:54 ` Vinod Koul
2022-11-16 12:01 ` [PATCH 02/10] dt-bindings: phy: Add QMP UFS PHY comptible for SM8550 Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-16 13:46 ` Johan Hovold
2022-11-16 13:46 ` Johan Hovold
2022-11-16 12:01 ` [PATCH 03/10] phy: qcom-qmp-ufs: Add SM8550 support Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-17 15:36 ` kernel test robot
2022-11-17 15:36 ` kernel test robot
2022-11-24 17:55 ` Vinod Koul
2022-11-24 17:55 ` Vinod Koul
2022-11-16 12:01 ` [PATCH 04/10] dt-bindings: phy: qcom,qmp-usb: Document SM8550 compatible Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-16 13:46 ` Johan Hovold
2022-11-16 13:46 ` Johan Hovold
2023-01-23 10:19 ` Johan Hovold
2023-01-23 10:19 ` Johan Hovold
2023-01-23 10:48 ` Abel Vesa
2023-01-23 10:48 ` Abel Vesa
2023-01-23 10:49 ` Johan Hovold
2023-01-23 10:49 ` Johan Hovold
2022-11-16 12:01 ` [PATCH 05/10] phy: qualcomm: qmp-usb: Add support for SM8550 Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-17 16:17 ` kernel test robot
2022-11-17 16:17 ` kernel test robot
2022-11-24 17:56 ` Vinod Koul [this message]
2022-11-24 17:56 ` Vinod Koul
2022-11-16 12:01 ` [PATCH 06/10] dt-bindings: phy: qcom,qmp-pcie: Document SM8550 compatible Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-16 13:47 ` Johan Hovold
2022-11-16 13:47 ` Johan Hovold
2022-11-16 12:01 ` [PATCH 07/10] phy: qualcomm: qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2023-01-01 20:15 ` Dmitry Baryshkov
2023-01-01 20:15 ` Dmitry Baryshkov
2023-01-17 13:57 ` Abel Vesa
2023-01-17 13:57 ` Abel Vesa
2023-01-17 14:08 ` Dmitry Baryshkov
2023-01-17 14:08 ` Dmitry Baryshkov
2022-11-16 12:01 ` [PATCH 08/10] dt-bindings: phy: Add qcom,snps-eusb2-phy schema file Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-16 15:29 ` Rob Herring
2022-11-16 15:29 ` Rob Herring
2022-11-16 15:44 ` Rob Herring
2022-11-16 15:44 ` Rob Herring
2022-11-16 12:01 ` [PATCH 09/10] phy: qualcomm: Add QCOM SNPS eUSB2 driver Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-24 18:01 ` Vinod Koul
2022-11-24 18:01 ` Vinod Koul
2022-11-16 12:01 ` [PATCH 10/10] phy: qualcomm: phy-qcom-snps-eusb2: Add support for eUSB2 repeater Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-17 1:43 ` kernel test robot
2022-11-17 1:43 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y3+wWLsqfzDzdJK+@matsya \
--to=vkoul@kernel.org \
--cc=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.