From: Bjorn Andersson <bjorn.andersson@linaro.org> To: Douglas Anderson <dianders@chromium.org> Cc: Andrzej Hajda <a.hajda@samsung.com>, Neil Armstrong <narmstrong@baylibre.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Jonas Karlman <jonas@kwiboo.se>, Sam Ravnborg <sam@ravnborg.org>, Linus W <linus.walleij@linaro.org>, robdclark@chromium.org, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>, Steev Klimaszewski <steev@kali.org>, linux-arm-msm@vger.kernel.org, Thierry Reding <treding@nvidia.com>, Lyude Paul <lyude@redhat.com>, dri-devel@lists.freedesktop.org, Stephen Boyd <swboyd@chromium.org>, Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v9 11/11] arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip Date: Wed, 9 Jun 2021 10:27:04 -0500 [thread overview] Message-ID: <YMDdyEzCpdttQyNu@builder.lan> (raw) In-Reply-To: <20210607100234.v9.11.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid> On Mon 07 Jun 12:05 CDT 2021, Douglas Anderson wrote: > Putting the panel under the bridge chip (under the aux-bus node) > allows the panel driver to get access to the DP AUX bus, enabling all > sorts of fabulous new features. > > While we're at this, get rid of a level of hierarchy for the panel > node. It doesn't need "ports / port" and can just have a "port" child. > > For Linux, this patch has a hard requirement on the patches adding DP > AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch > ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus"). > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > Acked-by: Linus Walleij <linus.walleij@linaro.org> In case you want to merge this together with the driver changes (even though there's no direct need for them to go together): Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > > (no changes since v7) > > Changes in v7: > - Panel now under bridge chip instead of getting a link to ddc-i2c > > arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 30 ++++++++++---------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi > index 24d293ef56d7..c76afd857b54 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi > @@ -260,21 +260,6 @@ max98357a: audio-codec-0 { > #sound-dai-cells = <0>; > }; > > - panel: panel { > - /* Compatible will be filled in per-board */ > - power-supply = <&pp3300_dx_edp>; > - backlight = <&backlight>; > - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; > - > - ports { > - port { > - panel_in_edp: endpoint { > - remote-endpoint = <&sn65dsi86_out>; > - }; > - }; > - }; > - }; > - > pwmleds { > compatible = "pwm-leds"; > keyboard_backlight: keyboard-backlight { > @@ -674,6 +659,21 @@ sn65dsi86_out: endpoint { > }; > }; > }; > + > + aux-bus { > + panel: panel { > + /* Compatible will be filled in per-board */ > + power-supply = <&pp3300_dx_edp>; > + backlight = <&backlight>; > + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; > + > + port { > + panel_in_edp: endpoint { > + remote-endpoint = <&sn65dsi86_out>; > + }; > + }; > + }; > + }; > }; > }; > > -- > 2.32.0.rc1.229.g3e70b5a671-goog >
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org> To: Douglas Anderson <dianders@chromium.org> Cc: robdclark@chromium.org, devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, Jonas Karlman <jonas@kwiboo.se>, linux-arm-msm@vger.kernel.org, Neil Armstrong <narmstrong@baylibre.com>, linux-kernel@vger.kernel.org, Steev Klimaszewski <steev@kali.org>, Stephen Boyd <swboyd@chromium.org>, Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>, Andrzej Hajda <a.hajda@samsung.com>, Andy Gross <agross@kernel.org>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Rob Herring <robh+dt@kernel.org>, Thierry Reding <treding@nvidia.com>, Sam Ravnborg <sam@ravnborg.org> Subject: Re: [PATCH v9 11/11] arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip Date: Wed, 9 Jun 2021 10:27:04 -0500 [thread overview] Message-ID: <YMDdyEzCpdttQyNu@builder.lan> (raw) In-Reply-To: <20210607100234.v9.11.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid> On Mon 07 Jun 12:05 CDT 2021, Douglas Anderson wrote: > Putting the panel under the bridge chip (under the aux-bus node) > allows the panel driver to get access to the DP AUX bus, enabling all > sorts of fabulous new features. > > While we're at this, get rid of a level of hierarchy for the panel > node. It doesn't need "ports / port" and can just have a "port" child. > > For Linux, this patch has a hard requirement on the patches adding DP > AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch > ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus"). > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > Acked-by: Linus Walleij <linus.walleij@linaro.org> In case you want to merge this together with the driver changes (even though there's no direct need for them to go together): Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > > (no changes since v7) > > Changes in v7: > - Panel now under bridge chip instead of getting a link to ddc-i2c > > arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 30 ++++++++++---------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi > index 24d293ef56d7..c76afd857b54 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi > @@ -260,21 +260,6 @@ max98357a: audio-codec-0 { > #sound-dai-cells = <0>; > }; > > - panel: panel { > - /* Compatible will be filled in per-board */ > - power-supply = <&pp3300_dx_edp>; > - backlight = <&backlight>; > - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; > - > - ports { > - port { > - panel_in_edp: endpoint { > - remote-endpoint = <&sn65dsi86_out>; > - }; > - }; > - }; > - }; > - > pwmleds { > compatible = "pwm-leds"; > keyboard_backlight: keyboard-backlight { > @@ -674,6 +659,21 @@ sn65dsi86_out: endpoint { > }; > }; > }; > + > + aux-bus { > + panel: panel { > + /* Compatible will be filled in per-board */ > + power-supply = <&pp3300_dx_edp>; > + backlight = <&backlight>; > + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; > + > + port { > + panel_in_edp: endpoint { > + remote-endpoint = <&sn65dsi86_out>; > + }; > + }; > + }; > + }; > }; > }; > > -- > 2.32.0.rc1.229.g3e70b5a671-goog >
next prev parent reply other threads:[~2021-06-09 15:27 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-07 17:05 [PATCH v9 00/11] drm: Fix EDID reading on ti-sn65dsi86 by introducing the DP AUX bus Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-07 17:05 ` [PATCH v9 01/11] dt-bindings: display: simple: List hpd properties in panel-simple Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-07 17:05 ` [PATCH v9 02/11] dt-bindings: drm: Introduce the DP AUX bus Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-09 11:05 ` Linus Walleij 2021-06-09 11:05 ` Linus Walleij 2021-06-07 17:05 ` [PATCH v9 03/11] dt-bindings: drm/bridge: ti-sn65dsi86: Add aux-bus child Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-09 11:05 ` Linus Walleij 2021-06-09 11:05 ` Linus Walleij 2021-06-07 17:05 ` [PATCH v9 04/11] drm: Introduce the DP AUX bus Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-11 16:48 ` Lyude Paul 2021-06-11 16:48 ` Lyude Paul 2021-06-07 17:05 ` [PATCH v9 05/11] drm/panel: panel-simple: Allow panel-simple be a DP AUX endpoint device Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-07 17:05 ` [PATCH v9 06/11] drm/panel: panel-simple: Stash DP AUX bus; allow using it for DDC Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-09 11:07 ` Linus Walleij 2021-06-09 11:07 ` Linus Walleij 2021-06-07 17:05 ` [PATCH v9 07/11] drm/bridge: ti-sn65dsi86: Promote the AUX channel to its own sub-dev Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-09 11:08 ` Linus Walleij 2021-06-09 11:08 ` Linus Walleij 2021-06-07 17:05 ` [PATCH v9 08/11] drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-07 17:05 ` [PATCH v9 09/11] drm/bridge: ti-sn65dsi86: Don't read EDID blob over DDC Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-07 17:05 ` [PATCH v9 10/11] drm/bridge: ti-sn65dsi86: Improve probe errors with dev_err_probe() Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-09 11:09 ` Linus Walleij 2021-06-09 11:09 ` Linus Walleij 2021-06-07 17:05 ` [PATCH v9 11/11] arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip Douglas Anderson 2021-06-07 17:05 ` Douglas Anderson 2021-06-09 15:27 ` Bjorn Andersson [this message] 2021-06-09 15:27 ` Bjorn Andersson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=YMDdyEzCpdttQyNu@builder.lan \ --to=bjorn.andersson@linaro.org \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=agross@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jonas@kwiboo.se \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lyude@redhat.com \ --cc=maarten.lankhorst@linux.intel.com \ --cc=narmstrong@baylibre.com \ --cc=robdclark@chromium.org \ --cc=robh+dt@kernel.org \ --cc=sam@ravnborg.org \ --cc=stanislav.lisovskiy@intel.com \ --cc=steev@kali.org \ --cc=swboyd@chromium.org \ --cc=treding@nvidia.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.