[PATCH V2 3/4] drm/panel: Add prepare_upstream_first flag to drm_panel

From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>, Jonas Karlman <jonas@kwiboo.se>,
	Robert Foss <robert.foss@linaro.org>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Douglas Anderson <dianders@chromium.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	andrzej.hajda@gmail.com,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH V2 3/4] drm/panel: Add prepare_upstream_first flag to drm_panel
Date: Fri,  4 Mar 2022 15:17:58 +0000	[thread overview]
Message-ID: <a593a187fe3e6fc1ca5bf3db001ed87457e3d4ee.1646406653.git.dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <cover.1646406653.git.dave.stevenson@raspberrypi.com>
In-Reply-To: <cover.1646406653.git.dave.stevenson@raspberrypi.com>

Mapping to the drm_bridge flag pre_enable_upstream_first,
add a new flag prepare_upstream_first to drm_panel to allow
the panel driver to request that the upstream bridge should
be pre_enabled before the panel prepare.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/bridge/panel.c |  3 +++
 include/drm/drm_panel.h        | 10 ++++++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
index 5be057575183..2ea08b3ba326 100644
--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -234,6 +234,9 @@ struct drm_bridge *drm_panel_bridge_add_typed(struct drm_panel *panel,
 	panel_bridge->bridge.ops = DRM_BRIDGE_OP_MODES;
 	panel_bridge->bridge.type = connector_type;
 
+	panel_bridge->bridge.pre_enable_upstream_first =
+						panel->prepare_upstream_first;
+
 	drm_bridge_add(&panel_bridge->bridge);
 
 	return &panel_bridge->bridge;
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 1ba2d424a53f..c0f39dfbd071 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -179,6 +179,16 @@ struct drm_panel {
 	 * Panel entry in registry.
 	 */
 	struct list_head list;
+
+	/**
+	 * @prepare_upstream_first:
+	 *
+	 * The upstream controller should be prepared first, before the prepare
+	 * for the panel is called. This is largely required for DSI panels
+	 * where the DSI host controller should be initialised to LP-11 before
+	 * the panel is powered up.
+	 */
+	bool prepare_upstream_first;
 };
 
 void drm_panel_init(struct drm_panel *panel, struct device *dev,
-- 
2.7.4

