From: "H. Nikolaus Schaller" <hns@goldelico.com> To: Paul Cercueil <paul@crapouillou.net>, Paul Boddie <paul@boddie.org.uk>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Ralf Baechle <ralf@linux-mips.org>, Paul Burton <paulburton@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Andi Kleen <ak@linux.intel.com>, Krzysztof Kozlowski <krzk@kernel.org>, Geert Uytterhoeven <geert+renesas@glider.be>, "Eric W. Biederman" <ebiederm@xmission.com>, "H. Nikolaus Schaller" <hns@goldelico.com>, Miquel Raynal <miquel.raynal@bootlin.com>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>, Kees Cook <keescook@chromium.org> Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, linux-gpio@vger.kernel.org, letux-kernel@openphoenux.org, mips-creator-ci20-dev@googlegroups.com, Rob Herring <robh@kernel.org> Subject: [RFC v3 1/8] dt-bindings: display: convert ingenic,lcd.txt to ingenic,lcd.yaml Date: Sun, 29 Mar 2020 19:35:47 +0200 [thread overview] Message-ID: <a75c77fa8528f44832993f9780ae4ea409125a90.1585503354.git.hns@goldelico.com> (raw) In-Reply-To: <cover.1585503354.git.hns@goldelico.com> and add compatible: jz4780-lcd, including an example how to configure both lcd controllers. Also fix the clock names and examples. Based on work by Paul Cercueil <paul@crapouillou.net> and Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org --- .../bindings/display/ingenic,lcd.txt | 45 ------ .../bindings/display/ingenic,lcd.yaml | 128 ++++++++++++++++++ 2 files changed, 128 insertions(+), 45 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.txt create mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.yaml diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.txt b/Documentation/devicetree/bindings/display/ingenic,lcd.txt deleted file mode 100644 index 01e3261defb6..000000000000 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.txt +++ /dev/null @@ -1,45 +0,0 @@ -Ingenic JZ47xx LCD driver - -Required properties: -- compatible: one of: - * ingenic,jz4740-lcd - * ingenic,jz4725b-lcd - * ingenic,jz4770-lcd -- reg: LCD registers location and length -- clocks: LCD pixclock and device clock specifiers. - The device clock is only required on the JZ4740. -- clock-names: "lcd_pclk" and "lcd" -- interrupts: Specifies the interrupt line the LCD controller is connected to. - -Example: - -panel { - compatible = "sharp,ls020b1dd01d"; - - backlight = <&backlight>; - power-supply = <&vcc>; - - port { - panel_input: endpoint { - remote-endpoint = <&panel_output>; - }; - }; -}; - - -lcd: lcd-controller@13050000 { - compatible = "ingenic,jz4725b-lcd"; - reg = <0x13050000 0x1000>; - - interrupt-parent = <&intc>; - interrupts = <31>; - - clocks = <&cgu JZ4725B_CLK_LCD>; - clock-names = "lcd"; - - port { - panel_output: endpoint { - remote-endpoint = <&panel_input>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml new file mode 100644 index 000000000000..8b6467cfc191 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Ingenic JZ4780 LCD Controller + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +description: | + LCD Controller is the Display Controller for the Ingenic JZ47xx SoC + +properties: + compatible: + oneOf: + - const: ingenic,jz4725b-lcd + - const: ingenic,jz4740-lcd + - const: ingenic,jz4770-lcd + - const: ingenic,jz4780-lcd + + reg: + maxItems: 1 + description: LCD registers location and length + + interrupts: + maxItems: 1 + description: Specifies the interrupt provided by parent + + clocks: + maxItems: 2 + description: Clock specifiers for LCD pixclock and device clock. + The device clock is only required on the JZ4740 and JZ4780 + + clock-names: + items: + - const: lcd + - const: lcd_pclk + + port: + type: object + description: | + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4725b-cgu.h> + + panel { + compatible = "sharp,ls020b1dd01d"; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + + lcd: lcd-controller@13050000 { + compatible = "ingenic,jz4725b-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4725B_CLK_LCD>; + clock-names = "lcd", "lcd_pclk"; + + port { + panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + + - | + #include <dt-bindings/clock/jz4780-cgu.h> + + lcdc0: lcdc0@13050000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x13050000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <31>; + + jz4780_lcd_out: port { + #address-cells = <1>; + #size-cells = <0>; + + jz4780_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_lcd>; + }; + }; + }; + + lcdc1: lcdc1@130a0000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x130a0000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <31>; + + status = "disabled"; + }; + +... -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: "H. Nikolaus Schaller" <hns@goldelico.com> To: Paul Cercueil <paul@crapouillou.net>, Paul Boddie <paul@boddie.org.uk>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Ralf Baechle <ralf@linux-mips.org>, Paul Burton <paulburton@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Andi Kleen <ak@linux.intel.com>, Krzysztof Kozlowski <krzk@kernel.org>, Geert Uytterhoeven <geert+renesas@glider.be>, "Eric W. Biederman" <ebiederm@xmission.com>, "H. Nikolaus Schaller" <hns@goldelico.com>, Miquel Raynal <miquel.raynal@bootlin.com>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>, Kees Cook <keescook@chromium.org> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-mips@vger.kernel.org, linux-gpio@vger.kernel.org, mips-creator-ci20-dev@googlegroups.com, letux-kernel@openphoenux.org Subject: [RFC v3 1/8] dt-bindings: display: convert ingenic, lcd.txt to ingenic, lcd.yaml Date: Sun, 29 Mar 2020 19:35:47 +0200 [thread overview] Message-ID: <a75c77fa8528f44832993f9780ae4ea409125a90.1585503354.git.hns@goldelico.com> (raw) In-Reply-To: <cover.1585503354.git.hns@goldelico.com> and add compatible: jz4780-lcd, including an example how to configure both lcd controllers. Also fix the clock names and examples. Based on work by Paul Cercueil <paul@crapouillou.net> and Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org --- .../bindings/display/ingenic,lcd.txt | 45 ------ .../bindings/display/ingenic,lcd.yaml | 128 ++++++++++++++++++ 2 files changed, 128 insertions(+), 45 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.txt create mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.yaml diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.txt b/Documentation/devicetree/bindings/display/ingenic,lcd.txt deleted file mode 100644 index 01e3261defb6..000000000000 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.txt +++ /dev/null @@ -1,45 +0,0 @@ -Ingenic JZ47xx LCD driver - -Required properties: -- compatible: one of: - * ingenic,jz4740-lcd - * ingenic,jz4725b-lcd - * ingenic,jz4770-lcd -- reg: LCD registers location and length -- clocks: LCD pixclock and device clock specifiers. - The device clock is only required on the JZ4740. -- clock-names: "lcd_pclk" and "lcd" -- interrupts: Specifies the interrupt line the LCD controller is connected to. - -Example: - -panel { - compatible = "sharp,ls020b1dd01d"; - - backlight = <&backlight>; - power-supply = <&vcc>; - - port { - panel_input: endpoint { - remote-endpoint = <&panel_output>; - }; - }; -}; - - -lcd: lcd-controller@13050000 { - compatible = "ingenic,jz4725b-lcd"; - reg = <0x13050000 0x1000>; - - interrupt-parent = <&intc>; - interrupts = <31>; - - clocks = <&cgu JZ4725B_CLK_LCD>; - clock-names = "lcd"; - - port { - panel_output: endpoint { - remote-endpoint = <&panel_input>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml new file mode 100644 index 000000000000..8b6467cfc191 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Ingenic JZ4780 LCD Controller + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +description: | + LCD Controller is the Display Controller for the Ingenic JZ47xx SoC + +properties: + compatible: + oneOf: + - const: ingenic,jz4725b-lcd + - const: ingenic,jz4740-lcd + - const: ingenic,jz4770-lcd + - const: ingenic,jz4780-lcd + + reg: + maxItems: 1 + description: LCD registers location and length + + interrupts: + maxItems: 1 + description: Specifies the interrupt provided by parent + + clocks: + maxItems: 2 + description: Clock specifiers for LCD pixclock and device clock. + The device clock is only required on the JZ4740 and JZ4780 + + clock-names: + items: + - const: lcd + - const: lcd_pclk + + port: + type: object + description: | + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4725b-cgu.h> + + panel { + compatible = "sharp,ls020b1dd01d"; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + + lcd: lcd-controller@13050000 { + compatible = "ingenic,jz4725b-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4725B_CLK_LCD>; + clock-names = "lcd", "lcd_pclk"; + + port { + panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + + - | + #include <dt-bindings/clock/jz4780-cgu.h> + + lcdc0: lcdc0@13050000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x13050000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <31>; + + jz4780_lcd_out: port { + #address-cells = <1>; + #size-cells = <0>; + + jz4780_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_lcd>; + }; + }; + }; + + lcdc1: lcdc1@130a0000 { + compatible = "ingenic,jz4780-lcd"; + reg = <0x130a0000 0x1800>; + + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>; + clock-names = "lcd", "lcd_pclk"; + + interrupt-parent = <&intc>; + interrupts = <31>; + + status = "disabled"; + }; + +... -- 2.25.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-03-29 17:36 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-29 17:35 [RFC v3 0/8] MIPS: CI20: add HDMI out support H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller [this message] 2020-03-29 17:35 ` [RFC v3 1/8] dt-bindings: display: convert ingenic, lcd.txt to ingenic, lcd.yaml H. Nikolaus Schaller 2020-03-30 15:42 ` [RFC v3 1/8] dt-bindings: display: convert ingenic,lcd.txt to ingenic,lcd.yaml Rob Herring 2020-03-30 15:42 ` Rob Herring 2020-03-30 16:33 ` H. Nikolaus Schaller 2020-03-30 16:33 ` [RFC v3 1/8] dt-bindings: display: convert ingenic, lcd.txt to ingenic, lcd.yaml H. Nikolaus Schaller [not found] ` <PGM08Q.HSFQKBTIA4ZJ1@crapouillou.net> [not found] ` <9F25715B-3C06-4302-9393-3440E9D54470@goldelico.com> [not found] ` <9LN08Q.J1LY4QL3MG9B3@crapouillou.net> 2020-03-30 17:18 ` [RFC v3 1/8] dt-bindings: display: convert ingenic,lcd.txt to ingenic,lcd.yaml H. Nikolaus Schaller 2020-04-09 7:25 ` [RFC v3 1/8] dt-bindings: display: convert ingenic, lcd.txt to ingenic, lcd.yaml Sam Ravnborg 2020-04-09 7:25 ` Sam Ravnborg 2020-04-09 7:35 ` H. Nikolaus Schaller 2020-04-09 12:20 ` Sam Ravnborg 2020-04-09 12:20 ` Sam Ravnborg 2020-04-09 12:41 ` H. Nikolaus Schaller 2020-03-29 17:35 ` [RFC v3 2/8] drm: ingenic-drm: add MODULE_DEVICE_TABLE H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller 2020-05-04 1:32 ` Paul Cercueil 2020-05-04 1:32 ` Paul Cercueil 2020-03-29 17:35 ` [RFC v3 3/8] drm: ingenic-drm: add support for ingenic,jz4780-lcd H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller 2020-03-29 17:35 ` [RFC v3 4/8] dt-bindings: display: add ingenic-jz4780-hdmi DT Schema H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller 2020-04-09 7:12 ` Sam Ravnborg 2020-04-09 7:12 ` Sam Ravnborg 2020-03-29 17:35 ` [RFC v3 5/8] drm: ingenic: add jz4780 Synopsys HDMI driver H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller 2020-03-29 17:35 ` [RFC v3 6/8] MIPS: DTS: jz4780: account for Synopsys HDMI driver and LCD controller H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller 2020-03-29 17:35 ` [RFC v3 7/8] MIPS: DTS: CI20: add HDMI setup H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller 2020-03-29 17:35 ` [RFC v3 8/8] MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780 H. Nikolaus Schaller 2020-03-29 17:35 ` H. Nikolaus Schaller
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=a75c77fa8528f44832993f9780ae4ea409125a90.1585503354.git.hns@goldelico.com \ --to=hns@goldelico.com \ --cc=airlied@linux.ie \ --cc=ak@linux.intel.com \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=ebiederm@xmission.com \ --cc=geert+renesas@glider.be \ --cc=keescook@chromium.org \ --cc=krzk@kernel.org \ --cc=letux-kernel@openphoenux.org \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mips-creator-ci20-dev@googlegroups.com \ --cc=miquel.raynal@bootlin.com \ --cc=paul@boddie.org.uk \ --cc=paul@crapouillou.net \ --cc=paulburton@kernel.org \ --cc=ralf@linux-mips.org \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=tsbogend@alpha.franken.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.