All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
	markgross@kernel.org, ilpo.jarvinen@linux.intel.com,
	basavaraj.natikar@amd.com, jikos@kernel.org,
	benjamin.tissoires@redhat.com
Cc: Patil.Reddy@amd.com, mario.limonciello@amd.com,
	platform-driver-x86@vger.kernel.org, linux-input@vger.kernel.org
Subject: Re: [PATCH v7 00/12] Introduce PMF Smart PC Solution Builder Feature
Date: Mon, 18 Dec 2023 13:05:47 +0100	[thread overview]
Message-ID: <a98c0c5a-caab-4cff-85de-b1b43c19b736@redhat.com> (raw)
In-Reply-To: <20231212014705.2017474-1-Shyam-sundar.S-k@amd.com>

Hi,

On 12/12/23 02:46, Shyam Sundar S K wrote:
> Smart PC Solutions Builder allows for OEM to define a large number of
> custom system states to dynamically switch to. The system states are
> referred to as policies, and multiple policies can be loaded onto the
> system at any given time, however only one policy can be active at a
> given time.
> 
> Policy is a combination of PMF input and output capabilities. The inputs
> are the incoming information from the other kernel subsystems like LID
> state, Sensor info, GPU info etc and the actions are the updating the 
> power limits of SMU etc.
> 
> The policy binary is signed and encrypted by a special key from AMD. This
> policy binary shall have the inputs and outputs which the OEMs can build
> for the platform customization that can enhance the user experience and
> system behavior.
> 
> This series adds the initial support for Smart PC solution to PMF driver.
> 
> Note that, on platforms where CnQF and Smart PC is advertised, Smart PC
> shall have higher precedence and same applies for Auto Mode.

Thank you for your patch-series, I've applied the series to my
review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans


> 
> v6->v7:
> ---------
>  - handle buffer free during suspend/resume
>  - Move Smart PC checks within Smart PC init function
>  - realloc a updated buffer size during the side load.
>  - Drop patches from 13/15 to 15/15 of V6 series
> 
> v5->v6:
> ---------
>  - Add Ilpo's and Mario's Reviewed-by tags
>  - Drop 13/17 and 14/17 patches from this series which are GPU centric
>  - Drop separate checks for battery handling.
>  - Handle SFH failure cases
> 
> v4->v5:
> ---------
>  - Remove PMF-GPU interface from amdgpu driver and add DRM/backlight
>    changes within PMF
>  - Add module_softdep for AMDGPU
>  - remove error checks for debugfs_create_file()
>  - Add "Reviewed-by:" tags
>  - Add kerneldoc for kernel-wide headers
>  - Add checks for acpi_backlight_native
>  - Add early return for SFH path
>  - other cosmetic changes
>  
> v3->v4:
> ---------
> - Split v3 9/16 into 2 patches, that addresses using generic fn names
> - Add softdep [Ilpo] instead of request_module()
> - return proper ACPI status [Mario]
> - Update comments in code [Mario]
> - Remove missed double _ remarks
> - handle battery status branches [Ilpo]
> - Address KASAN problems 
> 
> v2->v3:
> ---------
> - Remove pci_get_device() for getting gpu handle
> - add .suspend handler for pmf driver
> - remove unwanted type caste
> - Align comments, spaces etc.
> - add wrapper for print_hex_dump_debug()
> - Remove lkp tags in commit-msg
> - Add macros for magic numbers
> - use right format specifiers for printing
> - propagate error codes back to the caller
> - remove unwanted comments
> 
> v1->v2:
> ---------
> - Remove __func__ macros
> - Remove manual function names inside prints
> - Handle tee_shm_get_va() failure
> - Remove double _
> - Add meaningful prints
> - pass amd_pmf_set_dram_addr() failure errors
> - Add more information to commit messages
> - use right format specifiers
> - use devm_ioremap() instead of ioremap()
> - address unsigned long vs u32 problems
> - Fix lkp reported issues
> - Add amd_pmf_remove_pb() to remove the debugfs files created(if any).
> - Make amd_pmf_open_pb() as static.
> - Add cooling device APIs for controlling amdgpu backlight
> - handle amd_pmf_apply_policies() failures
> - Split v1 14/15 into 2 patches further
> - use linux/units.h for better handling
> - add "depends on" AMD_SFH_HID for interaction with SFH
> - other cosmetic remarks
> 
> Shyam Sundar S K (12):
>   platform/x86/amd/pmf: Add PMF TEE interface
>   platform/x86/amd/pmf: Add support for PMF-TA interaction
>   platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr()
>   platform/x86/amd/pmf: Add support for PMF Policy Binary
>   platform/x86/amd/pmf: change amd_pmf_init_features() call sequence
>   platform/x86/amd/pmf: Add support to get inputs from other subsystems
>   platform/x86/amd/pmf: Add support update p3t limit
>   platform/x86/amd/pmf: Add support to update system state
>   platform/x86/amd/pmf: Make source_as_str() as non-static
>   platform/x86/amd/pmf: Add facility to dump TA inputs
>   platform/x86/amd/pmf: Add capability to sideload of policy binary
>   platform/x86/amd/pmf: dump policy binary data
> 
>  Documentation/admin-guide/index.rst   |   1 +
>  Documentation/admin-guide/pmf.rst     |  24 ++
>  drivers/platform/x86/amd/pmf/Kconfig  |   1 +
>  drivers/platform/x86/amd/pmf/Makefile |   3 +-
>  drivers/platform/x86/amd/pmf/acpi.c   |  37 ++
>  drivers/platform/x86/amd/pmf/core.c   |  52 ++-
>  drivers/platform/x86/amd/pmf/pmf.h    | 203 +++++++++++
>  drivers/platform/x86/amd/pmf/spc.c    | 158 +++++++++
>  drivers/platform/x86/amd/pmf/sps.c    |   5 +-
>  drivers/platform/x86/amd/pmf/tee-if.c | 469 ++++++++++++++++++++++++++
>  10 files changed, 936 insertions(+), 17 deletions(-)
>  create mode 100644 Documentation/admin-guide/pmf.rst
>  create mode 100644 drivers/platform/x86/amd/pmf/spc.c
>  create mode 100644 drivers/platform/x86/amd/pmf/tee-if.c
> 


      parent reply	other threads:[~2023-12-18 12:05 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-12  1:46 [PATCH v7 00/12] Introduce PMF Smart PC Solution Builder Feature Shyam Sundar S K
2023-12-12  1:46 ` [PATCH v7 01/12] platform/x86/amd/pmf: Add PMF TEE interface Shyam Sundar S K
2023-12-12  1:46 ` [PATCH v7 02/12] platform/x86/amd/pmf: Add support for PMF-TA interaction Shyam Sundar S K
2023-12-12  1:46 ` [PATCH v7 03/12] platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr() Shyam Sundar S K
2023-12-12  1:46 ` [PATCH v7 04/12] platform/x86/amd/pmf: Add support for PMF Policy Binary Shyam Sundar S K
2023-12-12  1:46 ` [PATCH v7 05/12] platform/x86/amd/pmf: change amd_pmf_init_features() call sequence Shyam Sundar S K
2023-12-12  1:46 ` [PATCH v7 06/12] platform/x86/amd/pmf: Add support to get inputs from other subsystems Shyam Sundar S K
2023-12-12  1:47 ` [PATCH v7 07/12] platform/x86/amd/pmf: Add support update p3t limit Shyam Sundar S K
2023-12-12  1:47 ` [PATCH v7 08/12] platform/x86/amd/pmf: Add support to update system state Shyam Sundar S K
2023-12-12  1:47 ` [PATCH v7 09/12] platform/x86/amd/pmf: Make source_as_str() as non-static Shyam Sundar S K
2023-12-12  1:47 ` [PATCH v7 10/12] platform/x86/amd/pmf: Add facility to dump TA inputs Shyam Sundar S K
2023-12-12  1:47 ` [PATCH v7 11/12] platform/x86/amd/pmf: Add capability to sideload of policy binary Shyam Sundar S K
2023-12-18 11:58   ` Hans de Goede
2023-12-12  1:47 ` [PATCH v7 12/12] platform/x86/amd/pmf: dump policy binary data Shyam Sundar S K
2023-12-18 12:05 ` Hans de Goede [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a98c0c5a-caab-4cff-85de-b1b43c19b736@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=Patil.Reddy@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=basavaraj.natikar@amd.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.