* divide error in cdc_ncm_update_rxtx_max
@ 2019-09-16 13:29 syzbot
2019-09-17 13:52 ` Bjørn Mork
0 siblings, 1 reply; 5+ messages in thread
From: syzbot @ 2019-09-16 13:29 UTC (permalink / raw)
To: andreyknvl, davem, linux-kernel, linux-usb, netdev, oliver,
syzkaller-bugs
Hello,
syzbot found the following crash on:
HEAD commit: f0df5c1b usb-fuzzer: main usb gadget fuzzer driver
git tree: https://github.com/google/kasan.git usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=14cd1459600000
kernel config: https://syzkaller.appspot.com/x/.config?x=5c6633fa4ed00be5
dashboard link: https://syzkaller.appspot.com/bug?extid=ce366e2b8296e25d84f5
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=12b4dd85600000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=179b7fc1600000
IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com
cdc_ncm 1-1:1.0: dwNtbInMaxSize=0 is too small. Using 2048
cdc_ncm 1-1:1.0: setting rx_max = 2048
cdc_ncm 1-1:1.0: setting tx_max = 16384
divide error: 0000 [#1] SMP KASAN
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:cdc_ncm_update_rxtx_max+0xc6e/0xef0 drivers/net/usb/cdc_ncm.c:419
Code: e0 07 38 c2 0f 9e c1 84 d2 0f 95 c0 84 c1 0f 85 35 02 00 00 0f b7 5b
04 81 e3 ff 07 00 00 e8 29 47 f7 fd 31 d2 44 89 e0 31 ff <f7> f3 41 89 d5
89 d6 e8 86 48 f7 fd 45 85 ed 0f 85 17 f7 ff ff e8
RSP: 0018:ffff8881da20f030 EFLAGS: 00010246
RAX: 0000000000004000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff83469377 RDI: 0000000000000000
RBP: ffff8881c7ba0000 R08: ffff8881da1f9800 R09: ffffed103b645d58
R10: ffffed103b645d57 R11: ffff8881db22eabf R12: 0000000000004000
R13: 0000000000000000 R14: ffff8881d35f3dc0 R15: ffff8881d2a70f00
FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1059879000 CR3: 00000001d49db000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
cdc_ncm_setup drivers/net/usb/cdc_ncm.c:667 [inline]
cdc_ncm_bind_common+0x1005/0x2570 drivers/net/usb/cdc_ncm.c:924
cdc_ncm_bind+0x7c/0x1c0 drivers/net/usb/cdc_ncm.c:1038
usbnet_probe+0xb43/0x23cf drivers/net/usb/usbnet.c:1722
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x6d0 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:721
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:828
bus_for_each_drv+0x162/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:894
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2165
usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
really_probe+0x281/0x6d0 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:721
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:828
bus_for_each_drv+0x162/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:894
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2165
usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
hub_port_connect drivers/usb/core/hub.c:5098 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
port_event drivers/usb/core/hub.c:5359 [inline]
hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
worker_thread+0x96/0xe20 kernel/workqueue.c:2415
kthread+0x318/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Modules linked in:
---[ end trace ab75cc10e099d8e9 ]---
RIP:
---
This bug is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this bug report. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
syzbot can test patches for this bug, for details see:
https://goo.gl/tpsmEJ#testing-patches
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: divide error in cdc_ncm_update_rxtx_max
2019-09-16 13:29 divide error in cdc_ncm_update_rxtx_max syzbot
@ 2019-09-17 13:52 ` Bjørn Mork
2019-09-17 14:09 ` syzbot
0 siblings, 1 reply; 5+ messages in thread
From: Bjørn Mork @ 2019-09-17 13:52 UTC (permalink / raw)
To: syzbot
Cc: andreyknvl, davem, linux-kernel, linux-usb, netdev, oliver,
syzkaller-bugs
[-- Attachment #1: Type: text/plain, Size: 57 bytes --]
#syz test: https://github.com/google/kasan.git f0df5c1b
[-- Attachment #2: 0001-cdc_ncm-fix-divide-error-when-USB-packet-size-is-0.patch --]
[-- Type: text/x-diff, Size: 4937 bytes --]
From dd2eb64899d5e695e5e05c674ecbbc3fce01b4b5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>
Date: Tue, 17 Sep 2019 15:46:03 +0200
Subject: [RFC] cdc_ncm: fix divide error when USB packet size is 0
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
syzbot reported:
cdc_ncm 1-1:1.0: dwNtbInMaxSize=0 is too small. Using 2048
cdc_ncm 1-1:1.0: setting rx_max = 2048
cdc_ncm 1-1:1.0: setting tx_max = 16384
divide error: 0000 [#1] SMP KASAN
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:cdc_ncm_update_rxtx_max+0xc6e/0xef0 drivers/net/usb/cdc_ncm.c:419
Code: e0 07 38 c2 0f 9e c1 84 d2 0f 95 c0 84 c1 0f 85 35 02 00 00 0f
b7 5b 04 81 e3 ff 07 00 00 e8 29 47 f7 fd 31 d2 44 89 e0 31 ff <f7> f3
41 89 d5 89 d6 e8 86 48 f7 fd 45 85 ed 0f 85 17 f7 ff ff e8
RSP: 0018:ffff8881da20f030 EFLAGS: 00010246
RAX: 0000000000004000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff83469377 RDI: 0000000000000000
RBP: ffff8881c7ba0000 R08: ffff8881da1f9800 R09: ffffed103b645d58
R10: ffffed103b645d57 R11: ffff8881db22eabf R12: 0000000000004000
R13: 0000000000000000 R14: ffff8881d35f3dc0 R15: ffff8881d2a70f00
FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1059879000 CR3: 00000001d49db000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
cdc_ncm_setup drivers/net/usb/cdc_ncm.c:667 [inline]
cdc_ncm_bind_common+0x1005/0x2570 drivers/net/usb/cdc_ncm.c:924
cdc_ncm_bind+0x7c/0x1c0 drivers/net/usb/cdc_ncm.c:1038
usbnet_probe+0xb43/0x23cf drivers/net/usb/usbnet.c:1722
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x6d0 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:721
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:828
bus_for_each_drv+0x162/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:894
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2165
usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
really_probe+0x281/0x6d0 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:721
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:828
bus_for_each_drv+0x162/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:894
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2165
usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
hub_port_connect drivers/usb/core/hub.c:5098 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
port_event drivers/usb/core/hub.c:5359 [inline]
hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
worker_thread+0x96/0xe20 kernel/workqueue.c:2415
kthread+0x318/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Modules linked in:
---[ end trace ab75cc10e099d8e9 ]---
Reported-by: syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com
Signed-off-by: Bjørn Mork <bjorn@mork.no>
---
drivers/net/usb/cdc_ncm.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 50c05d0f44cb..029fe9082a8f 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -377,6 +377,7 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
{
struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
u8 iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
+ u16 maxp = usb_maxpacket(dev->udev, dev->out, 1);
u32 val;
val = cdc_ncm_check_rx_max(dev, new_rx);
@@ -411,12 +412,8 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
/* Adding a pad byte here if necessary simplifies the handling
* in cdc_ncm_fill_tx_frame, making tx_max always represent
* the real skb max size.
- *
- * We cannot use dev->maxpacket here because this is called from
- * .bind which is called before usbnet sets up dev->maxpacket
*/
- if (val != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
- val % usb_maxpacket(dev->udev, dev->out, 1) == 0)
+ if (maxp && val != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) && val % maxp == 0)
val++;
/* we might need to flush any pending tx buffers if running */
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: divide error in cdc_ncm_update_rxtx_max
2019-09-17 13:52 ` Bjørn Mork
@ 2019-09-17 14:09 ` syzbot
2019-09-17 15:46 ` Bjørn Mork
0 siblings, 1 reply; 5+ messages in thread
From: syzbot @ 2019-09-17 14:09 UTC (permalink / raw)
To: andreyknvl, bjorn, davem, linux-kernel, linux-usb, netdev,
oliver, syzkaller-bugs
Hello,
syzbot has tested the proposed patch but the reproducer still triggered
crash:
divide error in usbnet_update_max_qlen
cdc_ncm 5-1:1.0: setting tx_max = 16384
divide error: 0000 [#1] SMP KASAN
CPU: 1 PID: 1737 Comm: kworker/1:2 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:usbnet_update_max_qlen drivers/net/usb/usbnet.c:344 [inline]
RIP: 0010:usbnet_update_max_qlen+0x231/0x370 drivers/net/usb/usbnet.c:338
Code: 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 46 01
00 00 48 8d bb f4 00 00 00 31 d2 b8 c8 63 01 00 48 89 f9 <48> f7 b3 a8 01
00 00 48 ba 00 00 00 00 00 fc ff df 48 c1 e9 03 0f
RSP: 0018:ffff8881c05c7010 EFLAGS: 00010246
RAX: 00000000000163c8 RBX: ffff8881c7334ec0 RCX: ffff8881c7334fb4
RDX: 0000000000000000 RSI: ffffffff8344ecde RDI: ffff8881c7334fb4
RBP: 0000000000000003 R08: ffff8881d4a9b000 R09: ffffed1038e6688a
R10: ffffed1038e66889 R11: ffff8881c733444f R12: 0000000000004000
R13: ffff8881c7334ec0 R14: 0000000000000000 R15: ffff8881d62e77ac
FS: 0000000000000000(0000) GS:ffff8881db300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5a513e8000 CR3: 00000001d6436000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
cdc_ncm_update_rxtx_max+0xa61/0xf30 drivers/net/usb/cdc_ncm.c:437
cdc_ncm_setup drivers/net/usb/cdc_ncm.c:664 [inline]
cdc_ncm_bind_common+0x1005/0x2570 drivers/net/usb/cdc_ncm.c:921
cdc_ncm_bind+0x7c/0x1c0 drivers/net/usb/cdc_ncm.c:1035
usbnet_probe+0xb43/0x23cf drivers/net/usb/usbnet.c:1722
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x6d0 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:721
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:828
bus_for_each_drv+0x162/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:894
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2165
usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
really_probe+0x281/0x6d0 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:721
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:828
bus_for_each_drv+0x162/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:894
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2165
usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
hub_port_connect drivers/usb/core/hub.c:5098 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
port_event drivers/usb/core/hub.c:5359 [inline]
hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
worker_thread+0x96/0xe20 kernel/workqueue.c:2415
kthread+0x318/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Modules linked in:
---[ end trace 472dbe98145a6d5e ]---
RIP: 0010:usbnet_update_max_qlen drivers/net/usb/usbnet.c:344 [inline]
RIP: 0010:usbnet_update_max_qlen+0x231/0x370 drivers/net/usb/usbnet.c:338
Code: 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 46 01
00 00 48 8d bb f4 00 00 00 31 d2 b8 c8 63 01 00 48 89 f9 <48> f7 b3 a8 01
00 00 48 ba 00 00 00 00 00 fc ff df 48 c1 e9 03 0f
RSP: 0018:ffff8881c05c7010 EFLAGS: 00010246
RAX: 00000000000163c8 RBX: ffff8881c7334ec0 RCX: ffff8881c7334fb4
RDX: 0000000000000000 RSI: ffffffff8344ecde RDI: ffff8881c7334fb4
RBP: 0000000000000003 R08: ffff8881d4a9b000 R09: ffffed1038e6688a
R10: ffffed1038e66889 R11: ffff8881c733444f R12: 0000000000004000
R13: ffff8881c7334ec0 R14: 0000000000000000 R15: ffff8881d62e77ac
FS: 0000000000000000(0000) GS:ffff8881db300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5a513e8000 CR3: 00000001d6436000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Tested on:
commit: f0df5c1b usb-fuzzer: main usb gadget fuzzer driver
git tree: https://github.com/google/kasan.git
console output: https://syzkaller.appspot.com/x/log.txt?x=173ea979600000
kernel config: https://syzkaller.appspot.com/x/.config?x=5c6633fa4ed00be5
dashboard link: https://syzkaller.appspot.com/bug?extid=ce366e2b8296e25d84f5
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
patch: https://syzkaller.appspot.com/x/patch.diff?x=1538611d600000
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: divide error in cdc_ncm_update_rxtx_max
2019-09-17 14:09 ` syzbot
@ 2019-09-17 15:46 ` Bjørn Mork
0 siblings, 0 replies; 5+ messages in thread
From: Bjørn Mork @ 2019-09-17 15:46 UTC (permalink / raw)
To: syzbot
Cc: andreyknvl, davem, linux-kernel, linux-usb, netdev, oliver,
syzkaller-bugs
syzbot <syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com> writes:
> syzbot has tested the proposed patch but the reproducer still
> triggered crash:
> divide error in usbnet_update_max_qlen
>
> cdc_ncm 5-1:1.0: setting tx_max = 16384
> divide error: 0000 [#1] SMP KASAN
> CPU: 1 PID: 1737 Comm: kworker/1:2 Not tainted 5.3.0-rc7+ #0
> Hardware name: Google Google Compute Engine/Google Compute Engine,
> BIOS Google 01/01/2011
> Workqueue: usb_hub_wq hub_event
> RIP: 0010:usbnet_update_max_qlen drivers/net/usb/usbnet.c:344 [inline]
> RIP: 0010:usbnet_update_max_qlen+0x231/0x370 drivers/net/usb/usbnet.c:338
Sure, but that's another error already fixed by Oliver..
I guess this fix worked. But I believe we should see if this is a more
generic issue than just this single driver/bug. I fear it is...
Bjørn
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: divide error in cdc_ncm_update_rxtx_max
2019-09-18 12:01 [PATCH net,stable] cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSize Bjørn Mork
@ 2019-09-18 12:26 ` syzbot
0 siblings, 0 replies; 5+ messages in thread
From: syzbot @ 2019-09-18 12:26 UTC (permalink / raw)
To: bjorn, linux-usb, netdev, oliver, syzkaller-bugs
Hello,
syzbot has tested the proposed patch and the reproducer did not trigger
crash:
Reported-and-tested-by:
syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com
Tested on:
commit: f0df5c1b usb-fuzzer: main usb gadget fuzzer driver
git tree: https://github.com/google/kasan.git
kernel config: https://syzkaller.appspot.com/x/.config?x=5c6633fa4ed00be5
dashboard link: https://syzkaller.appspot.com/bug?extid=ce366e2b8296e25d84f5
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
patch: https://syzkaller.appspot.com/x/patch.diff?x=114971b5600000
Note: testing is done by a robot and is best-effort only.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-09-18 12:26 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-16 13:29 divide error in cdc_ncm_update_rxtx_max syzbot
2019-09-17 13:52 ` Bjørn Mork
2019-09-17 14:09 ` syzbot
2019-09-17 15:46 ` Bjørn Mork
2019-09-18 12:01 [PATCH net,stable] cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSize Bjørn Mork
2019-09-18 12:26 ` divide error in cdc_ncm_update_rxtx_max syzbot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.