All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 2/2] video: mmp: Remove references to CPU_PXA988
@ 2014-04-15 11:24 ` Paul Bolle
  0 siblings, 0 replies; 4+ messages in thread
From: Paul Bolle @ 2014-04-15 11:24 UTC (permalink / raw)
  To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
  Cc: Richard Weinberger, linux-fbdev, linux-kernel

From: Richard Weinberger <richard@nod.at>

References to the Kconfig symbol CPU_PXA988 were added to the tree in
v3.9. But that Kconfig symbol has never been part of the tree. So get
rid of these references.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
0) Tested with git grep.

1) Originally sent as "[PATCH 07/28] Remove CPU_PXA988" two months ago.
Added a proper commit explanation to aid reviewers.

 drivers/video/mmp/Kconfig       |  2 +-
 drivers/video/mmp/hw/Kconfig    |  6 +++---
 drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
 3 files changed, 4 insertions(+), 36 deletions(-)

diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
index 969925d694c9..f37bd6c47779 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/mmp/Kconfig
@@ -1,6 +1,6 @@
 menuconfig MMP_DISP
         tristate "Marvell MMP Display Subsystem support"
-        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+        depends on CPU_PXA910 || CPU_MMP2
         help
 	  Marvell Display Subsystem support.
 
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
index 99f0506afc99..c735d133895c 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/mmp/hw/Kconfig
@@ -2,12 +2,12 @@ if MMP_DISP
 
 config MMP_DISP_CONTROLLER
 	bool "mmp display controller hw support"
-	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+	depends on CPU_PXA910 || CPU_MMP2
 	default n
 	help
 		Marvell MMP display hw controller support
-		this controller is used on Marvell PXA910,
-		MMP2, PXA988 chips
+		this controller is used on Marvell PXA910 and
+		MMP2 chips
 
 config MMP_DISP_SPI
 	bool "mmp display controller spi port"
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h
index 53301cfdb1ae..56fdeab34355 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/mmp/hw/mmp_ctrl.h
@@ -167,11 +167,7 @@ struct lcd_regs {
 				PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
 
 /* dither configure */
-#ifdef CONFIG_CPU_PXA988
-#define LCD_DITHER_CTRL				(0x01EC)
-#else
 #define LCD_DITHER_CTRL				(0x00A0)
-#endif
 
 #define DITHER_TBL_INDEX_SEL(s)		((s) << 16)
 #define DITHER_MODE2(m)				((m) << 12)
@@ -186,15 +182,6 @@ struct lcd_regs {
 #define DITHER_EN1					(1)
 
 /* dither table data was fixed by video bpp of input and output*/
-#ifdef CONFIG_CPU_PXA988
-#define DITHER_TB_4X4_INDEX0		(0x6e4ca280)
-#define DITHER_TB_4X4_INDEX1		(0x5d7f91b3)
-#define DITHER_TB_4X8_INDEX0		(0xb391a280)
-#define DITHER_TB_4X8_INDEX1		(0x7f5d6e4c)
-#define DITHER_TB_4X8_INDEX2		(0x80a291b3)
-#define DITHER_TB_4X8_INDEX3		(0x4c6e5d7f)
-#define LCD_DITHER_TBL_DATA		(0x01F0)
-#else
 #define DITHER_TB_4X4_INDEX0		(0x3b19f7d5)
 #define DITHER_TB_4X4_INDEX1		(0x082ac4e6)
 #define DITHER_TB_4X8_INDEX0		(0xf7d508e6)
@@ -202,7 +189,6 @@ struct lcd_regs {
 #define DITHER_TB_4X8_INDEX2		(0xc4e6d5f7)
 #define DITHER_TB_4X8_INDEX3		(0x082a193b)
 #define LCD_DITHER_TBL_DATA		(0x00A4)
-#endif
 
 /* Video Frame 0&1 start address registers */
 #define	LCD_SPU_DMA_START_ADDR_Y0	0x00C0
@@ -933,16 +919,9 @@ struct lcd_regs {
 #define LCD_PN2_SQULN2_CTRL			(0x02F0)
 #define ALL_LAYER_ALPHA_SEL			(0x02F4)
 
-/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
-#ifdef CONFIG_CPU_PXA988
-#define TIMING_MASTER_CONTROL			(0x01F4)
-#define MASTER_ENH(id)				(1 << ((id) + 5))
-#define MASTER_ENV(id)				(1 << ((id) + 6))
-#else
 #define TIMING_MASTER_CONTROL			(0x02F8)
 #define MASTER_ENH(id)				(1 << (id))
 #define MASTER_ENV(id)				(1 << ((id) + 4))
-#endif
 
 #define DSI_START_SEL_SHIFT(id)		(((id) << 1) + 8)
 #define timing_master_config(path, dsi_id, lcd_id) \
@@ -1312,19 +1291,8 @@ struct dsi_regs {
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK		(0xff)
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT	0
 
-/*
- * DSI timings
- * PXA988 has diffrent ESC CLK with MMP2/MMP3
- * it will be used in dsi_set_dphy() in pxa688_phy.c
- * as low power mode clock.
- */
-#ifdef CONFIG_CPU_PXA988
-#define DSI_ESC_CLK				52  /* Unit: Mhz */
-#define DSI_ESC_CLK_T				19  /* Unit: ns */
-#else
 #define DSI_ESC_CLK				66  /* Unit: Mhz */
 #define DSI_ESC_CLK_T				15  /* Unit: ns */
-#endif
 
 /* LVDS */
 /* LVDS_PHY_CTRL */
-- 
1.9.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH 2/2] video: mmp: Remove references to CPU_PXA988
@ 2014-04-15 11:24 ` Paul Bolle
  0 siblings, 0 replies; 4+ messages in thread
From: Paul Bolle @ 2014-04-15 11:24 UTC (permalink / raw)
  To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
  Cc: Richard Weinberger, linux-fbdev, linux-kernel

From: Richard Weinberger <richard@nod.at>

References to the Kconfig symbol CPU_PXA988 were added to the tree in
v3.9. But that Kconfig symbol has never been part of the tree. So get
rid of these references.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
0) Tested with git grep.

1) Originally sent as "[PATCH 07/28] Remove CPU_PXA988" two months ago.
Added a proper commit explanation to aid reviewers.

 drivers/video/mmp/Kconfig       |  2 +-
 drivers/video/mmp/hw/Kconfig    |  6 +++---
 drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
 3 files changed, 4 insertions(+), 36 deletions(-)

diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
index 969925d694c9..f37bd6c47779 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/mmp/Kconfig
@@ -1,6 +1,6 @@
 menuconfig MMP_DISP
         tristate "Marvell MMP Display Subsystem support"
-        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+        depends on CPU_PXA910 || CPU_MMP2
         help
 	  Marvell Display Subsystem support.
 
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
index 99f0506afc99..c735d133895c 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/mmp/hw/Kconfig
@@ -2,12 +2,12 @@ if MMP_DISP
 
 config MMP_DISP_CONTROLLER
 	bool "mmp display controller hw support"
-	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+	depends on CPU_PXA910 || CPU_MMP2
 	default n
 	help
 		Marvell MMP display hw controller support
-		this controller is used on Marvell PXA910,
-		MMP2, PXA988 chips
+		this controller is used on Marvell PXA910 and
+		MMP2 chips
 
 config MMP_DISP_SPI
 	bool "mmp display controller spi port"
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h
index 53301cfdb1ae..56fdeab34355 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/mmp/hw/mmp_ctrl.h
@@ -167,11 +167,7 @@ struct lcd_regs {
 				PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
 
 /* dither configure */
-#ifdef CONFIG_CPU_PXA988
-#define LCD_DITHER_CTRL				(0x01EC)
-#else
 #define LCD_DITHER_CTRL				(0x00A0)
-#endif
 
 #define DITHER_TBL_INDEX_SEL(s)		((s) << 16)
 #define DITHER_MODE2(m)				((m) << 12)
@@ -186,15 +182,6 @@ struct lcd_regs {
 #define DITHER_EN1					(1)
 
 /* dither table data was fixed by video bpp of input and output*/
-#ifdef CONFIG_CPU_PXA988
-#define DITHER_TB_4X4_INDEX0		(0x6e4ca280)
-#define DITHER_TB_4X4_INDEX1		(0x5d7f91b3)
-#define DITHER_TB_4X8_INDEX0		(0xb391a280)
-#define DITHER_TB_4X8_INDEX1		(0x7f5d6e4c)
-#define DITHER_TB_4X8_INDEX2		(0x80a291b3)
-#define DITHER_TB_4X8_INDEX3		(0x4c6e5d7f)
-#define LCD_DITHER_TBL_DATA		(0x01F0)
-#else
 #define DITHER_TB_4X4_INDEX0		(0x3b19f7d5)
 #define DITHER_TB_4X4_INDEX1		(0x082ac4e6)
 #define DITHER_TB_4X8_INDEX0		(0xf7d508e6)
@@ -202,7 +189,6 @@ struct lcd_regs {
 #define DITHER_TB_4X8_INDEX2		(0xc4e6d5f7)
 #define DITHER_TB_4X8_INDEX3		(0x082a193b)
 #define LCD_DITHER_TBL_DATA		(0x00A4)
-#endif
 
 /* Video Frame 0&1 start address registers */
 #define	LCD_SPU_DMA_START_ADDR_Y0	0x00C0
@@ -933,16 +919,9 @@ struct lcd_regs {
 #define LCD_PN2_SQULN2_CTRL			(0x02F0)
 #define ALL_LAYER_ALPHA_SEL			(0x02F4)
 
-/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
-#ifdef CONFIG_CPU_PXA988
-#define TIMING_MASTER_CONTROL			(0x01F4)
-#define MASTER_ENH(id)				(1 << ((id) + 5))
-#define MASTER_ENV(id)				(1 << ((id) + 6))
-#else
 #define TIMING_MASTER_CONTROL			(0x02F8)
 #define MASTER_ENH(id)				(1 << (id))
 #define MASTER_ENV(id)				(1 << ((id) + 4))
-#endif
 
 #define DSI_START_SEL_SHIFT(id)		(((id) << 1) + 8)
 #define timing_master_config(path, dsi_id, lcd_id) \
@@ -1312,19 +1291,8 @@ struct dsi_regs {
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK		(0xff)
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT	0
 
-/*
- * DSI timings
- * PXA988 has diffrent ESC CLK with MMP2/MMP3
- * it will be used in dsi_set_dphy() in pxa688_phy.c
- * as low power mode clock.
- */
-#ifdef CONFIG_CPU_PXA988
-#define DSI_ESC_CLK				52  /* Unit: Mhz */
-#define DSI_ESC_CLK_T				19  /* Unit: ns */
-#else
 #define DSI_ESC_CLK				66  /* Unit: Mhz */
 #define DSI_ESC_CLK_T				15  /* Unit: ns */
-#endif
 
 /* LVDS */
 /* LVDS_PHY_CTRL */
-- 
1.9.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH 2/2] video: mmp: Remove references to CPU_PXA988
  2014-04-15 11:24 ` Paul Bolle
@ 2014-04-15 12:10   ` Jingoo Han
  -1 siblings, 0 replies; 4+ messages in thread
From: Jingoo Han @ 2014-04-15 12:10 UTC (permalink / raw)
  To: 'Paul Bolle', 'Tomi Valkeinen'
  Cc: 'Jean-Christophe Plagniol-Villard',
	'Richard Weinberger',
	linux-fbdev, linux-kernel, 'Jingoo Han'

On Tuesday, April 15, 2014 8:25 PM, Paul Bolle wrote:
> 
> From: Richard Weinberger <richard@nod.at>
> 
> References to the Kconfig symbol CPU_PXA988 were added to the tree in
> v3.9. But that Kconfig symbol has never been part of the tree. So get
> rid of these references.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>

Reviewed-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han

> ---
> 0) Tested with git grep.
> 
> 1) Originally sent as "[PATCH 07/28] Remove CPU_PXA988" two months ago.
> Added a proper commit explanation to aid reviewers.
> 
>  drivers/video/mmp/Kconfig       |  2 +-
>  drivers/video/mmp/hw/Kconfig    |  6 +++---
>  drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
>  3 files changed, 4 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
> index 969925d694c9..f37bd6c47779 100644
> --- a/drivers/video/mmp/Kconfig
> +++ b/drivers/video/mmp/Kconfig
> @@ -1,6 +1,6 @@
>  menuconfig MMP_DISP
>          tristate "Marvell MMP Display Subsystem support"
> -        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
> +        depends on CPU_PXA910 || CPU_MMP2
>          help
>  	  Marvell Display Subsystem support.
> 
> diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
> index 99f0506afc99..c735d133895c 100644
> --- a/drivers/video/mmp/hw/Kconfig
> +++ b/drivers/video/mmp/hw/Kconfig
> @@ -2,12 +2,12 @@ if MMP_DISP
> 
>  config MMP_DISP_CONTROLLER
>  	bool "mmp display controller hw support"
> -	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
> +	depends on CPU_PXA910 || CPU_MMP2
>  	default n
>  	help
>  		Marvell MMP display hw controller support
> -		this controller is used on Marvell PXA910,
> -		MMP2, PXA988 chips
> +		this controller is used on Marvell PXA910 and
> +		MMP2 chips
> 
>  config MMP_DISP_SPI
>  	bool "mmp display controller spi port"
> diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h
> index 53301cfdb1ae..56fdeab34355 100644
> --- a/drivers/video/mmp/hw/mmp_ctrl.h
> +++ b/drivers/video/mmp/hw/mmp_ctrl.h
> @@ -167,11 +167,7 @@ struct lcd_regs {
>  				PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
> 
>  /* dither configure */
> -#ifdef CONFIG_CPU_PXA988
> -#define LCD_DITHER_CTRL				(0x01EC)
> -#else
>  #define LCD_DITHER_CTRL				(0x00A0)
> -#endif
> 
>  #define DITHER_TBL_INDEX_SEL(s)		((s) << 16)
>  #define DITHER_MODE2(m)				((m) << 12)
> @@ -186,15 +182,6 @@ struct lcd_regs {
>  #define DITHER_EN1					(1)
> 
>  /* dither table data was fixed by video bpp of input and output*/
> -#ifdef CONFIG_CPU_PXA988
> -#define DITHER_TB_4X4_INDEX0		(0x6e4ca280)
> -#define DITHER_TB_4X4_INDEX1		(0x5d7f91b3)
> -#define DITHER_TB_4X8_INDEX0		(0xb391a280)
> -#define DITHER_TB_4X8_INDEX1		(0x7f5d6e4c)
> -#define DITHER_TB_4X8_INDEX2		(0x80a291b3)
> -#define DITHER_TB_4X8_INDEX3		(0x4c6e5d7f)
> -#define LCD_DITHER_TBL_DATA		(0x01F0)
> -#else
>  #define DITHER_TB_4X4_INDEX0		(0x3b19f7d5)
>  #define DITHER_TB_4X4_INDEX1		(0x082ac4e6)
>  #define DITHER_TB_4X8_INDEX0		(0xf7d508e6)
> @@ -202,7 +189,6 @@ struct lcd_regs {
>  #define DITHER_TB_4X8_INDEX2		(0xc4e6d5f7)
>  #define DITHER_TB_4X8_INDEX3		(0x082a193b)
>  #define LCD_DITHER_TBL_DATA		(0x00A4)
> -#endif
> 
>  /* Video Frame 0&1 start address registers */
>  #define	LCD_SPU_DMA_START_ADDR_Y0	0x00C0
> @@ -933,16 +919,9 @@ struct lcd_regs {
>  #define LCD_PN2_SQULN2_CTRL			(0x02F0)
>  #define ALL_LAYER_ALPHA_SEL			(0x02F4)
> 
> -/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
> -#ifdef CONFIG_CPU_PXA988
> -#define TIMING_MASTER_CONTROL			(0x01F4)
> -#define MASTER_ENH(id)				(1 << ((id) + 5))
> -#define MASTER_ENV(id)				(1 << ((id) + 6))
> -#else
>  #define TIMING_MASTER_CONTROL			(0x02F8)
>  #define MASTER_ENH(id)				(1 << (id))
>  #define MASTER_ENV(id)				(1 << ((id) + 4))
> -#endif
> 
>  #define DSI_START_SEL_SHIFT(id)		(((id) << 1) + 8)
>  #define timing_master_config(path, dsi_id, lcd_id) \
> @@ -1312,19 +1291,8 @@ struct dsi_regs {
>  #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK		(0xff)
>  #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT	0
> 
> -/*
> - * DSI timings
> - * PXA988 has diffrent ESC CLK with MMP2/MMP3
> - * it will be used in dsi_set_dphy() in pxa688_phy.c
> - * as low power mode clock.
> - */
> -#ifdef CONFIG_CPU_PXA988
> -#define DSI_ESC_CLK				52  /* Unit: Mhz */
> -#define DSI_ESC_CLK_T				19  /* Unit: ns */
> -#else
>  #define DSI_ESC_CLK				66  /* Unit: Mhz */
>  #define DSI_ESC_CLK_T				15  /* Unit: ns */
> -#endif
> 
>  /* LVDS */
>  /* LVDS_PHY_CTRL */
> --
> 1.9.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 2/2] video: mmp: Remove references to CPU_PXA988
@ 2014-04-15 12:10   ` Jingoo Han
  0 siblings, 0 replies; 4+ messages in thread
From: Jingoo Han @ 2014-04-15 12:10 UTC (permalink / raw)
  To: 'Paul Bolle', 'Tomi Valkeinen'
  Cc: 'Jean-Christophe Plagniol-Villard',
	'Richard Weinberger',
	linux-fbdev, linux-kernel, 'Jingoo Han'

On Tuesday, April 15, 2014 8:25 PM, Paul Bolle wrote:
> 
> From: Richard Weinberger <richard@nod.at>
> 
> References to the Kconfig symbol CPU_PXA988 were added to the tree in
> v3.9. But that Kconfig symbol has never been part of the tree. So get
> rid of these references.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>

Reviewed-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han

> ---
> 0) Tested with git grep.
> 
> 1) Originally sent as "[PATCH 07/28] Remove CPU_PXA988" two months ago.
> Added a proper commit explanation to aid reviewers.
> 
>  drivers/video/mmp/Kconfig       |  2 +-
>  drivers/video/mmp/hw/Kconfig    |  6 +++---
>  drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
>  3 files changed, 4 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
> index 969925d694c9..f37bd6c47779 100644
> --- a/drivers/video/mmp/Kconfig
> +++ b/drivers/video/mmp/Kconfig
> @@ -1,6 +1,6 @@
>  menuconfig MMP_DISP
>          tristate "Marvell MMP Display Subsystem support"
> -        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
> +        depends on CPU_PXA910 || CPU_MMP2
>          help
>  	  Marvell Display Subsystem support.
> 
> diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
> index 99f0506afc99..c735d133895c 100644
> --- a/drivers/video/mmp/hw/Kconfig
> +++ b/drivers/video/mmp/hw/Kconfig
> @@ -2,12 +2,12 @@ if MMP_DISP
> 
>  config MMP_DISP_CONTROLLER
>  	bool "mmp display controller hw support"
> -	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
> +	depends on CPU_PXA910 || CPU_MMP2
>  	default n
>  	help
>  		Marvell MMP display hw controller support
> -		this controller is used on Marvell PXA910,
> -		MMP2, PXA988 chips
> +		this controller is used on Marvell PXA910 and
> +		MMP2 chips
> 
>  config MMP_DISP_SPI
>  	bool "mmp display controller spi port"
> diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h
> index 53301cfdb1ae..56fdeab34355 100644
> --- a/drivers/video/mmp/hw/mmp_ctrl.h
> +++ b/drivers/video/mmp/hw/mmp_ctrl.h
> @@ -167,11 +167,7 @@ struct lcd_regs {
>  				PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
> 
>  /* dither configure */
> -#ifdef CONFIG_CPU_PXA988
> -#define LCD_DITHER_CTRL				(0x01EC)
> -#else
>  #define LCD_DITHER_CTRL				(0x00A0)
> -#endif
> 
>  #define DITHER_TBL_INDEX_SEL(s)		((s) << 16)
>  #define DITHER_MODE2(m)				((m) << 12)
> @@ -186,15 +182,6 @@ struct lcd_regs {
>  #define DITHER_EN1					(1)
> 
>  /* dither table data was fixed by video bpp of input and output*/
> -#ifdef CONFIG_CPU_PXA988
> -#define DITHER_TB_4X4_INDEX0		(0x6e4ca280)
> -#define DITHER_TB_4X4_INDEX1		(0x5d7f91b3)
> -#define DITHER_TB_4X8_INDEX0		(0xb391a280)
> -#define DITHER_TB_4X8_INDEX1		(0x7f5d6e4c)
> -#define DITHER_TB_4X8_INDEX2		(0x80a291b3)
> -#define DITHER_TB_4X8_INDEX3		(0x4c6e5d7f)
> -#define LCD_DITHER_TBL_DATA		(0x01F0)
> -#else
>  #define DITHER_TB_4X4_INDEX0		(0x3b19f7d5)
>  #define DITHER_TB_4X4_INDEX1		(0x082ac4e6)
>  #define DITHER_TB_4X8_INDEX0		(0xf7d508e6)
> @@ -202,7 +189,6 @@ struct lcd_regs {
>  #define DITHER_TB_4X8_INDEX2		(0xc4e6d5f7)
>  #define DITHER_TB_4X8_INDEX3		(0x082a193b)
>  #define LCD_DITHER_TBL_DATA		(0x00A4)
> -#endif
> 
>  /* Video Frame 0&1 start address registers */
>  #define	LCD_SPU_DMA_START_ADDR_Y0	0x00C0
> @@ -933,16 +919,9 @@ struct lcd_regs {
>  #define LCD_PN2_SQULN2_CTRL			(0x02F0)
>  #define ALL_LAYER_ALPHA_SEL			(0x02F4)
> 
> -/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
> -#ifdef CONFIG_CPU_PXA988
> -#define TIMING_MASTER_CONTROL			(0x01F4)
> -#define MASTER_ENH(id)				(1 << ((id) + 5))
> -#define MASTER_ENV(id)				(1 << ((id) + 6))
> -#else
>  #define TIMING_MASTER_CONTROL			(0x02F8)
>  #define MASTER_ENH(id)				(1 << (id))
>  #define MASTER_ENV(id)				(1 << ((id) + 4))
> -#endif
> 
>  #define DSI_START_SEL_SHIFT(id)		(((id) << 1) + 8)
>  #define timing_master_config(path, dsi_id, lcd_id) \
> @@ -1312,19 +1291,8 @@ struct dsi_regs {
>  #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK		(0xff)
>  #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT	0
> 
> -/*
> - * DSI timings
> - * PXA988 has diffrent ESC CLK with MMP2/MMP3
> - * it will be used in dsi_set_dphy() in pxa688_phy.c
> - * as low power mode clock.
> - */
> -#ifdef CONFIG_CPU_PXA988
> -#define DSI_ESC_CLK				52  /* Unit: Mhz */
> -#define DSI_ESC_CLK_T				19  /* Unit: ns */
> -#else
>  #define DSI_ESC_CLK				66  /* Unit: Mhz */
>  #define DSI_ESC_CLK_T				15  /* Unit: ns */
> -#endif
> 
>  /* LVDS */
>  /* LVDS_PHY_CTRL */
> --
> 1.9.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2014-04-15 12:10 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-15 11:24 [PATCH 2/2] video: mmp: Remove references to CPU_PXA988 Paul Bolle
2014-04-15 11:24 ` Paul Bolle
2014-04-15 12:10 ` Jingoo Han
2014-04-15 12:10   ` Jingoo Han

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.