All of
 help / color / mirror / Atom feed
* [ath9k-devel] TxPower setting on per packet basis for 9003_phy (AR9382)
@ 2011-05-19 11:13 Falk-Moritz Schaefer
  0 siblings, 0 replies; only message in thread
From: Falk-Moritz Schaefer @ 2011-05-19 11:13 UTC (permalink / raw)
  To: ath9k-devel


it is possible to set the default txpower limits with iw for my WPEA-121N
AR9382 card, but not to set the txpower on per packet basis. I want the
AR9382 to use the TxPower settings in the tx control descriptor.

With 9002 it was enough to write:

But with 9003 somehow it does not use the information in the tx descpritor.
What am I missing?


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2011-05-19 11:13 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-19 11:13 [ath9k-devel] TxPower setting on per packet basis for 9003_phy (AR9382) Falk-Moritz Schaefer

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.