Re: Booting Issue in smarc-samx6i(IMX6)

Re: Booting Issue in smarc-samx6i(IMX6)

[Berlin Vince Joe V S]

[-- Attachment #1.1: Type: text/plain, Size: 1676 bytes --]

I am adding supporting data that was displayed on putty while booting....

 

 

From: Berlin Vince Joe V S [mailto:berlin@cdac.in] 
Sent: Tuesday, March 22, 2016 3:04 PM
To: 'yocto@yoctoproject.org'
Subject: Booting Issue in smarc-samx6i(IMX6)

 

Haii,

 

We are using yocto to boot our smarc board. We are facing following problem

.       The booting stops at the middle and we get an error as "Wrong
Ramdisk image Format or corrupted image".

 

And I am adding supporting data that was displayed on putty while
booting....

 

Note:

.       We are using Kontron(smarc-samx6i).

.       We are adding patch for samx6i.

.       We are adding patch to meta-fsl-arm-extra.

.       We are using zImage for dtb file and uImage for bin file.

.       To convert zImage to uImage we use mkimage command.

 

Regards


-------------------------------------------------------------------------------------------------------------------------------
[ C-DAC is on Social-Media too. Kindly follow us at:
Facebook: https://www.facebook.com/CDACINDIA & Twitter: @cdacindia ]

This e-mail is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. If you are not the
intended recipient, please contact the sender by reply e-mail and destroy
all copies and the original message. Any unauthorized review, use,
disclosure, dissemination, forwarding, printing or copying of this email
is strictly prohibited and appropriate legal action will be taken.
-------------------------------------------------------------------------------------------------------------------------------


[-- Attachment #1.2: Type: text/html, Size: 9782 bytes --]

[-- Attachment #2: putty_output.pdf --]
[-- Type: application/pdf, Size: 39801 bytes --]

Booting Issue in smarc-samx6i(IMX6)

[Berlin Vince Joe V S]

[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]

Haii,

 

We are using yocto to boot our smarc board. We are facing following problem

.       The booting stops at the middle and we get an error as "Wrong
Ramdisk image Format or corrupted image".

 

And I am adding supporting data that was displayed on putty while
booting....

 

Note:

.       We are using Kontron(smarc-samx6i).

.       We are adding patch for samx6i.

.       We are adding patch to meta-fsl-arm-extra.

.       We are using zImage for dtb file and uImage for bin file.

.       To convert zImage to uImage we use mkimage command.

 

Regards


-------------------------------------------------------------------------------------------------------------------------------
[ C-DAC is on Social-Media too. Kindly follow us at:
Facebook: https://www.facebook.com/CDACINDIA & Twitter: @cdacindia ]

This e-mail is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. If you are not the
intended recipient, please contact the sender by reply e-mail and destroy
all copies and the original message. Any unauthorized review, use,
disclosure, dissemination, forwarding, printing or copying of this email
is strictly prohibited and appropriate legal action will be taken.
-------------------------------------------------------------------------------------------------------------------------------


[-- Attachment #2: Type: text/html, Size: 7207 bytes --]