Dekoding encap.txt to routing for JNOS

Dekoding encap.txt to routing for JNOS

[Janusz Przybylski - SP1LOP]

I greet reading...
I have request whether accessible permissive on decodification software is
file encap.txt on file routing in format for JNOS 1.11e, because such system
on gate of bristles.ampr.I have org installed.

Routingu used in encap format.txt it is not peaceable with my format
routingu
and then example:
encap.txt
route addprivate 44.165.25/24 encap 80.48.10 5.183

and this routing:
ip route add 44.165.25/25 via 80.48.10 5.183 dev tunl0 onlink

this exemplifies from utilization my data.

I ask about information in this matter on my e-mail
sp1lop@gw.sp1lop.szczecin.pl
I thank warmly, and apologize for my simultaneously very
bad English


73 de Janusz SP1LOP
================================
SP1LOP Janusz Przybylski
QTH: Szczecin JO73GL
--------------------------------------------------------------
Member of SPDXC 397/R from 1986
AmprNet: sp1lop.ampr.org       [44.165.25.33]
I am Sysop szczecin.ampr.org [44.165.25.233]
AX25  SP1LOP @ SR1BSZ.SZ.POL.EU
----------------------------------------------------------------
e-mail: sp1lop@gw.sp1lop.szczecin.pl
Web:  http://www.sp1lop.szczecin.pl

Re: Dekoding encap.txt to routing for JNOS

[M Taylor]

On Sat, Mar 22, 2003 at 08:10:54PM +0100, Janusz Przybylski - SP1LOP wrote:
> 
> Routingu used in encap format.txt it is not peaceable with my format
> routingu
> and then example:
> encap.txt
> route addprivate 44.165.25/24 encap 80.48.10 5.183
> 
> and this routing:
> ip route add 44.165.25/25 via 80.48.10 5.183 dev tunl0 onlink
> 
> this exemplifies from utilization my data.

If I understand your request correctly, you wish to use the encap.txt
file for building IPIP encapsulation routes under Linux using iproute2.

If so, then I have some scripts that should help you.
http://www.mctaylor.com/ve1mct/ampr_gateways.tar.gz
 
I hope that is useful for you.

-ve1mct