* [PATCH 1/3] video: xilinxfb: Use standard variable name convention
@ 2013-09-12 5:54 ` Michal Simek
0 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-12 5:54 UTC (permalink / raw)
To: linux-kernel, monstr
Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, Grant Likely,
Rob Herring, linux-fbdev, devicetree
[-- Attachment #1: Type: text/plain, Size: 2571 bytes --]
s/op/pdev/ in xilinxfb_of_probe().
No functional chagnes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/video/xilinxfb.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 84c664e..123cd70 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -413,7 +413,7 @@ static int xilinxfb_release(struct device *dev)
* OF bus binding
*/
-static int xilinxfb_of_probe(struct platform_device *op)
+static int xilinxfb_of_probe(struct platform_device *pdev)
{
const u32 *prop;
u32 tft_access = 0;
@@ -427,7 +427,7 @@ static int xilinxfb_of_probe(struct platform_device *op)
/* Allocate the driver data region */
drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
- dev_err(&op->dev, "Couldn't allocate device private record\n");
+ dev_err(&pdev->dev, "Couldn't allocate device private record\n");
return -ENOMEM;
}
@@ -435,7 +435,7 @@ static int xilinxfb_of_probe(struct platform_device *op)
* To check whether the core is connected directly to DCR or BUS
* interface and initialize the tft_access accordingly.
*/
- of_property_read_u32(op->dev.of_node, "xlnx,dcr-splb-slave-if",
+ of_property_read_u32(pdev->dev.of_node, "xlnx,dcr-splb-slave-if",
&tft_access);
/*
@@ -459,29 +459,29 @@ static int xilinxfb_of_probe(struct platform_device *op)
}
#endif
- prop = of_get_property(op->dev.of_node, "phys-size", &size);
+ prop = of_get_property(pdev->dev.of_node, "phys-size", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.screen_width_mm = prop[0];
pdata.screen_height_mm = prop[1];
}
- prop = of_get_property(op->dev.of_node, "resolution", &size);
+ prop = of_get_property(pdev->dev.of_node, "resolution", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.xres = prop[0];
pdata.yres = prop[1];
}
- prop = of_get_property(op->dev.of_node, "virtual-resolution", &size);
+ prop = of_get_property(pdev->dev.of_node, "virtual-resolution", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.xvirt = prop[0];
pdata.yvirt = prop[1];
}
- if (of_find_property(op->dev.of_node, "rotate-display", NULL))
+ if (of_find_property(pdev->dev.of_node, "rotate-display", NULL))
pdata.rotate_screen = 1;
- dev_set_drvdata(&op->dev, drvdata);
- return xilinxfb_assign(op, drvdata, &pdata);
+ dev_set_drvdata(&pdev->dev, drvdata);
+ return xilinxfb_assign(pdev, drvdata, &pdata);
}
static int xilinxfb_of_remove(struct platform_device *op)
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 1/3] video: xilinxfb: Use standard variable name convention
@ 2013-09-12 5:54 ` Michal Simek
0 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-12 5:54 UTC (permalink / raw)
To: linux-kernel, monstr
Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, Grant Likely,
Rob Herring, linux-fbdev, devicetree
[-- Attachment #1: Type: text/plain, Size: 2571 bytes --]
s/op/pdev/ in xilinxfb_of_probe().
No functional chagnes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/video/xilinxfb.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 84c664e..123cd70 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -413,7 +413,7 @@ static int xilinxfb_release(struct device *dev)
* OF bus binding
*/
-static int xilinxfb_of_probe(struct platform_device *op)
+static int xilinxfb_of_probe(struct platform_device *pdev)
{
const u32 *prop;
u32 tft_access = 0;
@@ -427,7 +427,7 @@ static int xilinxfb_of_probe(struct platform_device *op)
/* Allocate the driver data region */
drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
- dev_err(&op->dev, "Couldn't allocate device private record\n");
+ dev_err(&pdev->dev, "Couldn't allocate device private record\n");
return -ENOMEM;
}
@@ -435,7 +435,7 @@ static int xilinxfb_of_probe(struct platform_device *op)
* To check whether the core is connected directly to DCR or BUS
* interface and initialize the tft_access accordingly.
*/
- of_property_read_u32(op->dev.of_node, "xlnx,dcr-splb-slave-if",
+ of_property_read_u32(pdev->dev.of_node, "xlnx,dcr-splb-slave-if",
&tft_access);
/*
@@ -459,29 +459,29 @@ static int xilinxfb_of_probe(struct platform_device *op)
}
#endif
- prop = of_get_property(op->dev.of_node, "phys-size", &size);
+ prop = of_get_property(pdev->dev.of_node, "phys-size", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.screen_width_mm = prop[0];
pdata.screen_height_mm = prop[1];
}
- prop = of_get_property(op->dev.of_node, "resolution", &size);
+ prop = of_get_property(pdev->dev.of_node, "resolution", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.xres = prop[0];
pdata.yres = prop[1];
}
- prop = of_get_property(op->dev.of_node, "virtual-resolution", &size);
+ prop = of_get_property(pdev->dev.of_node, "virtual-resolution", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.xvirt = prop[0];
pdata.yvirt = prop[1];
}
- if (of_find_property(op->dev.of_node, "rotate-display", NULL))
+ if (of_find_property(pdev->dev.of_node, "rotate-display", NULL))
pdata.rotate_screen = 1;
- dev_set_drvdata(&op->dev, drvdata);
- return xilinxfb_assign(op, drvdata, &pdata);
+ dev_set_drvdata(&pdev->dev, drvdata);
+ return xilinxfb_assign(pdev, drvdata, &pdata);
}
static int xilinxfb_of_remove(struct platform_device *op)
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] video: xilinxfb: Use devm_kzalloc instead of kzalloc
2013-09-12 5:54 ` Michal Simek
@ 2013-09-12 5:54 ` Michal Simek
-1 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-12 5:54 UTC (permalink / raw)
To: linux-kernel, monstr
Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1361 bytes --]
Simplify driver probe and release function.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/video/xilinxfb.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 123cd70..fd9c430 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -368,7 +368,6 @@ err_fbmem:
devm_iounmap(dev, drvdata->regs);
err_region:
- kfree(drvdata);
dev_set_drvdata(dev, NULL);
return rc;
@@ -403,7 +402,6 @@ static int xilinxfb_release(struct device *dev)
dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
#endif
- kfree(drvdata);
dev_set_drvdata(dev, NULL);
return 0;
@@ -425,7 +423,7 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
pdata = xilinx_fb_default_pdata;
/* Allocate the driver data region */
- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
dev_err(&pdev->dev, "Couldn't allocate device private record\n");
return -ENOMEM;
@@ -453,7 +451,6 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
if (!DCR_MAP_OK(drvdata->dcr_host)) {
dev_err(&op->dev, "invalid DCR address\n");
- kfree(drvdata);
return -ENODEV;
}
}
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] video: xilinxfb: Use devm_kzalloc instead of kzalloc
@ 2013-09-12 5:54 ` Michal Simek
0 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-12 5:54 UTC (permalink / raw)
To: linux-kernel, monstr
Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1361 bytes --]
Simplify driver probe and release function.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/video/xilinxfb.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 123cd70..fd9c430 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -368,7 +368,6 @@ err_fbmem:
devm_iounmap(dev, drvdata->regs);
err_region:
- kfree(drvdata);
dev_set_drvdata(dev, NULL);
return rc;
@@ -403,7 +402,6 @@ static int xilinxfb_release(struct device *dev)
dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
#endif
- kfree(drvdata);
dev_set_drvdata(dev, NULL);
return 0;
@@ -425,7 +423,7 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
pdata = xilinx_fb_default_pdata;
/* Allocate the driver data region */
- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
dev_err(&pdev->dev, "Couldn't allocate device private record\n");
return -ENOMEM;
@@ -453,7 +451,6 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
if (!DCR_MAP_OK(drvdata->dcr_host)) {
dev_err(&op->dev, "invalid DCR address\n");
- kfree(drvdata);
return -ENODEV;
}
}
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] video: xilinxfb: Simplify error path
2013-09-12 5:54 ` Michal Simek
@ 2013-09-12 5:54 ` Michal Simek
-1 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-12 5:54 UTC (permalink / raw)
To: linux-kernel, monstr
Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 2024 bytes --]
devm_iounmap is called automatically that's why remove it from the code
dev_set_drvdata(dev, NULL) is called by generic code
after device_release or on probe failure.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/video/xilinxfb.c | 28 ++++++----------------------
1 file changed, 6 insertions(+), 22 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index fd9c430..7e3036c 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -260,10 +260,9 @@ static int xilinxfb_assign(struct platform_device *pdev,
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drvdata->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(drvdata->regs)) {
- rc = PTR_ERR(drvdata->regs);
- goto err_region;
- }
+ if (IS_ERR(drvdata->regs))
+ return PTR_ERR(drvdata->regs);
+
drvdata->regs_phys = res->start;
}
@@ -279,11 +278,7 @@ static int xilinxfb_assign(struct platform_device *pdev,
if (!drvdata->fb_virt) {
dev_err(dev, "Could not allocate frame buffer memory\n");
- rc = -ENOMEM;
- if (drvdata->flags & BUS_ACCESS_FLAG)
- goto err_fbmem;
- else
- goto err_region;
+ return -ENOMEM;
}
/* Clear (turn to black) the framebuffer */
@@ -363,13 +358,6 @@ err_cmap:
/* Turn off the display */
xilinx_fb_out32(drvdata, REG_CTRL, 0);
-err_fbmem:
- if (drvdata->flags & BUS_ACCESS_FLAG)
- devm_iounmap(dev, drvdata->regs);
-
-err_region:
- dev_set_drvdata(dev, NULL);
-
return rc;
}
@@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
/* Turn off the display */
xilinx_fb_out32(drvdata, REG_CTRL, 0);
- /* Release the resources, as allocated based on interface */
- if (drvdata->flags & BUS_ACCESS_FLAG)
- devm_iounmap(dev, drvdata->regs);
#ifdef CONFIG_PPC_DCR
- else
+ /* Release the resources, as allocated based on interface */
+ if (!(drvdata->flags & BUS_ACCESS_FLAG))
dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
#endif
- dev_set_drvdata(dev, NULL);
-
return 0;
}
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-09-12 5:54 ` Michal Simek
0 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-12 5:54 UTC (permalink / raw)
To: linux-kernel, monstr
Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 2024 bytes --]
devm_iounmap is called automatically that's why remove it from the code
dev_set_drvdata(dev, NULL) is called by generic code
after device_release or on probe failure.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/video/xilinxfb.c | 28 ++++++----------------------
1 file changed, 6 insertions(+), 22 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index fd9c430..7e3036c 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -260,10 +260,9 @@ static int xilinxfb_assign(struct platform_device *pdev,
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drvdata->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(drvdata->regs)) {
- rc = PTR_ERR(drvdata->regs);
- goto err_region;
- }
+ if (IS_ERR(drvdata->regs))
+ return PTR_ERR(drvdata->regs);
+
drvdata->regs_phys = res->start;
}
@@ -279,11 +278,7 @@ static int xilinxfb_assign(struct platform_device *pdev,
if (!drvdata->fb_virt) {
dev_err(dev, "Could not allocate frame buffer memory\n");
- rc = -ENOMEM;
- if (drvdata->flags & BUS_ACCESS_FLAG)
- goto err_fbmem;
- else
- goto err_region;
+ return -ENOMEM;
}
/* Clear (turn to black) the framebuffer */
@@ -363,13 +358,6 @@ err_cmap:
/* Turn off the display */
xilinx_fb_out32(drvdata, REG_CTRL, 0);
-err_fbmem:
- if (drvdata->flags & BUS_ACCESS_FLAG)
- devm_iounmap(dev, drvdata->regs);
-
-err_region:
- dev_set_drvdata(dev, NULL);
-
return rc;
}
@@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
/* Turn off the display */
xilinx_fb_out32(drvdata, REG_CTRL, 0);
- /* Release the resources, as allocated based on interface */
- if (drvdata->flags & BUS_ACCESS_FLAG)
- devm_iounmap(dev, drvdata->regs);
#ifdef CONFIG_PPC_DCR
- else
+ /* Release the resources, as allocated based on interface */
+ if (!(drvdata->flags & BUS_ACCESS_FLAG))
dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
#endif
- dev_set_drvdata(dev, NULL);
-
return 0;
}
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] video: xilinxfb: Use devm_kzalloc instead of kzalloc
2013-09-12 5:54 ` Michal Simek
@ 2013-09-12 10:42 ` Jingoo Han
-1 siblings, 0 replies; 24+ messages in thread
From: Jingoo Han @ 2013-09-12 10:42 UTC (permalink / raw)
To: 'Michal Simek', linux-kernel, monstr
Cc: 'Jean-Christophe Plagniol-Villard',
'Tomi Valkeinen', linux-fbdev, 'Jingoo Han'
On Thursday, September 12, 2013 2:55 PM, Michal Simek wrote:
>
> Simplify driver probe and release function.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
> ---
> drivers/video/xilinxfb.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/3] video: xilinxfb: Use devm_kzalloc instead of kzalloc
@ 2013-09-12 10:42 ` Jingoo Han
0 siblings, 0 replies; 24+ messages in thread
From: Jingoo Han @ 2013-09-12 10:42 UTC (permalink / raw)
To: 'Michal Simek', linux-kernel, monstr
Cc: 'Jean-Christophe Plagniol-Villard',
'Tomi Valkeinen', linux-fbdev, 'Jingoo Han'
On Thursday, September 12, 2013 2:55 PM, Michal Simek wrote:
>
> Simplify driver probe and release function.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
> ---
> drivers/video/xilinxfb.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-09-12 5:54 ` Michal Simek
@ 2013-09-12 10:46 ` Jingoo Han
-1 siblings, 0 replies; 24+ messages in thread
From: Jingoo Han @ 2013-09-12 10:46 UTC (permalink / raw)
To: 'Michal Simek', linux-kernel, monstr
Cc: 'Jean-Christophe Plagniol-Villard',
'Tomi Valkeinen', linux-fbdev, 'Jingoo Han'
On Thursday, September 12, 2013 2:55 PM, Michal Simek wrote:
>
> devm_iounmap is called automatically that's why remove it from the code
> dev_set_drvdata(dev, NULL) is called by generic code
> after device_release or on probe failure.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
> ---
> drivers/video/xilinxfb.c | 28 ++++++----------------------
> 1 file changed, 6 insertions(+), 22 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-09-12 10:46 ` Jingoo Han
0 siblings, 0 replies; 24+ messages in thread
From: Jingoo Han @ 2013-09-12 10:46 UTC (permalink / raw)
To: 'Michal Simek', linux-kernel, monstr
Cc: 'Jean-Christophe Plagniol-Villard',
'Tomi Valkeinen', linux-fbdev, 'Jingoo Han'
On Thursday, September 12, 2013 2:55 PM, Michal Simek wrote:
>
> devm_iounmap is called automatically that's why remove it from the code
> dev_set_drvdata(dev, NULL) is called by generic code
> after device_release or on probe failure.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
> ---
> drivers/video/xilinxfb.c | 28 ++++++----------------------
> 1 file changed, 6 insertions(+), 22 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-09-12 5:54 ` Michal Simek
@ 2013-09-16 9:51 ` Tomi Valkeinen
-1 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-09-16 9:51 UTC (permalink / raw)
To: Michal Simek
Cc: linux-kernel, monstr, Jean-Christophe Plagniol-Villard, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 713 bytes --]
On 12/09/13 08:54, Michal Simek wrote:
> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
> /* Turn off the display */
> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>
> - /* Release the resources, as allocated based on interface */
> - if (drvdata->flags & BUS_ACCESS_FLAG)
> - devm_iounmap(dev, drvdata->regs);
> #ifdef CONFIG_PPC_DCR
> - else
> + /* Release the resources, as allocated based on interface */
> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
> #endif
I might be mistaken, and it's not strictly part of this series, but
shouldn't dcr_unmap be called somewhere else also, if the probe fails?
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-09-16 9:51 ` Tomi Valkeinen
0 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-09-16 9:51 UTC (permalink / raw)
To: Michal Simek
Cc: linux-kernel, monstr, Jean-Christophe Plagniol-Villard, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 713 bytes --]
On 12/09/13 08:54, Michal Simek wrote:
> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
> /* Turn off the display */
> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>
> - /* Release the resources, as allocated based on interface */
> - if (drvdata->flags & BUS_ACCESS_FLAG)
> - devm_iounmap(dev, drvdata->regs);
> #ifdef CONFIG_PPC_DCR
> - else
> + /* Release the resources, as allocated based on interface */
> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
> #endif
I might be mistaken, and it's not strictly part of this series, but
shouldn't dcr_unmap be called somewhere else also, if the probe fails?
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-09-16 9:51 ` Tomi Valkeinen
@ 2013-09-16 10:33 ` Michal Simek
-1 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-16 10:33 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1117 bytes --]
On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
> On 12/09/13 08:54, Michal Simek wrote:
>
>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>> /* Turn off the display */
>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>
>> - /* Release the resources, as allocated based on interface */
>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>> - devm_iounmap(dev, drvdata->regs);
>> #ifdef CONFIG_PPC_DCR
>> - else
>> + /* Release the resources, as allocated based on interface */
>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>> #endif
>
> I might be mistaken, and it's not strictly part of this series, but
> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
yes. It should.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-09-16 10:33 ` Michal Simek
0 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-16 10:33 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1117 bytes --]
On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
> On 12/09/13 08:54, Michal Simek wrote:
>
>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>> /* Turn off the display */
>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>
>> - /* Release the resources, as allocated based on interface */
>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>> - devm_iounmap(dev, drvdata->regs);
>> #ifdef CONFIG_PPC_DCR
>> - else
>> + /* Release the resources, as allocated based on interface */
>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>> #endif
>
> I might be mistaken, and it's not strictly part of this series, but
> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
yes. It should.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-09-16 10:33 ` Michal Simek
@ 2013-09-16 10:34 ` Tomi Valkeinen
-1 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-09-16 10:34 UTC (permalink / raw)
To: monstr
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 985 bytes --]
On 16/09/13 13:33, Michal Simek wrote:
> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>> On 12/09/13 08:54, Michal Simek wrote:
>>
>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>> /* Turn off the display */
>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>
>>> - /* Release the resources, as allocated based on interface */
>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>> - devm_iounmap(dev, drvdata->regs);
>>> #ifdef CONFIG_PPC_DCR
>>> - else
>>> + /* Release the resources, as allocated based on interface */
>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>> #endif
>>
>> I might be mistaken, and it's not strictly part of this series, but
>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>
> yes. It should.
Do you want me to apply these patches as they are, or do you want to
improve the series to include the dcr_unmap fix?
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-09-16 10:34 ` Tomi Valkeinen
0 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-09-16 10:34 UTC (permalink / raw)
To: monstr
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 985 bytes --]
On 16/09/13 13:33, Michal Simek wrote:
> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>> On 12/09/13 08:54, Michal Simek wrote:
>>
>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>> /* Turn off the display */
>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>
>>> - /* Release the resources, as allocated based on interface */
>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>> - devm_iounmap(dev, drvdata->regs);
>>> #ifdef CONFIG_PPC_DCR
>>> - else
>>> + /* Release the resources, as allocated based on interface */
>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>> #endif
>>
>> I might be mistaken, and it's not strictly part of this series, but
>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>
> yes. It should.
Do you want me to apply these patches as they are, or do you want to
improve the series to include the dcr_unmap fix?
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-09-16 10:34 ` Tomi Valkeinen
@ 2013-09-30 12:05 ` Michal Simek
-1 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-30 12:05 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1513 bytes --]
Hi Tomi,
On 09/16/2013 12:34 PM, Tomi Valkeinen wrote:
> On 16/09/13 13:33, Michal Simek wrote:
>> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>>> On 12/09/13 08:54, Michal Simek wrote:
>>>
>>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>>> /* Turn off the display */
>>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>>
>>>> - /* Release the resources, as allocated based on interface */
>>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>>> - devm_iounmap(dev, drvdata->regs);
>>>> #ifdef CONFIG_PPC_DCR
>>>> - else
>>>> + /* Release the resources, as allocated based on interface */
>>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>>> #endif
>>>
>>> I might be mistaken, and it's not strictly part of this series, but
>>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>>
>> yes. It should.
>
> Do you want me to apply these patches as they are, or do you want to
> improve the series to include the dcr_unmap fix?
Sorry I have missed this email.
Yes please apply it as is. I don't have ppc hw here to be able to test this
change.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-09-30 12:05 ` Michal Simek
0 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-09-30 12:05 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1513 bytes --]
Hi Tomi,
On 09/16/2013 12:34 PM, Tomi Valkeinen wrote:
> On 16/09/13 13:33, Michal Simek wrote:
>> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>>> On 12/09/13 08:54, Michal Simek wrote:
>>>
>>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>>> /* Turn off the display */
>>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>>
>>>> - /* Release the resources, as allocated based on interface */
>>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>>> - devm_iounmap(dev, drvdata->regs);
>>>> #ifdef CONFIG_PPC_DCR
>>>> - else
>>>> + /* Release the resources, as allocated based on interface */
>>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>>> #endif
>>>
>>> I might be mistaken, and it's not strictly part of this series, but
>>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>>
>> yes. It should.
>
> Do you want me to apply these patches as they are, or do you want to
> improve the series to include the dcr_unmap fix?
Sorry I have missed this email.
Yes please apply it as is. I don't have ppc hw here to be able to test this
change.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-09-30 12:05 ` Michal Simek
@ 2013-10-09 9:02 ` Tomi Valkeinen
-1 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-10-09 9:02 UTC (permalink / raw)
To: monstr
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]
On 30/09/13 15:05, Michal Simek wrote:
> Hi Tomi,
>
> On 09/16/2013 12:34 PM, Tomi Valkeinen wrote:
>> On 16/09/13 13:33, Michal Simek wrote:
>>> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>>>> On 12/09/13 08:54, Michal Simek wrote:
>>>>
>>>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>>>> /* Turn off the display */
>>>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>>>
>>>>> - /* Release the resources, as allocated based on interface */
>>>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>>>> - devm_iounmap(dev, drvdata->regs);
>>>>> #ifdef CONFIG_PPC_DCR
>>>>> - else
>>>>> + /* Release the resources, as allocated based on interface */
>>>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>>>> #endif
>>>>
>>>> I might be mistaken, and it's not strictly part of this series, but
>>>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>>>
>>> yes. It should.
>>
>> Do you want me to apply these patches as they are, or do you want to
>> improve the series to include the dcr_unmap fix?
>
> Sorry I have missed this email.
>
> Yes please apply it as is. I don't have ppc hw here to be able to test this
> change.
This series does not apply. Can you rebase on top of linux-next, and resend?
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-10-09 9:02 ` Tomi Valkeinen
0 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-10-09 9:02 UTC (permalink / raw)
To: monstr
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]
On 30/09/13 15:05, Michal Simek wrote:
> Hi Tomi,
>
> On 09/16/2013 12:34 PM, Tomi Valkeinen wrote:
>> On 16/09/13 13:33, Michal Simek wrote:
>>> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>>>> On 12/09/13 08:54, Michal Simek wrote:
>>>>
>>>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>>>> /* Turn off the display */
>>>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>>>
>>>>> - /* Release the resources, as allocated based on interface */
>>>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>>>> - devm_iounmap(dev, drvdata->regs);
>>>>> #ifdef CONFIG_PPC_DCR
>>>>> - else
>>>>> + /* Release the resources, as allocated based on interface */
>>>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>>>> #endif
>>>>
>>>> I might be mistaken, and it's not strictly part of this series, but
>>>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>>>
>>> yes. It should.
>>
>> Do you want me to apply these patches as they are, or do you want to
>> improve the series to include the dcr_unmap fix?
>
> Sorry I have missed this email.
>
> Yes please apply it as is. I don't have ppc hw here to be able to test this
> change.
This series does not apply. Can you rebase on top of linux-next, and resend?
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-10-09 9:02 ` Tomi Valkeinen
@ 2013-10-09 10:25 ` Michal Simek
-1 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-10-09 10:25 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: monstr, Michal Simek, linux-kernel,
Jean-Christophe Plagniol-Villard, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1886 bytes --]
On 10/09/2013 11:02 AM, Tomi Valkeinen wrote:
> On 30/09/13 15:05, Michal Simek wrote:
>> Hi Tomi,
>>
>> On 09/16/2013 12:34 PM, Tomi Valkeinen wrote:
>>> On 16/09/13 13:33, Michal Simek wrote:
>>>> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>>>>> On 12/09/13 08:54, Michal Simek wrote:
>>>>>
>>>>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>>>>> /* Turn off the display */
>>>>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>>>>
>>>>>> - /* Release the resources, as allocated based on interface */
>>>>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>>>>> - devm_iounmap(dev, drvdata->regs);
>>>>>> #ifdef CONFIG_PPC_DCR
>>>>>> - else
>>>>>> + /* Release the resources, as allocated based on interface */
>>>>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>>>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>>>>> #endif
>>>>>
>>>>> I might be mistaken, and it's not strictly part of this series, but
>>>>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>>>>
>>>> yes. It should.
>>>
>>> Do you want me to apply these patches as they are, or do you want to
>>> improve the series to include the dcr_unmap fix?
>>
>> Sorry I have missed this email.
>>
>> Yes please apply it as is. I don't have ppc hw here to be able to test this
>> change.
>
> This series does not apply. Can you rebase on top of linux-next, and resend?
Do you mean Stephen Rothwell linux-next or any your linux-next branch?
No problem to do so if you send me link to the repo.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-10-09 10:25 ` Michal Simek
0 siblings, 0 replies; 24+ messages in thread
From: Michal Simek @ 2013-10-09 10:25 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: monstr, Michal Simek, linux-kernel,
Jean-Christophe Plagniol-Villard, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1886 bytes --]
On 10/09/2013 11:02 AM, Tomi Valkeinen wrote:
> On 30/09/13 15:05, Michal Simek wrote:
>> Hi Tomi,
>>
>> On 09/16/2013 12:34 PM, Tomi Valkeinen wrote:
>>> On 16/09/13 13:33, Michal Simek wrote:
>>>> On 09/16/2013 11:51 AM, Tomi Valkeinen wrote:
>>>>> On 12/09/13 08:54, Michal Simek wrote:
>>>>>
>>>>>> @@ -394,16 +382,12 @@ static int xilinxfb_release(struct device *dev)
>>>>>> /* Turn off the display */
>>>>>> xilinx_fb_out32(drvdata, REG_CTRL, 0);
>>>>>>
>>>>>> - /* Release the resources, as allocated based on interface */
>>>>>> - if (drvdata->flags & BUS_ACCESS_FLAG)
>>>>>> - devm_iounmap(dev, drvdata->regs);
>>>>>> #ifdef CONFIG_PPC_DCR
>>>>>> - else
>>>>>> + /* Release the resources, as allocated based on interface */
>>>>>> + if (!(drvdata->flags & BUS_ACCESS_FLAG))
>>>>>> dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
>>>>>> #endif
>>>>>
>>>>> I might be mistaken, and it's not strictly part of this series, but
>>>>> shouldn't dcr_unmap be called somewhere else also, if the probe fails?
>>>>
>>>> yes. It should.
>>>
>>> Do you want me to apply these patches as they are, or do you want to
>>> improve the series to include the dcr_unmap fix?
>>
>> Sorry I have missed this email.
>>
>> Yes please apply it as is. I don't have ppc hw here to be able to test this
>> change.
>
> This series does not apply. Can you rebase on top of linux-next, and resend?
Do you mean Stephen Rothwell linux-next or any your linux-next branch?
No problem to do so if you send me link to the repo.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
2013-10-09 10:25 ` Michal Simek
@ 2013-10-09 10:28 ` Tomi Valkeinen
-1 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-10-09 10:28 UTC (permalink / raw)
To: monstr
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 393 bytes --]
On 09/10/13 13:25, Michal Simek wrote:
>> This series does not apply. Can you rebase on top of linux-next, and resend?
>
> Do you mean Stephen Rothwell linux-next or any your linux-next branch?
> No problem to do so if you send me link to the repo.
Either one, my for-next is in Stephen's tree:
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git for-next
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 3/3] video: xilinxfb: Simplify error path
@ 2013-10-09 10:28 ` Tomi Valkeinen
0 siblings, 0 replies; 24+ messages in thread
From: Tomi Valkeinen @ 2013-10-09 10:28 UTC (permalink / raw)
To: monstr
Cc: Michal Simek, linux-kernel, Jean-Christophe Plagniol-Villard,
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 393 bytes --]
On 09/10/13 13:25, Michal Simek wrote:
>> This series does not apply. Can you rebase on top of linux-next, and resend?
>
> Do you mean Stephen Rothwell linux-next or any your linux-next branch?
> No problem to do so if you send me link to the repo.
Either one, my for-next is in Stephen's tree:
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git for-next
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2013-10-09 10:28 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-09-12 5:54 [PATCH 1/3] video: xilinxfb: Use standard variable name convention Michal Simek
2013-09-12 5:54 ` Michal Simek
2013-09-12 5:54 ` [PATCH 2/3] video: xilinxfb: Use devm_kzalloc instead of kzalloc Michal Simek
2013-09-12 5:54 ` Michal Simek
2013-09-12 10:42 ` Jingoo Han
2013-09-12 10:42 ` Jingoo Han
2013-09-12 5:54 ` [PATCH 3/3] video: xilinxfb: Simplify error path Michal Simek
2013-09-12 5:54 ` Michal Simek
2013-09-12 10:46 ` Jingoo Han
2013-09-12 10:46 ` Jingoo Han
2013-09-16 9:51 ` Tomi Valkeinen
2013-09-16 9:51 ` Tomi Valkeinen
2013-09-16 10:33 ` Michal Simek
2013-09-16 10:33 ` Michal Simek
2013-09-16 10:34 ` Tomi Valkeinen
2013-09-16 10:34 ` Tomi Valkeinen
2013-09-30 12:05 ` Michal Simek
2013-09-30 12:05 ` Michal Simek
2013-10-09 9:02 ` Tomi Valkeinen
2013-10-09 9:02 ` Tomi Valkeinen
2013-10-09 10:25 ` Michal Simek
2013-10-09 10:25 ` Michal Simek
2013-10-09 10:28 ` Tomi Valkeinen
2013-10-09 10:28 ` Tomi Valkeinen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.