* [PATCH] selinux: move pkey sid cache based retrieval under defconfig
@ 2019-12-16 10:08 Ravi Kumar Siddojigari
2019-12-16 14:25 ` Paul Moore
0 siblings, 1 reply; 3+ messages in thread
From: Ravi Kumar Siddojigari @ 2019-12-16 10:08 UTC (permalink / raw)
To: selinux
Hi Team,
We see an increase in the memory consumption from 4.9 ->4.19 kernel which is
impacting the low_ram device .
So thought of enabling only that are really needed for the such device
where performance might not be of priority list .
One such patch is on the pkey sid cache which was added with commit :"
409dcf31"
which can be moved under defconfig where enabled by default and only
disabled for low_ram targets.
Which is going to save ram/reduce slub usage .
--
From 1719256bbb8fe3e239be0928386a50b7b41752e8 Mon Sep 17 00:00:00 2001
From: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
Date: Wed, 11 Dec 2019 19:57:24 +0530
Subject: [PATCH] selinux: move pkey sid cache based retrieval under
defconfig
.
adding new key CONFIG_FASTER_RETRIEVAL_PKEY_SID which is used to enable
cache based pkey sid retrieval code added with Commit 409dcf31.
As this is going to alloc a new cache for this booster which may impact
low ram devices . By default its enabled for low_ram targets
they can disable this feature.
Change-Id: I80a13fb7bce8723c8c880cb77cbaee42db413a7a
Signed-off-by: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
---
security/selinux/Kconfig | 10 ++++++++++
security/selinux/Makefile | 4 +++-
security/selinux/hooks.c | 10 ++++++++++
security/selinux/include/objsec.h | 2 ++
4 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig
index 8af7a69..7bcc015 100644
--- a/security/selinux/Kconfig
+++ b/security/selinux/Kconfig
@@ -99,3 +99,13 @@ config SECURITY_SELINUX_CHECKREQPROT_VALUE
via /selinux/checkreqprot if authorized by policy.
If you are unsure how to answer this question, answer 0.
+
+config FASTER_RETRIEVAL_PKEY_SID
+ bool "quicker retrieval of PKey SIDs"
+ depends on SECURITY_SELINUX
+ default y
+ help
+ This option enables cache for quicker retrieval of PKey SIDs
+ by storing the Pkey SIDs to cache.
+ Better performance but penalty on memory (RAM ).
+ for low ram devices better to say n.
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index c7161f8..192f4ba 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -6,12 +6,14 @@
obj-$(CONFIG_SECURITY_SELINUX) := selinux.o
selinux-y := avc.o hooks.o selinuxfs.o netlink.o nlmsgtab.o netif.o \
- netnode.o netport.o ibpkey.o exports.o \
+ netnode.o netport.o exports.o \
ss/ebitmap.o ss/hashtab.o ss/symtab.o ss/sidtab.o ss/avtab.o \
ss/policydb.o ss/services.o ss/conditional.o ss/mls.o
ss/status.o
selinux-$(CONFIG_SECURITY_NETWORK_XFRM) += xfrm.o
+selinux-$(CONFIG_FASTER_RETRIEVAL_PKEY_SID) += ibpkey.o
+
selinux-$(CONFIG_NETLABEL) += netlabel.o
ccflags-y := -I$(srctree)/security/selinux
-I$(srctree)/security/selinux/include
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index af030ff..60c4212 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -92,7 +92,11 @@
#include "netif.h"
#include "netnode.h"
#include "netport.h"
+
+#ifdef CONFIG_FASTER_RETRIEVAL_PKEY_SID
#include "ibpkey.h"
+#endif
+
#include "xfrm.h"
#include "netlabel.h"
#include "audit.h"
@@ -177,7 +181,9 @@ static int selinux_netcache_avc_callback(u32 event)
static int selinux_lsm_notifier_avc_callback(u32 event)
{
if (event == AVC_CALLBACK_RESET) {
+#ifdef CONFIG_FASTER_RETRIEVAL_PKEY_SID
sel_ib_pkey_flush();
+#endif
call_lsm_notifier(LSM_POLICY_CHANGE, NULL);
}
@@ -6246,7 +6252,11 @@ static int selinux_ib_pkey_access(void *ib_sec, u64
subnet_prefix, u16 pkey_val)
struct ib_security_struct *sec = ib_sec;
struct lsm_ibpkey_audit ibpkey;
+#ifdef CONFIG_FASTER_RETRIEVAL_PKEY_SID
err = sel_ib_pkey_sid(subnet_prefix, pkey_val, &sid);
+#else
+ err = security_ib_pkey_sid(subnet_prefix, pkey_val, &sid);
+#endif
if (err)
return err;
diff --git a/security/selinux/include/objsec.h
b/security/selinux/include/objsec.h
index 9cec304..5608978 100644
--- a/security/selinux/include/objsec.h
+++ b/security/selinux/include/objsec.h
@@ -147,11 +147,13 @@ struct ib_security_struct {
u32 sid; /* SID of the queue pair or MAD agent */
};
+#ifdef CONFIG_FASTER_RETRIEVAL_PKEY_SID
struct pkey_security_struct {
u64 subnet_prefix; /* Port subnet prefix */
u16 pkey; /* PKey number */
u32 sid; /* SID of pkey */
};
+#endif
struct bpf_security_struct {
u32 sid; /*SID of bpf obj creater*/
--
1.9.1
Regards,
Ravi
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] selinux: move pkey sid cache based retrieval under defconfig
2019-12-16 10:08 [PATCH] selinux: move pkey sid cache based retrieval under defconfig Ravi Kumar Siddojigari
@ 2019-12-16 14:25 ` Paul Moore
2019-12-17 15:11 ` Ravi Kumar Siddojigari
0 siblings, 1 reply; 3+ messages in thread
From: Paul Moore @ 2019-12-16 14:25 UTC (permalink / raw)
To: Ravi Kumar Siddojigari; +Cc: selinux
On Mon, Dec 16, 2019 at 5:13 AM Ravi Kumar Siddojigari
<rsiddoji@codeaurora.org> wrote:
> Hi Team,
> We see an increase in the memory consumption from 4.9 ->4.19 kernel which is
> impacting the low_ram device .
> So thought of enabling only that are really needed for the such device
> where performance might not be of priority list .
> One such patch is on the pkey sid cache which was added with commit :"
> 409dcf31"
> which can be moved under defconfig where enabled by default and only
> disabled for low_ram targets.
> Which is going to save ram/reduce slub usage .
Why not just reuse CONFIG_SECURITY_INFINIBAND? I'm guessing these
systems are using the SELinux/IB controls at all, so why not remove
them completely?
--
paul moore
www.paul-moore.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH] selinux: move pkey sid cache based retrieval under defconfig
2019-12-16 14:25 ` Paul Moore
@ 2019-12-17 15:11 ` Ravi Kumar Siddojigari
0 siblings, 0 replies; 3+ messages in thread
From: Ravi Kumar Siddojigari @ 2019-12-17 15:11 UTC (permalink / raw)
To: 'Paul Moore'; +Cc: selinux
Yes Paul, it should be under CONFIG_SECURITY_INFINIBAND thanks for correcting this .
Hope we can taken it fwd as all the targets with disabled InfiniBand can be gained .
Please find the updated path for review .
From 6a8c60eacd0b6e5189722bb1823864b6728c2e34 Mon Sep 17 00:00:00 2001
From: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
Date: Wed, 11 Dec 2019 19:57:24 +0530
Subject: [PATCH] selinux: move ibpkeys code under CONFIG_SECURITY_INFINIBAND.
Move cache based pkey sid retrieval code which was added
with Commit 409dcf31. under CONFIG_SECURITY_INFINIBAND.
As its going to alloc a new cache which may impact
low ram devices which was enabled by default.
Change-Id: I80a13fb7bce8723c8c880cb77cbaee42db413a7a
Signed-off-by: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
---
security/selinux/Makefile | 4 +++-
security/selinux/hooks.c | 6 ++++++
security/selinux/include/objsec.h | 2 ++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index c7161f8..bf67fc8 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -6,12 +6,14 @@
obj-$(CONFIG_SECURITY_SELINUX) := selinux.o
selinux-y := avc.o hooks.o selinuxfs.o netlink.o nlmsgtab.o netif.o \
- netnode.o netport.o ibpkey.o exports.o \
+ netnode.o netport.o exports.o \
ss/ebitmap.o ss/hashtab.o ss/symtab.o ss/sidtab.o ss/avtab.o \
ss/policydb.o ss/services.o ss/conditional.o ss/mls.o ss/status.o
selinux-$(CONFIG_SECURITY_NETWORK_XFRM) += xfrm.o
+selinux-$(CONFIG_SECURITY_INFINIBAND) += ibpkey.o
+
selinux-$(CONFIG_NETLABEL) += netlabel.o
ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index b1a9ac9..157faaf 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -94,7 +94,11 @@
#include "netif.h"
#include "netnode.h"
#include "netport.h"
+
+#ifdef CONFIG_SECURITY_INFINIBAND
#include "ibpkey.h"
+#endif
+
#include "xfrm.h"
#include "netlabel.h"
#include "audit.h"
@@ -198,7 +202,9 @@ static int selinux_netcache_avc_callback(u32 event)
static int selinux_lsm_notifier_avc_callback(u32 event)
{
if (event == AVC_CALLBACK_RESET) {
+#ifdef CONFIG_SECURITY_INFINIBAND
sel_ib_pkey_flush();
+#endif
call_lsm_notifier(LSM_POLICY_CHANGE, NULL);
}
diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h
index 4b0da5f..94e6322 100644
--- a/security/selinux/include/objsec.h
+++ b/security/selinux/include/objsec.h
@@ -149,11 +149,13 @@ struct ib_security_struct {
u32 sid; /* SID of the queue pair or MAD agent */
};
+#ifdef CONFIG_SECURITY_INFINIBAND
struct pkey_security_struct {
u64 subnet_prefix; /* Port subnet prefix */
u16 pkey; /* PKey number */
u32 sid; /* SID of pkey */
};
+#endif
struct bpf_security_struct {
u32 sid; /*SID of bpf obj creater*/
--
1.9.1
Regards,
Ravi
-----Original Message-----
From: selinux-owner@vger.kernel.org <selinux-owner@vger.kernel.org> On Behalf Of Paul Moore
Sent: Monday, December 16, 2019 7:56 PM
To: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
Cc: selinux@vger.kernel.org
Subject: Re: [PATCH] selinux: move pkey sid cache based retrieval under defconfig
On Mon, Dec 16, 2019 at 5:13 AM Ravi Kumar Siddojigari <rsiddoji@codeaurora.org> wrote:
> Hi Team,
> We see an increase in the memory consumption from 4.9 ->4.19 kernel
> which is impacting the low_ram device .
> So thought of enabling only that are really needed for the such
> device where performance might not be of priority list .
> One such patch is on the pkey sid cache which was added with commit :"
> 409dcf31"
> which can be moved under defconfig where enabled by default and only
> disabled for low_ram targets.
> Which is going to save ram/reduce slub usage .
Why not just reuse CONFIG_SECURITY_INFINIBAND? I'm guessing these systems are using the SELinux/IB controls at all, so why not remove them completely?
--
paul moore
www.paul-moore.com
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-12-17 15:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-16 10:08 [PATCH] selinux: move pkey sid cache based retrieval under defconfig Ravi Kumar Siddojigari
2019-12-16 14:25 ` Paul Moore
2019-12-17 15:11 ` Ravi Kumar Siddojigari
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.