* [Xenomai] Xenomai for Zynq
@ 2013-07-22 15:26 Kari Kumpulainen
2013-07-22 16:57 ` Lennart Sorensen
0 siblings, 1 reply; 6+ messages in thread
From: Kari Kumpulainen @ 2013-07-22 15:26 UTC (permalink / raw)
To: xenomai
Hello,
Which kernel and Xenomai versions should I use if I want to build Xenomai
support for a Zynq (Xilinx) chip?
I tried to patch the 3.5 kernel provided by Xilinx, but patching failed
because of conflicts in some files.
Br, Kari
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai for Zynq
2013-07-22 15:26 [Xenomai] Xenomai for Zynq Kari Kumpulainen
@ 2013-07-22 16:57 ` Lennart Sorensen
0 siblings, 0 replies; 6+ messages in thread
From: Lennart Sorensen @ 2013-07-22 16:57 UTC (permalink / raw)
To: Kari Kumpulainen; +Cc: xenomai
On Mon, Jul 22, 2013 at 06:26:14PM +0300, Kari Kumpulainen wrote:
> Which kernel and Xenomai versions should I use if I want to build Xenomai
> support for a Zynq (Xilinx) chip?
> I tried to patch the 3.5 kernel provided by Xilinx, but patching failed
> because of conflicts in some files.
I believe satndard practice is:
Get the kernel.org kernel with the version xenomai has a patch for,
then apply the xenomai patch, then add any extra patches needed for your
system, fixing any conflicts and issues that come up.
--
Len Sorensen
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai for Zynq
2013-07-22 19:00 ` Kari Kumpulainen
@ 2013-07-22 21:56 ` Matthew Fornero
0 siblings, 0 replies; 6+ messages in thread
From: Matthew Fornero @ 2013-07-22 21:56 UTC (permalink / raw)
To: Kari Kumpulainen; +Cc: xenomai
Yep-- that one should work. I made those instructions before a 3.8
ipipe patch was officially released, so the release number is bogus.
On Mon, Jul 22, 2013 at 3:00 PM, Kari Kumpulainen <k_olavi@ovi.com> wrote:
> Hi Matt,
>
> I can't locate "ipipe-core-3.8-arm-3.patch" mentioned in your instructions
> for 3.8 kernel.
> Did you mean " ipipe-core-3.8-arm-1.patch", in
> http://download.gna.org/adeos/patches/v3.x/arm/ ?
>
> Br, Kari
>
> -----Original Message-----
> From: xenomai-bounces@xenomai.org [mailto:xenomai-bounces@xenomai.org] On
> Behalf Of Kari Kumpulainen
> Sent: 22. heinäkuuta 2013 21:21
> To: xenomai@xenomai.org
> Subject: Re: [Xenomai] Xenomai for Zynq
>
> Great, thank you so much!
>
> Br, Kari
>
> -----Original Message-----
> From: xenomai-bounces@xenomai.org [mailto:xenomai-bounces@xenomai.org] On
> Behalf Of Matthew Fornero
> Sent: 22. heinäkuuta 2013 20:10
> To: xenomai@xenomai.org
> Subject: Re: [Xenomai] Xenomai for Zynq
>
> On Mon, Jul 22, 2013 at 11:26 AM, Kari Kumpulainen <k_olavi@ovi.com> wrote:
>> Hello,
>>
>> Which kernel and Xenomai versions should I use if I want to build
>> Xenomai support for a Zynq (Xilinx) chip?
>> I tried to patch the 3.5 kernel provided by Xilinx, but patching
>> failed because of conflicts in some files.
>
> There are a couple projects on github which should get you started.
> Note that I haven't updated either of these for a while:
>
> 3.5 based kernel: https://github.com/mfornero/ipipe This is a merge of the
> Xilinx 3.5 tree and the ipipe 3.5 tree. Both are now fairly out of date
>
> 3.8 based kernel: use the patches and readme found here:
> https://github.com/mfornero/xenomai/tree/for-upstream/ksrc/arch/arm/patches
>
> I believe the later will be merged into the Xenomai tree at some point.
>
> Best Regards,
>
> Matt Fornero
>
> _______________________________________________
> Xenomai mailing list
> Xenomai@xenomai.org
> http://www.xenomai.org/mailman/listinfo/xenomai
>
>
> _______________________________________________
> Xenomai mailing list
> Xenomai@xenomai.org
> http://www.xenomai.org/mailman/listinfo/xenomai
>
>
> _______________________________________________
> Xenomai mailing list
> Xenomai@xenomai.org
> http://www.xenomai.org/mailman/listinfo/xenomai
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai for Zynq
2013-07-22 18:20 ` Kari Kumpulainen
@ 2013-07-22 19:00 ` Kari Kumpulainen
2013-07-22 21:56 ` Matthew Fornero
0 siblings, 1 reply; 6+ messages in thread
From: Kari Kumpulainen @ 2013-07-22 19:00 UTC (permalink / raw)
To: xenomai
Hi Matt,
I can't locate "ipipe-core-3.8-arm-3.patch" mentioned in your instructions
for 3.8 kernel.
Did you mean " ipipe-core-3.8-arm-1.patch", in
http://download.gna.org/adeos/patches/v3.x/arm/ ?
Br, Kari
-----Original Message-----
From: xenomai-bounces@xenomai.org [mailto:xenomai-bounces@xenomai.org] On
Behalf Of Kari Kumpulainen
Sent: 22. heinäkuuta 2013 21:21
To: xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai for Zynq
Great, thank you so much!
Br, Kari
-----Original Message-----
From: xenomai-bounces@xenomai.org [mailto:xenomai-bounces@xenomai.org] On
Behalf Of Matthew Fornero
Sent: 22. heinäkuuta 2013 20:10
To: xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai for Zynq
On Mon, Jul 22, 2013 at 11:26 AM, Kari Kumpulainen <k_olavi@ovi.com> wrote:
> Hello,
>
> Which kernel and Xenomai versions should I use if I want to build
> Xenomai support for a Zynq (Xilinx) chip?
> I tried to patch the 3.5 kernel provided by Xilinx, but patching
> failed because of conflicts in some files.
There are a couple projects on github which should get you started.
Note that I haven't updated either of these for a while:
3.5 based kernel: https://github.com/mfornero/ipipe This is a merge of the
Xilinx 3.5 tree and the ipipe 3.5 tree. Both are now fairly out of date
3.8 based kernel: use the patches and readme found here:
https://github.com/mfornero/xenomai/tree/for-upstream/ksrc/arch/arm/patches
I believe the later will be merged into the Xenomai tree at some point.
Best Regards,
Matt Fornero
_______________________________________________
Xenomai mailing list
Xenomai@xenomai.org
http://www.xenomai.org/mailman/listinfo/xenomai
_______________________________________________
Xenomai mailing list
Xenomai@xenomai.org
http://www.xenomai.org/mailman/listinfo/xenomai
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai for Zynq
2013-07-22 17:10 Matthew Fornero
@ 2013-07-22 18:20 ` Kari Kumpulainen
2013-07-22 19:00 ` Kari Kumpulainen
0 siblings, 1 reply; 6+ messages in thread
From: Kari Kumpulainen @ 2013-07-22 18:20 UTC (permalink / raw)
To: xenomai
Great, thank you so much!
Br, Kari
-----Original Message-----
From: xenomai-bounces@xenomai.org [mailto:xenomai-bounces@xenomai.org] On
Behalf Of Matthew Fornero
Sent: 22. heinäkuuta 2013 20:10
To: xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai for Zynq
On Mon, Jul 22, 2013 at 11:26 AM, Kari Kumpulainen <k_olavi@ovi.com> wrote:
> Hello,
>
> Which kernel and Xenomai versions should I use if I want to build
> Xenomai support for a Zynq (Xilinx) chip?
> I tried to patch the 3.5 kernel provided by Xilinx, but patching
> failed because of conflicts in some files.
There are a couple projects on github which should get you started.
Note that I haven't updated either of these for a while:
3.5 based kernel: https://github.com/mfornero/ipipe This is a merge of the
Xilinx 3.5 tree and the ipipe 3.5 tree. Both are now fairly out of date
3.8 based kernel: use the patches and readme found here:
https://github.com/mfornero/xenomai/tree/for-upstream/ksrc/arch/arm/patches
I believe the later will be merged into the Xenomai tree at some point.
Best Regards,
Matt Fornero
_______________________________________________
Xenomai mailing list
Xenomai@xenomai.org
http://www.xenomai.org/mailman/listinfo/xenomai
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai for Zynq
@ 2013-07-22 17:10 Matthew Fornero
2013-07-22 18:20 ` Kari Kumpulainen
0 siblings, 1 reply; 6+ messages in thread
From: Matthew Fornero @ 2013-07-22 17:10 UTC (permalink / raw)
To: xenomai
On Mon, Jul 22, 2013 at 11:26 AM, Kari Kumpulainen <k_olavi@ovi.com> wrote:
> Hello,
>
> Which kernel and Xenomai versions should I use if I want to build Xenomai
> support for a Zynq (Xilinx) chip?
> I tried to patch the 3.5 kernel provided by Xilinx, but patching failed
> because of conflicts in some files.
There are a couple projects on github which should get you started.
Note that I haven't updated either of these for a while:
3.5 based kernel: https://github.com/mfornero/ipipe
This is a merge of the Xilinx 3.5 tree and the ipipe 3.5 tree. Both
are now fairly out of date
3.8 based kernel: use the patches and readme found here:
https://github.com/mfornero/xenomai/tree/for-upstream/ksrc/arch/arm/patches
I believe the later will be merged into the Xenomai tree at some point.
Best Regards,
Matt Fornero
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-07-22 21:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-22 15:26 [Xenomai] Xenomai for Zynq Kari Kumpulainen
2013-07-22 16:57 ` Lennart Sorensen
2013-07-22 17:10 Matthew Fornero
2013-07-22 18:20 ` Kari Kumpulainen
2013-07-22 19:00 ` Kari Kumpulainen
2013-07-22 21:56 ` Matthew Fornero
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.