All of lore.kernel.org
 help / color / mirror / Atom feed
* Sony MSAC-US70 Mouse in Redhat 8
@ 2005-03-12 23:10 bj
  2005-03-13 15:49 ` Ray Olszewski
  0 siblings, 1 reply; 2+ messages in thread
From: bj @ 2005-03-12 23:10 UTC (permalink / raw)
  To: linux-newbie

[-- Attachment #1: Type: text/plain, Size: 403 bytes --]

Hi !

I am using Red Hat 8 with kernel 2.4.20-30.8.legacy.

I got a new Sony  Reader/writer Optical Mouse .

How do I detect it in Red Hat 8.0

I did the following :-

modprobe input 
modprobe hid
modrprobe mousedev 

These kernel modules are loaded without error .

But still my usb mouse is not detected . 

Attached are my dmesg and message . 

Thank you for your help in advance. 

Cheers,
bj

  



[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 8653 bytes --]

Linux version 2.4.20-30.8.legacy (legacy@yoda.loki.me) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Feb 20 17:47:48 PST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdb=ide-scsi
ide_setup: hdb=ide-scsi
Initializing CPU#0
Detected 2393.995 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4771.02 BogoMIPS
Memory: 511516k/524224k available (1340k kernel code, 10148k reserved, 999k data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:DMA
hda: ST360020A, ATA DISK drive
hdb: SONY CD-RW CRX1611, ATAPI CD/DVD-ROM drive
blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
hdd: ST380011A, ATA DISK drive
blk: queue c03a6808, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
hdd: attached ide-disk driver.
hdd: host protected area => 1
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
 hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
hdb: DMA disabled
ide0: reset: success
 hda1 hda2 hda3 hda4 < hda5 hda6 >
 hdd: hdd1 hdd2 < hdd5 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 126k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 128k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:10.3
PCI: Sharing IRQ 5 with 00:0c.0
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 5, pci mem e0849000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:10.3 PCI cache line size corrected to 128.
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 1052248k swap-space (priority -1)
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdb: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: SONY      Model: CD-RW CRX1611     Rev: TYS3
  Type:   CD-ROM                             ANSI SCSI revision: 02
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
microcode: CPU0 no microcode found! (sig=f27, pflags=4)
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ip_tables: (C) 2000-2002 Netfilter core team
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:10.1
ttySHSF0 at I/O 0xc000 (irq = 11) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2002)
PCI: Found IRQ 5 for device 00:0c.0
PCI: Sharing IRQ 5 with 00:10.3
0000000.909: <7>^^^^^ SPIKE_NOT_FOUND ^^^^^^ LoopBackSpikeThreshold=-17000
ttySHSF1 at I/O 0xc800 (irq = 5) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2004)
0000001.336: <7>^^^^^ SPIKE_NOT_FOUND ^^^^^^ LoopBackSpikeThreshold=-17000
usb.c: registered new driver hsfusbcd2
via-rhine.c:v1.10-LK1.1.17  March-1-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 11 for device 00:12.0
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 00:10.0
divert: allocating divert_blk for eth0
eth0: VIA VT6102 Rhine-II at 0xe400, 00:50:70:c4:10:77, IRQ 11.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 12 for device 00:0b.0
PCI: Sharing IRQ 12 with 00:10.2
PCI: Sharing IRQ 12 with 00:11.5
divert: allocating divert_blk for eth1
eth1: RealTek RTL-8029 found at 0xc400, IRQ 12, 52:54:AB:3E:DC:78.

[-- Attachment #3: messages.txt --]
[-- Type: text/plain, Size: 34413 bytes --]

Mar 11 09:59:12 HOME syslogd 1.4.1: restart.
Mar 11 10:01:51 HOME kernel: cnxthsf_OsFloatSuffix: Id=4 used bit was FALSE !
Mar 11 10:06:33 HOME shutdown: shutting down for system reboot
Mar 11 10:06:33 HOME init: Switching to runlevel: 6
Mar 11 10:06:33 HOME login(pam_unix)[916]: session closed for user root
Mar 11 10:06:34 HOME anacron: anacron shutdown succeeded
Mar 11 10:06:35 HOME atd: atd shutdown succeeded
Mar 11 10:06:35 HOME rc: Stopping keytable:  succeeded
Mar 11 10:06:35 HOME gpm: gpm shutdown succeeded
Mar 11 10:06:35 HOME sshd: sshd -TERM succeeded
Mar 11 10:06:35 HOME sendmail: sendmail shutdown succeeded
Mar 11 10:06:35 HOME sendmail: sm-client shutdown succeeded
Mar 11 10:06:35 HOME xinetd[816]: Exiting...
Mar 11 10:06:35 HOME xinetd: xinetd shutdown succeeded
Mar 11 10:06:35 HOME crond: crond shutdown succeeded
Mar 11 10:06:35 HOME apmd[764]: Exiting
Mar 11 10:06:36 HOME apmd: apmd shutdown succeeded
Mar 11 10:06:37 HOME dd: 1+0 records in
Mar 11 10:06:37 HOME dd: 1+0 records out
Mar 11 10:06:37 HOME random: Saving random seed:  succeeded
Mar 11 10:06:37 HOME rpc.statd[682]: Caught signal 15, un-registering and exiting.
Mar 11 10:06:37 HOME nfslock: rpc.statd shutdown succeeded
Mar 11 10:06:37 HOME portmap: portmap shutdown succeeded
Mar 11 10:06:37 HOME kernel: Kernel logging (proc) stopped.
Mar 11 10:06:37 HOME kernel: Kernel log daemon terminating.
Mar 11 10:06:38 HOME syslog: klogd shutdown succeeded
Mar 11 10:06:38 HOME exiting on signal 15
Mar 11 10:08:15 HOME syslogd 1.4.1: restart.
Mar 11 10:08:15 HOME syslog: syslogd startup succeeded
Mar 11 10:08:15 HOME kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 11 10:08:15 HOME kernel: Linux version 2.4.20-30.8.legacy (legacy@yoda.loki.me) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Feb 20 17:47:48 PST 2004
Mar 11 10:08:15 HOME kernel: BIOS-provided physical RAM map:
Mar 11 10:08:15 HOME kernel:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Mar 11 10:08:15 HOME kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 11 10:08:15 HOME kernel:  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar 11 10:08:15 HOME kernel:  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Mar 11 10:08:15 HOME kernel:  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Mar 11 10:08:15 HOME kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar 11 10:08:15 HOME kernel: 0MB HIGHMEM available.
Mar 11 10:08:15 HOME kernel: 511MB LOWMEM available.
Mar 11 10:08:15 HOME kernel: On node 0 totalpages: 131056
Mar 11 10:08:15 HOME syslog: klogd startup succeeded
Mar 11 10:08:15 HOME kernel: zone(0): 4096 pages.
Mar 11 10:08:15 HOME kernel: zone(1): 126960 pages.
Mar 11 10:08:15 HOME portmap: portmap startup succeeded
Mar 11 10:08:15 HOME kernel: zone(2): 0 pages.
Mar 11 10:08:15 HOME kernel: Kernel command line: ro root=LABEL=/ hdb=ide-scsi
Mar 11 10:08:15 HOME kernel: ide_setup: hdb=ide-scsi
Mar 11 10:08:15 HOME nfslock: rpc.statd startup succeeded
Mar 11 10:08:15 HOME rpc.statd[684]: Version 1.0.1 Starting
Mar 11 10:08:15 HOME kernel: Initializing CPU#0
Mar 11 10:08:15 HOME keytable: Loading keymap: 
Mar 11 10:08:15 HOME kernel: Detected 2393.995 MHz processor.
Mar 11 10:08:15 HOME keytable: 
Mar 11 10:08:15 HOME kernel: Console: colour VGA+ 80x25
Mar 11 10:08:15 HOME keytable: 
Mar 11 10:08:16 HOME kernel: Calibrating delay loop... 4771.02 BogoMIPS
Mar 11 10:08:16 HOME rc: Starting keytable:  succeeded
Mar 11 10:08:16 HOME kernel: Memory: 511516k/524224k available (1340k kernel code, 10148k reserved, 999k data, 128k init, 0k highmem)
Mar 11 10:08:16 HOME kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Mar 11 10:08:16 HOME random: Initializing random number generator:  succeeded
Mar 11 10:08:16 HOME kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 11 10:08:16 HOME kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 11 10:08:16 HOME kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 11 10:08:16 HOME rc: Starting pcmcia:  succeeded
Mar 11 10:08:16 HOME kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 11 10:08:16 HOME kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 11 10:08:16 HOME netfs: Mounting other filesystems:  succeeded
Mar 11 10:08:16 HOME kernel: CPU: L2 cache: 512K
Mar 11 10:08:16 HOME kernel: Intel machine check architecture supported.
Mar 11 10:08:12 HOME ifup:  failed; no link present.  Check cable? 
Mar 11 10:08:16 HOME apmd[766]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16)
Mar 11 10:08:16 HOME apmd: apmd startup succeeded
Mar 11 10:08:17 HOME kernel: Intel machine check reporting enabled on CPU#0.
Mar 11 10:08:12 HOME network: Bringing up interface eth0:  failed 
Mar 11 10:08:17 HOME autofs: automount startup succeeded
Mar 11 10:08:17 HOME kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Mar 11 10:08:17 HOME sshd: Starting sshd:
Mar 11 10:08:17 HOME kernel: Enabling fast FPU save and restore... done.
Mar 11 10:08:18 HOME kernel: Enabling unmasked SIMD FPU exception support... done.
Mar 11 10:08:18 HOME kernel: Checking 'hlt' instruction... OK.
Mar 11 10:08:18 HOME kernel: POSIX conformance testing by UNIFIX
Mar 11 10:08:18 HOME kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Mar 11 10:08:18 HOME apmd[766]: Charge: * * * (-1% unknown)
Mar 11 10:08:18 HOME kernel: mtrr: detected mtrr type: Intel
Mar 11 10:08:18 HOME kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1
Mar 11 10:08:18 HOME kernel: PCI: Using configuration type 1
Mar 11 10:08:18 HOME kernel: PCI: Probing PCI hardware
Mar 11 10:08:18 HOME kernel: PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Mar 11 10:08:18 HOME kernel: isapnp: Scanning for PnP cards...
Mar 11 10:08:19 HOME kernel: isapnp: No Plug & Play device found
Mar 11 10:08:19 HOME kernel: Linux NET4.0 for Linux 2.4
Mar 11 10:08:19 HOME kernel: Based upon Swansea University Computer Society NET3.039
Mar 11 10:08:19 HOME kernel: Initializing RT netlink socket
Mar 11 10:08:19 HOME kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Mar 11 10:08:19 HOME kernel: Starting kswapd
Mar 11 10:08:19 HOME kernel: VFS: Disk quotas vdquot_6.5.1
Mar 11 10:08:19 HOME kernel: Detected PS/2 Mouse Port.
Mar 11 10:08:19 HOME sshd:  succeeded
Mar 11 10:08:19 HOME kernel: pty: 2048 Unix98 ptys configured
Mar 11 10:08:19 HOME sshd: 
Mar 11 10:08:19 HOME kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Mar 11 10:08:19 HOME rc: Starting sshd:  succeeded
Mar 11 10:08:19 HOME kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Mar 11 10:08:19 HOME kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Mar 11 10:08:19 HOME kernel: Real Time Clock Driver v1.10e
Mar 11 10:08:20 HOME kernel: Floppy drive(s): fd0 is 1.44M
Mar 11 10:08:20 HOME kernel: FDC 0 is a post-1991 82077
Mar 11 10:08:20 HOME kernel: NET4: Frame Diverter 0.46
Mar 11 10:08:20 HOME kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Mar 11 10:08:20 HOME kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
Mar 11 10:08:20 HOME kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 11 10:08:20 HOME kernel: VP_IDE: IDE controller at PCI slot 00:11.1
Mar 11 10:08:20 HOME kernel: VP_IDE: chipset revision 6
Mar 11 10:08:21 HOME kernel: VP_IDE: not 100%% native mode: will probe irqs later
Mar 11 10:08:21 HOME kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
Mar 11 10:08:21 HOME kernel:     ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
Mar 11 10:08:21 HOME kernel:     ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:DMA
Mar 11 10:08:21 HOME kernel: hda: ST360020A, ATA DISK drive
Mar 11 10:08:21 HOME kernel: hdb: SONY CD-RW CRX1611, ATAPI CD/DVD-ROM drive
Mar 11 10:08:21 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
Mar 11 10:08:21 HOME kernel: hdd: ST380011A, ATA DISK drive
Mar 11 10:08:21 HOME kernel: blk: queue c03a6808, I/O limit 4095Mb (mask 0xffffffff)
Mar 11 10:08:21 HOME kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 11 10:08:21 HOME kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 11 10:08:21 HOME kernel: hda: attached ide-disk driver.
Mar 11 10:08:21 HOME kernel: hda: host protected area => 1
Mar 11 10:08:21 HOME kernel: hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
Mar 11 10:08:21 HOME kernel: hdd: attached ide-disk driver.
Mar 11 10:08:21 HOME kernel: hdd: host protected area => 1
Mar 11 10:08:21 HOME kernel: hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Mar 11 10:08:21 HOME kernel: ide-floppy driver 0.99.newide
Mar 11 10:08:21 HOME kernel: Partition check:
Mar 11 10:08:21 HOME kernel:  hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:22 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
Mar 11 10:08:22 HOME kernel: hdb: DMA disabled
Mar 11 10:08:22 HOME kernel: ide0: reset: success
Mar 11 10:08:22 HOME kernel:  hda1 hda2 hda3 hda4 < hda5 hda6 >
Mar 11 10:08:22 HOME kernel:  hdd: hdd1 hdd2 < hdd5 >
Mar 11 10:08:22 HOME kernel: ide-floppy driver 0.99.newide
Mar 11 10:08:22 HOME kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 11 10:08:22 HOME kernel: md: Autodetecting RAID arrays.
Mar 11 10:08:22 HOME kernel: md: autorun ...
Mar 11 10:08:22 HOME kernel: md: ... autorun DONE.
Mar 11 10:08:22 HOME kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 11 10:08:22 HOME kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 11 10:08:22 HOME kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Mar 11 10:08:22 HOME kernel: TCP: Hash tables configured (established 32768 bind 65536)
Mar 11 10:08:22 HOME kernel: Linux IP multicast router 0.06 plus PIM-SM
Mar 11 10:08:22 HOME kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 11 10:08:22 HOME kernel: RAMDISK: Compressed image found at block 0
Mar 11 10:08:22 HOME kernel: Freeing initrd memory: 126k freed
Mar 11 10:08:22 HOME kernel: VFS: Mounted root (ext2 filesystem).
Mar 11 10:08:22 HOME kernel: Journalled Block Device driver loaded
Mar 11 10:08:22 HOME kernel: kjournald starting.  Commit interval 5 seconds
Mar 11 10:08:22 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 11 10:08:22 HOME kernel: Freeing unused kernel memory: 128k freed
Mar 11 10:08:22 HOME kernel: usb.c: registered new driver usbdevfs
Mar 11 10:08:22 HOME kernel: usb.c: registered new driver hub
Mar 11 10:08:22 HOME kernel: PCI: Found IRQ 5 for device 00:10.3
Mar 11 10:08:22 HOME kernel: PCI: Sharing IRQ 5 with 00:0c.0
Mar 11 10:08:22 HOME kernel: ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
Mar 11 10:08:23 HOME kernel: ehci-hcd 00:10.3: irq 5, pci mem e0849000
Mar 11 10:08:23 HOME kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 11 10:08:23 HOME kernel: PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
Mar 11 10:08:23 HOME kernel: PCI: 00:10.3 PCI cache line size corrected to 128.
Mar 11 10:08:23 HOME kernel: ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
Mar 11 10:08:23 HOME kernel: hub.c: USB hub found
Mar 11 10:08:23 HOME kernel: hub.c: 6 ports detected
Mar 11 10:08:23 HOME kernel: usb.c: registered new driver hiddev
Mar 11 10:08:23 HOME kernel: usb.c: registered new driver hid
Mar 11 10:08:23 HOME kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Mar 11 10:08:23 HOME kernel: hid-core.c: USB HID support drivers
Mar 11 10:08:23 HOME kernel: mice: PS/2 mouse device common for all mice
Mar 11 10:08:23 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Mar 11 10:08:23 HOME kernel: Adding Swap: 1052248k swap-space (priority -1)
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:23 HOME xinetd: xinetd startup succeeded
Mar 11 10:08:23 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 11 10:08:24 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 11 10:08:24 HOME kernel: ide0: reset: success
Mar 11 10:08:24 HOME kernel: kjournald starting.  Commit interval 5 seconds
Mar 11 10:08:24 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Mar 11 10:08:24 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 11 10:08:24 HOME kernel: kjournald starting.  Commit interval 5 seconds
Mar 11 10:08:24 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Mar 11 10:08:24 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 11 10:08:24 HOME kernel: SCSI subsystem driver Revision: 1.00
Mar 11 10:08:24 HOME kernel: hdb: attached ide-scsi driver.
Mar 11 10:08:24 HOME kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Mar 11 10:08:24 HOME kernel:   Vendor: SONY      Model: CD-RW CRX1611     Rev: TYS3
Mar 11 10:08:24 HOME kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Mar 11 10:08:24 HOME kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Mar 11 10:08:25 HOME kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Mar 11 10:08:25 HOME kernel: ip_tables: (C) 2000-2002 Netfilter core team
Mar 11 10:08:25 HOME kernel: PCI: Found IRQ 11 for device 00:0a.0
Mar 11 10:08:25 HOME kernel: PCI: Sharing IRQ 11 with 00:10.1
Mar 11 10:08:25 HOME kernel: ttySHSF0 at I/O 0xc000 (irq = 11) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2002)
Mar 11 10:08:25 HOME kernel: PCI: Found IRQ 5 for device 00:0c.0
Mar 11 10:08:25 HOME kernel: PCI: Sharing IRQ 5 with 00:10.3
Mar 11 10:08:26 HOME kernel: ttySHSF1 at I/O 0xc800 (irq = 5) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2004)
Mar 11 10:08:26 HOME kernel: usb.c: registered new driver hsfusbcd2
Mar 11 10:08:26 HOME kernel: via-rhine.c:v1.10-LK1.1.17  March-1-2003  Written by Donald Becker
Mar 11 10:08:26 HOME kernel:   http://www.scyld.com/network/via-rhine.html
Mar 11 10:08:26 HOME kernel: PCI: Found IRQ 11 for device 00:12.0
Mar 11 10:08:26 HOME kernel: PCI: Sharing IRQ 11 with 00:0d.0
Mar 11 10:08:26 HOME kernel: PCI: Sharing IRQ 11 with 00:10.0
Mar 11 10:08:26 HOME kernel: eth0: VIA VT6102 Rhine-II at 0xe400, 00:50:70:c4:10:77, IRQ 11.
Mar 11 10:08:26 HOME kernel: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
Mar 11 10:08:26 HOME kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
Mar 11 10:08:26 HOME kernel:   http://www.scyld.com/network/ne2k-pci.html
Mar 11 10:08:27 HOME kernel: PCI: Found IRQ 12 for device 00:0b.0
Mar 11 10:08:27 HOME kernel: PCI: Sharing IRQ 12 with 00:10.2
Mar 11 10:08:27 HOME kernel: PCI: Sharing IRQ 12 with 00:11.5
Mar 11 10:08:27 HOME kernel: eth1: RealTek RTL-8029 found at 0xc400, IRQ 12, 52:54:AB:3E:DC:78.
Mar 11 10:08:29 HOME xinetd[818]: xinetd Version 2.3.7 started with libwrap options compiled in.
Mar 11 10:08:29 HOME xinetd[818]: Started working: 1 available service
Mar 11 10:08:29 HOME sendmail: sendmail startup succeeded
Mar 11 10:08:30 HOME sendmail: sm-client startup succeeded
Mar 11 10:08:30 HOME gpm[860]: oops() invoked from gpm.c(978)
Mar 11 10:08:30 HOME gpm[860]: /dev/mouse: No such file or directory
Mar 11 10:08:30 HOME gpm: gpm startup succeeded
Mar 11 10:08:30 HOME crond: crond startup succeeded
Mar 11 10:08:31 HOME xfs: xfs startup failed
Mar 11 10:08:31 HOME anacron: anacron startup succeeded
Mar 11 10:08:31 HOME atd: atd startup succeeded
Mar 11 10:08:31 HOME wine: Registering binary handler for Windows applications
Mar 11 10:08:31 HOME rc: Starting wine:  succeeded
Mar 11 10:08:36 HOME login(pam_unix)[918]: authentication failure; logname=LOGIN uid=0 euid=0 tty=tty1 ruser= rhost=  user=root
Mar 11 10:08:38 HOME login[918]: FAILED LOGIN 1 FROM (null) FOR root, Authentication failure
Mar 11 10:08:40 HOME login(pam_unix)[918]: session opened for user root by LOGIN(uid=0)
Mar 11 10:08:41 HOME  -- root[918]: ROOT LOGIN ON tty1
Mar 11 10:14:33 HOME shutdown: shutting down for system halt
Mar 11 10:14:33 HOME init: Switching to runlevel: 0
Mar 11 10:14:33 HOME login(pam_unix)[918]: session closed for user root
Mar 11 10:14:34 HOME anacron: anacron shutdown succeeded
Mar 11 10:14:35 HOME atd: atd shutdown succeeded
Mar 11 10:14:35 HOME rc: Stopping keytable:  succeeded
Mar 11 10:14:35 HOME gpm: gpm shutdown failed
Mar 11 10:14:35 HOME sshd: sshd -TERM succeeded
Mar 11 10:14:35 HOME sendmail: sendmail shutdown succeeded
Mar 11 10:14:35 HOME sendmail: sm-client shutdown succeeded
Mar 11 10:14:35 HOME xinetd[818]: Exiting...
Mar 11 10:14:35 HOME xinetd: xinetd shutdown succeeded
Mar 11 10:14:35 HOME crond: crond shutdown succeeded
Mar 11 10:14:35 HOME apmd[766]: Exiting
Mar 11 10:14:36 HOME apmd: apmd shutdown succeeded
Mar 11 10:14:36 HOME dd: 1+0 records in
Mar 11 10:14:36 HOME dd: 1+0 records out
Mar 11 10:14:36 HOME random: Saving random seed:  succeeded
Mar 11 10:14:37 HOME rpc.statd[684]: Caught signal 15, un-registering and exiting.
Mar 11 10:14:37 HOME nfslock: rpc.statd shutdown succeeded
Mar 11 10:14:37 HOME portmap: portmap shutdown succeeded
Mar 11 10:14:37 HOME kernel: Kernel logging (proc) stopped.
Mar 11 10:14:37 HOME kernel: Kernel log daemon terminating.
Mar 11 10:14:38 HOME syslog: klogd shutdown succeeded
Mar 11 10:14:38 HOME exiting on signal 15
Mar 12 20:26:25 HOME syslogd 1.4.1: restart.
Mar 12 20:26:25 HOME syslog: syslogd startup succeeded
Mar 12 20:26:25 HOME kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 12 20:26:25 HOME kernel: Linux version 2.4.20-30.8.legacy (legacy@yoda.loki.me) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Feb 20 17:47:48 PST 2004
Mar 12 20:26:25 HOME kernel: BIOS-provided physical RAM map:
Mar 12 20:26:25 HOME kernel:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Mar 12 20:26:25 HOME kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 12 20:26:25 HOME kernel:  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar 12 20:26:25 HOME kernel:  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Mar 12 20:26:25 HOME kernel:  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Mar 12 20:26:25 HOME kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar 12 20:26:25 HOME kernel: 0MB HIGHMEM available.
Mar 12 20:26:25 HOME kernel: 511MB LOWMEM available.
Mar 12 20:26:25 HOME kernel: On node 0 totalpages: 131056
Mar 12 20:26:25 HOME syslog: klogd startup succeeded
Mar 12 20:26:25 HOME kernel: zone(0): 4096 pages.
Mar 12 20:26:25 HOME kernel: zone(1): 126960 pages.
Mar 12 20:26:25 HOME portmap: portmap startup succeeded
Mar 12 20:26:25 HOME kernel: zone(2): 0 pages.
Mar 12 20:26:26 HOME kernel: Kernel command line: ro root=LABEL=/ hdb=ide-scsi
Mar 12 20:26:26 HOME nfslock: rpc.statd startup succeeded
Mar 12 20:26:26 HOME rpc.statd[682]: Version 1.0.1 Starting
Mar 12 20:26:26 HOME kernel: ide_setup: hdb=ide-scsi
Mar 12 20:26:26 HOME keytable: Loading keymap: 
Mar 12 20:26:26 HOME kernel: Initializing CPU#0
Mar 12 20:26:26 HOME keytable: 
Mar 12 20:26:26 HOME kernel: Detected 2393.995 MHz processor.
Mar 12 20:26:26 HOME keytable: 
Mar 12 20:26:26 HOME kernel: Console: colour VGA+ 80x25
Mar 12 20:26:26 HOME rc: Starting keytable:  succeeded
Mar 12 20:26:26 HOME kernel: Calibrating delay loop... 4771.02 BogoMIPS
Mar 12 20:26:26 HOME kernel: Memory: 511516k/524224k available (1340k kernel code, 10148k reserved, 999k data, 128k init, 0k highmem)
Mar 12 20:26:26 HOME random: Initializing random number generator:  succeeded
Mar 12 20:26:26 HOME kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Mar 12 20:26:26 HOME kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 12 20:26:26 HOME kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 12 20:26:26 HOME rc: Starting pcmcia:  succeeded
Mar 12 20:26:27 HOME kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 12 20:26:27 HOME kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 12 20:26:27 HOME netfs: Mounting other filesystems:  succeeded
Mar 12 20:26:27 HOME kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 12 20:26:27 HOME kernel: CPU: L2 cache: 512K
Mar 12 20:26:23 HOME ifup:  failed; no link present.  Check cable? 
Mar 12 20:26:27 HOME apmd[764]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16)
Mar 12 20:26:27 HOME apmd: apmd startup succeeded
Mar 12 20:26:27 HOME kernel: Intel machine check architecture supported.
Mar 12 20:26:23 HOME network: Bringing up interface eth0:  failed 
Mar 12 20:26:27 HOME kernel: Intel machine check reporting enabled on CPU#0.
Mar 12 20:26:27 HOME autofs: automount startup succeeded
Mar 12 20:26:28 HOME sshd: Starting sshd:
Mar 12 20:26:28 HOME kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Mar 12 20:26:28 HOME kernel: Enabling fast FPU save and restore... done.
Mar 12 20:26:28 HOME kernel: Enabling unmasked SIMD FPU exception support... done.
Mar 12 20:26:28 HOME kernel: Checking 'hlt' instruction... OK.
Mar 12 20:26:28 HOME apmd[764]: Charge: * * * (-1% unknown)
Mar 12 20:26:28 HOME kernel: POSIX conformance testing by UNIFIX
Mar 12 20:26:29 HOME kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Mar 12 20:26:29 HOME kernel: mtrr: detected mtrr type: Intel
Mar 12 20:26:29 HOME kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1
Mar 12 20:26:29 HOME kernel: PCI: Using configuration type 1
Mar 12 20:26:29 HOME kernel: PCI: Probing PCI hardware
Mar 12 20:26:29 HOME kernel: PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Mar 12 20:26:29 HOME kernel: isapnp: Scanning for PnP cards...
Mar 12 20:26:29 HOME kernel: isapnp: No Plug & Play device found
Mar 12 20:26:29 HOME kernel: Linux NET4.0 for Linux 2.4
Mar 12 20:26:29 HOME kernel: Based upon Swansea University Computer Society NET3.039
Mar 12 20:26:29 HOME kernel: Initializing RT netlink socket
Mar 12 20:26:29 HOME kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Mar 12 20:26:29 HOME kernel: Starting kswapd
Mar 12 20:26:29 HOME kernel: VFS: Disk quotas vdquot_6.5.1
Mar 12 20:26:29 HOME sshd:  succeeded
Mar 12 20:26:30 HOME kernel: Detected PS/2 Mouse Port.
Mar 12 20:26:30 HOME sshd: 
Mar 12 20:26:30 HOME kernel: pty: 2048 Unix98 ptys configured
Mar 12 20:26:30 HOME rc: Starting sshd:  succeeded
Mar 12 20:26:30 HOME kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Mar 12 20:26:30 HOME kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Mar 12 20:26:30 HOME kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Mar 12 20:26:30 HOME kernel: Real Time Clock Driver v1.10e
Mar 12 20:26:30 HOME kernel: Floppy drive(s): fd0 is 1.44M
Mar 12 20:26:30 HOME kernel: FDC 0 is a post-1991 82077
Mar 12 20:26:30 HOME kernel: NET4: Frame Diverter 0.46
Mar 12 20:26:30 HOME kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Mar 12 20:26:31 HOME kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
Mar 12 20:26:31 HOME kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 12 20:26:31 HOME kernel: VP_IDE: IDE controller at PCI slot 00:11.1
Mar 12 20:26:31 HOME kernel: VP_IDE: chipset revision 6
Mar 12 20:26:31 HOME kernel: VP_IDE: not 100%% native mode: will probe irqs later
Mar 12 20:26:31 HOME kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
Mar 12 20:26:31 HOME kernel:     ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
Mar 12 20:26:31 HOME kernel:     ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:DMA
Mar 12 20:26:31 HOME kernel: hda: ST360020A, ATA DISK drive
Mar 12 20:26:32 HOME kernel: hdb: SONY CD-RW CRX1611, ATAPI CD/DVD-ROM drive
Mar 12 20:26:32 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
Mar 12 20:26:32 HOME kernel: hdd: ST380011A, ATA DISK drive
Mar 12 20:26:32 HOME kernel: blk: queue c03a6808, I/O limit 4095Mb (mask 0xffffffff)
Mar 12 20:26:32 HOME kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 12 20:26:32 HOME kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 12 20:26:32 HOME kernel: hda: attached ide-disk driver.
Mar 12 20:26:32 HOME kernel: hda: host protected area => 1
Mar 12 20:26:32 HOME kernel: hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
Mar 12 20:26:32 HOME kernel: hdd: attached ide-disk driver.
Mar 12 20:26:32 HOME kernel: hdd: host protected area => 1
Mar 12 20:26:32 HOME kernel: hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Mar 12 20:26:32 HOME kernel: ide-floppy driver 0.99.newide
Mar 12 20:26:32 HOME kernel: Partition check:
Mar 12 20:26:32 HOME kernel:  hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:32 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
Mar 12 20:26:32 HOME kernel: hdb: DMA disabled
Mar 12 20:26:32 HOME kernel: ide0: reset: success
Mar 12 20:26:32 HOME kernel:  hda1 hda2 hda3 hda4 < hda5 hda6 >
Mar 12 20:26:32 HOME kernel:  hdd: hdd1 hdd2 < hdd5 >
Mar 12 20:26:32 HOME kernel: ide-floppy driver 0.99.newide
Mar 12 20:26:32 HOME kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 12 20:26:32 HOME kernel: md: Autodetecting RAID arrays.
Mar 12 20:26:32 HOME kernel: md: autorun ...
Mar 12 20:26:33 HOME kernel: md: ... autorun DONE.
Mar 12 20:26:33 HOME kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 12 20:26:33 HOME kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 12 20:26:33 HOME kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Mar 12 20:26:33 HOME kernel: TCP: Hash tables configured (established 32768 bind 65536)
Mar 12 20:26:33 HOME kernel: Linux IP multicast router 0.06 plus PIM-SM
Mar 12 20:26:33 HOME kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 12 20:26:33 HOME kernel: RAMDISK: Compressed image found at block 0
Mar 12 20:26:33 HOME kernel: Freeing initrd memory: 126k freed
Mar 12 20:26:33 HOME kernel: VFS: Mounted root (ext2 filesystem).
Mar 12 20:26:33 HOME kernel: Journalled Block Device driver loaded
Mar 12 20:26:33 HOME kernel: kjournald starting.  Commit interval 5 seconds
Mar 12 20:26:33 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 12 20:26:33 HOME kernel: Freeing unused kernel memory: 128k freed
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver usbdevfs
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver hub
Mar 12 20:26:33 HOME kernel: PCI: Found IRQ 5 for device 00:10.3
Mar 12 20:26:33 HOME kernel: PCI: Sharing IRQ 5 with 00:0c.0
Mar 12 20:26:33 HOME kernel: ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
Mar 12 20:26:33 HOME kernel: ehci-hcd 00:10.3: irq 5, pci mem e0849000
Mar 12 20:26:33 HOME kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 12 20:26:33 HOME kernel: PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
Mar 12 20:26:33 HOME kernel: PCI: 00:10.3 PCI cache line size corrected to 128.
Mar 12 20:26:33 HOME kernel: ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
Mar 12 20:26:33 HOME kernel: hub.c: USB hub found
Mar 12 20:26:33 HOME kernel: hub.c: 6 ports detected
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver hiddev
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver hid
Mar 12 20:26:33 HOME kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Mar 12 20:26:33 HOME kernel: hid-core.c: USB HID support drivers
Mar 12 20:26:33 HOME kernel: mice: PS/2 mouse device common for all mice
Mar 12 20:26:33 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Mar 12 20:26:33 HOME kernel: Adding Swap: 1052248k swap-space (priority -1)
Mar 12 20:26:33 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:34 HOME xinetd: xinetd startup succeeded
Mar 12 20:26:34 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 12 20:26:34 HOME kernel: ide0: reset: success
Mar 12 20:26:34 HOME kernel: kjournald starting.  Commit interval 5 seconds
Mar 12 20:26:34 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Mar 12 20:26:34 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 12 20:26:34 HOME kernel: kjournald starting.  Commit interval 5 seconds
Mar 12 20:26:34 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Mar 12 20:26:34 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 12 20:26:35 HOME kernel: SCSI subsystem driver Revision: 1.00
Mar 12 20:26:35 HOME kernel: hdb: attached ide-scsi driver.
Mar 12 20:26:35 HOME kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Mar 12 20:26:35 HOME kernel:   Vendor: SONY      Model: CD-RW CRX1611     Rev: TYS3
Mar 12 20:26:35 HOME kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Mar 12 20:26:35 HOME kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Mar 12 20:26:36 HOME kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Mar 12 20:26:36 HOME kernel: ip_tables: (C) 2000-2002 Netfilter core team
Mar 12 20:26:36 HOME kernel: PCI: Found IRQ 11 for device 00:0a.0
Mar 12 20:26:36 HOME kernel: PCI: Sharing IRQ 11 with 00:10.1
Mar 12 20:26:36 HOME kernel: ttySHSF0 at I/O 0xc000 (irq = 11) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2002)
Mar 12 20:26:36 HOME kernel: PCI: Found IRQ 5 for device 00:0c.0
Mar 12 20:26:36 HOME kernel: PCI: Sharing IRQ 5 with 00:10.3
Mar 12 20:26:36 HOME kernel: ttySHSF1 at I/O 0xc800 (irq = 5) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2004)
Mar 12 20:26:36 HOME kernel: usb.c: registered new driver hsfusbcd2
Mar 12 20:26:36 HOME kernel: via-rhine.c:v1.10-LK1.1.17  March-1-2003  Written by Donald Becker
Mar 12 20:26:36 HOME kernel:   http://www.scyld.com/network/via-rhine.html
Mar 12 20:26:36 HOME kernel: PCI: Found IRQ 11 for device 00:12.0
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 11 with 00:0d.0
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 11 with 00:10.0
Mar 12 20:26:37 HOME kernel: eth0: VIA VT6102 Rhine-II at 0xe400, 00:50:70:c4:10:77, IRQ 11.
Mar 12 20:26:37 HOME kernel: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
Mar 12 20:26:37 HOME kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
Mar 12 20:26:37 HOME kernel:   http://www.scyld.com/network/ne2k-pci.html
Mar 12 20:26:37 HOME kernel: PCI: Found IRQ 12 for device 00:0b.0
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 12 with 00:10.2
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 12 with 00:11.5
Mar 12 20:26:38 HOME kernel: eth1: RealTek RTL-8029 found at 0xc400, IRQ 12, 52:54:AB:3E:DC:78.
Mar 12 20:26:39 HOME xinetd[816]: xinetd Version 2.3.7 started with libwrap options compiled in.
Mar 12 20:26:39 HOME xinetd[816]: Started working: 1 available service
Mar 12 20:26:40 HOME sendmail: sendmail startup succeeded
Mar 12 20:26:40 HOME sendmail: sm-client startup succeeded
Mar 12 20:26:40 HOME gpm[858]: oops() invoked from gpm.c(978)
Mar 12 20:26:40 HOME gpm[858]: /dev/mouse: No such file or directory
Mar 12 20:26:40 HOME gpm: gpm startup succeeded
Mar 12 20:26:41 HOME crond: crond startup succeeded
Mar 12 20:26:42 HOME xfs: xfs startup failed
Mar 12 20:26:42 HOME anacron: anacron startup succeeded
Mar 12 20:26:42 HOME atd: atd startup succeeded
Mar 12 20:26:42 HOME wine: Registering binary handler for Windows applications
Mar 12 20:26:42 HOME rc: Starting wine:  succeeded
Mar 12 20:26:49 HOME login(pam_unix)[916]: session opened for user root by LOGIN(uid=0)
Mar 12 20:26:49 HOME  -- root[916]: ROOT LOGIN ON tty1

^ permalink raw reply	[flat|nested] 2+ messages in thread
* Re: Sony MSAC-US70 Mouse in Redhat 8
  2005-03-12 23:10 Sony MSAC-US70 Mouse in Redhat 8 bj
@ 2005-03-13 15:49 ` Ray Olszewski
  0 siblings, 0 replies; 2+ messages in thread
From: Ray Olszewski @ 2005-03-13 15:49 UTC (permalink / raw)
  To: bhamal, linux-newbie

At 04:55 AM 3/13/2005 +0545, bj wrote:
>Hi !
>
>I am using Red Hat 8 with kernel 2.4.20-30.8.legacy.
>
>I got a new Sony  Reader/writer Optical Mouse .
>
>How do I detect it in Red Hat 8.0
>
>I did the following :-
>
>modprobe input
>modprobe hid
>modrprobe mousedev

I assume the typo here is just in the e-mail and not in what you actually did.

>These kernel modules are loaded without error .

Yes. And mousedev is the one you want ... it should object if anything it 
needs is missing.

>But still my usb mouse is not detected .
>
>Attached are my dmesg and message .


1. Please clarify what you mean by "not detected". Do you mean X does not 
find it? That gpm does not find it? Something else?

2. I notice in the dmesg putput you attached that you are loading a PS/2 
mouse driver. So I wonder if you have the appropriate /dev entries for your 
mouse (/dev/input/mouse0, maybe?), or if /dev/mouse (or whatever variant RH 
might use. such as /dev/input/mice) is symlinked to the right place. Even 
if you do, might whatever you are using as the test in (1) be looking for 
the wrong mouse device?

3. The logs you attached really have only boot/init messages in them. Did 
you do this modprobe'ing by hand after the boot/init is completed? If so, 
did you restart whatever you have that runs the mouse afterwards?  I see in 
your log where the core USB stuff is loaded, but not mousedev:

         ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver    2003-Jan-22
         hub.c: USB hub found
         hub.c: 6 ports detected
         usb.c: registered new driver hiddev
         usb.c: registered new driver hid
         hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik  <vojtech@suse.cz>
         hid-core.c: USB HID support drivers
         mice: PS/2 mouse device common for all mice

Maybe this last entr refers to mousedev; it's hard to tell from the log, 
and I don't have a similar system here to check.

4. Is your system able to access any other USB devices? If not, might you 
have the wrong core module (uhci.o or osb-uhci.o or ehci-hcd.o ) for your 
hardware. (This part is all USB-chipset specific, so consult your kernel 
documentation and your hardware documentation, or experiment ... oh, I 
found it in your logs; you are using ehci-usd, and at least it *thinks* it 
is working.)

4. If you post again, please include the output of "lsmod" and the portions 
of "lspci -v" that refer to your USB controller.


-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-03-13 15:49 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-03-12 23:10 Sony MSAC-US70 Mouse in Redhat 8 bj
2005-03-13 15:49 ` Ray Olszewski

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.