* [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards
@ 2014-04-20 11:48 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: kgene.kim, inki.dae, tomasz.figa, joshi, r.sh.open, Rahul Sharma
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Add nodes for fimd and dp controller for exynos5250 based snow
and exynos5420 based peach-pit board.
This series is based on Kukjin Kims, for-next branch.
It is dependent on
1) Andrew Bresticker's patch for hpd gpio addition, avilable at
http://www.spinics.net/lists/linux-samsung-soc/msg28827.html
2) Arun's patch for adding peach-pit board dts file at
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg28846.html.
Rahul Sharma (5):
ARM: dts: move dp hpd line to the board file for exynos5420
ARM: dts: enable fimd for exynos5250 based snow board
ARM: dts: enable dp-controller for exynos5250 based snow board
ARM: dts: enable fimd for exynos5420 based peach-pit board
ARM: dts: enable dp-controller for exynos5420 based peach-pit board
arch/arm/boot/dts/exynos5250-snow.dts | 32 +++++++++++++++++++++++
arch/arm/boot/dts/exynos5420-peach-pit.dts | 39 ++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -----
arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++
4 files changed, 78 insertions(+), 7 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards
@ 2014-04-20 11:48 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Add nodes for fimd and dp controller for exynos5250 based snow
and exynos5420 based peach-pit board.
This series is based on Kukjin Kims, for-next branch.
It is dependent on
1) Andrew Bresticker's patch for hpd gpio addition, avilable at
http://www.spinics.net/lists/linux-samsung-soc/msg28827.html
2) Arun's patch for adding peach-pit board dts file at
http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg28846.html.
Rahul Sharma (5):
ARM: dts: move dp hpd line to the board file for exynos5420
ARM: dts: enable fimd for exynos5250 based snow board
ARM: dts: enable dp-controller for exynos5250 based snow board
ARM: dts: enable fimd for exynos5420 based peach-pit board
ARM: dts: enable dp-controller for exynos5420 based peach-pit board
arch/arm/boot/dts/exynos5250-snow.dts | 32 +++++++++++++++++++++++
arch/arm/boot/dts/exynos5420-peach-pit.dts | 39 ++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -----
arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++
4 files changed, 78 insertions(+), 7 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
2014-04-20 11:48 ` Rahul Sharma
@ 2014-04-20 11:48 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: kgene.kim, inki.dae, tomasz.figa, joshi, r.sh.open, Rahul Sharma
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Display controller HPD Gpio line is board specific. This patch
is moving the pinctrl for hpd gpio line to the respective board
file.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e62c8eb..5848c42 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -59,13 +59,6 @@
interrupt-controller;
#interrupt-cells = <2>;
};
-
- dp_hpd: dp_hpd {
- samsung,pins = "gpx0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
};
pinctrl@13410000 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6910485..62d38c8 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -138,6 +138,13 @@
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
hdmi@14530000 {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
@ 2014-04-20 11:48 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Display controller HPD Gpio line is board specific. This patch
is moving the pinctrl for hpd gpio line to the respective board
file.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e62c8eb..5848c42 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -59,13 +59,6 @@
interrupt-controller;
#interrupt-cells = <2>;
};
-
- dp_hpd: dp_hpd {
- samsung,pins = "gpx0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
};
pinctrl at 13410000 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6910485..62d38c8 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -138,6 +138,13 @@
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
hdmi at 14530000 {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 2/5] ARM: dts: enable fimd for exynos5250 based snow board
2014-04-20 11:48 ` Rahul Sharma
@ 2014-04-20 11:48 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: kgene.kim, inki.dae, tomasz.figa, joshi, r.sh.open, Rahul Sharma
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable fimd node for snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5250-snow.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 586cd38..09f363d 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -344,6 +344,11 @@
};
};
+ fimd@14400000 {
+ status = "okay";
+ samsung,invert-vclk;
+ };
+
hdmi {
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 2/5] ARM: dts: enable fimd for exynos5250 based snow board
@ 2014-04-20 11:48 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable fimd node for snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5250-snow.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 586cd38..09f363d 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -344,6 +344,11 @@
};
};
+ fimd at 14400000 {
+ status = "okay";
+ samsung,invert-vclk;
+ };
+
hdmi {
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 3/5] ARM: dts: enable dp-controller for exynos5250 based snow board
2014-04-20 11:48 ` Rahul Sharma
@ 2014-04-20 11:48 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: kgene.kim, inki.dae, tomasz.figa, joshi, r.sh.open, Rahul Sharma
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Ennable dp-controller for snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5250-snow.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 09f363d..60cc2a8 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -344,6 +344,33 @@
};
};
+ dp-controller@145B0000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 0>;
+ display-timings {
+ native-mode = <&timing1>;
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
+ };
+
fimd@14400000 {
status = "okay";
samsung,invert-vclk;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 3/5] ARM: dts: enable dp-controller for exynos5250 based snow board
@ 2014-04-20 11:48 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Ennable dp-controller for snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5250-snow.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 09f363d..60cc2a8 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -344,6 +344,33 @@
};
};
+ dp-controller at 145B0000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 0>;
+ display-timings {
+ native-mode = <&timing1>;
+ timing1: timing at 1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
+ };
+
fimd at 14400000 {
status = "okay";
samsung,invert-vclk;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 4/5] ARM: dts: enable fimd for exynos5420 based peach-pit board
2014-04-20 11:48 ` Rahul Sharma
@ 2014-04-20 11:48 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: kgene.kim, inki.dae, tomasz.figa, joshi, r.sh.open, Rahul Sharma
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable fimd for peach-pit board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 5b70522..d6eaa1f 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -248,4 +248,9 @@
ddc = <&i2c_2>;
status = "okay";
};
+
+ fimd@14400000 {
+ status = "okay";
+ samsung,invert-vclk;
+ };
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 4/5] ARM: dts: enable fimd for exynos5420 based peach-pit board
@ 2014-04-20 11:48 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable fimd for peach-pit board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 5b70522..d6eaa1f 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -248,4 +248,9 @@
ddc = <&i2c_2>;
status = "okay";
};
+
+ fimd at 14400000 {
+ status = "okay";
+ samsung,invert-vclk;
+ };
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 5/5] ARM: dts: enable dp-controller for exynos5420 based peach-pit board
2014-04-20 11:48 ` Rahul Sharma
@ 2014-04-20 11:48 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: kgene.kim, inki.dae, tomasz.figa, joshi, r.sh.open, Rahul Sharma
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable dp-controller for peach-pit board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index d6eaa1f..e6199e1 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -61,6 +61,13 @@
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
};
pinctrl@14010000 {
@@ -249,6 +256,33 @@
status = "okay";
};
+ dp-controller@145B0000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x06>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx2 6 0>;
+ display-timings {
+ native-mode = <&timing1>;
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
+ };
+
fimd@14400000 {
status = "okay";
samsung,invert-vclk;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 5/5] ARM: dts: enable dp-controller for exynos5420 based peach-pit board
@ 2014-04-20 11:48 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-04-20 11:48 UTC (permalink / raw)
To: linux-arm-kernel
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable dp-controller for peach-pit board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index d6eaa1f..e6199e1 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -61,6 +61,13 @@
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
};
pinctrl at 14010000 {
@@ -249,6 +256,33 @@
status = "okay";
};
+ dp-controller at 145B0000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x06>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx2 6 0>;
+ display-timings {
+ native-mode = <&timing1>;
+ timing1: timing at 1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
+ };
+
fimd at 14400000 {
status = "okay";
samsung,invert-vclk;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards
2014-04-20 11:48 ` Rahul Sharma
@ 2014-04-25 9:45 ` Arun Kumar K
-1 siblings, 0 replies; 28+ messages in thread
From: Arun Kumar K @ 2014-04-25 9:45 UTC (permalink / raw)
To: Rahul Sharma
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, linux-samsung-soc, Kukjin Kim,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ, Tomasz Figa, sunil joshi,
Rahul Sharma
Hi,
Tested this whole series on peach-pit board.
Tested-by : Arun Kumar K <arun.kk-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
On Sun, Apr 20, 2014 at 5:18 PM, Rahul Sharma <rahul.sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
> From: Rahul Sharma <Rahul.Sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>
> Add nodes for fimd and dp controller for exynos5250 based snow
> and exynos5420 based peach-pit board.
>
> This series is based on Kukjin Kims, for-next branch.
>
> It is dependent on
> 1) Andrew Bresticker's patch for hpd gpio addition, avilable at
> http://www.spinics.net/lists/linux-samsung-soc/msg28827.html
> 2) Arun's patch for adding peach-pit board dts file at
> http://www.mail-archive.com/linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg28846.html.
>
> Rahul Sharma (5):
> ARM: dts: move dp hpd line to the board file for exynos5420
> ARM: dts: enable fimd for exynos5250 based snow board
> ARM: dts: enable dp-controller for exynos5250 based snow board
> ARM: dts: enable fimd for exynos5420 based peach-pit board
> ARM: dts: enable dp-controller for exynos5420 based peach-pit board
>
> arch/arm/boot/dts/exynos5250-snow.dts | 32 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 39 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -----
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++
> 4 files changed, 78 insertions(+), 7 deletions(-)
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards
@ 2014-04-25 9:45 ` Arun Kumar K
0 siblings, 0 replies; 28+ messages in thread
From: Arun Kumar K @ 2014-04-25 9:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Tested this whole series on peach-pit board.
Tested-by : Arun Kumar K <arun.kk@samsung.com>
On Sun, Apr 20, 2014 at 5:18 PM, Rahul Sharma <rahul.sharma@samsung.com> wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Add nodes for fimd and dp controller for exynos5250 based snow
> and exynos5420 based peach-pit board.
>
> This series is based on Kukjin Kims, for-next branch.
>
> It is dependent on
> 1) Andrew Bresticker's patch for hpd gpio addition, avilable at
> http://www.spinics.net/lists/linux-samsung-soc/msg28827.html
> 2) Arun's patch for adding peach-pit board dts file at
> http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg28846.html.
>
> Rahul Sharma (5):
> ARM: dts: move dp hpd line to the board file for exynos5420
> ARM: dts: enable fimd for exynos5250 based snow board
> ARM: dts: enable dp-controller for exynos5250 based snow board
> ARM: dts: enable fimd for exynos5420 based peach-pit board
> ARM: dts: enable dp-controller for exynos5420 based peach-pit board
>
> arch/arm/boot/dts/exynos5250-snow.dts | 32 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 39 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -----
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++
> 4 files changed, 78 insertions(+), 7 deletions(-)
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/5] ARM: dts: enable dp-controller for exynos5250 based snow board
2014-04-20 11:48 ` Rahul Sharma
@ 2014-05-07 13:36 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-07 13:36 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: Kukjin Kim, Inki Dae, Tomasz Figa, sunil joshi, Rahul Sharma,
Rahul Sharma, Jingoo Han
Hi Kukjin,
The only dependency for this patch is new property "samsung,hpd-gpio" which
is acked by Jingoo Han, Maintainer, exynos DP at
http://oascentral.opensubscriber.com/message/dri-devel@lists.freedesktop.org/17150750.html.
All remaining properties are as per existing DT bindings.
@Jingoo, I want to request you to review the dp-controller nodes for
exynos5420 and 5250.
Please consider it for merge.
Regards,
Rahul Sharma.
On 20 April 2014 17:18, Rahul Sharma <rahul.sharma@samsung.com> wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Ennable dp-controller for snow board.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250-snow.dts | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> index 09f363d..60cc2a8 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -344,6 +344,33 @@
> };
> };
>
> + dp-controller@145B0000 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x0a>;
> + samsung,lane-count = <2>;
> + samsung,hpd-gpio = <&gpx0 7 0>;
> + display-timings {
> + native-mode = <&timing1>;
> + timing1: timing@1 {
> + clock-frequency = <70589280>;
> + hactive = <1366>;
> + vactive = <768>;
> + hfront-porch = <40>;
> + hback-porch = <40>;
> + hsync-len = <32>;
> + vback-porch = <10>;
> + vfront-porch = <12>;
> + vsync-len = <6>;
> + };
> + };
> + };
> +
> fimd@14400000 {
> status = "okay";
> samsung,invert-vclk;
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 3/5] ARM: dts: enable dp-controller for exynos5250 based snow board
@ 2014-05-07 13:36 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-07 13:36 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kukjin,
The only dependency for this patch is new property "samsung,hpd-gpio" which
is acked by Jingoo Han, Maintainer, exynos DP at
http://oascentral.opensubscriber.com/message/dri-devel at lists.freedesktop.org/17150750.html.
All remaining properties are as per existing DT bindings.
@Jingoo, I want to request you to review the dp-controller nodes for
exynos5420 and 5250.
Please consider it for merge.
Regards,
Rahul Sharma.
On 20 April 2014 17:18, Rahul Sharma <rahul.sharma@samsung.com> wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Ennable dp-controller for snow board.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250-snow.dts | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> index 09f363d..60cc2a8 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -344,6 +344,33 @@
> };
> };
>
> + dp-controller at 145B0000 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x0a>;
> + samsung,lane-count = <2>;
> + samsung,hpd-gpio = <&gpx0 7 0>;
> + display-timings {
> + native-mode = <&timing1>;
> + timing1: timing at 1 {
> + clock-frequency = <70589280>;
> + hactive = <1366>;
> + vactive = <768>;
> + hfront-porch = <40>;
> + hback-porch = <40>;
> + hsync-len = <32>;
> + vback-porch = <10>;
> + vfront-porch = <12>;
> + vsync-len = <6>;
> + };
> + };
> + };
> +
> fimd at 14400000 {
> status = "okay";
> samsung,invert-vclk;
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 5/5] ARM: dts: enable dp-controller for exynos5420 based peach-pit board
2014-04-20 11:48 ` Rahul Sharma
@ 2014-05-07 13:41 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-07 13:41 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-samsung-soc
Cc: Kukjin Kim, Inki Dae, Tomasz Figa, sunil joshi, Rahul Sharma,
Rahul Sharma, Jingoo Han
Hi Kukjin,
I have same update for this patch. The new DT property is Acked at
http://oascentral.opensubscriber.com/message/dri-devel@lists.freedesktop.org/17150750.html
Please consider it for merge.
Regards,
Rahul Sharma.
On 20 April 2014 17:18, Rahul Sharma <rahul.sharma@samsung.com> wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Enable dp-controller for peach-pit board.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index d6eaa1f..e6199e1 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -61,6 +61,13 @@
> samsung,pin-pud = <1>;
> samsung,pin-drv = <0>;
> };
> +
> + dp_hpd: dp_hpd {
> + samsung,pins = "gpx2-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> };
>
> pinctrl@14010000 {
> @@ -249,6 +256,33 @@
> status = "okay";
> };
>
> + dp-controller@145B0000 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x06>;
> + samsung,lane-count = <2>;
> + samsung,hpd-gpio = <&gpx2 6 0>;
> + display-timings {
> + native-mode = <&timing1>;
> + timing1: timing@1 {
> + clock-frequency = <70589280>;
> + hactive = <1366>;
> + vactive = <768>;
> + hfront-porch = <40>;
> + hback-porch = <40>;
> + hsync-len = <32>;
> + vback-porch = <10>;
> + vfront-porch = <12>;
> + vsync-len = <6>;
> + };
> + };
> + };
> +
> fimd@14400000 {
> status = "okay";
> samsung,invert-vclk;
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 5/5] ARM: dts: enable dp-controller for exynos5420 based peach-pit board
@ 2014-05-07 13:41 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-07 13:41 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kukjin,
I have same update for this patch. The new DT property is Acked at
http://oascentral.opensubscriber.com/message/dri-devel at lists.freedesktop.org/17150750.html
Please consider it for merge.
Regards,
Rahul Sharma.
On 20 April 2014 17:18, Rahul Sharma <rahul.sharma@samsung.com> wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Enable dp-controller for peach-pit board.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index d6eaa1f..e6199e1 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -61,6 +61,13 @@
> samsung,pin-pud = <1>;
> samsung,pin-drv = <0>;
> };
> +
> + dp_hpd: dp_hpd {
> + samsung,pins = "gpx2-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> };
>
> pinctrl at 14010000 {
> @@ -249,6 +256,33 @@
> status = "okay";
> };
>
> + dp-controller at 145B0000 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x06>;
> + samsung,lane-count = <2>;
> + samsung,hpd-gpio = <&gpx2 6 0>;
> + display-timings {
> + native-mode = <&timing1>;
> + timing1: timing at 1 {
> + clock-frequency = <70589280>;
> + hactive = <1366>;
> + vactive = <768>;
> + hfront-porch = <40>;
> + hback-porch = <40>;
> + hsync-len = <32>;
> + vback-porch = <10>;
> + vfront-porch = <12>;
> + vsync-len = <6>;
> + };
> + };
> + };
> +
> fimd at 14400000 {
> status = "okay";
> samsung,invert-vclk;
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards
2014-04-20 11:48 ` Rahul Sharma
@ 2014-05-08 5:39 ` Jingoo Han
-1 siblings, 0 replies; 28+ messages in thread
From: Jingoo Han @ 2014-05-08 5:39 UTC (permalink / raw)
To: 'Rahul Sharma'
Cc: linux-arm-kernel, devicetree, linux-samsung-soc, kgene.kim,
inki.dae, tomasz.figa, joshi, r.sh.open, 'Jingoo Han'
On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Add nodes for fimd and dp controller for exynos5250 based snow
> and exynos5420 based peach-pit board.
>
> This series is based on Kukjin Kims, for-next branch.
>
> It is dependent on
> 1) Andrew Bresticker's patch for hpd gpio addition, avilable at
> http://www.spinics.net/lists/linux-samsung-soc/msg28827.html
> 2) Arun's patch for adding peach-pit board dts file at
> http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg28846.html.
One more thing. These patches were based against the following patches.
3) Rahul Sharma's patch for hdmi support for exynos5 based dt files.
([PATCH 0/7] ARM: dts: enable hdmi for exynos5 based peach and snow boards)
http://www.spinics.net/lists/linux-samsung-soc/msg29011.html
Please check the dependency.
Anyone does not want to waste the time, due to patch breakage.
Best regards,
Jingoo Han
>
> Rahul Sharma (5):
> ARM: dts: move dp hpd line to the board file for exynos5420
> ARM: dts: enable fimd for exynos5250 based snow board
> ARM: dts: enable dp-controller for exynos5250 based snow board
> ARM: dts: enable fimd for exynos5420 based peach-pit board
> ARM: dts: enable dp-controller for exynos5420 based peach-pit board
>
> arch/arm/boot/dts/exynos5250-snow.dts | 32 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 39 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -----
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++
> 4 files changed, 78 insertions(+), 7 deletions(-)
>
> --
> 1.7.9.5
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards
@ 2014-05-08 5:39 ` Jingoo Han
0 siblings, 0 replies; 28+ messages in thread
From: Jingoo Han @ 2014-05-08 5:39 UTC (permalink / raw)
To: linux-arm-kernel
On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Add nodes for fimd and dp controller for exynos5250 based snow
> and exynos5420 based peach-pit board.
>
> This series is based on Kukjin Kims, for-next branch.
>
> It is dependent on
> 1) Andrew Bresticker's patch for hpd gpio addition, avilable at
> http://www.spinics.net/lists/linux-samsung-soc/msg28827.html
> 2) Arun's patch for adding peach-pit board dts file at
> http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg28846.html.
One more thing. These patches were based against the following patches.
3) Rahul Sharma's patch for hdmi support for exynos5 based dt files.
([PATCH 0/7] ARM: dts: enable hdmi for exynos5 based peach and snow boards)
http://www.spinics.net/lists/linux-samsung-soc/msg29011.html
Please check the dependency.
Anyone does not want to waste the time, due to patch breakage.
Best regards,
Jingoo Han
>
> Rahul Sharma (5):
> ARM: dts: move dp hpd line to the board file for exynos5420
> ARM: dts: enable fimd for exynos5250 based snow board
> ARM: dts: enable dp-controller for exynos5250 based snow board
> ARM: dts: enable fimd for exynos5420 based peach-pit board
> ARM: dts: enable dp-controller for exynos5420 based peach-pit board
>
> arch/arm/boot/dts/exynos5250-snow.dts | 32 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 39 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -----
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++
> 4 files changed, 78 insertions(+), 7 deletions(-)
>
> --
> 1.7.9.5
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
2014-04-20 11:48 ` Rahul Sharma
@ 2014-05-08 6:32 ` Jingoo Han
-1 siblings, 0 replies; 28+ messages in thread
From: Jingoo Han @ 2014-05-08 6:32 UTC (permalink / raw)
To: 'Rahul Sharma'
Cc: linux-arm-kernel, devicetree, linux-samsung-soc, kgene.kim,
inki.dae, tomasz.figa, joshi, r.sh.open, 'Doug Anderson',
'Tomasz Figa', 'Jingoo Han'
On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Display controller HPD Gpio line is board specific. This patch
> is moving the pinctrl for hpd gpio line to the respective board
> file.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
> 2 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index e62c8eb..5848c42 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -59,13 +59,6 @@
> interrupt-controller;
> #interrupt-cells = <2>;
> };
> -
> - dp_hpd: dp_hpd {
> - samsung,pins = "gpx0-7";
> - samsung,pin-function = <3>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> };
(+cc Doug Anderson, Tomasz Figa)
'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
So, there should be "gpx0-7" part on chip specific dts file such as
'exynos5420-pinctrl.dtsi'.
However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
This is board specific. In my opinion, the following would look
better. In this way, this patch is not necessary.
1. case: Standard HPD pin is used. (smdk5420)
arch/arm/boot/dts/exynos5420-pinctrl.dts
pinctrl@13400000 {
dp_hpd: dp_hpd {
samsung,pins = "gpx0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
arch/arm/boot/dts/exynos5420-smdk5420.dts
dp-controller@145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
...
2. case: non-standard HPD pin such as GPIO is used. (peach pit)
arch/arm/boot/dts/exynos5420-peach-pit.dts
pinctrl@13400000 {
dp_hpd: dp_hpd {
samsung,pins = "gpx2-6";
samsung,pin-function = <0>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
dp-controller@145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
...
samsung,hpd-gpio = <&gpx2 6 0>;
Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
respectively.
A year ago, Doug Anderson and me agreed that standard HPD pin
part should be included to 'exynos5250-pinctrl.dtsi'.
(https://lkml.org/lkml/2013/5/11/134)
Best regards,
Jingoo Han
>
> pinctrl@13410000 {
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index 6910485..62d38c8 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -138,6 +138,13 @@
> samsung,pin-pud = <1>;
> samsung,pin-drv = <0>;
> };
> +
> + dp_hpd: dp_hpd {
> + samsung,pins = "gpx0-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> };
>
> hdmi@14530000 {
> --
> 1.7.9.5
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
@ 2014-05-08 6:32 ` Jingoo Han
0 siblings, 0 replies; 28+ messages in thread
From: Jingoo Han @ 2014-05-08 6:32 UTC (permalink / raw)
To: linux-arm-kernel
On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Display controller HPD Gpio line is board specific. This patch
> is moving the pinctrl for hpd gpio line to the respective board
> file.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
> 2 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index e62c8eb..5848c42 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -59,13 +59,6 @@
> interrupt-controller;
> #interrupt-cells = <2>;
> };
> -
> - dp_hpd: dp_hpd {
> - samsung,pins = "gpx0-7";
> - samsung,pin-function = <3>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> };
(+cc Doug Anderson, Tomasz Figa)
'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
So, there should be "gpx0-7" part on chip specific dts file such as
'exynos5420-pinctrl.dtsi'.
However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
This is board specific. In my opinion, the following would look
better. In this way, this patch is not necessary.
1. case: Standard HPD pin is used. (smdk5420)
arch/arm/boot/dts/exynos5420-pinctrl.dts
pinctrl at 13400000 {
dp_hpd: dp_hpd {
samsung,pins = "gpx0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
arch/arm/boot/dts/exynos5420-smdk5420.dts
dp-controller at 145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
...
2. case: non-standard HPD pin such as GPIO is used. (peach pit)
arch/arm/boot/dts/exynos5420-peach-pit.dts
pinctrl at 13400000 {
dp_hpd: dp_hpd {
samsung,pins = "gpx2-6";
samsung,pin-function = <0>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
dp-controller at 145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
...
samsung,hpd-gpio = <&gpx2 6 0>;
Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
respectively.
A year ago, Doug Anderson and me agreed that standard HPD pin
part should be included to 'exynos5250-pinctrl.dtsi'.
(https://lkml.org/lkml/2013/5/11/134)
Best regards,
Jingoo Han
>
> pinctrl at 13410000 {
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index 6910485..62d38c8 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -138,6 +138,13 @@
> samsung,pin-pud = <1>;
> samsung,pin-drv = <0>;
> };
> +
> + dp_hpd: dp_hpd {
> + samsung,pins = "gpx0-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> };
>
> hdmi at 14530000 {
> --
> 1.7.9.5
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
2014-05-08 6:32 ` Jingoo Han
@ 2014-05-08 9:08 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-08 9:08 UTC (permalink / raw)
To: Jingoo Han
Cc: linux-arm-kernel, devicetree, linux-samsung-soc, Kukjin Kim,
Inki Dae, Tomasz Figa, sunil joshi, Doug Anderson, Tomasz Figa
Thanks Jingoo,
On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote:
> On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>>
>> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>>
>> Display controller HPD Gpio line is board specific. This patch
>> is moving the pinctrl for hpd gpio line to the respective board
>> file.
>>
>> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
>> 2 files changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> index e62c8eb..5848c42 100644
>> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> @@ -59,13 +59,6 @@
>> interrupt-controller;
>> #interrupt-cells = <2>;
>> };
>> -
>> - dp_hpd: dp_hpd {
>> - samsung,pins = "gpx0-7";
>> - samsung,pin-function = <3>;
>> - samsung,pin-pud = <0>;
>> - samsung,pin-drv = <0>;
>> - };
>> };
>
> (+cc Doug Anderson, Tomasz Figa)
>
> 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
> So, there should be "gpx0-7" part on chip specific dts file such as
> 'exynos5420-pinctrl.dtsi'.
>
> However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
> This is board specific. In my opinion, the following would look
> better. In this way, this patch is not necessary.
>
> 1. case: Standard HPD pin is used. (smdk5420)
> arch/arm/boot/dts/exynos5420-pinctrl.dts
> pinctrl@13400000 {
> dp_hpd: dp_hpd {
> samsung,pins = "gpx0-7";
> samsung,pin-function = <3>;
> samsung,pin-pud = <0>;
> samsung,pin-drv = <0>;
> };
> arch/arm/boot/dts/exynos5420-smdk5420.dts
> dp-controller@145B0000 {
> pinctrl-names = "default";
> pinctrl-0 = <&dp_hpd>;
> ...
>
>
> 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
> arch/arm/boot/dts/exynos5420-peach-pit.dts
> pinctrl@13400000 {
> dp_hpd: dp_hpd {
> samsung,pins = "gpx2-6";
> samsung,pin-function = <0>;
> samsung,pin-pud = <3>;
> samsung,pin-drv = <0>;
> };
> dp-controller@145B0000 {
> pinctrl-names = "default";
> pinctrl-0 = <&dp_hpd>;
> ...
> samsung,hpd-gpio = <&gpx2 6 0>;
>
> Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
> 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
> respectively.
>
> A year ago, Doug Anderson and me agreed that standard HPD pin
> part should be included to 'exynos5250-pinctrl.dtsi'.
> (https://lkml.org/lkml/2013/5/11/134)
>
I wasn't aware of this discussion. It make sense. I will drop this patch.
I need to choose some other name for this pin, say "peach_dp_hpd".
Let me know if any concern.
Regards,
Rahul Sharma.
> Best regards,
> Jingoo Han
>
>>
>> pinctrl@13410000 {
>> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> index 6910485..62d38c8 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -138,6 +138,13 @@
>> samsung,pin-pud = <1>;
>> samsung,pin-drv = <0>;
>> };
>> +
>> + dp_hpd: dp_hpd {
>> + samsung,pins = "gpx0-7";
>> + samsung,pin-function = <3>;
>> + samsung,pin-pud = <0>;
>> + samsung,pin-drv = <0>;
>> + };
>> };
>>
>> hdmi@14530000 {
>> --
>> 1.7.9.5
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
@ 2014-05-08 9:08 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-08 9:08 UTC (permalink / raw)
To: linux-arm-kernel
Thanks Jingoo,
On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote:
> On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>>
>> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>>
>> Display controller HPD Gpio line is board specific. This patch
>> is moving the pinctrl for hpd gpio line to the respective board
>> file.
>>
>> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
>> 2 files changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> index e62c8eb..5848c42 100644
>> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> @@ -59,13 +59,6 @@
>> interrupt-controller;
>> #interrupt-cells = <2>;
>> };
>> -
>> - dp_hpd: dp_hpd {
>> - samsung,pins = "gpx0-7";
>> - samsung,pin-function = <3>;
>> - samsung,pin-pud = <0>;
>> - samsung,pin-drv = <0>;
>> - };
>> };
>
> (+cc Doug Anderson, Tomasz Figa)
>
> 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
> So, there should be "gpx0-7" part on chip specific dts file such as
> 'exynos5420-pinctrl.dtsi'.
>
> However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
> This is board specific. In my opinion, the following would look
> better. In this way, this patch is not necessary.
>
> 1. case: Standard HPD pin is used. (smdk5420)
> arch/arm/boot/dts/exynos5420-pinctrl.dts
> pinctrl at 13400000 {
> dp_hpd: dp_hpd {
> samsung,pins = "gpx0-7";
> samsung,pin-function = <3>;
> samsung,pin-pud = <0>;
> samsung,pin-drv = <0>;
> };
> arch/arm/boot/dts/exynos5420-smdk5420.dts
> dp-controller at 145B0000 {
> pinctrl-names = "default";
> pinctrl-0 = <&dp_hpd>;
> ...
>
>
> 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
> arch/arm/boot/dts/exynos5420-peach-pit.dts
> pinctrl at 13400000 {
> dp_hpd: dp_hpd {
> samsung,pins = "gpx2-6";
> samsung,pin-function = <0>;
> samsung,pin-pud = <3>;
> samsung,pin-drv = <0>;
> };
> dp-controller at 145B0000 {
> pinctrl-names = "default";
> pinctrl-0 = <&dp_hpd>;
> ...
> samsung,hpd-gpio = <&gpx2 6 0>;
>
> Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
> 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
> respectively.
>
> A year ago, Doug Anderson and me agreed that standard HPD pin
> part should be included to 'exynos5250-pinctrl.dtsi'.
> (https://lkml.org/lkml/2013/5/11/134)
>
I wasn't aware of this discussion. It make sense. I will drop this patch.
I need to choose some other name for this pin, say "peach_dp_hpd".
Let me know if any concern.
Regards,
Rahul Sharma.
> Best regards,
> Jingoo Han
>
>>
>> pinctrl at 13410000 {
>> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> index 6910485..62d38c8 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -138,6 +138,13 @@
>> samsung,pin-pud = <1>;
>> samsung,pin-drv = <0>;
>> };
>> +
>> + dp_hpd: dp_hpd {
>> + samsung,pins = "gpx0-7";
>> + samsung,pin-function = <3>;
>> + samsung,pin-pud = <0>;
>> + samsung,pin-drv = <0>;
>> + };
>> };
>>
>> hdmi at 14530000 {
>> --
>> 1.7.9.5
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
2014-05-08 9:08 ` Rahul Sharma
@ 2014-05-09 0:45 ` Jingoo Han
-1 siblings, 0 replies; 28+ messages in thread
From: Jingoo Han @ 2014-05-09 0:45 UTC (permalink / raw)
To: 'Rahul Sharma'
Cc: linux-arm-kernel, devicetree, 'linux-samsung-soc',
'Kukjin Kim', 'Inki Dae', 'Tomasz Figa',
'sunil joshi', 'Doug Anderson',
'Tomasz Figa', 'Jingoo Han'
On Thursday, May 08, 2014 6:08 PM, Rahul Sharma wrote:
> On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote:
> > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
> >>
> >> From: Rahul Sharma <Rahul.Sharma@samsung.com>
> >>
> >> Display controller HPD Gpio line is board specific. This patch
> >> is moving the pinctrl for hpd gpio line to the respective board
> >> file.
> >>
> >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> >> ---
> >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
> >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
> >> 2 files changed, 7 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> index e62c8eb..5848c42 100644
> >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> @@ -59,13 +59,6 @@
> >> interrupt-controller;
> >> #interrupt-cells = <2>;
> >> };
> >> -
> >> - dp_hpd: dp_hpd {
> >> - samsung,pins = "gpx0-7";
> >> - samsung,pin-function = <3>;
> >> - samsung,pin-pud = <0>;
> >> - samsung,pin-drv = <0>;
> >> - };
> >> };
> >
> > (+cc Doug Anderson, Tomasz Figa)
> >
> > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
> > So, there should be "gpx0-7" part on chip specific dts file such as
> > 'exynos5420-pinctrl.dtsi'.
> >
> > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
> > This is board specific. In my opinion, the following would look
> > better. In this way, this patch is not necessary.
> >
> > 1. case: Standard HPD pin is used. (smdk5420)
> > arch/arm/boot/dts/exynos5420-pinctrl.dts
> > pinctrl@13400000 {
> > dp_hpd: dp_hpd {
> > samsung,pins = "gpx0-7";
> > samsung,pin-function = <3>;
> > samsung,pin-pud = <0>;
> > samsung,pin-drv = <0>;
> > };
> > arch/arm/boot/dts/exynos5420-smdk5420.dts
> > dp-controller@145B0000 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&dp_hpd>;
> > ...
> >
> >
> > 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
> > arch/arm/boot/dts/exynos5420-peach-pit.dts
> > pinctrl@13400000 {
> > dp_hpd: dp_hpd {
> > samsung,pins = "gpx2-6";
> > samsung,pin-function = <0>;
> > samsung,pin-pud = <3>;
> > samsung,pin-drv = <0>;
> > };
> > dp-controller@145B0000 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&dp_hpd>;
> > ...
> > samsung,hpd-gpio = <&gpx2 6 0>;
> >
> > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
> > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
> > respectively.
> >
> > A year ago, Doug Anderson and me agreed that standard HPD pin
> > part should be included to 'exynos5250-pinctrl.dtsi'.
> > (https://lkml.org/lkml/2013/5/11/134)
> >
>
> I wasn't aware of this discussion. It make sense. I will drop this patch.
> I need to choose some other name for this pin, say "peach_dp_hpd".
> Let me know if any concern.
In my opinion, "dp_hpd_gpio" looks better as below.
arch/arm/boot/dts/exynos5420-peach-pit.dts
pinctrl@13400000 {
dp_hpd_gpio: dp_hpd_gpio {
samsung,pins = "gpx2-6";
samsung,pin-function = <0>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
dp-controller@145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd_gpio>;
...
samsung,hpd-gpio = <&gpx2 6 0>;
Best regards,
Jingoo Han
>
> Regards,
> Rahul Sharma.
>
> > Best regards,
> > Jingoo Han
> >
> >>
> >> pinctrl@13410000 {
> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> index 6910485..62d38c8 100644
> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> @@ -138,6 +138,13 @@
> >> samsung,pin-pud = <1>;
> >> samsung,pin-drv = <0>;
> >> };
> >> +
> >> + dp_hpd: dp_hpd {
> >> + samsung,pins = "gpx0-7";
> >> + samsung,pin-function = <3>;
> >> + samsung,pin-pud = <0>;
> >> + samsung,pin-drv = <0>;
> >> + };
> >> };
> >>
> >> hdmi@14530000 {
> >> --
> >> 1.7.9.5
> >
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
@ 2014-05-09 0:45 ` Jingoo Han
0 siblings, 0 replies; 28+ messages in thread
From: Jingoo Han @ 2014-05-09 0:45 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday, May 08, 2014 6:08 PM, Rahul Sharma wrote:
> On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote:
> > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
> >>
> >> From: Rahul Sharma <Rahul.Sharma@samsung.com>
> >>
> >> Display controller HPD Gpio line is board specific. This patch
> >> is moving the pinctrl for hpd gpio line to the respective board
> >> file.
> >>
> >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> >> ---
> >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
> >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
> >> 2 files changed, 7 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> index e62c8eb..5848c42 100644
> >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> >> @@ -59,13 +59,6 @@
> >> interrupt-controller;
> >> #interrupt-cells = <2>;
> >> };
> >> -
> >> - dp_hpd: dp_hpd {
> >> - samsung,pins = "gpx0-7";
> >> - samsung,pin-function = <3>;
> >> - samsung,pin-pud = <0>;
> >> - samsung,pin-drv = <0>;
> >> - };
> >> };
> >
> > (+cc Doug Anderson, Tomasz Figa)
> >
> > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
> > So, there should be "gpx0-7" part on chip specific dts file such as
> > 'exynos5420-pinctrl.dtsi'.
> >
> > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
> > This is board specific. In my opinion, the following would look
> > better. In this way, this patch is not necessary.
> >
> > 1. case: Standard HPD pin is used. (smdk5420)
> > arch/arm/boot/dts/exynos5420-pinctrl.dts
> > pinctrl at 13400000 {
> > dp_hpd: dp_hpd {
> > samsung,pins = "gpx0-7";
> > samsung,pin-function = <3>;
> > samsung,pin-pud = <0>;
> > samsung,pin-drv = <0>;
> > };
> > arch/arm/boot/dts/exynos5420-smdk5420.dts
> > dp-controller at 145B0000 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&dp_hpd>;
> > ...
> >
> >
> > 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
> > arch/arm/boot/dts/exynos5420-peach-pit.dts
> > pinctrl at 13400000 {
> > dp_hpd: dp_hpd {
> > samsung,pins = "gpx2-6";
> > samsung,pin-function = <0>;
> > samsung,pin-pud = <3>;
> > samsung,pin-drv = <0>;
> > };
> > dp-controller at 145B0000 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&dp_hpd>;
> > ...
> > samsung,hpd-gpio = <&gpx2 6 0>;
> >
> > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
> > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
> > respectively.
> >
> > A year ago, Doug Anderson and me agreed that standard HPD pin
> > part should be included to 'exynos5250-pinctrl.dtsi'.
> > (https://lkml.org/lkml/2013/5/11/134)
> >
>
> I wasn't aware of this discussion. It make sense. I will drop this patch.
> I need to choose some other name for this pin, say "peach_dp_hpd".
> Let me know if any concern.
In my opinion, "dp_hpd_gpio" looks better as below.
arch/arm/boot/dts/exynos5420-peach-pit.dts
pinctrl at 13400000 {
dp_hpd_gpio: dp_hpd_gpio {
samsung,pins = "gpx2-6";
samsung,pin-function = <0>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
dp-controller at 145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd_gpio>;
...
samsung,hpd-gpio = <&gpx2 6 0>;
Best regards,
Jingoo Han
>
> Regards,
> Rahul Sharma.
>
> > Best regards,
> > Jingoo Han
> >
> >>
> >> pinctrl at 13410000 {
> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> index 6910485..62d38c8 100644
> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> >> @@ -138,6 +138,13 @@
> >> samsung,pin-pud = <1>;
> >> samsung,pin-drv = <0>;
> >> };
> >> +
> >> + dp_hpd: dp_hpd {
> >> + samsung,pins = "gpx0-7";
> >> + samsung,pin-function = <3>;
> >> + samsung,pin-pud = <0>;
> >> + samsung,pin-drv = <0>;
> >> + };
> >> };
> >>
> >> hdmi at 14530000 {
> >> --
> >> 1.7.9.5
> >
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
2014-05-09 0:45 ` Jingoo Han
@ 2014-05-09 1:17 ` Rahul Sharma
-1 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-09 1:17 UTC (permalink / raw)
To: Jingoo Han
Cc: Doug Anderson, devicetree, linux-samsung-soc, Tomasz Figa,
Tomasz Figa, sunil joshi, Inki Dae, Kukjin Kim, linux-arm-kernel
On 9 May 2014 06:15, Jingoo Han <jg1.han@samsung.com> wrote:
> On Thursday, May 08, 2014 6:08 PM, Rahul Sharma wrote:
>> On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote:
>> > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>> >>
>> >> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>> >>
>> >> Display controller HPD Gpio line is board specific. This patch
>> >> is moving the pinctrl for hpd gpio line to the respective board
>> >> file.
>> >>
>> >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
>> >> ---
>> >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
>> >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
>> >> 2 files changed, 7 insertions(+), 7 deletions(-)
>> >>
>> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> index e62c8eb..5848c42 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> @@ -59,13 +59,6 @@
>> >> interrupt-controller;
>> >> #interrupt-cells = <2>;
>> >> };
>> >> -
>> >> - dp_hpd: dp_hpd {
>> >> - samsung,pins = "gpx0-7";
>> >> - samsung,pin-function = <3>;
>> >> - samsung,pin-pud = <0>;
>> >> - samsung,pin-drv = <0>;
>> >> - };
>> >> };
>> >
>> > (+cc Doug Anderson, Tomasz Figa)
>> >
>> > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
>> > So, there should be "gpx0-7" part on chip specific dts file such as
>> > 'exynos5420-pinctrl.dtsi'.
>> >
>> > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
>> > This is board specific. In my opinion, the following would look
>> > better. In this way, this patch is not necessary.
>> >
>> > 1. case: Standard HPD pin is used. (smdk5420)
>> > arch/arm/boot/dts/exynos5420-pinctrl.dts
>> > pinctrl@13400000 {
>> > dp_hpd: dp_hpd {
>> > samsung,pins = "gpx0-7";
>> > samsung,pin-function = <3>;
>> > samsung,pin-pud = <0>;
>> > samsung,pin-drv = <0>;
>> > };
>> > arch/arm/boot/dts/exynos5420-smdk5420.dts
>> > dp-controller@145B0000 {
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&dp_hpd>;
>> > ...
>> >
>> >
>> > 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
>> > arch/arm/boot/dts/exynos5420-peach-pit.dts
>> > pinctrl@13400000 {
>> > dp_hpd: dp_hpd {
>> > samsung,pins = "gpx2-6";
>> > samsung,pin-function = <0>;
>> > samsung,pin-pud = <3>;
>> > samsung,pin-drv = <0>;
>> > };
>> > dp-controller@145B0000 {
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&dp_hpd>;
>> > ...
>> > samsung,hpd-gpio = <&gpx2 6 0>;
>> >
>> > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
>> > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
>> > respectively.
>> >
>> > A year ago, Doug Anderson and me agreed that standard HPD pin
>> > part should be included to 'exynos5250-pinctrl.dtsi'.
>> > (https://lkml.org/lkml/2013/5/11/134)
>> >
>>
>> I wasn't aware of this discussion. It make sense. I will drop this patch.
>> I need to choose some other name for this pin, say "peach_dp_hpd".
>> Let me know if any concern.
>
> In my opinion, "dp_hpd_gpio" looks better as below.
>
> arch/arm/boot/dts/exynos5420-peach-pit.dts
> pinctrl@13400000 {
> dp_hpd_gpio: dp_hpd_gpio {
> samsung,pins = "gpx2-6";
> samsung,pin-function = <0>;
> samsung,pin-pud = <3>;
> samsung,pin-drv = <0>;
> };
> dp-controller@145B0000 {
> pinctrl-names = "default";
> pinctrl-0 = <&dp_hpd_gpio>;
> ...
> samsung,hpd-gpio = <&gpx2 6 0>;
Ok.
>
> Best regards,
> Jingoo Han
>
>>
>> Regards,
>> Rahul Sharma.
>>
>> > Best regards,
>> > Jingoo Han
>> >
>> >>
>> >> pinctrl@13410000 {
>> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> index 6910485..62d38c8 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> @@ -138,6 +138,13 @@
>> >> samsung,pin-pud = <1>;
>> >> samsung,pin-drv = <0>;
>> >> };
>> >> +
>> >> + dp_hpd: dp_hpd {
>> >> + samsung,pins = "gpx0-7";
>> >> + samsung,pin-function = <3>;
>> >> + samsung,pin-pud = <0>;
>> >> + samsung,pin-drv = <0>;
>> >> + };
>> >> };
>> >>
>> >> hdmi@14530000 {
>> >> --
>> >> 1.7.9.5
>> >
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420
@ 2014-05-09 1:17 ` Rahul Sharma
0 siblings, 0 replies; 28+ messages in thread
From: Rahul Sharma @ 2014-05-09 1:17 UTC (permalink / raw)
To: linux-arm-kernel
On 9 May 2014 06:15, Jingoo Han <jg1.han@samsung.com> wrote:
> On Thursday, May 08, 2014 6:08 PM, Rahul Sharma wrote:
>> On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote:
>> > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>> >>
>> >> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>> >>
>> >> Display controller HPD Gpio line is board specific. This patch
>> >> is moving the pinctrl for hpd gpio line to the respective board
>> >> file.
>> >>
>> >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
>> >> ---
>> >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 -------
>> >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++
>> >> 2 files changed, 7 insertions(+), 7 deletions(-)
>> >>
>> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> index e62c8eb..5848c42 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> @@ -59,13 +59,6 @@
>> >> interrupt-controller;
>> >> #interrupt-cells = <2>;
>> >> };
>> >> -
>> >> - dp_hpd: dp_hpd {
>> >> - samsung,pins = "gpx0-7";
>> >> - samsung,pin-function = <3>;
>> >> - samsung,pin-pud = <0>;
>> >> - samsung,pin-drv = <0>;
>> >> - };
>> >> };
>> >
>> > (+cc Doug Anderson, Tomasz Figa)
>> >
>> > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
>> > So, there should be "gpx0-7" part on chip specific dts file such as
>> > 'exynos5420-pinctrl.dtsi'.
>> >
>> > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
>> > This is board specific. In my opinion, the following would look
>> > better. In this way, this patch is not necessary.
>> >
>> > 1. case: Standard HPD pin is used. (smdk5420)
>> > arch/arm/boot/dts/exynos5420-pinctrl.dts
>> > pinctrl at 13400000 {
>> > dp_hpd: dp_hpd {
>> > samsung,pins = "gpx0-7";
>> > samsung,pin-function = <3>;
>> > samsung,pin-pud = <0>;
>> > samsung,pin-drv = <0>;
>> > };
>> > arch/arm/boot/dts/exynos5420-smdk5420.dts
>> > dp-controller at 145B0000 {
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&dp_hpd>;
>> > ...
>> >
>> >
>> > 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
>> > arch/arm/boot/dts/exynos5420-peach-pit.dts
>> > pinctrl at 13400000 {
>> > dp_hpd: dp_hpd {
>> > samsung,pins = "gpx2-6";
>> > samsung,pin-function = <0>;
>> > samsung,pin-pud = <3>;
>> > samsung,pin-drv = <0>;
>> > };
>> > dp-controller at 145B0000 {
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&dp_hpd>;
>> > ...
>> > samsung,hpd-gpio = <&gpx2 6 0>;
>> >
>> > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
>> > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
>> > respectively.
>> >
>> > A year ago, Doug Anderson and me agreed that standard HPD pin
>> > part should be included to 'exynos5250-pinctrl.dtsi'.
>> > (https://lkml.org/lkml/2013/5/11/134)
>> >
>>
>> I wasn't aware of this discussion. It make sense. I will drop this patch.
>> I need to choose some other name for this pin, say "peach_dp_hpd".
>> Let me know if any concern.
>
> In my opinion, "dp_hpd_gpio" looks better as below.
>
> arch/arm/boot/dts/exynos5420-peach-pit.dts
> pinctrl at 13400000 {
> dp_hpd_gpio: dp_hpd_gpio {
> samsung,pins = "gpx2-6";
> samsung,pin-function = <0>;
> samsung,pin-pud = <3>;
> samsung,pin-drv = <0>;
> };
> dp-controller at 145B0000 {
> pinctrl-names = "default";
> pinctrl-0 = <&dp_hpd_gpio>;
> ...
> samsung,hpd-gpio = <&gpx2 6 0>;
Ok.
>
> Best regards,
> Jingoo Han
>
>>
>> Regards,
>> Rahul Sharma.
>>
>> > Best regards,
>> > Jingoo Han
>> >
>> >>
>> >> pinctrl at 13410000 {
>> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> index 6910485..62d38c8 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> @@ -138,6 +138,13 @@
>> >> samsung,pin-pud = <1>;
>> >> samsung,pin-drv = <0>;
>> >> };
>> >> +
>> >> + dp_hpd: dp_hpd {
>> >> + samsung,pins = "gpx0-7";
>> >> + samsung,pin-function = <3>;
>> >> + samsung,pin-pud = <0>;
>> >> + samsung,pin-drv = <0>;
>> >> + };
>> >> };
>> >>
>> >> hdmi at 14530000 {
>> >> --
>> >> 1.7.9.5
>> >
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 28+ messages in thread
end of thread, other threads:[~2014-05-09 1:17 UTC | newest]
Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-20 11:48 [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards Rahul Sharma
2014-04-20 11:48 ` Rahul Sharma
2014-04-20 11:48 ` [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420 Rahul Sharma
2014-04-20 11:48 ` Rahul Sharma
2014-05-08 6:32 ` Jingoo Han
2014-05-08 6:32 ` Jingoo Han
2014-05-08 9:08 ` Rahul Sharma
2014-05-08 9:08 ` Rahul Sharma
2014-05-09 0:45 ` Jingoo Han
2014-05-09 0:45 ` Jingoo Han
2014-05-09 1:17 ` Rahul Sharma
2014-05-09 1:17 ` Rahul Sharma
2014-04-20 11:48 ` [PATCH 2/5] ARM: dts: enable fimd for exynos5250 based snow board Rahul Sharma
2014-04-20 11:48 ` Rahul Sharma
2014-04-20 11:48 ` [PATCH 3/5] ARM: dts: enable dp-controller " Rahul Sharma
2014-04-20 11:48 ` Rahul Sharma
2014-05-07 13:36 ` Rahul Sharma
2014-05-07 13:36 ` Rahul Sharma
2014-04-20 11:48 ` [PATCH 4/5] ARM: dts: enable fimd for exynos5420 based peach-pit board Rahul Sharma
2014-04-20 11:48 ` Rahul Sharma
2014-04-20 11:48 ` [PATCH 5/5] ARM: dts: enable dp-controller " Rahul Sharma
2014-04-20 11:48 ` Rahul Sharma
2014-05-07 13:41 ` Rahul Sharma
2014-05-07 13:41 ` Rahul Sharma
[not found] ` <1397994525-18537-1-git-send-email-rahul.sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-04-25 9:45 ` [PATCH 0/5] ARM: dts: enable display for peach-pit and snow boards Arun Kumar K
2014-04-25 9:45 ` Arun Kumar K
2014-05-08 5:39 ` Jingoo Han
2014-05-08 5:39 ` Jingoo Han
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.