All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28  7:18 ` Jingoo Han
  0 siblings, 0 replies; 14+ messages in thread
From: Jingoo Han @ 2013-06-28  7:18 UTC (permalink / raw)
  To: linux-arm-kernel, linux-samsung-soc
  Cc: 'Kishon Vijay Abraham I',
	linux-media, 'Kukjin Kim', 'Sylwester Nawrocki',
	'Felipe Balbi', 'Tomasz Figa',
	devicetree-discuss, 'Inki Dae', 'Donghwa Lee',
	'Kyungmin Park',
	'Jean-Christophe PLAGNIOL-VILLARD',
	linux-fbdev, 'Jingoo Han'

Use the generic PHY API instead of the platform callback to control
the DP PHY. The 'phy_label' field is added to the platform data
structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
 .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
 drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
 drivers/video/exynos/exynos_dp_core.h              |    2 +
 include/video/exynos_dp.h                          |    6 +-
 4 files changed, 15 insertions(+), 128 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..a8320e3 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -1,17 +1,6 @@
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
-		Base address of DP PHY register.
-	-samsung,enable-mask:
-		The bit-mask used to enable/disable DP PHY.
-
 For the Panel initialization, we read data from dp-controller node.
 Required properties for dp-controller:
 	-compatible:
@@ -67,12 +56,6 @@ SOC specific portion:
 		interrupt-parent = <&combiner>;
 		clocks = <&clock 342>;
 		clock-names = "dp";
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
 	};
 
 Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 12bbede..bac515b 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 
 #include <video/exynos_dp.h>
 
@@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	return pd;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
-	u32 phy_base;
-	int ret = 0;
-
-	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
-	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
-		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
-				&dp->enable_mask)) {
-		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	dp->phy_addr = ioremap(phy_base, SZ_4);
-	if (!dp->phy_addr) {
-		dev_err(dp->dev, "failed to ioremap dp-phy\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-err:
-	of_node_put(dp_phy_node);
-
-	return ret;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = __raw_readl(dp->phy_addr);
-	reg |= dp->enable_mask;
-	__raw_writel(reg, dp->phy_addr);
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	u32 reg;
+	pd->phy_label = "dp";
 
-	reg = __raw_readl(dp->phy_addr);
-	reg &= ~(dp->enable_mask);
-	__raw_writel(reg, dp->phy_addr);
+	return pd;
 }
 #else
 static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 {
 	return NULL;
 }
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	return -EINVAL;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	return;
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	return;
-}
 #endif /* CONFIG_OF */
 
 static int exynos_dp_probe(struct platform_device *pdev)
@@ -1061,10 +993,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-
-		ret = exynos_dp_dt_parse_phydata(dp);
-		if (ret)
-			return ret;
 	} else {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
@@ -1073,6 +1001,10 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		}
 	}
 
+	dp->phy = devm_phy_get(&pdev->dev, pdata->phy_label);
+	if (IS_ERR(dp->phy))
+		return PTR_ERR(dp->phy);
+
 	dp->clock = devm_clk_get(&pdev->dev, "dp");
 	if (IS_ERR(dp->clock)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -1097,13 +1029,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	dp->video_info = pdata->video_info;
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	exynos_dp_init_dp(dp);
 
@@ -1121,42 +1047,27 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
-	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
 	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
 
 	flush_work(&dp->hotplug_work);
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
-
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int exynos_dp_suspend(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
 	disable_irq(dp->irq);
 
 	flush_work(&dp->hotplug_work);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1165,16 +1076,9 @@ static int exynos_dp_suspend(struct device *dev)
 
 static int exynos_dp_resume(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	clk_prepare_enable(dp->clock);
 
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6c567bbf..b3d0328 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -42,6 +42,8 @@ struct exynos_dp_device {
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
index bd8cabd..f38c9af 100644
--- a/include/video/exynos_dp.h
+++ b/include/video/exynos_dp.h
@@ -122,10 +122,8 @@ struct video_info {
 };
 
 struct exynos_dp_platdata {
-	struct video_info *video_info;
-
-	void (*phy_init)(void);
-	void (*phy_exit)(void);
+	struct video_info	*video_info;
+	const char		*phy_label;
 };
 
 #endif /* _EXYNOS_DP_H */
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28  7:18 ` Jingoo Han
  0 siblings, 0 replies; 14+ messages in thread
From: Jingoo Han @ 2013-06-28  7:18 UTC (permalink / raw)
  To: linux-arm-kernel

Use the generic PHY API instead of the platform callback to control
the DP PHY. The 'phy_label' field is added to the platform data
structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
 .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
 drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
 drivers/video/exynos/exynos_dp_core.h              |    2 +
 include/video/exynos_dp.h                          |    6 +-
 4 files changed, 15 insertions(+), 128 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..a8320e3 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -1,17 +1,6 @@
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
-		Base address of DP PHY register.
-	-samsung,enable-mask:
-		The bit-mask used to enable/disable DP PHY.
-
 For the Panel initialization, we read data from dp-controller node.
 Required properties for dp-controller:
 	-compatible:
@@ -67,12 +56,6 @@ SOC specific portion:
 		interrupt-parent = <&combiner>;
 		clocks = <&clock 342>;
 		clock-names = "dp";
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
 	};
 
 Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 12bbede..bac515b 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 
 #include <video/exynos_dp.h>
 
@@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	return pd;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
-	u32 phy_base;
-	int ret = 0;
-
-	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
-	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
-		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
-				&dp->enable_mask)) {
-		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	dp->phy_addr = ioremap(phy_base, SZ_4);
-	if (!dp->phy_addr) {
-		dev_err(dp->dev, "failed to ioremap dp-phy\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-err:
-	of_node_put(dp_phy_node);
-
-	return ret;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = __raw_readl(dp->phy_addr);
-	reg |= dp->enable_mask;
-	__raw_writel(reg, dp->phy_addr);
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	u32 reg;
+	pd->phy_label = "dp";
 
-	reg = __raw_readl(dp->phy_addr);
-	reg &= ~(dp->enable_mask);
-	__raw_writel(reg, dp->phy_addr);
+	return pd;
 }
 #else
 static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 {
 	return NULL;
 }
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	return -EINVAL;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	return;
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	return;
-}
 #endif /* CONFIG_OF */
 
 static int exynos_dp_probe(struct platform_device *pdev)
@@ -1061,10 +993,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-
-		ret = exynos_dp_dt_parse_phydata(dp);
-		if (ret)
-			return ret;
 	} else {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
@@ -1073,6 +1001,10 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		}
 	}
 
+	dp->phy = devm_phy_get(&pdev->dev, pdata->phy_label);
+	if (IS_ERR(dp->phy))
+		return PTR_ERR(dp->phy);
+
 	dp->clock = devm_clk_get(&pdev->dev, "dp");
 	if (IS_ERR(dp->clock)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -1097,13 +1029,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	dp->video_info = pdata->video_info;
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	exynos_dp_init_dp(dp);
 
@@ -1121,42 +1047,27 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
-	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
 	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
 
 	flush_work(&dp->hotplug_work);
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
-
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int exynos_dp_suspend(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
 	disable_irq(dp->irq);
 
 	flush_work(&dp->hotplug_work);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1165,16 +1076,9 @@ static int exynos_dp_suspend(struct device *dev)
 
 static int exynos_dp_resume(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	clk_prepare_enable(dp->clock);
 
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6c567bbf..b3d0328 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -42,6 +42,8 @@ struct exynos_dp_device {
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
index bd8cabd..f38c9af 100644
--- a/include/video/exynos_dp.h
+++ b/include/video/exynos_dp.h
@@ -122,10 +122,8 @@ struct video_info {
 };
 
 struct exynos_dp_platdata {
-	struct video_info *video_info;
-
-	void (*phy_init)(void);
-	void (*phy_exit)(void);
+	struct video_info	*video_info;
+	const char		*phy_label;
 };
 
 #endif /* _EXYNOS_DP_H */
-- 
1.7.10.4



^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28  7:18 ` Jingoo Han
  0 siblings, 0 replies; 14+ messages in thread
From: Jingoo Han @ 2013-06-28  7:18 UTC (permalink / raw)
  To: linux-arm-kernel

Use the generic PHY API instead of the platform callback to control
the DP PHY. The 'phy_label' field is added to the platform data
structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
 .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
 drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
 drivers/video/exynos/exynos_dp_core.h              |    2 +
 include/video/exynos_dp.h                          |    6 +-
 4 files changed, 15 insertions(+), 128 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..a8320e3 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -1,17 +1,6 @@
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
-		Base address of DP PHY register.
-	-samsung,enable-mask:
-		The bit-mask used to enable/disable DP PHY.
-
 For the Panel initialization, we read data from dp-controller node.
 Required properties for dp-controller:
 	-compatible:
@@ -67,12 +56,6 @@ SOC specific portion:
 		interrupt-parent = <&combiner>;
 		clocks = <&clock 342>;
 		clock-names = "dp";
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
 	};
 
 Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 12bbede..bac515b 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 
 #include <video/exynos_dp.h>
 
@@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	return pd;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
-	u32 phy_base;
-	int ret = 0;
-
-	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
-	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
-		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
-				&dp->enable_mask)) {
-		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	dp->phy_addr = ioremap(phy_base, SZ_4);
-	if (!dp->phy_addr) {
-		dev_err(dp->dev, "failed to ioremap dp-phy\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-err:
-	of_node_put(dp_phy_node);
-
-	return ret;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = __raw_readl(dp->phy_addr);
-	reg |= dp->enable_mask;
-	__raw_writel(reg, dp->phy_addr);
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	u32 reg;
+	pd->phy_label = "dp";
 
-	reg = __raw_readl(dp->phy_addr);
-	reg &= ~(dp->enable_mask);
-	__raw_writel(reg, dp->phy_addr);
+	return pd;
 }
 #else
 static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 {
 	return NULL;
 }
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	return -EINVAL;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	return;
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	return;
-}
 #endif /* CONFIG_OF */
 
 static int exynos_dp_probe(struct platform_device *pdev)
@@ -1061,10 +993,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-
-		ret = exynos_dp_dt_parse_phydata(dp);
-		if (ret)
-			return ret;
 	} else {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
@@ -1073,6 +1001,10 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		}
 	}
 
+	dp->phy = devm_phy_get(&pdev->dev, pdata->phy_label);
+	if (IS_ERR(dp->phy))
+		return PTR_ERR(dp->phy);
+
 	dp->clock = devm_clk_get(&pdev->dev, "dp");
 	if (IS_ERR(dp->clock)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -1097,13 +1029,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	dp->video_info = pdata->video_info;
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	exynos_dp_init_dp(dp);
 
@@ -1121,42 +1047,27 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
-	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
 	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
 
 	flush_work(&dp->hotplug_work);
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
-
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int exynos_dp_suspend(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
 	disable_irq(dp->irq);
 
 	flush_work(&dp->hotplug_work);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1165,16 +1076,9 @@ static int exynos_dp_suspend(struct device *dev)
 
 static int exynos_dp_resume(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	clk_prepare_enable(dp->clock);
 
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6c567bbf..b3d0328 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -42,6 +42,8 @@ struct exynos_dp_device {
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
index bd8cabd..f38c9af 100644
--- a/include/video/exynos_dp.h
+++ b/include/video/exynos_dp.h
@@ -122,10 +122,8 @@ struct video_info {
 };
 
 struct exynos_dp_platdata {
-	struct video_info *video_info;
-
-	void (*phy_init)(void);
-	void (*phy_exit)(void);
+	struct video_info	*video_info;
+	const char		*phy_label;
 };
 
 #endif /* _EXYNOS_DP_H */
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
  2013-06-28  7:18 ` Jingoo Han
  (?)
  (?)
@ 2013-06-28  9:35   ` Felipe Balbi
  -1 siblings, 0 replies; 14+ messages in thread
From: Felipe Balbi @ 2013-06-28  9:35 UTC (permalink / raw)
  To: Jingoo Han
  Cc: linux-arm-kernel, linux-samsung-soc,
	'Kishon Vijay Abraham I',
	linux-media, 'Kukjin Kim', 'Sylwester Nawrocki',
	'Felipe Balbi', 'Tomasz Figa',
	devicetree-discuss, 'Inki Dae', 'Donghwa Lee',
	'Kyungmin Park',
	'Jean-Christophe PLAGNIOL-VILLARD',
	linux-fbdev

[-- Attachment #1: Type: text/plain, Size: 3839 bytes --]

On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> Use the generic PHY API instead of the platform callback to control
> the DP PHY. The 'phy_label' field is added to the platform data
> structure to allow PHY lookup on non-dt platforms.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
>  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
>  drivers/video/exynos/exynos_dp_core.h              |    2 +
>  include/video/exynos_dp.h                          |    6 +-
>  4 files changed, 15 insertions(+), 128 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> index 84f10c1..a8320e3 100644
> --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> @@ -1,17 +1,6 @@
>  The Exynos display port interface should be configured based on
>  the type of panel connected to it.
>  
> -We use two nodes:
> -	-dp-controller node
> -	-dptx-phy node(defined inside dp-controller node)
> -
> -For the DP-PHY initialization, we use the dptx-phy node.
> -Required properties for dptx-phy:
> -	-reg:
> -		Base address of DP PHY register.
> -	-samsung,enable-mask:
> -		The bit-mask used to enable/disable DP PHY.
> -
>  For the Panel initialization, we read data from dp-controller node.
>  Required properties for dp-controller:
>  	-compatible:
> @@ -67,12 +56,6 @@ SOC specific portion:
>  		interrupt-parent = <&combiner>;
>  		clocks = <&clock 342>;
>  		clock-names = "dp";
> -
> -		dptx-phy {
> -			reg = <0x10040720>;
> -			samsung,enable-mask = <1>;
> -		};
> -
>  	};
>  
>  Board Specific portion:
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index 12bbede..bac515b 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -19,6 +19,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
>  #include <linux/of.h>
> +#include <linux/phy/phy.h>
>  
>  #include <video/exynos_dp.h>
>  
> @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
>  		return ERR_PTR(-EINVAL);
>  	}
>  
> -	return pd;
> -}
> -
> -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
> -{
> -	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
> -	u32 phy_base;
> -	int ret = 0;
> -
> -	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
> -	if (!dp_phy_node) {
> -		dev_err(dp->dev, "could not find dptx-phy node\n");
> -		return -ENODEV;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
> -		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
> -				&dp->enable_mask)) {
> -		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	dp->phy_addr = ioremap(phy_base, SZ_4);
> -	if (!dp->phy_addr) {
> -		dev_err(dp->dev, "failed to ioremap dp-phy\n");
> -		ret = -ENOMEM;
> -		goto err;
> -	}
> -
> -err:
> -	of_node_put(dp_phy_node);
> -
> -	return ret;
> -}
> -
> -static void exynos_dp_phy_init(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> -
> -	reg = __raw_readl(dp->phy_addr);
> -	reg |= dp->enable_mask;
> -	__raw_writel(reg, dp->phy_addr);
> -}
> -
> -static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> +	pd->phy_label = "dp";

only the label, which I would use 'display-port'. Other than that:

Acked-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28  9:35   ` Felipe Balbi
  0 siblings, 0 replies; 14+ messages in thread
From: Felipe Balbi @ 2013-06-28  9:35 UTC (permalink / raw)
  To: Jingoo Han
  Cc: linux-arm-kernel, linux-samsung-soc,
	'Kishon Vijay Abraham I',
	linux-media, 'Kukjin Kim', 'Sylwester Nawrocki',
	'Felipe Balbi', 'Tomasz Figa',
	devicetree-discuss, 'Inki Dae', 'Donghwa Lee',
	'Kyungmin Park',
	'Jean-Christophe PLAGNIOL-VILLARD',
	linux-fbdev

[-- Attachment #1: Type: text/plain, Size: 3839 bytes --]

On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> Use the generic PHY API instead of the platform callback to control
> the DP PHY. The 'phy_label' field is added to the platform data
> structure to allow PHY lookup on non-dt platforms.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
>  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
>  drivers/video/exynos/exynos_dp_core.h              |    2 +
>  include/video/exynos_dp.h                          |    6 +-
>  4 files changed, 15 insertions(+), 128 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> index 84f10c1..a8320e3 100644
> --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> @@ -1,17 +1,6 @@
>  The Exynos display port interface should be configured based on
>  the type of panel connected to it.
>  
> -We use two nodes:
> -	-dp-controller node
> -	-dptx-phy node(defined inside dp-controller node)
> -
> -For the DP-PHY initialization, we use the dptx-phy node.
> -Required properties for dptx-phy:
> -	-reg:
> -		Base address of DP PHY register.
> -	-samsung,enable-mask:
> -		The bit-mask used to enable/disable DP PHY.
> -
>  For the Panel initialization, we read data from dp-controller node.
>  Required properties for dp-controller:
>  	-compatible:
> @@ -67,12 +56,6 @@ SOC specific portion:
>  		interrupt-parent = <&combiner>;
>  		clocks = <&clock 342>;
>  		clock-names = "dp";
> -
> -		dptx-phy {
> -			reg = <0x10040720>;
> -			samsung,enable-mask = <1>;
> -		};
> -
>  	};
>  
>  Board Specific portion:
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index 12bbede..bac515b 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -19,6 +19,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
>  #include <linux/of.h>
> +#include <linux/phy/phy.h>
>  
>  #include <video/exynos_dp.h>
>  
> @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
>  		return ERR_PTR(-EINVAL);
>  	}
>  
> -	return pd;
> -}
> -
> -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
> -{
> -	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
> -	u32 phy_base;
> -	int ret = 0;
> -
> -	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
> -	if (!dp_phy_node) {
> -		dev_err(dp->dev, "could not find dptx-phy node\n");
> -		return -ENODEV;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
> -		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
> -				&dp->enable_mask)) {
> -		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	dp->phy_addr = ioremap(phy_base, SZ_4);
> -	if (!dp->phy_addr) {
> -		dev_err(dp->dev, "failed to ioremap dp-phy\n");
> -		ret = -ENOMEM;
> -		goto err;
> -	}
> -
> -err:
> -	of_node_put(dp_phy_node);
> -
> -	return ret;
> -}
> -
> -static void exynos_dp_phy_init(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> -
> -	reg = __raw_readl(dp->phy_addr);
> -	reg |= dp->enable_mask;
> -	__raw_writel(reg, dp->phy_addr);
> -}
> -
> -static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> +	pd->phy_label = "dp";

only the label, which I would use 'display-port'. Other than that:

Acked-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28  9:35   ` Felipe Balbi
  0 siblings, 0 replies; 14+ messages in thread
From: Felipe Balbi @ 2013-06-28  9:35 UTC (permalink / raw)
  To: linux-arm-kernel

[-- Attachment #1: Type: text/plain, Size: 3839 bytes --]

On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> Use the generic PHY API instead of the platform callback to control
> the DP PHY. The 'phy_label' field is added to the platform data
> structure to allow PHY lookup on non-dt platforms.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
>  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
>  drivers/video/exynos/exynos_dp_core.h              |    2 +
>  include/video/exynos_dp.h                          |    6 +-
>  4 files changed, 15 insertions(+), 128 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> index 84f10c1..a8320e3 100644
> --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> @@ -1,17 +1,6 @@
>  The Exynos display port interface should be configured based on
>  the type of panel connected to it.
>  
> -We use two nodes:
> -	-dp-controller node
> -	-dptx-phy node(defined inside dp-controller node)
> -
> -For the DP-PHY initialization, we use the dptx-phy node.
> -Required properties for dptx-phy:
> -	-reg:
> -		Base address of DP PHY register.
> -	-samsung,enable-mask:
> -		The bit-mask used to enable/disable DP PHY.
> -
>  For the Panel initialization, we read data from dp-controller node.
>  Required properties for dp-controller:
>  	-compatible:
> @@ -67,12 +56,6 @@ SOC specific portion:
>  		interrupt-parent = <&combiner>;
>  		clocks = <&clock 342>;
>  		clock-names = "dp";
> -
> -		dptx-phy {
> -			reg = <0x10040720>;
> -			samsung,enable-mask = <1>;
> -		};
> -
>  	};
>  
>  Board Specific portion:
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index 12bbede..bac515b 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -19,6 +19,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
>  #include <linux/of.h>
> +#include <linux/phy/phy.h>
>  
>  #include <video/exynos_dp.h>
>  
> @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
>  		return ERR_PTR(-EINVAL);
>  	}
>  
> -	return pd;
> -}
> -
> -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
> -{
> -	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
> -	u32 phy_base;
> -	int ret = 0;
> -
> -	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
> -	if (!dp_phy_node) {
> -		dev_err(dp->dev, "could not find dptx-phy node\n");
> -		return -ENODEV;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
> -		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
> -				&dp->enable_mask)) {
> -		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	dp->phy_addr = ioremap(phy_base, SZ_4);
> -	if (!dp->phy_addr) {
> -		dev_err(dp->dev, "failed to ioremap dp-phy\n");
> -		ret = -ENOMEM;
> -		goto err;
> -	}
> -
> -err:
> -	of_node_put(dp_phy_node);
> -
> -	return ret;
> -}
> -
> -static void exynos_dp_phy_init(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> -
> -	reg = __raw_readl(dp->phy_addr);
> -	reg |= dp->enable_mask;
> -	__raw_writel(reg, dp->phy_addr);
> -}
> -
> -static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> +	pd->phy_label = "dp";

only the label, which I would use 'display-port'. Other than that:

Acked-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28  9:35   ` Felipe Balbi
  0 siblings, 0 replies; 14+ messages in thread
From: Felipe Balbi @ 2013-06-28  9:35 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> Use the generic PHY API instead of the platform callback to control
> the DP PHY. The 'phy_label' field is added to the platform data
> structure to allow PHY lookup on non-dt platforms.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
>  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
>  drivers/video/exynos/exynos_dp_core.h              |    2 +
>  include/video/exynos_dp.h                          |    6 +-
>  4 files changed, 15 insertions(+), 128 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> index 84f10c1..a8320e3 100644
> --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> @@ -1,17 +1,6 @@
>  The Exynos display port interface should be configured based on
>  the type of panel connected to it.
>  
> -We use two nodes:
> -	-dp-controller node
> -	-dptx-phy node(defined inside dp-controller node)
> -
> -For the DP-PHY initialization, we use the dptx-phy node.
> -Required properties for dptx-phy:
> -	-reg:
> -		Base address of DP PHY register.
> -	-samsung,enable-mask:
> -		The bit-mask used to enable/disable DP PHY.
> -
>  For the Panel initialization, we read data from dp-controller node.
>  Required properties for dp-controller:
>  	-compatible:
> @@ -67,12 +56,6 @@ SOC specific portion:
>  		interrupt-parent = <&combiner>;
>  		clocks = <&clock 342>;
>  		clock-names = "dp";
> -
> -		dptx-phy {
> -			reg = <0x10040720>;
> -			samsung,enable-mask = <1>;
> -		};
> -
>  	};
>  
>  Board Specific portion:
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index 12bbede..bac515b 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -19,6 +19,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
>  #include <linux/of.h>
> +#include <linux/phy/phy.h>
>  
>  #include <video/exynos_dp.h>
>  
> @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
>  		return ERR_PTR(-EINVAL);
>  	}
>  
> -	return pd;
> -}
> -
> -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
> -{
> -	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
> -	u32 phy_base;
> -	int ret = 0;
> -
> -	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
> -	if (!dp_phy_node) {
> -		dev_err(dp->dev, "could not find dptx-phy node\n");
> -		return -ENODEV;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
> -		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
> -				&dp->enable_mask)) {
> -		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
> -		ret = -EINVAL;
> -		goto err;
> -	}
> -
> -	dp->phy_addr = ioremap(phy_base, SZ_4);
> -	if (!dp->phy_addr) {
> -		dev_err(dp->dev, "failed to ioremap dp-phy\n");
> -		ret = -ENOMEM;
> -		goto err;
> -	}
> -
> -err:
> -	of_node_put(dp_phy_node);
> -
> -	return ret;
> -}
> -
> -static void exynos_dp_phy_init(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> -
> -	reg = __raw_readl(dp->phy_addr);
> -	reg |= dp->enable_mask;
> -	__raw_writel(reg, dp->phy_addr);
> -}
> -
> -static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
> -{
> -	u32 reg;
> +	pd->phy_label = "dp";

only the label, which I would use 'display-port'. Other than that:

Acked-by: Felipe Balbi <balbi@ti.com>

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130628/149b1753/attachment.sig>

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
  2013-06-28  9:35   ` Felipe Balbi
  (?)
  (?)
@ 2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
  -1 siblings, 0 replies; 14+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-06-28 10:27 UTC (permalink / raw)
  To: Felipe Balbi, Grant Likely
  Cc: linux-fbdev, 'Kukjin Kim', 'Tomasz Figa',
	Jingoo Han, 'Donghwa Lee',
	'Kishon Vijay Abraham I', 'Inki Dae',
	'Kyungmin Park',
	linux-samsung-soc, 'Sylwester Nawrocki',
	devicetree-discuss, linux-arm-kernel, linux-media

On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
> On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> > Use the generic PHY API instead of the platform callback to control
> > the DP PHY. The 'phy_label' field is added to the platform data
> > structure to allow PHY lookup on non-dt platforms.
> > 
> > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
> >  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
> >  drivers/video/exynos/exynos_dp_core.h              |    2 +
> >  include/video/exynos_dp.h                          |    6 +-
> >  4 files changed, 15 insertions(+), 128 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > index 84f10c1..a8320e3 100644
> > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > @@ -1,17 +1,6 @@
> >  The Exynos display port interface should be configured based on
> >  the type of panel connected to it.
> >  
> > -We use two nodes:
> > -	-dp-controller node
> > -	-dptx-phy node(defined inside dp-controller node)
> > -
> > -For the DP-PHY initialization, we use the dptx-phy node.
> > -Required properties for dptx-phy:
> > -	-reg:
> > -		Base address of DP PHY register.
> > -	-samsung,enable-mask:
> > -		The bit-mask used to enable/disable DP PHY.
> > -
> >  For the Panel initialization, we read data from dp-controller node.
> >  Required properties for dp-controller:
> >  	-compatible:
> > @@ -67,12 +56,6 @@ SOC specific portion:
> >  		interrupt-parent = <&combiner>;
> >  		clocks = <&clock 342>;
> >  		clock-names = "dp";
> > -
> > -		dptx-phy {
> > -			reg = <0x10040720>;
> > -			samsung,enable-mask = <1>;
> > -		};
I've an issue here you break dt compatibilty

Best Regards,
J.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 0 replies; 14+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-06-28 10:27 UTC (permalink / raw)
  To: Felipe Balbi, Grant Likely
  Cc: Jingoo Han, linux-arm-kernel, linux-samsung-soc,
	'Kishon Vijay Abraham I',
	linux-media, 'Kukjin Kim', 'Sylwester Nawrocki',
	'Tomasz Figa', devicetree-discuss, 'Inki Dae',
	'Donghwa Lee', 'Kyungmin Park',
	linux-fbdev

On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
> On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> > Use the generic PHY API instead of the platform callback to control
> > the DP PHY. The 'phy_label' field is added to the platform data
> > structure to allow PHY lookup on non-dt platforms.
> > 
> > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
> >  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
> >  drivers/video/exynos/exynos_dp_core.h              |    2 +
> >  include/video/exynos_dp.h                          |    6 +-
> >  4 files changed, 15 insertions(+), 128 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > index 84f10c1..a8320e3 100644
> > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > @@ -1,17 +1,6 @@
> >  The Exynos display port interface should be configured based on
> >  the type of panel connected to it.
> >  
> > -We use two nodes:
> > -	-dp-controller node
> > -	-dptx-phy node(defined inside dp-controller node)
> > -
> > -For the DP-PHY initialization, we use the dptx-phy node.
> > -Required properties for dptx-phy:
> > -	-reg:
> > -		Base address of DP PHY register.
> > -	-samsung,enable-mask:
> > -		The bit-mask used to enable/disable DP PHY.
> > -
> >  For the Panel initialization, we read data from dp-controller node.
> >  Required properties for dp-controller:
> >  	-compatible:
> > @@ -67,12 +56,6 @@ SOC specific portion:
> >  		interrupt-parent = <&combiner>;
> >  		clocks = <&clock 342>;
> >  		clock-names = "dp";
> > -
> > -		dptx-phy {
> > -			reg = <0x10040720>;
> > -			samsung,enable-mask = <1>;
> > -		};
I've an issue here you break dt compatibilty

Best Regards,
J.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 0 replies; 14+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-06-28 10:27 UTC (permalink / raw)
  To: linux-arm-kernel

On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
> On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> > Use the generic PHY API instead of the platform callback to control
> > the DP PHY. The 'phy_label' field is added to the platform data
> > structure to allow PHY lookup on non-dt platforms.
> > 
> > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
> >  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
> >  drivers/video/exynos/exynos_dp_core.h              |    2 +
> >  include/video/exynos_dp.h                          |    6 +-
> >  4 files changed, 15 insertions(+), 128 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > index 84f10c1..a8320e3 100644
> > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > @@ -1,17 +1,6 @@
> >  The Exynos display port interface should be configured based on
> >  the type of panel connected to it.
> >  
> > -We use two nodes:
> > -	-dp-controller node
> > -	-dptx-phy node(defined inside dp-controller node)
> > -
> > -For the DP-PHY initialization, we use the dptx-phy node.
> > -Required properties for dptx-phy:
> > -	-reg:
> > -		Base address of DP PHY register.
> > -	-samsung,enable-mask:
> > -		The bit-mask used to enable/disable DP PHY.
> > -
> >  For the Panel initialization, we read data from dp-controller node.
> >  Required properties for dp-controller:
> >  	-compatible:
> > @@ -67,12 +56,6 @@ SOC specific portion:
> >  		interrupt-parent = <&combiner>;
> >  		clocks = <&clock 342>;
> >  		clock-names = "dp";
> > -
> > -		dptx-phy {
> > -			reg = <0x10040720>;
> > -			samsung,enable-mask = <1>;
> > -		};
I've an issue here you break dt compatibilty

Best Regards,
J.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 0 replies; 14+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-06-28 10:27 UTC (permalink / raw)
  To: linux-arm-kernel

On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
> On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
> > Use the generic PHY API instead of the platform callback to control
> > the DP PHY. The 'phy_label' field is added to the platform data
> > structure to allow PHY lookup on non-dt platforms.
> > 
> > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  .../devicetree/bindings/video/exynos_dp.txt        |   17 ---
> >  drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
> >  drivers/video/exynos/exynos_dp_core.h              |    2 +
> >  include/video/exynos_dp.h                          |    6 +-
> >  4 files changed, 15 insertions(+), 128 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > index 84f10c1..a8320e3 100644
> > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > @@ -1,17 +1,6 @@
> >  The Exynos display port interface should be configured based on
> >  the type of panel connected to it.
> >  
> > -We use two nodes:
> > -	-dp-controller node
> > -	-dptx-phy node(defined inside dp-controller node)
> > -
> > -For the DP-PHY initialization, we use the dptx-phy node.
> > -Required properties for dptx-phy:
> > -	-reg:
> > -		Base address of DP PHY register.
> > -	-samsung,enable-mask:
> > -		The bit-mask used to enable/disable DP PHY.
> > -
> >  For the Panel initialization, we read data from dp-controller node.
> >  Required properties for dp-controller:
> >  	-compatible:
> > @@ -67,12 +56,6 @@ SOC specific portion:
> >  		interrupt-parent = <&combiner>;
> >  		clocks = <&clock 342>;
> >  		clock-names = "dp";
> > -
> > -		dptx-phy {
> > -			reg = <0x10040720>;
> > -			samsung,enable-mask = <1>;
> > -		};
I've an issue here you break dt compatibilty

Best Regards,
J.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
  2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
  (?)
@ 2013-06-28 12:04       ` Sylwester Nawrocki
  -1 siblings, 0 replies; 14+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 12:04 UTC (permalink / raw)
  To: Jean-Christophe PLAGNIOL-VILLARD
  Cc: Felipe Balbi, Grant Likely, linux-fbdev, 'Kukjin Kim',
	'Tomasz Figa', Jingoo Han, 'Donghwa Lee',
	'Kishon Vijay Abraham I', 'Inki Dae',
	'Kyungmin Park',
	linux-samsung-soc, devicetree-discuss, linux-arm-kernel,
	linux-media

Hi,

On 06/28/2013 12:27 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
>> > On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
>>> > > Use the generic PHY API instead of the platform callback to control
>>> > > the DP PHY. The 'phy_label' field is added to the platform data
>>> > > structure to allow PHY lookup on non-dt platforms.
>>> > > 
>>> > > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
>>> > > ---
[...]
>>> > > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > index 84f10c1..a8320e3 100644
>>> > > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > @@ -1,17 +1,6 @@
>>> > >  The Exynos display port interface should be configured based on
>>> > >  the type of panel connected to it.
>>> > >  
>>> > > -We use two nodes:
>>> > > -	-dp-controller node
>>> > > -	-dptx-phy node(defined inside dp-controller node)
>>> > > -
>>> > > -For the DP-PHY initialization, we use the dptx-phy node.
>>> > > -Required properties for dptx-phy:
>>> > > -	-reg:
>>> > > -		Base address of DP PHY register.
>>> > > -	-samsung,enable-mask:
>>> > > -		The bit-mask used to enable/disable DP PHY.
>>> > > -
>>> > >  For the Panel initialization, we read data from dp-controller node.
>>> > >  Required properties for dp-controller:
>>> > >  	-compatible:
>>> > > @@ -67,12 +56,6 @@ SOC specific portion:
>>> > >  		interrupt-parent = <&combiner>;
>>> > >  		clocks = <&clock 342>;
>>> > >  		clock-names = "dp";
>>> > > -
>>> > > -		dptx-phy {
>>> > > -			reg = <0x10040720>;
>>> > > -			samsung,enable-mask = <1>;
>>> > > -		};
>
> I've an issue here you break dt compatibilty

Indeed. Ideally the PHYs should be detachable from the controllers.
I'd assume such a change could be acceptable, given that the driver
still supports the original binding.

--
Thanks,
Sylwester

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28 12:04       ` Sylwester Nawrocki
  0 siblings, 0 replies; 14+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 12:04 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

On 06/28/2013 12:27 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
>> > On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
>>> > > Use the generic PHY API instead of the platform callback to control
>>> > > the DP PHY. The 'phy_label' field is added to the platform data
>>> > > structure to allow PHY lookup on non-dt platforms.
>>> > > 
>>> > > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
>>> > > ---
[...]
>>> > > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > index 84f10c1..a8320e3 100644
>>> > > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > @@ -1,17 +1,6 @@
>>> > >  The Exynos display port interface should be configured based on
>>> > >  the type of panel connected to it.
>>> > >  
>>> > > -We use two nodes:
>>> > > -	-dp-controller node
>>> > > -	-dptx-phy node(defined inside dp-controller node)
>>> > > -
>>> > > -For the DP-PHY initialization, we use the dptx-phy node.
>>> > > -Required properties for dptx-phy:
>>> > > -	-reg:
>>> > > -		Base address of DP PHY register.
>>> > > -	-samsung,enable-mask:
>>> > > -		The bit-mask used to enable/disable DP PHY.
>>> > > -
>>> > >  For the Panel initialization, we read data from dp-controller node.
>>> > >  Required properties for dp-controller:
>>> > >  	-compatible:
>>> > > @@ -67,12 +56,6 @@ SOC specific portion:
>>> > >  		interrupt-parent = <&combiner>;
>>> > >  		clocks = <&clock 342>;
>>> > >  		clock-names = "dp";
>>> > > -
>>> > > -		dptx-phy {
>>> > > -			reg = <0x10040720>;
>>> > > -			samsung,enable-mask = <1>;
>>> > > -		};
>
> I've an issue here you break dt compatibilty

Indeed. Ideally the PHYs should be detachable from the controllers.
I'd assume such a change could be acceptable, given that the driver
still supports the original binding.

--
Thanks,
Sylwester

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver
@ 2013-06-28 12:04       ` Sylwester Nawrocki
  0 siblings, 0 replies; 14+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 12:04 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

On 06/28/2013 12:27 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
>> > On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
>>> > > Use the generic PHY API instead of the platform callback to control
>>> > > the DP PHY. The 'phy_label' field is added to the platform data
>>> > > structure to allow PHY lookup on non-dt platforms.
>>> > > 
>>> > > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
>>> > > ---
[...]
>>> > > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > index 84f10c1..a8320e3 100644
>>> > > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > @@ -1,17 +1,6 @@
>>> > >  The Exynos display port interface should be configured based on
>>> > >  the type of panel connected to it.
>>> > >  
>>> > > -We use two nodes:
>>> > > -	-dp-controller node
>>> > > -	-dptx-phy node(defined inside dp-controller node)
>>> > > -
>>> > > -For the DP-PHY initialization, we use the dptx-phy node.
>>> > > -Required properties for dptx-phy:
>>> > > -	-reg:
>>> > > -		Base address of DP PHY register.
>>> > > -	-samsung,enable-mask:
>>> > > -		The bit-mask used to enable/disable DP PHY.
>>> > > -
>>> > >  For the Panel initialization, we read data from dp-controller node.
>>> > >  Required properties for dp-controller:
>>> > >  	-compatible:
>>> > > @@ -67,12 +56,6 @@ SOC specific portion:
>>> > >  		interrupt-parent = <&combiner>;
>>> > >  		clocks = <&clock 342>;
>>> > >  		clock-names = "dp";
>>> > > -
>>> > > -		dptx-phy {
>>> > > -			reg = <0x10040720>;
>>> > > -			samsung,enable-mask = <1>;
>>> > > -		};
>
> I've an issue here you break dt compatibilty

Indeed. Ideally the PHYs should be detachable from the controllers.
I'd assume such a change could be acceptable, given that the driver
still supports the original binding.

--
Thanks,
Sylwester

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2013-06-28 14:09 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-28  7:18 [PATCH V2 3/3] video: exynos_dp: Use the generic PHY driver Jingoo Han
2013-06-28  7:18 ` Jingoo Han
2013-06-28  7:18 ` Jingoo Han
2013-06-28  9:35 ` Felipe Balbi
2013-06-28  9:35   ` Felipe Balbi
2013-06-28  9:35   ` Felipe Balbi
2013-06-28  9:35   ` Felipe Balbi
2013-06-28 10:27   ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-28 10:27     ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-28 12:04     ` Sylwester Nawrocki
2013-06-28 12:04       ` Sylwester Nawrocki
2013-06-28 12:04       ` Sylwester Nawrocki

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.