[PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors
@ 2023-06-16 15:06 ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users, Petr Mladek

Hi,

this patchset is supposed to replace the last patch in the patchset cleaning
up after introducing the buddy detector, see
https://lore.kernel.org/r/20230526184139.10.I821fe7609e57608913fe05abd8f35b343e7a9aae@changeid

Changes against v1:

  + Better explained the C-like ordering in the 1st patch.

  + Squashed patches for splitting and renaming HAVE_NMI_WATCHDOG,
    updated commit message with the history and more facts.

  + Updated comments about the sparc64 variant. It is not handled together
    with the softlockup detector. In fact, it is always build. And it even
    used to be always enabled until the commit 7a5c8b57cec93196b ("sparc:
    implement watchdog_nmi_enable and watchdog_nmi_disable") added in
    v4.10-rc1.

    I realized this when updating the comment for the 4th patch. My original
    statement in v1 patchset was based on code reading. I looked at it from
    a bad side.

  + Removed superfluous "default n"
  + Fixed typos.

Petr Mladek (6):
  watchdog/hardlockup: Sort hardlockup detector related config values a
    logical way
  watchdog/hardlockup: Make the config checks more straightforward
  watchdog/hardlockup: Declare arch_touch_nmi_watchdog() only in
    linux/nmi.h
  watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH

 arch/Kconfig                   |  17 ++---
 arch/powerpc/Kconfig           |   5 +-
 arch/powerpc/include/asm/nmi.h |   2 -
 arch/sparc/Kconfig             |   2 +-
 arch/sparc/Kconfig.debug       |  14 ++++
 arch/sparc/include/asm/nmi.h   |   1 -
 include/linux/nmi.h            |  14 ++--
 kernel/watchdog.c              |   2 +-
 lib/Kconfig.debug              | 114 ++++++++++++++++++---------------
 9 files changed, 97 insertions(+), 74 deletions(-)

-- 
2.35.3


^ permalink raw reply	[flat|nested] 36+ messages in thread

* [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors
@ 2023-06-16 15:06 ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

Hi,

this patchset is supposed to replace the last patch in the patchset cleaning
up after introducing the buddy detector, see
https://lore.kernel.org/r/20230526184139.10.I821fe7609e57608913fe05abd8f35b343e7a9aae@changeid

Changes against v1:

  + Better explained the C-like ordering in the 1st patch.

  + Squashed patches for splitting and renaming HAVE_NMI_WATCHDOG,
    updated commit message with the history and more facts.

  + Updated comments about the sparc64 variant. It is not handled together
    with the softlockup detector. In fact, it is always build. And it even
    used to be always enabled until the commit 7a5c8b57cec93196b ("sparc:
    implement watchdog_nmi_enable and watchdog_nmi_disable") added in
    v4.10-rc1.

    I realized this when updating the comment for the 4th patch. My original
    statement in v1 patchset was based on code reading. I looked at it from
    a bad side.

  + Removed superfluous "default n"
  + Fixed typos.

Petr Mladek (6):
  watchdog/hardlockup: Sort hardlockup detector related config values a
    logical way
  watchdog/hardlockup: Make the config checks more straightforward
  watchdog/hardlockup: Declare arch_touch_nmi_watchdog() only in
    linux/nmi.h
  watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH

 arch/Kconfig                   |  17 ++---
 arch/powerpc/Kconfig           |   5 +-
 arch/powerpc/include/asm/nmi.h |   2 -
 arch/sparc/Kconfig             |   2 +-
 arch/sparc/Kconfig.debug       |  14 ++++
 arch/sparc/include/asm/nmi.h   |   1 -
 include/linux/nmi.h            |  14 ++--
 kernel/watchdog.c              |   2 +-
 lib/Kconfig.debug              | 114 ++++++++++++++++++---------------
 9 files changed, 97 insertions(+), 74 deletions(-)

-- 
2.35.3


^ permalink raw reply	[flat|nested] 36+ messages in thread

* [PATCH v2 1/6] watchdog/hardlockup: Sort hardlockup detector related config values a logical way
  2023-06-16 15:06 ` Petr Mladek
@ 2023-06-16 15:06   ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users, Petr Mladek

There are four possible variants of hardlockup detectors:

  + buddy: available when SMP is set.

  + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.

  + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.

  + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
	and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.

Only one hardlockup detector can be compiled in. The selection is done
using quite complex dependencies between several CONFIG variables.
The following patches will try to make it more straightforward.

As a first step, reorder the definitions of the various CONFIG variables.
The logical order is:

   1. HAVE_* variables define available variants. They are typically
      defined in the arch/ config files.

   2. HARDLOCKUP_DETECTOR y/n variable defines whether the hardlockup
      detector is enabled at all.

   3. HARDLOCKUP_DETECTOR_PREFER_BUDDY y/n variable defines whether
      the buddy detector should be preferred over the perf one.
      Note that the arch specific variants are always preferred when
      available.

   4. HARDLOCKUP_DETECTOR_PERF/BUDDY variables define whether the given
      detector is enabled in the end.

   5. HAVE_HARDLOCKUP_DETECTOR_NON_ARCH and HARDLOCKUP_DETECTOR_NON_ARCH
      are temporary variables that are going to be removed in
      a followup patch.

This is a preparation step for further cleanup. It will change the logic
without shuffling the definitions.

This change temporary breaks the C-like ordering where the variables are
declared or defined before they are used. It is not really needed for
Kconfig. Also the following patches will rework the logic so that
the ordering will be C-like in the end.

The patch just shuffles the definitions. It should not change the existing
behavior.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 lib/Kconfig.debug | 112 +++++++++++++++++++++++-----------------------
 1 file changed, 56 insertions(+), 56 deletions(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ed7b01c4bd41..3e91fa33c7a0 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1035,62 +1035,6 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 	  Say N if unsure.
 
-# Both the "perf" and "buddy" hardlockup detectors count hrtimer
-# interrupts. This config enables functions managing this common code.
-config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-	bool
-	select SOFTLOCKUP_DETECTOR
-
-config HARDLOCKUP_DETECTOR_PERF
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
-	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-
-config HARDLOCKUP_DETECTOR_BUDDY
-	bool
-	depends on SMP
-	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-
-# For hardlockup detectors you can have one directly provided by the arch
-# or use a "non-arch" one. If you're using a "non-arch" one that is
-# further divided the perf hardlockup detector (which, confusingly, needs
-# arch-provided perf support) and the buddy hardlockup detector (which just
-# needs SMP). In either case, using the "non-arch" code conflicts with
-# the NMI watchdog code (which is sometimes used directly and sometimes used
-# by the arch-provided hardlockup detector).
-config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
-	default y
-
-config HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	bool "Prefer the buddy CPU hardlockup detector"
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
-	help
-	  Say Y here to prefer the buddy hardlockup detector over the perf one.
-
-	  With the buddy detector, each CPU uses its softlockup hrtimer
-	  to check that the next CPU is processing hrtimer interrupts by
-	  verifying that a counter is increasing.
-
-	  This hardlockup detector is useful on systems that don't have
-	  an arch-specific hardlockup detector or if resources needed
-	  for the hardlockup detector are better used for other things.
-
-# This will select the appropriate non-arch hardlockdup detector
-config HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
-
-#
-# Enables a timestamp based low pass filter to compensate for perf based
-# hard lockup detection which runs too fast due to turbo modes.
-#
-config HARDLOCKUP_CHECK_TIMESTAMP
-	bool
-
 #
 # arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
 # lockup detector rather than the perf based detector.
@@ -1111,6 +1055,62 @@ config HARDLOCKUP_DETECTOR
 	  chance to run.  The current stack trace is displayed upon detection
 	  and the system will stay locked up.
 
+config HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	bool "Prefer the buddy CPU hardlockup detector"
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
+	help
+	  Say Y here to prefer the buddy hardlockup detector over the perf one.
+
+	  With the buddy detector, each CPU uses its softlockup hrtimer
+	  to check that the next CPU is processing hrtimer interrupts by
+	  verifying that a counter is increasing.
+
+	  This hardlockup detector is useful on systems that don't have
+	  an arch-specific hardlockup detector or if resources needed
+	  for the hardlockup detector are better used for other things.
+
+config HARDLOCKUP_DETECTOR_PERF
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
+	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+
+config HARDLOCKUP_DETECTOR_BUDDY
+	bool
+	depends on SMP
+	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+
+# Both the "perf" and "buddy" hardlockup detectors count hrtimer
+# interrupts. This config enables functions managing this common code.
+config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+	bool
+	select SOFTLOCKUP_DETECTOR
+
+# For hardlockup detectors you can have one directly provided by the arch
+# or use a "non-arch" one. If you're using a "non-arch" one that is
+# further divided the perf hardlockup detector (which, confusingly, needs
+# arch-provided perf support) and the buddy hardlockup detector (which just
+# needs SMP). In either case, using the "non-arch" code conflicts with
+# the NMI watchdog code (which is sometimes used directly and sometimes used
+# by the arch-provided hardlockup detector).
+config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
+	bool
+	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
+	default y
+
+# This will select the appropriate non-arch hardlockdup detector
+config HARDLOCKUP_DETECTOR_NON_ARCH
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
+	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
+
+#
+# Enables a timestamp based low pass filter to compensate for perf based
+# hard lockup detection which runs too fast due to turbo modes.
+#
+config HARDLOCKUP_CHECK_TIMESTAMP
+	bool
+
 config BOOTPARAM_HARDLOCKUP_PANIC
 	bool "Panic (Reboot) On Hard Lockups"
 	depends on HARDLOCKUP_DETECTOR
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 1/6] watchdog/hardlockup: Sort hardlockup detector related config values a logical way
@ 2023-06-16 15:06   ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

There are four possible variants of hardlockup detectors:

  + buddy: available when SMP is set.

  + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.

  + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.

  + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
	and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.

Only one hardlockup detector can be compiled in. The selection is done
using quite complex dependencies between several CONFIG variables.
The following patches will try to make it more straightforward.

As a first step, reorder the definitions of the various CONFIG variables.
The logical order is:

   1. HAVE_* variables define available variants. They are typically
      defined in the arch/ config files.

   2. HARDLOCKUP_DETECTOR y/n variable defines whether the hardlockup
      detector is enabled at all.

   3. HARDLOCKUP_DETECTOR_PREFER_BUDDY y/n variable defines whether
      the buddy detector should be preferred over the perf one.
      Note that the arch specific variants are always preferred when
      available.

   4. HARDLOCKUP_DETECTOR_PERF/BUDDY variables define whether the given
      detector is enabled in the end.

   5. HAVE_HARDLOCKUP_DETECTOR_NON_ARCH and HARDLOCKUP_DETECTOR_NON_ARCH
      are temporary variables that are going to be removed in
      a followup patch.

This is a preparation step for further cleanup. It will change the logic
without shuffling the definitions.

This change temporary breaks the C-like ordering where the variables are
declared or defined before they are used. It is not really needed for
Kconfig. Also the following patches will rework the logic so that
the ordering will be C-like in the end.

The patch just shuffles the definitions. It should not change the existing
behavior.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 lib/Kconfig.debug | 112 +++++++++++++++++++++++-----------------------
 1 file changed, 56 insertions(+), 56 deletions(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ed7b01c4bd41..3e91fa33c7a0 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1035,62 +1035,6 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 	  Say N if unsure.
 
-# Both the "perf" and "buddy" hardlockup detectors count hrtimer
-# interrupts. This config enables functions managing this common code.
-config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-	bool
-	select SOFTLOCKUP_DETECTOR
-
-config HARDLOCKUP_DETECTOR_PERF
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
-	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-
-config HARDLOCKUP_DETECTOR_BUDDY
-	bool
-	depends on SMP
-	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
-
-# For hardlockup detectors you can have one directly provided by the arch
-# or use a "non-arch" one. If you're using a "non-arch" one that is
-# further divided the perf hardlockup detector (which, confusingly, needs
-# arch-provided perf support) and the buddy hardlockup detector (which just
-# needs SMP). In either case, using the "non-arch" code conflicts with
-# the NMI watchdog code (which is sometimes used directly and sometimes used
-# by the arch-provided hardlockup detector).
-config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
-	default y
-
-config HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	bool "Prefer the buddy CPU hardlockup detector"
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
-	help
-	  Say Y here to prefer the buddy hardlockup detector over the perf one.
-
-	  With the buddy detector, each CPU uses its softlockup hrtimer
-	  to check that the next CPU is processing hrtimer interrupts by
-	  verifying that a counter is increasing.
-
-	  This hardlockup detector is useful on systems that don't have
-	  an arch-specific hardlockup detector or if resources needed
-	  for the hardlockup detector are better used for other things.
-
-# This will select the appropriate non-arch hardlockdup detector
-config HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
-
-#
-# Enables a timestamp based low pass filter to compensate for perf based
-# hard lockup detection which runs too fast due to turbo modes.
-#
-config HARDLOCKUP_CHECK_TIMESTAMP
-	bool
-
 #
 # arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
 # lockup detector rather than the perf based detector.
@@ -1111,6 +1055,62 @@ config HARDLOCKUP_DETECTOR
 	  chance to run.  The current stack trace is displayed upon detection
 	  and the system will stay locked up.
 
+config HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	bool "Prefer the buddy CPU hardlockup detector"
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
+	help
+	  Say Y here to prefer the buddy hardlockup detector over the perf one.
+
+	  With the buddy detector, each CPU uses its softlockup hrtimer
+	  to check that the next CPU is processing hrtimer interrupts by
+	  verifying that a counter is increasing.
+
+	  This hardlockup detector is useful on systems that don't have
+	  an arch-specific hardlockup detector or if resources needed
+	  for the hardlockup detector are better used for other things.
+
+config HARDLOCKUP_DETECTOR_PERF
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
+	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+
+config HARDLOCKUP_DETECTOR_BUDDY
+	bool
+	depends on SMP
+	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+
+# Both the "perf" and "buddy" hardlockup detectors count hrtimer
+# interrupts. This config enables functions managing this common code.
+config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
+	bool
+	select SOFTLOCKUP_DETECTOR
+
+# For hardlockup detectors you can have one directly provided by the arch
+# or use a "non-arch" one. If you're using a "non-arch" one that is
+# further divided the perf hardlockup detector (which, confusingly, needs
+# arch-provided perf support) and the buddy hardlockup detector (which just
+# needs SMP). In either case, using the "non-arch" code conflicts with
+# the NMI watchdog code (which is sometimes used directly and sometimes used
+# by the arch-provided hardlockup detector).
+config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
+	bool
+	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
+	default y
+
+# This will select the appropriate non-arch hardlockdup detector
+config HARDLOCKUP_DETECTOR_NON_ARCH
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
+	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
+
+#
+# Enables a timestamp based low pass filter to compensate for perf based
+# hard lockup detection which runs too fast due to turbo modes.
+#
+config HARDLOCKUP_CHECK_TIMESTAMP
+	bool
+
 config BOOTPARAM_HARDLOCKUP_PANIC
 	bool "Panic (Reboot) On Hard Lockups"
 	depends on HARDLOCKUP_DETECTOR
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 2/6] watchdog/hardlockup: Make the config checks more straightforward
  2023-06-16 15:06 ` Petr Mladek
@ 2023-06-16 15:06   ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users, Petr Mladek

There are four possible variants of hardlockup detectors:

  + buddy: available when SMP is set.

  + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.

  + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.

  + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
	and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.

The check for the sparc64 variant is more complicated because
HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific
and sparc64 specific variant. Therefore it is automatically
selected with HAVE_HARDLOCKUP_DETECTOR_ARCH.

This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH.
It reduces the size of some checks but it makes them harder to follow.

Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH
is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global
HARDLOCKUP_DETECTOR switch is enabled/disabled.

Make the logic more straightforward by the following changes:

  + Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and
    HAVE_NMI_WATCHDOG in comments.

  + Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate
    HAVE_* for all four hardlockup detector variants.

    Use it in the other conditions instead of SMP. It makes it
    clear that it is about the buddy detector.

  + Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR
    and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand
    the conditions between the four hardlockup detector variants.

  + Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY
    can be enabled. It explains the dependency on the other
    hardlockup detector variants.

    Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply".
    It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when
    the global HARDLOCKUP_DETECTOR switch is changed.

  + Add dependency on HARDLOCKUP_DETECTOR so that the affected variables
    disappear when the hardlockup detectors are disabled.

    Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
    value is not preserved when the global switch is disabled.
    The user has to make the decision again when it gets re-enabled.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 arch/Kconfig      | 23 +++++++++++++-----
 lib/Kconfig.debug | 62 +++++++++++++++++++++++++++--------------------
 2 files changed, 53 insertions(+), 32 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 422f0ffa269e..77e5af5fda3f 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -404,17 +404,28 @@ config HAVE_NMI_WATCHDOG
 	depends on HAVE_NMI
 	bool
 	help
-	  The arch provides a low level NMI watchdog. It provides
-	  asm/nmi.h, and defines its own watchdog_hardlockup_probe() and
-	  arch_touch_nmi_watchdog().
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
+
+	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
+	  It is the last arch-specific implementation which was developed before
+	  adding the common infrastructure for handling hardlockup detectors.
+	  It is always built. It does _not_ use the common command line
+	  parameters and sysctl interface, except for
+	  /proc/sys/kernel/nmi_watchdog.
 
 config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
 	select HAVE_NMI_WATCHDOG
 	help
-	  The arch chooses to provide its own hardlockup detector, which is
-	  a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
-	  interfaces and parameters provided by hardlockup detector subsystem.
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
+
+	  It uses the same command line parameters, and sysctl interface,
+	  as the generic hardlockup detectors.
+
+	  HAVE_NMI_WATCHDOG is selected to build the code shared with
+	  the sparc64 specific implementation.
 
 config HAVE_PERF_REGS
 	bool
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 3e91fa33c7a0..a0b0c4decb89 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1035,16 +1035,33 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 	  Say N if unsure.
 
+config HAVE_HARDLOCKUP_DETECTOR_BUDDY
+	bool
+	depends on SMP
+	default y
+
 #
-# arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
-# lockup detector rather than the perf based detector.
+# Global switch whether to build a hardlockup detector at all. It is available
+# only when the architecture supports at least one implementation. There are
+# two exceptions. The hardlockup detector is never enabled on:
+#
+#	s390: it reported many false positives there
+#
+#	sparc64: has a custom implementation which is not using the common
+#		hardlockup command line options and sysctl interface.
+#
+# Note that HAVE_NMI_WATCHDOG is used to distinguish the sparc64 specific
+# implementaion. It is automatically enabled also for other arch-specific
+# variants which set HAVE_HARDLOCKUP_DETECTOR_ARCH. It makes the check
+# of avaialable and supported variants quite tricky.
 #
 config HARDLOCKUP_DETECTOR
 	bool "Detect Hard Lockups"
 	depends on DEBUG_KERNEL && !S390
-	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH || HAVE_HARDLOCKUP_DETECTOR_ARCH
+	depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
+	imply HARDLOCKUP_DETECTOR_PERF
+	imply HARDLOCKUP_DETECTOR_BUDDY
 	select LOCKUP_DETECTOR
-	select HARDLOCKUP_DETECTOR_NON_ARCH if HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
 
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
@@ -1055,9 +1072,14 @@ config HARDLOCKUP_DETECTOR
 	  chance to run.  The current stack trace is displayed upon detection
 	  and the system will stay locked up.
 
+#
+# Note that arch-specific variants are always preferred.
+#
 config HARDLOCKUP_DETECTOR_PREFER_BUDDY
 	bool "Prefer the buddy CPU hardlockup detector"
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
+	depends on !HAVE_NMI_WATCHDOG
 	help
 	  Say Y here to prefer the buddy hardlockup detector over the perf one.
 
@@ -1071,39 +1093,27 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
 
 config HARDLOCKUP_DETECTOR_PERF
 	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	depends on !HAVE_NMI_WATCHDOG
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 
 config HARDLOCKUP_DETECTOR_BUDDY
 	bool
-	depends on SMP
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY
+	depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	depends on !HAVE_NMI_WATCHDOG
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 
+#
 # Both the "perf" and "buddy" hardlockup detectors count hrtimer
 # interrupts. This config enables functions managing this common code.
+#
 config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 	bool
 	select SOFTLOCKUP_DETECTOR
 
-# For hardlockup detectors you can have one directly provided by the arch
-# or use a "non-arch" one. If you're using a "non-arch" one that is
-# further divided the perf hardlockup detector (which, confusingly, needs
-# arch-provided perf support) and the buddy hardlockup detector (which just
-# needs SMP). In either case, using the "non-arch" code conflicts with
-# the NMI watchdog code (which is sometimes used directly and sometimes used
-# by the arch-provided hardlockup detector).
-config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
-	default y
-
-# This will select the appropriate non-arch hardlockdup detector
-config HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
-
 #
 # Enables a timestamp based low pass filter to compensate for perf based
 # hard lockup detection which runs too fast due to turbo modes.
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 2/6] watchdog/hardlockup: Make the config checks more straightforward
@ 2023-06-16 15:06   ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

There are four possible variants of hardlockup detectors:

  + buddy: available when SMP is set.

  + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.

  + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.

  + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
	and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.

The check for the sparc64 variant is more complicated because
HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific
and sparc64 specific variant. Therefore it is automatically
selected with HAVE_HARDLOCKUP_DETECTOR_ARCH.

This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH.
It reduces the size of some checks but it makes them harder to follow.

Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH
is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global
HARDLOCKUP_DETECTOR switch is enabled/disabled.

Make the logic more straightforward by the following changes:

  + Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and
    HAVE_NMI_WATCHDOG in comments.

  + Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate
    HAVE_* for all four hardlockup detector variants.

    Use it in the other conditions instead of SMP. It makes it
    clear that it is about the buddy detector.

  + Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR
    and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand
    the conditions between the four hardlockup detector variants.

  + Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY
    can be enabled. It explains the dependency on the other
    hardlockup detector variants.

    Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply".
    It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when
    the global HARDLOCKUP_DETECTOR switch is changed.

  + Add dependency on HARDLOCKUP_DETECTOR so that the affected variables
    disappear when the hardlockup detectors are disabled.

    Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
    value is not preserved when the global switch is disabled.
    The user has to make the decision again when it gets re-enabled.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 arch/Kconfig      | 23 +++++++++++++-----
 lib/Kconfig.debug | 62 +++++++++++++++++++++++++++--------------------
 2 files changed, 53 insertions(+), 32 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 422f0ffa269e..77e5af5fda3f 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -404,17 +404,28 @@ config HAVE_NMI_WATCHDOG
 	depends on HAVE_NMI
 	bool
 	help
-	  The arch provides a low level NMI watchdog. It provides
-	  asm/nmi.h, and defines its own watchdog_hardlockup_probe() and
-	  arch_touch_nmi_watchdog().
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
+
+	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
+	  It is the last arch-specific implementation which was developed before
+	  adding the common infrastructure for handling hardlockup detectors.
+	  It is always built. It does _not_ use the common command line
+	  parameters and sysctl interface, except for
+	  /proc/sys/kernel/nmi_watchdog.
 
 config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
 	select HAVE_NMI_WATCHDOG
 	help
-	  The arch chooses to provide its own hardlockup detector, which is
-	  a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
-	  interfaces and parameters provided by hardlockup detector subsystem.
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
+
+	  It uses the same command line parameters, and sysctl interface,
+	  as the generic hardlockup detectors.
+
+	  HAVE_NMI_WATCHDOG is selected to build the code shared with
+	  the sparc64 specific implementation.
 
 config HAVE_PERF_REGS
 	bool
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 3e91fa33c7a0..a0b0c4decb89 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1035,16 +1035,33 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 	  Say N if unsure.
 
+config HAVE_HARDLOCKUP_DETECTOR_BUDDY
+	bool
+	depends on SMP
+	default y
+
 #
-# arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
-# lockup detector rather than the perf based detector.
+# Global switch whether to build a hardlockup detector at all. It is available
+# only when the architecture supports at least one implementation. There are
+# two exceptions. The hardlockup detector is never enabled on:
+#
+#	s390: it reported many false positives there
+#
+#	sparc64: has a custom implementation which is not using the common
+#		hardlockup command line options and sysctl interface.
+#
+# Note that HAVE_NMI_WATCHDOG is used to distinguish the sparc64 specific
+# implementaion. It is automatically enabled also for other arch-specific
+# variants which set HAVE_HARDLOCKUP_DETECTOR_ARCH. It makes the check
+# of avaialable and supported variants quite tricky.
 #
 config HARDLOCKUP_DETECTOR
 	bool "Detect Hard Lockups"
 	depends on DEBUG_KERNEL && !S390
-	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH || HAVE_HARDLOCKUP_DETECTOR_ARCH
+	depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
+	imply HARDLOCKUP_DETECTOR_PERF
+	imply HARDLOCKUP_DETECTOR_BUDDY
 	select LOCKUP_DETECTOR
-	select HARDLOCKUP_DETECTOR_NON_ARCH if HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
 
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
@@ -1055,9 +1072,14 @@ config HARDLOCKUP_DETECTOR
 	  chance to run.  The current stack trace is displayed upon detection
 	  and the system will stay locked up.
 
+#
+# Note that arch-specific variants are always preferred.
+#
 config HARDLOCKUP_DETECTOR_PREFER_BUDDY
 	bool "Prefer the buddy CPU hardlockup detector"
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
+	depends on !HAVE_NMI_WATCHDOG
 	help
 	  Say Y here to prefer the buddy hardlockup detector over the perf one.
 
@@ -1071,39 +1093,27 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
 
 config HARDLOCKUP_DETECTOR_PERF
 	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_PERF
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	depends on !HAVE_NMI_WATCHDOG
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 
 config HARDLOCKUP_DETECTOR_BUDDY
 	bool
-	depends on SMP
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY
+	depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
+	depends on !HAVE_NMI_WATCHDOG
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 
+#
 # Both the "perf" and "buddy" hardlockup detectors count hrtimer
 # interrupts. This config enables functions managing this common code.
+#
 config HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 	bool
 	select SOFTLOCKUP_DETECTOR
 
-# For hardlockup detectors you can have one directly provided by the arch
-# or use a "non-arch" one. If you're using a "non-arch" one that is
-# further divided the perf hardlockup detector (which, confusingly, needs
-# arch-provided perf support) and the buddy hardlockup detector (which just
-# needs SMP). In either case, using the "non-arch" code conflicts with
-# the NMI watchdog code (which is sometimes used directly and sometimes used
-# by the arch-provided hardlockup detector).
-config HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on (HAVE_HARDLOCKUP_DETECTOR_PERF || SMP) && !HAVE_NMI_WATCHDOG
-	default y
-
-# This will select the appropriate non-arch hardlockdup detector
-config HARDLOCKUP_DETECTOR_NON_ARCH
-	bool
-	depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
-	select HARDLOCKUP_DETECTOR_BUDDY if !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
-
 #
 # Enables a timestamp based low pass filter to compensate for perf based
 # hard lockup detection which runs too fast due to turbo modes.
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 3/6] watchdog/hardlockup: Declare arch_touch_nmi_watchdog() only in linux/nmi.h
  2023-06-16 15:06 ` Petr Mladek
@ 2023-06-16 15:06   ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users, Petr Mladek

arch_touch_nmi_watchdog() needs a different implementation for various
hardlockup detector implementations. And it does nothing when
any hardlockup detector is not built at all.

arch_touch_nmi_watchdog() is declared via linux/nmi.h. And it must be
defined as an empty function when there is no hardlockup detector.
It is done directly in this header file for the perf and buddy detectors.
And it is done in the included asm/linux.h for arch specific detectors.

The reason probably is that the arch specific variants build the code
using another conditions. For example, powerpc64/sparc64 builds the code
when CONFIG_PPC_WATCHDOG is enabled.

Another reason might be that these architectures define more functions
in asm/nmi.h anyway.

However the generic code actually knows when the function will be
implemented. It happens when some full featured or the sparc64-specific
hardlockup detector is built.

In particular, CONFIG_HARDLOCKUP_DETECTOR can be enabled only when
a generic or arch-specific full featured hardlockup detector is available.
The only exception is sparc64 which can be built even when the global
HARDLOCKUP_DETECTOR switch is disabled.

The information about sparc64 is a bit complicated. The hardlockup
detector is built there when CONFIG_HAVE_NMI_WATCHDOG is set and
CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.

People might wonder whether this change really makes things easier.
The motivation is:

  + The current logic in linux/nmi.h is far from obvious.
    For example, arch_touch_nmi_watchdog() is defined as {} when
    neither CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER nor
    CONFIG_HAVE_NMI_WATCHDOG is defined.

  + The change synchronizes the checks in lib/Kconfig.debug and
    in the generic code.

  + It is a step that will help cleaning HAVE_NMI_WATCHDOG related
    checks.

The change should not change the existing behavior.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/powerpc/include/asm/nmi.h |  2 --
 arch/sparc/include/asm/nmi.h   |  1 -
 include/linux/nmi.h            | 13 ++++++++++---
 3 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h
index 43bfd4de868f..ce25318c3902 100644
--- a/arch/powerpc/include/asm/nmi.h
+++ b/arch/powerpc/include/asm/nmi.h
@@ -3,11 +3,9 @@
 #define _ASM_NMI_H

 #ifdef CONFIG_PPC_WATCHDOG
-extern void arch_touch_nmi_watchdog(void);
 long soft_nmi_interrupt(struct pt_regs *regs);
 void watchdog_hardlockup_set_timeout_pct(u64 pct);
 #else
-static inline void arch_touch_nmi_watchdog(void) {}
 static inline void watchdog_hardlockup_set_timeout_pct(u64 pct) {}
 #endif

diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index 90ee7863d9fe..920dc23f443f 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -8,7 +8,6 @@ void nmi_adjust_hz(unsigned int new_hz);

 extern atomic_t nmi_active;

-void arch_touch_nmi_watchdog(void);
 void start_nmi_watchdog(void *unused);
 void stop_nmi_watchdog(void *unused);

diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index b5d0b7ab52fb..b9e816bde14a 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -7,6 +7,8 @@

 #include <linux/sched.h>
 #include <asm/irq.h>
+
+/* Arch specific watchdogs might need to share extra watchdog-related APIs. */
 #if defined(CONFIG_HAVE_NMI_WATCHDOG)
 #include <asm/nmi.h>
 #endif
@@ -89,12 +91,17 @@ extern unsigned int hardlockup_panic;
 static inline void hardlockup_detector_disable(void) {}
 #endif

-#if defined(CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER)
+/* Sparc64 has special implemetantion that is always enabled. */
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || \
+    (defined(CONFIG_HAVE_NMI_WATCHDOG) && !defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH))
 void arch_touch_nmi_watchdog(void);
+#else
+static inline void arch_touch_nmi_watchdog(void) { }
+#endif
+
+#if defined(CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER)
 void watchdog_hardlockup_touch_cpu(unsigned int cpu);
 void watchdog_hardlockup_check(unsigned int cpu, struct pt_regs *regs);
-#elif !defined(CONFIG_HAVE_NMI_WATCHDOG)
-static inline void arch_touch_nmi_watchdog(void) { }
 #endif

 #if defined(CONFIG_HARDLOCKUP_DETECTOR_PERF)
-- 
2.35.3

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 3/6] watchdog/hardlockup: Declare arch_touch_nmi_watchdog() only in linux/nmi.h
@ 2023-06-16 15:06   ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

arch_touch_nmi_watchdog() needs a different implementation for various
hardlockup detector implementations. And it does nothing when
any hardlockup detector is not built at all.

arch_touch_nmi_watchdog() is declared via linux/nmi.h. And it must be
defined as an empty function when there is no hardlockup detector.
It is done directly in this header file for the perf and buddy detectors.
And it is done in the included asm/linux.h for arch specific detectors.

The reason probably is that the arch specific variants build the code
using another conditions. For example, powerpc64/sparc64 builds the code
when CONFIG_PPC_WATCHDOG is enabled.

Another reason might be that these architectures define more functions
in asm/nmi.h anyway.

However the generic code actually knows when the function will be
implemented. It happens when some full featured or the sparc64-specific
hardlockup detector is built.

In particular, CONFIG_HARDLOCKUP_DETECTOR can be enabled only when
a generic or arch-specific full featured hardlockup detector is available.
The only exception is sparc64 which can be built even when the global
HARDLOCKUP_DETECTOR switch is disabled.

The information about sparc64 is a bit complicated. The hardlockup
detector is built there when CONFIG_HAVE_NMI_WATCHDOG is set and
CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.

People might wonder whether this change really makes things easier.
The motivation is:

  + The current logic in linux/nmi.h is far from obvious.
    For example, arch_touch_nmi_watchdog() is defined as {} when
    neither CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER nor
    CONFIG_HAVE_NMI_WATCHDOG is defined.

  + The change synchronizes the checks in lib/Kconfig.debug and
    in the generic code.

  + It is a step that will help cleaning HAVE_NMI_WATCHDOG related
    checks.

The change should not change the existing behavior.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/powerpc/include/asm/nmi.h |  2 --
 arch/sparc/include/asm/nmi.h   |  1 -
 include/linux/nmi.h            | 13 ++++++++++---
 3 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h
index 43bfd4de868f..ce25318c3902 100644
--- a/arch/powerpc/include/asm/nmi.h
+++ b/arch/powerpc/include/asm/nmi.h
@@ -3,11 +3,9 @@
 #define _ASM_NMI_H

 #ifdef CONFIG_PPC_WATCHDOG
-extern void arch_touch_nmi_watchdog(void);
 long soft_nmi_interrupt(struct pt_regs *regs);
 void watchdog_hardlockup_set_timeout_pct(u64 pct);
 #else
-static inline void arch_touch_nmi_watchdog(void) {}
 static inline void watchdog_hardlockup_set_timeout_pct(u64 pct) {}
 #endif

diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index 90ee7863d9fe..920dc23f443f 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -8,7 +8,6 @@ void nmi_adjust_hz(unsigned int new_hz);

 extern atomic_t nmi_active;

-void arch_touch_nmi_watchdog(void);
 void start_nmi_watchdog(void *unused);
 void stop_nmi_watchdog(void *unused);

diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index b5d0b7ab52fb..b9e816bde14a 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -7,6 +7,8 @@

 #include <linux/sched.h>
 #include <asm/irq.h>
+
+/* Arch specific watchdogs might need to share extra watchdog-related APIs. */
 #if defined(CONFIG_HAVE_NMI_WATCHDOG)
 #include <asm/nmi.h>
 #endif
@@ -89,12 +91,17 @@ extern unsigned int hardlockup_panic;
 static inline void hardlockup_detector_disable(void) {}
 #endif

-#if defined(CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER)
+/* Sparc64 has special implemetantion that is always enabled. */
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || \
+    (defined(CONFIG_HAVE_NMI_WATCHDOG) && !defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH))
 void arch_touch_nmi_watchdog(void);
+#else
+static inline void arch_touch_nmi_watchdog(void) { }
+#endif
+
+#if defined(CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER)
 void watchdog_hardlockup_touch_cpu(unsigned int cpu);
 void watchdog_hardlockup_check(unsigned int cpu, struct pt_regs *regs);
-#elif !defined(CONFIG_HAVE_NMI_WATCHDOG)
-static inline void arch_touch_nmi_watchdog(void) { }
 #endif

 #if defined(CONFIG_HARDLOCKUP_DETECTOR_PERF)
-- 
2.35.3

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 4/6] watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG sparc64-specific
  2023-06-16 15:06 ` Petr Mladek
@ 2023-06-16 15:06   ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users, Petr Mladek

There are several hardlockup detector implementations and several Kconfig
values which allow selection and build of the preferred one.

CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb
("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
It was a preparation step for introducing the new generic perf hardlockup
detector.

The existing arch-specific variants did not support the to-be-created
generic build configurations, sysctl interface, etc. This distinction
was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog:
Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
in v2.6.38.

CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105
("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
by three architectures, namely blackfin, mn10300, and sparc.

The support for blackfin and mn10300 architectures has been completely
dropped some time ago. And sparc is the only architecture with the historic
NMI watchdog at the moment.

And the old sparc implementation is really special. It is always built on
sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b
("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
in v4.10-rc1.

There are only few locations where the sparc64 NMI watchdog interacts
with the generic hardlockup detectors code:

  + implements arch_touch_nmi_watchdog() which is called from the generic
    touch_nmi_watchdog()

  + implements watchdog_hardlockup_enable()/disable() to support
    /proc/sys/kernel/nmi_watchdog

  + is always preferred over other generic watchdogs, see
    CONFIG_HARDLOCKUP_DETECTOR

  + includes asm/nmi.h into linux/nmi.h because some sparc-specific
    functions are needed in sparc-specific code which includes
    only linux/nmi.h.

The situation became more complicated after the commit 05a4a95279311c3
("kernel/watchdog: split up config options") and commit 2104180a53698df5
("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
specific hardlockup detector. It was compatible with the perf one
regarding the general boot, sysctl, and programming interfaces.

HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
detectors had some common requirements, namely:

  + implemented arch_touch_nmi_watchdog()
  + included asm/nmi.h into linux/nmi.h
  + defined the default value for /proc/sys/kernel/nmi_watchdog

But it actually has made things pretty complicated when the generic
buddy hardlockup detector was added. Before the generic perf detector
was newer supported together with an arch-specific one. But the buddy
detector could work on any SMP system. It means that an architecture
could support both the arch-specific and buddy detector.

As a result, there are few tricky dependencies. For example,
CONFIG_HARDLOCKUP_DETECTOR depends on:

  ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH

The problem is that the very special sparc implementation is defined as:

  HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH

Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
without reading understanding the history.

Make the logic less tricky and more self-explanatory by making
HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
HAVE_HARDLOCKUP_DETECTOR_SPARC64.

Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
and it is not longer enabled when HAVE_NMI_WATCHDOG is set.

Signed-off-by: Petr Mladek <pmladek@suse.com>

watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64

The configuration variable HAVE_NMI_WATCHDOG has a generic name but
it is selected only for SPARC64.

It should _not_ be used in general because it is not integrated with
the other hardlockup detectors. Namely, it does not support the hardlockup
specific command line parameters and systcl interface. Instead, it is
enabled/disabled together with the softlockup detector by the global
"watchdog" sysctl.

Rename it to HAVE_HARDLOCKUP_WATCHDOG_SPARC64 to make the special
behavior more clear.

Also the variable is set only on sparc64. Move the definition
from arch/Kconfig to arch/sparc/Kconfig.debug.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 arch/Kconfig             | 18 ------------------
 arch/sparc/Kconfig       |  2 +-
 arch/sparc/Kconfig.debug |  9 +++++++++
 include/linux/nmi.h      |  5 ++---
 kernel/watchdog.c        |  2 +-
 lib/Kconfig.debug        | 15 +++++----------
 6 files changed, 18 insertions(+), 33 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 77e5af5fda3f..6517e5477459 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -400,23 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
 	  The arch chooses to use the generic perf-NMI-based hardlockup
 	  detector. Must define HAVE_PERF_EVENTS_NMI.

-config HAVE_NMI_WATCHDOG
-	depends on HAVE_NMI
-	bool
-	help
-	  The arch provides its own hardlockup detector implementation instead
-	  of the generic ones.
-
-	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
-	  It is the last arch-specific implementation which was developed before
-	  adding the common infrastructure for handling hardlockup detectors.
-	  It is always built. It does _not_ use the common command line
-	  parameters and sysctl interface, except for
-	  /proc/sys/kernel/nmi_watchdog.
-
 config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
-	select HAVE_NMI_WATCHDOG
 	help
 	  The arch provides its own hardlockup detector implementation instead
 	  of the generic ones.
@@ -424,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	  It uses the same command line parameters, and sysctl interface,
 	  as the generic hardlockup detectors.

-	  HAVE_NMI_WATCHDOG is selected to build the code shared with
-	  the sparc64 specific implementation.
-
 config HAVE_PERF_REGS
 	bool
 	help
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 8535e19062f6..7297f69635cb 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -33,7 +33,7 @@ config SPARC
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_PCI_IOMAP
 	select HAS_IOPORT
-	select HAVE_NMI_WATCHDOG if SPARC64
+	select HAVE_HARDLOCKUP_DETECTOR_SPARC64 if SPARC64
 	select HAVE_CBPF_JIT if SPARC32
 	select HAVE_EBPF_JIT if SPARC64
 	select HAVE_DEBUG_BUGVERBOSE
diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 6b2bec1888b3..4903b6847e43 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -14,3 +14,12 @@ config FRAME_POINTER
 	bool
 	depends on MCOUNT
 	default y
+
+config HAVE_HARDLOCKUP_DETECTOR_SPARC64
+	depends on HAVE_NMI
+	bool
+	help
+	  Sparc64 hardlockup detector is the last one developed before adding
+	  the common infrastructure for handling hardlockup detectors. It is
+	  always built. It does _not_ use the common command line parameters
+	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index b9e816bde14a..7ee6c35d1f05 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -9,7 +9,7 @@
 #include <asm/irq.h>

 /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
-#if defined(CONFIG_HAVE_NMI_WATCHDOG)
+#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
 #include <asm/nmi.h>
 #endif

@@ -92,8 +92,7 @@ static inline void hardlockup_detector_disable(void) {}
 #endif

 /* Sparc64 has special implemetantion that is always enabled. */
-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || \
-    (defined(CONFIG_HAVE_NMI_WATCHDOG) && !defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH))
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
 void arch_touch_nmi_watchdog(void);
 #else
 static inline void arch_touch_nmi_watchdog(void) { }
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 437c198933cf..babd2f3c8b72 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -29,7 +29,7 @@

 static DEFINE_MUTEX(watchdog_mutex);

-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_NMI_WATCHDOG)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
 # define WATCHDOG_HARDLOCKUP_DEFAULT	1
 #else
 # define WATCHDOG_HARDLOCKUP_DEFAULT	0
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index a0b0c4decb89..e94664339e28 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1050,15 +1050,10 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
 #	sparc64: has a custom implementation which is not using the common
 #		hardlockup command line options and sysctl interface.
 #
-# Note that HAVE_NMI_WATCHDOG is used to distinguish the sparc64 specific
-# implementaion. It is automatically enabled also for other arch-specific
-# variants which set HAVE_HARDLOCKUP_DETECTOR_ARCH. It makes the check
-# of avaialable and supported variants quite tricky.
-#
 config HARDLOCKUP_DETECTOR
 	bool "Detect Hard Lockups"
-	depends on DEBUG_KERNEL && !S390
-	depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
+	depends on DEBUG_KERNEL && !S390 && !HAVE_HARDLOCKUP_DETECTOR_SPARC64
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	imply HARDLOCKUP_DETECTOR_PERF
 	imply HARDLOCKUP_DETECTOR_BUDDY
 	select LOCKUP_DETECTOR
@@ -1079,7 +1074,7 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
 	bool "Prefer the buddy CPU hardlockup detector"
 	depends on HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
-	depends on !HAVE_NMI_WATCHDOG
+	depends on !HAVE_HARLOCKUP_DETECTOR_ARCH
 	help
 	  Say Y here to prefer the buddy hardlockup detector over the perf one.

@@ -1095,7 +1090,7 @@ config HARDLOCKUP_DETECTOR_PERF
 	bool
 	depends on HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	depends on !HAVE_NMI_WATCHDOG
+	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER

 config HARDLOCKUP_DETECTOR_BUDDY
@@ -1103,7 +1098,7 @@ config HARDLOCKUP_DETECTOR_BUDDY
 	depends on HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY
 	depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	depends on !HAVE_NMI_WATCHDOG
+	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER

 #
-- 
2.35.3

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 4/6] watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG sparc64-specific
@ 2023-06-16 15:06   ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

There are several hardlockup detector implementations and several Kconfig
values which allow selection and build of the preferred one.

CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb
("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
It was a preparation step for introducing the new generic perf hardlockup
detector.

The existing arch-specific variants did not support the to-be-created
generic build configurations, sysctl interface, etc. This distinction
was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog:
Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
in v2.6.38.

CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105
("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
by three architectures, namely blackfin, mn10300, and sparc.

The support for blackfin and mn10300 architectures has been completely
dropped some time ago. And sparc is the only architecture with the historic
NMI watchdog at the moment.

And the old sparc implementation is really special. It is always built on
sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b
("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
in v4.10-rc1.

There are only few locations where the sparc64 NMI watchdog interacts
with the generic hardlockup detectors code:

  + implements arch_touch_nmi_watchdog() which is called from the generic
    touch_nmi_watchdog()

  + implements watchdog_hardlockup_enable()/disable() to support
    /proc/sys/kernel/nmi_watchdog

  + is always preferred over other generic watchdogs, see
    CONFIG_HARDLOCKUP_DETECTOR

  + includes asm/nmi.h into linux/nmi.h because some sparc-specific
    functions are needed in sparc-specific code which includes
    only linux/nmi.h.

The situation became more complicated after the commit 05a4a95279311c3
("kernel/watchdog: split up config options") and commit 2104180a53698df5
("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
specific hardlockup detector. It was compatible with the perf one
regarding the general boot, sysctl, and programming interfaces.

HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
detectors had some common requirements, namely:

  + implemented arch_touch_nmi_watchdog()
  + included asm/nmi.h into linux/nmi.h
  + defined the default value for /proc/sys/kernel/nmi_watchdog

But it actually has made things pretty complicated when the generic
buddy hardlockup detector was added. Before the generic perf detector
was newer supported together with an arch-specific one. But the buddy
detector could work on any SMP system. It means that an architecture
could support both the arch-specific and buddy detector.

As a result, there are few tricky dependencies. For example,
CONFIG_HARDLOCKUP_DETECTOR depends on:

  ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH

The problem is that the very special sparc implementation is defined as:

  HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH

Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
without reading understanding the history.

Make the logic less tricky and more self-explanatory by making
HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
HAVE_HARDLOCKUP_DETECTOR_SPARC64.

Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
and it is not longer enabled when HAVE_NMI_WATCHDOG is set.

Signed-off-by: Petr Mladek <pmladek@suse.com>

watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64

The configuration variable HAVE_NMI_WATCHDOG has a generic name but
it is selected only for SPARC64.

It should _not_ be used in general because it is not integrated with
the other hardlockup detectors. Namely, it does not support the hardlockup
specific command line parameters and systcl interface. Instead, it is
enabled/disabled together with the softlockup detector by the global
"watchdog" sysctl.

Rename it to HAVE_HARDLOCKUP_WATCHDOG_SPARC64 to make the special
behavior more clear.

Also the variable is set only on sparc64. Move the definition
from arch/Kconfig to arch/sparc/Kconfig.debug.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 arch/Kconfig             | 18 ------------------
 arch/sparc/Kconfig       |  2 +-
 arch/sparc/Kconfig.debug |  9 +++++++++
 include/linux/nmi.h      |  5 ++---
 kernel/watchdog.c        |  2 +-
 lib/Kconfig.debug        | 15 +++++----------
 6 files changed, 18 insertions(+), 33 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 77e5af5fda3f..6517e5477459 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -400,23 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
 	  The arch chooses to use the generic perf-NMI-based hardlockup
 	  detector. Must define HAVE_PERF_EVENTS_NMI.

-config HAVE_NMI_WATCHDOG
-	depends on HAVE_NMI
-	bool
-	help
-	  The arch provides its own hardlockup detector implementation instead
-	  of the generic ones.
-
-	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
-	  It is the last arch-specific implementation which was developed before
-	  adding the common infrastructure for handling hardlockup detectors.
-	  It is always built. It does _not_ use the common command line
-	  parameters and sysctl interface, except for
-	  /proc/sys/kernel/nmi_watchdog.
-
 config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
-	select HAVE_NMI_WATCHDOG
 	help
 	  The arch provides its own hardlockup detector implementation instead
 	  of the generic ones.
@@ -424,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	  It uses the same command line parameters, and sysctl interface,
 	  as the generic hardlockup detectors.

-	  HAVE_NMI_WATCHDOG is selected to build the code shared with
-	  the sparc64 specific implementation.
-
 config HAVE_PERF_REGS
 	bool
 	help
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 8535e19062f6..7297f69635cb 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -33,7 +33,7 @@ config SPARC
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_PCI_IOMAP
 	select HAS_IOPORT
-	select HAVE_NMI_WATCHDOG if SPARC64
+	select HAVE_HARDLOCKUP_DETECTOR_SPARC64 if SPARC64
 	select HAVE_CBPF_JIT if SPARC32
 	select HAVE_EBPF_JIT if SPARC64
 	select HAVE_DEBUG_BUGVERBOSE
diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 6b2bec1888b3..4903b6847e43 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -14,3 +14,12 @@ config FRAME_POINTER
 	bool
 	depends on MCOUNT
 	default y
+
+config HAVE_HARDLOCKUP_DETECTOR_SPARC64
+	depends on HAVE_NMI
+	bool
+	help
+	  Sparc64 hardlockup detector is the last one developed before adding
+	  the common infrastructure for handling hardlockup detectors. It is
+	  always built. It does _not_ use the common command line parameters
+	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index b9e816bde14a..7ee6c35d1f05 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -9,7 +9,7 @@
 #include <asm/irq.h>

 /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
-#if defined(CONFIG_HAVE_NMI_WATCHDOG)
+#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
 #include <asm/nmi.h>
 #endif

@@ -92,8 +92,7 @@ static inline void hardlockup_detector_disable(void) {}
 #endif

 /* Sparc64 has special implemetantion that is always enabled. */
-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || \
-    (defined(CONFIG_HAVE_NMI_WATCHDOG) && !defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH))
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
 void arch_touch_nmi_watchdog(void);
 #else
 static inline void arch_touch_nmi_watchdog(void) { }
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 437c198933cf..babd2f3c8b72 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -29,7 +29,7 @@

 static DEFINE_MUTEX(watchdog_mutex);

-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_NMI_WATCHDOG)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
 # define WATCHDOG_HARDLOCKUP_DEFAULT	1
 #else
 # define WATCHDOG_HARDLOCKUP_DEFAULT	0
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index a0b0c4decb89..e94664339e28 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1050,15 +1050,10 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
 #	sparc64: has a custom implementation which is not using the common
 #		hardlockup command line options and sysctl interface.
 #
-# Note that HAVE_NMI_WATCHDOG is used to distinguish the sparc64 specific
-# implementaion. It is automatically enabled also for other arch-specific
-# variants which set HAVE_HARDLOCKUP_DETECTOR_ARCH. It makes the check
-# of avaialable and supported variants quite tricky.
-#
 config HARDLOCKUP_DETECTOR
 	bool "Detect Hard Lockups"
-	depends on DEBUG_KERNEL && !S390
-	depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
+	depends on DEBUG_KERNEL && !S390 && !HAVE_HARDLOCKUP_DETECTOR_SPARC64
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	imply HARDLOCKUP_DETECTOR_PERF
 	imply HARDLOCKUP_DETECTOR_BUDDY
 	select LOCKUP_DETECTOR
@@ -1079,7 +1074,7 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
 	bool "Prefer the buddy CPU hardlockup detector"
 	depends on HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
-	depends on !HAVE_NMI_WATCHDOG
+	depends on !HAVE_HARLOCKUP_DETECTOR_ARCH
 	help
 	  Say Y here to prefer the buddy hardlockup detector over the perf one.

@@ -1095,7 +1090,7 @@ config HARDLOCKUP_DETECTOR_PERF
 	bool
 	depends on HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	depends on !HAVE_NMI_WATCHDOG
+	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER

 config HARDLOCKUP_DETECTOR_BUDDY
@@ -1103,7 +1098,7 @@ config HARDLOCKUP_DETECTOR_BUDDY
 	depends on HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY
 	depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
-	depends on !HAVE_NMI_WATCHDOG
+	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER

 #
-- 
2.35.3

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 5/6] watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
  2023-06-16 15:06 ` Petr Mladek
@ 2023-06-16 15:06   ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users, Petr Mladek

The HAVE_ prefix means that the code could be enabled. Add another
variable for HAVE_HARDLOCKUP_DETECTOR_SPARC64 without this prefix.
It will be set when it should be built. It will make it compatible
with the other hardlockup detectors.

Before, it is far from obvious that the SPARC64 variant is actually used:

$> make ARCH=sparc64 defconfig
$> grep HARDLOCKUP_DETECTOR .config
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y

After, it is more clear:

$> make ARCH=sparc64 defconfig
$> grep HARDLOCKUP_DETECTOR .config
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y
CONFIG_HARDLOCKUP_DETECTOR_SPARC64=y

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/sparc/Kconfig.debug | 7 ++++++-
 include/linux/nmi.h      | 4 ++--
 kernel/watchdog.c        | 2 +-
 lib/Kconfig.debug        | 2 +-
 4 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 4903b6847e43..37e003665de6 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -16,10 +16,15 @@ config FRAME_POINTER
 	default y
 
 config HAVE_HARDLOCKUP_DETECTOR_SPARC64
-	depends on HAVE_NMI
 	bool
+	depends on HAVE_NMI
+	select HARDLOCKUP_DETECTOR_SPARC64
 	help
 	  Sparc64 hardlockup detector is the last one developed before adding
 	  the common infrastructure for handling hardlockup detectors. It is
 	  always built. It does _not_ use the common command line parameters
 	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
+
+config HARDLOCKUP_DETECTOR_SPARC64
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_SPARC64
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 7ee6c35d1f05..515d6724f469 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -9,7 +9,7 @@
 #include <asm/irq.h>
 
 /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
-#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 #include <asm/nmi.h>
 #endif
 
@@ -92,7 +92,7 @@ static inline void hardlockup_detector_disable(void) {}
 #endif
 
 /* Sparc64 has special implemetantion that is always enabled. */
-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 void arch_touch_nmi_watchdog(void);
 #else
 static inline void arch_touch_nmi_watchdog(void) { }
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index babd2f3c8b72..a2154e753cb4 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -29,7 +29,7 @@
 
 static DEFINE_MUTEX(watchdog_mutex);
 
-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 # define WATCHDOG_HARDLOCKUP_DEFAULT	1
 #else
 # define WATCHDOG_HARDLOCKUP_DEFAULT	0
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e94664339e28..f285e9cf967a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1052,7 +1052,7 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
 #
 config HARDLOCKUP_DETECTOR
 	bool "Detect Hard Lockups"
-	depends on DEBUG_KERNEL && !S390 && !HAVE_HARDLOCKUP_DETECTOR_SPARC64
+	depends on DEBUG_KERNEL && !S390 && !HARDLOCKUP_DETECTOR_SPARC64
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	imply HARDLOCKUP_DETECTOR_PERF
 	imply HARDLOCKUP_DETECTOR_BUDDY
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 5/6] watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
@ 2023-06-16 15:06   ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

The HAVE_ prefix means that the code could be enabled. Add another
variable for HAVE_HARDLOCKUP_DETECTOR_SPARC64 without this prefix.
It will be set when it should be built. It will make it compatible
with the other hardlockup detectors.

Before, it is far from obvious that the SPARC64 variant is actually used:

$> make ARCH=sparc64 defconfig
$> grep HARDLOCKUP_DETECTOR .config
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y

After, it is more clear:

$> make ARCH=sparc64 defconfig
$> grep HARDLOCKUP_DETECTOR .config
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y
CONFIG_HARDLOCKUP_DETECTOR_SPARC64=y

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/sparc/Kconfig.debug | 7 ++++++-
 include/linux/nmi.h      | 4 ++--
 kernel/watchdog.c        | 2 +-
 lib/Kconfig.debug        | 2 +-
 4 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 4903b6847e43..37e003665de6 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -16,10 +16,15 @@ config FRAME_POINTER
 	default y
 
 config HAVE_HARDLOCKUP_DETECTOR_SPARC64
-	depends on HAVE_NMI
 	bool
+	depends on HAVE_NMI
+	select HARDLOCKUP_DETECTOR_SPARC64
 	help
 	  Sparc64 hardlockup detector is the last one developed before adding
 	  the common infrastructure for handling hardlockup detectors. It is
 	  always built. It does _not_ use the common command line parameters
 	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
+
+config HARDLOCKUP_DETECTOR_SPARC64
+	bool
+	depends on HAVE_HARDLOCKUP_DETECTOR_SPARC64
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 7ee6c35d1f05..515d6724f469 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -9,7 +9,7 @@
 #include <asm/irq.h>
 
 /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
-#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 #include <asm/nmi.h>
 #endif
 
@@ -92,7 +92,7 @@ static inline void hardlockup_detector_disable(void) {}
 #endif
 
 /* Sparc64 has special implemetantion that is always enabled. */
-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 void arch_touch_nmi_watchdog(void);
 #else
 static inline void arch_touch_nmi_watchdog(void) { }
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index babd2f3c8b72..a2154e753cb4 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -29,7 +29,7 @@
 
 static DEFINE_MUTEX(watchdog_mutex);
 
-#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 # define WATCHDOG_HARDLOCKUP_DEFAULT	1
 #else
 # define WATCHDOG_HARDLOCKUP_DEFAULT	0
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e94664339e28..f285e9cf967a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1052,7 +1052,7 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
 #
 config HARDLOCKUP_DETECTOR
 	bool "Detect Hard Lockups"
-	depends on DEBUG_KERNEL && !S390 && !HAVE_HARDLOCKUP_DETECTOR_SPARC64
+	depends on DEBUG_KERNEL && !S390 && !HARDLOCKUP_DETECTOR_SPARC64
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	imply HARDLOCKUP_DETECTOR_PERF
 	imply HARDLOCKUP_DETECTOR_BUDDY
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
  2023-06-16 15:06 ` Petr Mladek
@ 2023-06-16 15:06   ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users, Petr Mladek

The HAVE_ prefix means that the code could be enabled. Add another
variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
It will be set when it should be built. It will make it compatible
with the other hardlockup detectors.

The change allows to clean up dependencies of PPC_WATCHDOG
and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.

As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
on arm, x86, powerpc architectures.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/powerpc/Kconfig | 5 ++---
 include/linux/nmi.h  | 2 +-
 lib/Kconfig.debug    | 9 +++++++++
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 539d1f03ff42..987e730740d7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -90,8 +90,7 @@ config NMI_IPI
 
 config PPC_WATCHDOG
 	bool
-	depends on HARDLOCKUP_DETECTOR
-	depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
+	depends on HARDLOCKUP_DETECTOR_ARCH
 	default y
 	help
 	  This is a placeholder when the powerpc hardlockup detector
@@ -240,7 +239,7 @@ config PPC
 	select HAVE_GCC_PLUGINS			if GCC_VERSION >= 50200   # plugin support on gcc <= 5.1 is buggy on PPC
 	select HAVE_GENERIC_VDSO
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC_BOOK3S_64 && SMP
-	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
+	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 	select HAVE_HW_BREAKPOINT		if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_TIME_ACCOUNTING
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 515d6724f469..ec808ebd36ba 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -9,7 +9,7 @@
 #include <asm/irq.h>
 
 /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
-#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 #include <asm/nmi.h>
 #endif
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index f285e9cf967a..2c4bb72e72ad 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1056,6 +1056,7 @@ config HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	imply HARDLOCKUP_DETECTOR_PERF
 	imply HARDLOCKUP_DETECTOR_BUDDY
+	imply HARDLOCKUP_DETECTOR_ARCH
 	select LOCKUP_DETECTOR
 
 	help
@@ -1101,6 +1102,14 @@ config HARDLOCKUP_DETECTOR_BUDDY
 	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 
+config HARDLOCKUP_DETECTOR_ARCH
+	bool
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
+	help
+	  The arch-specific implementation of the hardlockup detector will
+	  be used.
+
 #
 # Both the "perf" and "buddy" hardlockup detectors count hrtimer
 # interrupts. This config enables functions managing this common code.
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
@ 2023-06-16 15:06   ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:06 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

The HAVE_ prefix means that the code could be enabled. Add another
variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
It will be set when it should be built. It will make it compatible
with the other hardlockup detectors.

The change allows to clean up dependencies of PPC_WATCHDOG
and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.

As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
on arm, x86, powerpc architectures.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/powerpc/Kconfig | 5 ++---
 include/linux/nmi.h  | 2 +-
 lib/Kconfig.debug    | 9 +++++++++
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 539d1f03ff42..987e730740d7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -90,8 +90,7 @@ config NMI_IPI
 
 config PPC_WATCHDOG
 	bool
-	depends on HARDLOCKUP_DETECTOR
-	depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
+	depends on HARDLOCKUP_DETECTOR_ARCH
 	default y
 	help
 	  This is a placeholder when the powerpc hardlockup detector
@@ -240,7 +239,7 @@ config PPC
 	select HAVE_GCC_PLUGINS			if GCC_VERSION >= 50200   # plugin support on gcc <= 5.1 is buggy on PPC
 	select HAVE_GENERIC_VDSO
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC_BOOK3S_64 && SMP
-	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
+	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 	select HAVE_HW_BREAKPOINT		if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_TIME_ACCOUNTING
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 515d6724f469..ec808ebd36ba 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -9,7 +9,7 @@
 #include <asm/irq.h>
 
 /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
-#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
 #include <asm/nmi.h>
 #endif
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index f285e9cf967a..2c4bb72e72ad 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1056,6 +1056,7 @@ config HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	imply HARDLOCKUP_DETECTOR_PERF
 	imply HARDLOCKUP_DETECTOR_BUDDY
+	imply HARDLOCKUP_DETECTOR_ARCH
 	select LOCKUP_DETECTOR
 
 	help
@@ -1101,6 +1102,14 @@ config HARDLOCKUP_DETECTOR_BUDDY
 	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
 
+config HARDLOCKUP_DETECTOR_ARCH
+	bool
+	depends on HARDLOCKUP_DETECTOR
+	depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
+	help
+	  The arch-specific implementation of the hardlockup detector will
+	  be used.
+
 #
 # Both the "perf" and "buddy" hardlockup detectors count hrtimer
 # interrupts. This config enables functions managing this common code.
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors
  2023-06-16 15:06 ` Petr Mladek
@ 2023-06-16 15:21   ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:21 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, Michael Ellerman,
	linuxppc-dev, Christophe Leroy, sparclinux, David S . Miller,
	linux-perf-users

On Fri 2023-06-16 17:06:12, Petr Mladek wrote:
> Hi,
> 
> this patchset is supposed to replace the last patch in the patchset cleaning
> up after introducing the buddy detector, see
> https://lore.kernel.org/r/20230526184139.10.I821fe7609e57608913fe05abd8f35b343e7a9aae@changeid
> 
> Changes against v1:
> 
>   + Better explained the C-like ordering in the 1st patch.
> 
>   + Squashed patches for splitting and renaming HAVE_NMI_WATCHDOG,
>     updated commit message with the history and more facts.
> 
>   + Updated comments about the sparc64 variant. It is not handled together
>     with the softlockup detector. In fact, it is always build. And it even
>     used to be always enabled until the commit 7a5c8b57cec93196b ("sparc:
>     implement watchdog_nmi_enable and watchdog_nmi_disable") added in
>     v4.10-rc1.
> 
>     I realized this when updating the comment for the 4th patch. My original
>     statement in v1 patchset was based on code reading. I looked at it from
>     a bad side.
> 
>   + Removed superfluous "default n"
>   + Fixed typos.

I sometimes find the diff between the two versions useful. Especially, when the
patches are not trivial and the last version made only cosmetic
changes.

This is what I got by comparing "git format-patch" generated patchsets:

diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0000-cover-letter.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0000-cover-letter.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0000-cover-letter.patch	2023-06-16 16:42:07.769941775 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0000-cover-letter.patch	2023-06-16 16:39:42.179877676 +0200
@@ -1,9 +1,33 @@
-From 0456ed568d98ba5bba8148e4f60d769e3c5a6c7a Mon Sep 17 00:00:00 2001
+From bcf4dfab5a64ee691eb5154b1361ed59610c9387 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
-Date: Fri, 16 Jun 2023 16:42:07 +0200
-Subject: [PATCH 0/6] *** SUBJECT HERE ***
+Date: Fri, 16 Jun 2023 16:28:13 +0200
+Subject: [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors
 
-*** BLURB HERE ***
+Hi,
+
+this patchset is supposed to replace the last patch in the patchset cleaning
+up after introducing the buddy detector, see
+https://lore.kernel.org/r/20230526184139.10.I821fe7609e57608913fe05abd8f35b343e7a9aae@changeid
+
+Changes against v1:
+
+  + Better explained the C-like ordering in the 1st patch.
+
+  + Squashed patches for splitting and renaming HAVE_NMI_WATCHDOG,
+    updated commit message with the history and more facts.
+
+  + Updated comments about the sparc64 variant. It is not handled together
+    with the softlockup detector. In fact, it is always build. And it even
+    used to be always enabled until the commit 7a5c8b57cec93196b ("sparc:
+    implement watchdog_nmi_enable and watchdog_nmi_disable") added in
+    v4.10-rc1.
+
+    I realized this when updating the comment for the 4th patch. My original
+    statement in v1 patchset was based on code reading. I looked at it from
+    a bad side.
+
+  + Removed superfluous "default n"
+  + Fixed typos.
 
 Petr Mladek (6):
   watchdog/hardlockup: Sort hardlockup detector related config values a
@@ -19,12 +43,12 @@ Petr Mladek (6):
  arch/powerpc/Kconfig           |   5 +-
  arch/powerpc/include/asm/nmi.h |   2 -
  arch/sparc/Kconfig             |   2 +-
- arch/sparc/Kconfig.debug       |  20 ++++++
+ arch/sparc/Kconfig.debug       |  14 ++++
  arch/sparc/include/asm/nmi.h   |   1 -
  include/linux/nmi.h            |  14 ++--
  kernel/watchdog.c              |   2 +-
- lib/Kconfig.debug              | 115 +++++++++++++++++++--------------
- 9 files changed, 104 insertions(+), 74 deletions(-)
+ lib/Kconfig.debug              | 114 ++++++++++++++++++---------------
+ 9 files changed, 97 insertions(+), 74 deletions(-)
 
 -- 
 2.35.3
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch	2023-06-16 16:42:07.741941379 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch	2023-06-16 16:28:53.594682369 +0200
@@ -1,7 +1,7 @@
-From 9d643e4254b224d22dd1411c51386ab686c052a7 Mon Sep 17 00:00:00 2001
+From bd7019bff3a28fb0bc163308101118adccf699d3 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Thu, 1 Jun 2023 15:35:09 +0200
-Subject: [PATCH 1/6] watchdog/hardlockup: Sort hardlockup detector related
+Subject: [PATCH v2 1/6] watchdog/hardlockup: Sort hardlockup detector related
  config values a logical way
 
 There are four possible variants of hardlockup detectors:
@@ -40,6 +40,14 @@ The logical order is:
       are temporary variables that are going to be removed in
       a followup patch.
 
+This is a preparation step for further cleanup. It will change the logic
+without shuffling the definitions.
+
+This change temporary breaks the C-like ordering where the variables are
+declared or defined before they are used. It is not really needed for
+Kconfig. Also the following patches will rework the logic so that
+the ordering will be C-like in the end.
+
 The patch just shuffles the definitions. It should not change the existing
 behavior.
 
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch	2023-06-16 16:42:07.745941436 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch	2023-06-16 16:28:53.594682369 +0200
@@ -1,7 +1,7 @@
-From b36400b9adf92a911dc2b9ee8f471cf3066a9f74 Mon Sep 17 00:00:00 2001
+From 91fabffa4aafae0611130d4de0471e847cee67dc Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Thu, 1 Jun 2023 17:10:11 +0200
-Subject: [PATCH 2/6] watchdog/hardlockup: Make the config checks more
+Subject: [PATCH v2 2/6] watchdog/hardlockup: Make the config checks more
  straightforward
 
 There are four possible variants of hardlockup detectors:
@@ -55,19 +55,19 @@ Make the logic more straightforward by t
 
     Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
     value is not preserved when the global switch is disabled.
-    The user has to make the decision when it is enabled again.
+    The user has to make the decision again when it gets re-enabled.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
 ---
- arch/Kconfig      | 22 ++++++++++++-----
- lib/Kconfig.debug | 63 ++++++++++++++++++++++++++++-------------------
+ arch/Kconfig      | 23 +++++++++++++-----
+ lib/Kconfig.debug | 62 +++++++++++++++++++++++++++--------------------
  2 files changed, 53 insertions(+), 32 deletions(-)
 
 diff --git a/arch/Kconfig b/arch/Kconfig
-index 422f0ffa269e..13c6e596cf9e 100644
+index 422f0ffa269e..77e5af5fda3f 100644
 --- a/arch/Kconfig
 +++ b/arch/Kconfig
-@@ -404,17 +404,27 @@ config HAVE_NMI_WATCHDOG
+@@ -404,17 +404,28 @@ config HAVE_NMI_WATCHDOG
  	depends on HAVE_NMI
  	bool
  	help
@@ -75,13 +75,14 @@ index 422f0ffa269e..13c6e596cf9e 100644
 -	  asm/nmi.h, and defines its own watchdog_hardlockup_probe() and
 -	  arch_touch_nmi_watchdog().
 +	  The arch provides its own hardlockup detector implementation instead
-+	  of the generic perf one.
++	  of the generic ones.
 +
 +	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
-+	  It does _not_ use the command line parameters and sysctl interface
-+	  used by generic hardlockup detectors. Instead it is enabled/disabled
-+	  by the top-level watchdog interface that is common for both softlockup
-+	  and hardlockup detectors.
++	  It is the last arch-specific implementation which was developed before
++	  adding the common infrastructure for handling hardlockup detectors.
++	  It is always built. It does _not_ use the common command line
++	  parameters and sysctl interface, except for
++	  /proc/sys/kernel/nmi_watchdog.
  
  config HAVE_HARDLOCKUP_DETECTOR_ARCH
  	bool
@@ -102,7 +103,7 @@ index 422f0ffa269e..13c6e596cf9e 100644
  config HAVE_PERF_REGS
  	bool
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index 3e91fa33c7a0..d201f5d3876b 100644
+index 3e91fa33c7a0..a0b0c4decb89 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1035,16 +1035,33 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
@@ -119,7 +120,7 @@ index 3e91fa33c7a0..d201f5d3876b 100644
 -# lockup detector rather than the perf based detector.
 +# Global switch whether to build a hardlockup detector at all. It is available
 +# only when the architecture supports at least one implementation. There are
-+# two exceptions. The hardlockup detector is newer enabled on:
++# two exceptions. The hardlockup detector is never enabled on:
 +#
 +#	s390: it reported many false positives there
 +#
@@ -143,7 +144,7 @@ index 3e91fa33c7a0..d201f5d3876b 100644
  
  	help
  	  Say Y here to enable the kernel to act as a watchdog to detect
-@@ -1055,9 +1072,15 @@ config HARDLOCKUP_DETECTOR
+@@ -1055,9 +1072,14 @@ config HARDLOCKUP_DETECTOR
  	  chance to run.  The current stack trace is displayed upon detection
  	  and the system will stay locked up.
  
@@ -156,11 +157,10 @@ index 3e91fa33c7a0..d201f5d3876b 100644
 +	depends on HARDLOCKUP_DETECTOR
 +	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
 +	depends on !HAVE_NMI_WATCHDOG
-+	default n
  	help
  	  Say Y here to prefer the buddy hardlockup detector over the perf one.
  
-@@ -1071,39 +1094,27 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
+@@ -1071,39 +1093,27 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  
  config HARDLOCKUP_DETECTOR_PERF
  	bool
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch	2023-06-16 16:42:07.749941492 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch	2023-06-16 16:28:53.594682369 +0200
@@ -1,16 +1,17 @@
-From b132b032466f5c07bc31bb1c22ed6db32871d725 Mon Sep 17 00:00:00 2001
+From f4b7044dd7847ae8d12535c464ea4bd0568b5456 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Fri, 2 Jun 2023 16:38:43 +0200
-Subject: [PATCH 3/6] watchdog/hardlockup: Declare arch_touch_nmi_watchdog()
+Subject: [PATCH v2 3/6] watchdog/hardlockup: Declare arch_touch_nmi_watchdog()
  only in linux/nmi.h
 
 arch_touch_nmi_watchdog() needs a different implementation for various
 hardlockup detector implementations. And it does nothing when
-any hardlockup detector is not build at all.
+any hardlockup detector is not built at all.
 
-arch_touch_nmi_watchdog() has to be declared in linux/nmi.h. It is done
-directly in this header file for the perf and buddy detectors. And it
-is done in the included asm/linux.h for arch specific detectors.
+arch_touch_nmi_watchdog() is declared via linux/nmi.h. And it must be
+defined as an empty function when there is no hardlockup detector.
+It is done directly in this header file for the perf and buddy detectors.
+And it is done in the included asm/linux.h for arch specific detectors.
 
 The reason probably is that the arch specific variants build the code
 using another conditions. For example, powerpc64/sparc64 builds the code
@@ -19,13 +20,14 @@ when CONFIG_PPC_WATCHDOG is enabled.
 Another reason might be that these architectures define more functions
 in asm/nmi.h anyway.
 
-However the generic code actually knows the information. The config
-variables HAVE_NMI_WATCHDOG and HAVE_HARDLOCKUP_DETECTOR_ARCH are used
-to decide whether to build the buddy detector.
-
-In particular, CONFIG_HARDLOCKUP_DETECTOR is set only when a generic
-or arch-specific hardlockup detector is built. The only exception
-is sparc64 which ignores the global HARDLOCKUP_DETECTOR switch.
+However the generic code actually knows when the function will be
+implemented. It happens when some full featured or the sparc64-specific
+hardlockup detector is built.
+
+In particular, CONFIG_HARDLOCKUP_DETECTOR can be enabled only when
+a generic or arch-specific full featured hardlockup detector is available.
+The only exception is sparc64 which can be built even when the global
+HARDLOCKUP_DETECTOR switch is disabled.
 
 The information about sparc64 is a bit complicated. The hardlockup
 detector is built there when CONFIG_HAVE_NMI_WATCHDOG is set and
@@ -48,6 +50,7 @@ The motivation is:
 The change should not change the existing behavior.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
+Reviewed-by: Douglas Anderson <dianders@chromium.org>
 ---
  arch/powerpc/include/asm/nmi.h |  2 --
  arch/sparc/include/asm/nmi.h   |  1 -
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch	2023-06-16 16:42:07.757941606 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch	2023-06-16 16:28:53.598682426 +0200
@@ -1,58 +1,95 @@
-From b898a6715dd01a5e3a6a404d70e12dcb2d9d7d0d Mon Sep 17 00:00:00 2001
+From 89632da8754cb2a70a48b357c2d5f099b121b88a Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
-Date: Tue, 6 Jun 2023 17:19:08 +0200
-Subject: [PATCH 4/6] watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG
+Date: Fri, 16 Jun 2023 15:43:34 +0200
+Subject: [PATCH v2 4/6] watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG
  sparc64-specific
 
-watchdog/hardlockup: Enable HAVE_NMI_WATCHDOG only on sparc64
+There are several hardlockup detector implementations and several Kconfig
+values which allow selection and build of the preferred one.
 
-HAVE_NMI_WATCHDOG is always enabled when SPARC64 is enabled. The sparc64
-implementation is special. It does not support the generic hardlockup
-related Kconfig values, command line parameters, and sysctl interface.
-Instead it is enabled/disabled by the top-level watchdog interface
-that is common for both softlockup and hardlockup detectors.
-
-As a result, sparc64 needs special treating in Kconfig and source
-files. The checks are a bit complicated because HAVE_NMI_WATCHDOG is
-automatically set when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
-But HAVE_HARDLOCKUP_DETECTOR_ARCH is set when the arch specific
-implementation uses the generic hardlockup detector related
-Kconfig variables, command line parameters, and sysctl interface.
-
-The motivation probably was to avoid changes in the code when
-the powerpc64-specific watchdog introduced HAVE_HARDLOCKUP_DETECTOR_ARCH.
-It probably allowed to re-use some existing checks for HAVE_NMI_WATCHDOG.
-
-But it actually made things pretty complicated. For example,
-the following check was needed in HARDLOCKUP_DETECTOR config variable:
-
-   depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
-
-The inverted logic makes things easier:
-
-  + HAVE_NMI_WATCHDOG is used only on sparc64. It is clear when
-    the sparc64 specific watchdog is used.
-
-  + HAVE_HARDLOCKUP_DETECTOR_ARCH is basically compatible with
-    the generic watchdogs. As a result, the common code
-    is marked by ifdef CONFIG_HARDLOCKUP_DETECTOR.
-
-As a result:
-
-  + Some conditions are easier.
-
-  + Some conditions use HAVE_HARDLOCKUP_DETECTOR_ARCH instead of
-    HAVE_NMI_WATCHDOG.
+CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb
+("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
+It was a preparation step for introducing the new generic perf hardlockup
+detector.
+
+The existing arch-specific variants did not support the to-be-created
+generic build configurations, sysctl interface, etc. This distinction
+was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog:
+Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
+in v2.6.38.
+
+CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105
+("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
+the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
+by three architectures, namely blackfin, mn10300, and sparc.
+
+The support for blackfin and mn10300 architectures has been completely
+dropped some time ago. And sparc is the only architecture with the historic
+NMI watchdog at the moment.
+
+And the old sparc implementation is really special. It is always built on
+sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b
+("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
+in v4.10-rc1.
+
+There are only few locations where the sparc64 NMI watchdog interacts
+with the generic hardlockup detectors code:
+
+  + implements arch_touch_nmi_watchdog() which is called from the generic
+    touch_nmi_watchdog()
+
+  + implements watchdog_hardlockup_enable()/disable() to support
+    /proc/sys/kernel/nmi_watchdog
+
+  + is always preferred over other generic watchdogs, see
+    CONFIG_HARDLOCKUP_DETECTOR
+
+  + includes asm/nmi.h into linux/nmi.h because some sparc-specific
+    functions are needed in sparc-specific code which includes
+    only linux/nmi.h.
+
+The situation became more complicated after the commit 05a4a95279311c3
+("kernel/watchdog: split up config options") and commit 2104180a53698df5
+("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
+They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
+specific hardlockup detector. It was compatible with the perf one
+regarding the general boot, sysctl, and programming interfaces.
+
+HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
+HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
+detectors had some common requirements, namely:
+
+  + implemented arch_touch_nmi_watchdog()
+  + included asm/nmi.h into linux/nmi.h
+  + defined the default value for /proc/sys/kernel/nmi_watchdog
+
+But it actually has made things pretty complicated when the generic
+buddy hardlockup detector was added. Before the generic perf detector
+was newer supported together with an arch-specific one. But the buddy
+detector could work on any SMP system. It means that an architecture
+could support both the arch-specific and buddy detector.
+
+As a result, there are few tricky dependencies. For example,
+CONFIG_HARDLOCKUP_DETECTOR depends on:
+
+  ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
+
+The problem is that the very special sparc implementation is defined as:
+
+  HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH
+
+Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
+without reading understanding the history.
+
+Make the logic less tricky and more self-explanatory by making
+HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
+HAVE_HARDLOCKUP_DETECTOR_SPARC64.
 
 Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
-and HARDLOCKUP_DETECTOR_BUDDY might depend only on
+and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
 HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
 and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
 
-Note that asm/nmi.h still has to be included for all arch-specific
-watchdogs. It declares more functions that are used in another
-arch specific code which includes only linux/nmi.h.
-
 Signed-off-by: Petr Mladek <pmladek@suse.com>
 
 watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64
@@ -74,19 +111,19 @@ from arch/Kconfig to arch/sparc/Kconfig.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
 ---
- arch/Kconfig             | 17 -----------------
+ arch/Kconfig             | 18 ------------------
  arch/sparc/Kconfig       |  2 +-
- arch/sparc/Kconfig.debug | 12 ++++++++++++
+ arch/sparc/Kconfig.debug |  9 +++++++++
  include/linux/nmi.h      |  5 ++---
  kernel/watchdog.c        |  2 +-
  lib/Kconfig.debug        | 15 +++++----------
- 6 files changed, 21 insertions(+), 32 deletions(-)
+ 6 files changed, 18 insertions(+), 33 deletions(-)
 
 diff --git a/arch/Kconfig b/arch/Kconfig
-index 13c6e596cf9e..6517e5477459 100644
+index 77e5af5fda3f..6517e5477459 100644
 --- a/arch/Kconfig
 +++ b/arch/Kconfig
-@@ -400,22 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
+@@ -400,23 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
  	  The arch chooses to use the generic perf-NMI-based hardlockup
  	  detector. Must define HAVE_PERF_EVENTS_NMI.
  
@@ -95,13 +132,14 @@ index 13c6e596cf9e..6517e5477459 100644
 -	bool
 -	help
 -	  The arch provides its own hardlockup detector implementation instead
--	  of the generic perf one.
+-	  of the generic ones.
 -
 -	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
--	  It does _not_ use the command line parameters and sysctl interface
--	  used by generic hardlockup detectors. Instead it is enabled/disabled
--	  by the top-level watchdog interface that is common for both softlockup
--	  and hardlockup detectors.
+-	  It is the last arch-specific implementation which was developed before
+-	  adding the common infrastructure for handling hardlockup detectors.
+-	  It is always built. It does _not_ use the common command line
+-	  parameters and sysctl interface, except for
+-	  /proc/sys/kernel/nmi_watchdog.
 -
  config HAVE_HARDLOCKUP_DETECTOR_ARCH
  	bool
@@ -109,7 +147,7 @@ index 13c6e596cf9e..6517e5477459 100644
  	help
  	  The arch provides its own hardlockup detector implementation instead
  	  of the generic ones.
-@@ -423,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
+@@ -424,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
  	  It uses the same command line parameters, and sysctl interface,
  	  as the generic hardlockup detectors.
  
@@ -133,10 +171,10 @@ index 8535e19062f6..7297f69635cb 100644
  	select HAVE_EBPF_JIT if SPARC64
  	select HAVE_DEBUG_BUGVERBOSE
 diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
-index 6b2bec1888b3..b6695303b8d4 100644
+index 6b2bec1888b3..4903b6847e43 100644
 --- a/arch/sparc/Kconfig.debug
 +++ b/arch/sparc/Kconfig.debug
-@@ -14,3 +14,15 @@ config FRAME_POINTER
+@@ -14,3 +14,12 @@ config FRAME_POINTER
  	bool
  	depends on MCOUNT
  	default y
@@ -145,13 +183,10 @@ index 6b2bec1888b3..b6695303b8d4 100644
 +	depends on HAVE_NMI
 +	bool
 +	help
-+	  Sparc64 provides its own hardlockup detector implementation instead
-+	  of the generic perf one.
-+
-+	  It does _not_ use the command line parameters and sysctl interface
-+	  used by generic hardlockup detectors. Instead it is enabled/disabled
-+	  by the top-level watchdog interface that is common for both softlockup
-+	  and hardlockup detectors.
++	  Sparc64 hardlockup detector is the last one developed before adding
++	  the common infrastructure for handling hardlockup detectors. It is
++	  always built. It does _not_ use the common command line parameters
++	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
 diff --git a/include/linux/nmi.h b/include/linux/nmi.h
 index b9e816bde14a..7ee6c35d1f05 100644
 --- a/include/linux/nmi.h
@@ -189,7 +224,7 @@ index 437c198933cf..babd2f3c8b72 100644
  #else
  # define WATCHDOG_HARDLOCKUP_DEFAULT	0
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index d201f5d3876b..2d8d8ce7c2d7 100644
+index a0b0c4decb89..e94664339e28 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1050,15 +1050,10 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
@@ -216,10 +251,10 @@ index d201f5d3876b..2d8d8ce7c2d7 100644
  	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
 -	depends on !HAVE_NMI_WATCHDOG
 +	depends on !HAVE_HARLOCKUP_DETECTOR_ARCH
- 	default n
  	help
  	  Say Y here to prefer the buddy hardlockup detector over the perf one.
-@@ -1096,7 +1091,7 @@ config HARDLOCKUP_DETECTOR_PERF
+ 
+@@ -1095,7 +1090,7 @@ config HARDLOCKUP_DETECTOR_PERF
  	bool
  	depends on HARDLOCKUP_DETECTOR
  	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
@@ -228,7 +263,7 @@ index d201f5d3876b..2d8d8ce7c2d7 100644
  	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
  
  config HARDLOCKUP_DETECTOR_BUDDY
-@@ -1104,7 +1099,7 @@ config HARDLOCKUP_DETECTOR_BUDDY
+@@ -1103,7 +1098,7 @@ config HARDLOCKUP_DETECTOR_BUDDY
  	depends on HARDLOCKUP_DETECTOR
  	depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY
  	depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch	2023-06-16 16:42:07.761941662 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch	2023-06-16 16:28:53.598682426 +0200
@@ -1,7 +1,7 @@
-From 39b335cbe5fff566d41a35b1211f92a5d1a56575 Mon Sep 17 00:00:00 2001
+From 1426aca29d60fcaa06c8ca125f236beca28f997a Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
-Date: Wed, 7 Jun 2023 14:59:58 +0200
-Subject: [PATCH 5/6] watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
+Date: Fri, 16 Jun 2023 15:45:49 +0200
+Subject: [PATCH v2 5/6] watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
 
 The HAVE_ prefix means that the code could be enabled. Add another
 variable for HAVE_HARDLOCKUP_DETECTOR_SPARC64 without this prefix.
@@ -24,18 +24,19 @@ CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=
 CONFIG_HARDLOCKUP_DETECTOR_SPARC64=y
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
+Reviewed-by: Douglas Anderson <dianders@chromium.org>
 ---
- arch/sparc/Kconfig.debug | 10 +++++++++-
- include/linux/nmi.h      |  4 ++--
- kernel/watchdog.c        |  2 +-
- lib/Kconfig.debug        |  2 +-
- 4 files changed, 13 insertions(+), 5 deletions(-)
+ arch/sparc/Kconfig.debug | 7 ++++++-
+ include/linux/nmi.h      | 4 ++--
+ kernel/watchdog.c        | 2 +-
+ lib/Kconfig.debug        | 2 +-
+ 4 files changed, 10 insertions(+), 5 deletions(-)
 
 diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
-index b6695303b8d4..0bb95b0aacf4 100644
+index 4903b6847e43..37e003665de6 100644
 --- a/arch/sparc/Kconfig.debug
 +++ b/arch/sparc/Kconfig.debug
-@@ -16,8 +16,9 @@ config FRAME_POINTER
+@@ -16,10 +16,15 @@ config FRAME_POINTER
  	default y
  
  config HAVE_HARDLOCKUP_DETECTOR_SPARC64
@@ -44,19 +45,14 @@ index b6695303b8d4..0bb95b0aacf4 100644
 +	depends on HAVE_NMI
 +	select HARDLOCKUP_DETECTOR_SPARC64
  	help
- 	  Sparc64 provides its own hardlockup detector implementation instead
- 	  of the generic perf one.
-@@ -26,3 +27,10 @@ config HAVE_HARDLOCKUP_DETECTOR_SPARC64
- 	  used by generic hardlockup detectors. Instead it is enabled/disabled
- 	  by the top-level watchdog interface that is common for both softlockup
- 	  and hardlockup detectors.
+ 	  Sparc64 hardlockup detector is the last one developed before adding
+ 	  the common infrastructure for handling hardlockup detectors. It is
+ 	  always built. It does _not_ use the common command line parameters
+ 	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
 +
 +config HARDLOCKUP_DETECTOR_SPARC64
 +	bool
 +	depends on HAVE_HARDLOCKUP_DETECTOR_SPARC64
-+
-+	help
-+	  The custom hardlockup detector is always built when possible.
 diff --git a/include/linux/nmi.h b/include/linux/nmi.h
 index 7ee6c35d1f05..515d6724f469 100644
 --- a/include/linux/nmi.h
@@ -93,7 +89,7 @@ index babd2f3c8b72..a2154e753cb4 100644
  #else
  # define WATCHDOG_HARDLOCKUP_DEFAULT	0
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index 2d8d8ce7c2d7..116904e65d9f 100644
+index e94664339e28..f285e9cf967a 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1052,7 +1052,7 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch	2023-06-16 16:42:07.769941775 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch	2023-06-16 16:28:53.598682426 +0200
@@ -1,7 +1,7 @@
-From 0456ed568d98ba5bba8148e4f60d769e3c5a6c7a Mon Sep 17 00:00:00 2001
+From bcf4dfab5a64ee691eb5154b1361ed59610c9387 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Tue, 6 Jun 2023 09:32:05 +0200
-Subject: [PATCH 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
+Subject: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
 
 The HAVE_ prefix means that the code could be enabled. Add another
 variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
@@ -15,6 +15,7 @@ As a result HAVE_HARDLOCKUP_DETECTOR_PER
 on arm, x86, powerpc architectures.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
+Reviewed-by: Douglas Anderson <dianders@chromium.org>
 ---
  arch/powerpc/Kconfig | 5 ++---
  include/linux/nmi.h  | 2 +-
@@ -58,7 +59,7 @@ index 515d6724f469..ec808ebd36ba 100644
  #endif
  
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index 116904e65d9f..97853ca54dc7 100644
+index f285e9cf967a..2c4bb72e72ad 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1056,6 +1056,7 @@ config HARDLOCKUP_DETECTOR
@@ -69,7 +70,7 @@ index 116904e65d9f..97853ca54dc7 100644
  	select LOCKUP_DETECTOR
  
  	help
-@@ -1102,6 +1103,14 @@ config HARDLOCKUP_DETECTOR_BUDDY
+@@ -1101,6 +1102,14 @@ config HARDLOCKUP_DETECTOR_BUDDY
  	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
  	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
  
@@ -78,8 +79,8 @@ index 116904e65d9f..97853ca54dc7 100644
 +	depends on HARDLOCKUP_DETECTOR
 +	depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
 +	help
-+	  The arch-specific implementation of the hardlockup detector is
-+	  available.
++	  The arch-specific implementation of the hardlockup detector will
++	  be used.
 +
  #
  # Both the "perf" and "buddy" hardlockup detectors count hrtimer

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors
@ 2023-06-16 15:21   ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-16 15:21 UTC (permalink / raw)
  To: Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, linux-perf-users, Nicholas Piggin,
	sparclinux, linuxppc-dev, David S . Miller

On Fri 2023-06-16 17:06:12, Petr Mladek wrote:
> Hi,
> 
> this patchset is supposed to replace the last patch in the patchset cleaning
> up after introducing the buddy detector, see
> https://lore.kernel.org/r/20230526184139.10.I821fe7609e57608913fe05abd8f35b343e7a9aae@changeid
> 
> Changes against v1:
> 
>   + Better explained the C-like ordering in the 1st patch.
> 
>   + Squashed patches for splitting and renaming HAVE_NMI_WATCHDOG,
>     updated commit message with the history and more facts.
> 
>   + Updated comments about the sparc64 variant. It is not handled together
>     with the softlockup detector. In fact, it is always build. And it even
>     used to be always enabled until the commit 7a5c8b57cec93196b ("sparc:
>     implement watchdog_nmi_enable and watchdog_nmi_disable") added in
>     v4.10-rc1.
> 
>     I realized this when updating the comment for the 4th patch. My original
>     statement in v1 patchset was based on code reading. I looked at it from
>     a bad side.
> 
>   + Removed superfluous "default n"
>   + Fixed typos.

I sometimes find the diff between the two versions useful. Especially, when the
patches are not trivial and the last version made only cosmetic
changes.

This is what I got by comparing "git format-patch" generated patchsets:

diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0000-cover-letter.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0000-cover-letter.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0000-cover-letter.patch	2023-06-16 16:42:07.769941775 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0000-cover-letter.patch	2023-06-16 16:39:42.179877676 +0200
@@ -1,9 +1,33 @@
-From 0456ed568d98ba5bba8148e4f60d769e3c5a6c7a Mon Sep 17 00:00:00 2001
+From bcf4dfab5a64ee691eb5154b1361ed59610c9387 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
-Date: Fri, 16 Jun 2023 16:42:07 +0200
-Subject: [PATCH 0/6] *** SUBJECT HERE ***
+Date: Fri, 16 Jun 2023 16:28:13 +0200
+Subject: [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors
 
-*** BLURB HERE ***
+Hi,
+
+this patchset is supposed to replace the last patch in the patchset cleaning
+up after introducing the buddy detector, see
+https://lore.kernel.org/r/20230526184139.10.I821fe7609e57608913fe05abd8f35b343e7a9aae@changeid
+
+Changes against v1:
+
+  + Better explained the C-like ordering in the 1st patch.
+
+  + Squashed patches for splitting and renaming HAVE_NMI_WATCHDOG,
+    updated commit message with the history and more facts.
+
+  + Updated comments about the sparc64 variant. It is not handled together
+    with the softlockup detector. In fact, it is always build. And it even
+    used to be always enabled until the commit 7a5c8b57cec93196b ("sparc:
+    implement watchdog_nmi_enable and watchdog_nmi_disable") added in
+    v4.10-rc1.
+
+    I realized this when updating the comment for the 4th patch. My original
+    statement in v1 patchset was based on code reading. I looked at it from
+    a bad side.
+
+  + Removed superfluous "default n"
+  + Fixed typos.
 
 Petr Mladek (6):
   watchdog/hardlockup: Sort hardlockup detector related config values a
@@ -19,12 +43,12 @@ Petr Mladek (6):
  arch/powerpc/Kconfig           |   5 +-
  arch/powerpc/include/asm/nmi.h |   2 -
  arch/sparc/Kconfig             |   2 +-
- arch/sparc/Kconfig.debug       |  20 ++++++
+ arch/sparc/Kconfig.debug       |  14 ++++
  arch/sparc/include/asm/nmi.h   |   1 -
  include/linux/nmi.h            |  14 ++--
  kernel/watchdog.c              |   2 +-
- lib/Kconfig.debug              | 115 +++++++++++++++++++--------------
- 9 files changed, 104 insertions(+), 74 deletions(-)
+ lib/Kconfig.debug              | 114 ++++++++++++++++++---------------
+ 9 files changed, 97 insertions(+), 74 deletions(-)
 
 -- 
 2.35.3
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch	2023-06-16 16:42:07.741941379 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0001-watchdog-hardlockup-Sort-hardlockup-detector-related.patch	2023-06-16 16:28:53.594682369 +0200
@@ -1,7 +1,7 @@
-From 9d643e4254b224d22dd1411c51386ab686c052a7 Mon Sep 17 00:00:00 2001
+From bd7019bff3a28fb0bc163308101118adccf699d3 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Thu, 1 Jun 2023 15:35:09 +0200
-Subject: [PATCH 1/6] watchdog/hardlockup: Sort hardlockup detector related
+Subject: [PATCH v2 1/6] watchdog/hardlockup: Sort hardlockup detector related
  config values a logical way
 
 There are four possible variants of hardlockup detectors:
@@ -40,6 +40,14 @@ The logical order is:
       are temporary variables that are going to be removed in
       a followup patch.
 
+This is a preparation step for further cleanup. It will change the logic
+without shuffling the definitions.
+
+This change temporary breaks the C-like ordering where the variables are
+declared or defined before they are used. It is not really needed for
+Kconfig. Also the following patches will rework the logic so that
+the ordering will be C-like in the end.
+
 The patch just shuffles the definitions. It should not change the existing
 behavior.
 
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch	2023-06-16 16:42:07.745941436 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0002-watchdog-hardlockup-Make-the-config-checks-more-stra.patch	2023-06-16 16:28:53.594682369 +0200
@@ -1,7 +1,7 @@
-From b36400b9adf92a911dc2b9ee8f471cf3066a9f74 Mon Sep 17 00:00:00 2001
+From 91fabffa4aafae0611130d4de0471e847cee67dc Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Thu, 1 Jun 2023 17:10:11 +0200
-Subject: [PATCH 2/6] watchdog/hardlockup: Make the config checks more
+Subject: [PATCH v2 2/6] watchdog/hardlockup: Make the config checks more
  straightforward
 
 There are four possible variants of hardlockup detectors:
@@ -55,19 +55,19 @@ Make the logic more straightforward by t
 
     Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
     value is not preserved when the global switch is disabled.
-    The user has to make the decision when it is enabled again.
+    The user has to make the decision again when it gets re-enabled.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
 ---
- arch/Kconfig      | 22 ++++++++++++-----
- lib/Kconfig.debug | 63 ++++++++++++++++++++++++++++-------------------
+ arch/Kconfig      | 23 +++++++++++++-----
+ lib/Kconfig.debug | 62 +++++++++++++++++++++++++++--------------------
  2 files changed, 53 insertions(+), 32 deletions(-)
 
 diff --git a/arch/Kconfig b/arch/Kconfig
-index 422f0ffa269e..13c6e596cf9e 100644
+index 422f0ffa269e..77e5af5fda3f 100644
 --- a/arch/Kconfig
 +++ b/arch/Kconfig
-@@ -404,17 +404,27 @@ config HAVE_NMI_WATCHDOG
+@@ -404,17 +404,28 @@ config HAVE_NMI_WATCHDOG
  	depends on HAVE_NMI
  	bool
  	help
@@ -75,13 +75,14 @@ index 422f0ffa269e..13c6e596cf9e 100644
 -	  asm/nmi.h, and defines its own watchdog_hardlockup_probe() and
 -	  arch_touch_nmi_watchdog().
 +	  The arch provides its own hardlockup detector implementation instead
-+	  of the generic perf one.
++	  of the generic ones.
 +
 +	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
-+	  It does _not_ use the command line parameters and sysctl interface
-+	  used by generic hardlockup detectors. Instead it is enabled/disabled
-+	  by the top-level watchdog interface that is common for both softlockup
-+	  and hardlockup detectors.
++	  It is the last arch-specific implementation which was developed before
++	  adding the common infrastructure for handling hardlockup detectors.
++	  It is always built. It does _not_ use the common command line
++	  parameters and sysctl interface, except for
++	  /proc/sys/kernel/nmi_watchdog.
  
  config HAVE_HARDLOCKUP_DETECTOR_ARCH
  	bool
@@ -102,7 +103,7 @@ index 422f0ffa269e..13c6e596cf9e 100644
  config HAVE_PERF_REGS
  	bool
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index 3e91fa33c7a0..d201f5d3876b 100644
+index 3e91fa33c7a0..a0b0c4decb89 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1035,16 +1035,33 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
@@ -119,7 +120,7 @@ index 3e91fa33c7a0..d201f5d3876b 100644
 -# lockup detector rather than the perf based detector.
 +# Global switch whether to build a hardlockup detector at all. It is available
 +# only when the architecture supports at least one implementation. There are
-+# two exceptions. The hardlockup detector is newer enabled on:
++# two exceptions. The hardlockup detector is never enabled on:
 +#
 +#	s390: it reported many false positives there
 +#
@@ -143,7 +144,7 @@ index 3e91fa33c7a0..d201f5d3876b 100644
  
  	help
  	  Say Y here to enable the kernel to act as a watchdog to detect
-@@ -1055,9 +1072,15 @@ config HARDLOCKUP_DETECTOR
+@@ -1055,9 +1072,14 @@ config HARDLOCKUP_DETECTOR
  	  chance to run.  The current stack trace is displayed upon detection
  	  and the system will stay locked up.
  
@@ -156,11 +157,10 @@ index 3e91fa33c7a0..d201f5d3876b 100644
 +	depends on HARDLOCKUP_DETECTOR
 +	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
 +	depends on !HAVE_NMI_WATCHDOG
-+	default n
  	help
  	  Say Y here to prefer the buddy hardlockup detector over the perf one.
  
-@@ -1071,39 +1094,27 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
+@@ -1071,39 +1093,27 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  
  config HARDLOCKUP_DETECTOR_PERF
  	bool
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch	2023-06-16 16:42:07.749941492 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0003-watchdog-hardlockup-Declare-arch_touch_nmi_watchdog-.patch	2023-06-16 16:28:53.594682369 +0200
@@ -1,16 +1,17 @@
-From b132b032466f5c07bc31bb1c22ed6db32871d725 Mon Sep 17 00:00:00 2001
+From f4b7044dd7847ae8d12535c464ea4bd0568b5456 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Fri, 2 Jun 2023 16:38:43 +0200
-Subject: [PATCH 3/6] watchdog/hardlockup: Declare arch_touch_nmi_watchdog()
+Subject: [PATCH v2 3/6] watchdog/hardlockup: Declare arch_touch_nmi_watchdog()
  only in linux/nmi.h
 
 arch_touch_nmi_watchdog() needs a different implementation for various
 hardlockup detector implementations. And it does nothing when
-any hardlockup detector is not build at all.
+any hardlockup detector is not built at all.
 
-arch_touch_nmi_watchdog() has to be declared in linux/nmi.h. It is done
-directly in this header file for the perf and buddy detectors. And it
-is done in the included asm/linux.h for arch specific detectors.
+arch_touch_nmi_watchdog() is declared via linux/nmi.h. And it must be
+defined as an empty function when there is no hardlockup detector.
+It is done directly in this header file for the perf and buddy detectors.
+And it is done in the included asm/linux.h for arch specific detectors.
 
 The reason probably is that the arch specific variants build the code
 using another conditions. For example, powerpc64/sparc64 builds the code
@@ -19,13 +20,14 @@ when CONFIG_PPC_WATCHDOG is enabled.
 Another reason might be that these architectures define more functions
 in asm/nmi.h anyway.
 
-However the generic code actually knows the information. The config
-variables HAVE_NMI_WATCHDOG and HAVE_HARDLOCKUP_DETECTOR_ARCH are used
-to decide whether to build the buddy detector.
-
-In particular, CONFIG_HARDLOCKUP_DETECTOR is set only when a generic
-or arch-specific hardlockup detector is built. The only exception
-is sparc64 which ignores the global HARDLOCKUP_DETECTOR switch.
+However the generic code actually knows when the function will be
+implemented. It happens when some full featured or the sparc64-specific
+hardlockup detector is built.
+
+In particular, CONFIG_HARDLOCKUP_DETECTOR can be enabled only when
+a generic or arch-specific full featured hardlockup detector is available.
+The only exception is sparc64 which can be built even when the global
+HARDLOCKUP_DETECTOR switch is disabled.
 
 The information about sparc64 is a bit complicated. The hardlockup
 detector is built there when CONFIG_HAVE_NMI_WATCHDOG is set and
@@ -48,6 +50,7 @@ The motivation is:
 The change should not change the existing behavior.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
+Reviewed-by: Douglas Anderson <dianders@chromium.org>
 ---
  arch/powerpc/include/asm/nmi.h |  2 --
  arch/sparc/include/asm/nmi.h   |  1 -
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch	2023-06-16 16:42:07.757941606 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0004-watchdog-hardlockup-Make-HAVE_NMI_WATCHDOG-sparc64-s.patch	2023-06-16 16:28:53.598682426 +0200
@@ -1,58 +1,95 @@
-From b898a6715dd01a5e3a6a404d70e12dcb2d9d7d0d Mon Sep 17 00:00:00 2001
+From 89632da8754cb2a70a48b357c2d5f099b121b88a Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
-Date: Tue, 6 Jun 2023 17:19:08 +0200
-Subject: [PATCH 4/6] watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG
+Date: Fri, 16 Jun 2023 15:43:34 +0200
+Subject: [PATCH v2 4/6] watchdog/hardlockup:  Make HAVE_NMI_WATCHDOG
  sparc64-specific
 
-watchdog/hardlockup: Enable HAVE_NMI_WATCHDOG only on sparc64
+There are several hardlockup detector implementations and several Kconfig
+values which allow selection and build of the preferred one.
 
-HAVE_NMI_WATCHDOG is always enabled when SPARC64 is enabled. The sparc64
-implementation is special. It does not support the generic hardlockup
-related Kconfig values, command line parameters, and sysctl interface.
-Instead it is enabled/disabled by the top-level watchdog interface
-that is common for both softlockup and hardlockup detectors.
-
-As a result, sparc64 needs special treating in Kconfig and source
-files. The checks are a bit complicated because HAVE_NMI_WATCHDOG is
-automatically set when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
-But HAVE_HARDLOCKUP_DETECTOR_ARCH is set when the arch specific
-implementation uses the generic hardlockup detector related
-Kconfig variables, command line parameters, and sysctl interface.
-
-The motivation probably was to avoid changes in the code when
-the powerpc64-specific watchdog introduced HAVE_HARDLOCKUP_DETECTOR_ARCH.
-It probably allowed to re-use some existing checks for HAVE_NMI_WATCHDOG.
-
-But it actually made things pretty complicated. For example,
-the following check was needed in HARDLOCKUP_DETECTOR config variable:
-
-   depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
-
-The inverted logic makes things easier:
-
-  + HAVE_NMI_WATCHDOG is used only on sparc64. It is clear when
-    the sparc64 specific watchdog is used.
-
-  + HAVE_HARDLOCKUP_DETECTOR_ARCH is basically compatible with
-    the generic watchdogs. As a result, the common code
-    is marked by ifdef CONFIG_HARDLOCKUP_DETECTOR.
-
-As a result:
-
-  + Some conditions are easier.
-
-  + Some conditions use HAVE_HARDLOCKUP_DETECTOR_ARCH instead of
-    HAVE_NMI_WATCHDOG.
+CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb
+("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
+It was a preparation step for introducing the new generic perf hardlockup
+detector.
+
+The existing arch-specific variants did not support the to-be-created
+generic build configurations, sysctl interface, etc. This distinction
+was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog:
+Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
+in v2.6.38.
+
+CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105
+("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
+the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
+by three architectures, namely blackfin, mn10300, and sparc.
+
+The support for blackfin and mn10300 architectures has been completely
+dropped some time ago. And sparc is the only architecture with the historic
+NMI watchdog at the moment.
+
+And the old sparc implementation is really special. It is always built on
+sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b
+("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
+in v4.10-rc1.
+
+There are only few locations where the sparc64 NMI watchdog interacts
+with the generic hardlockup detectors code:
+
+  + implements arch_touch_nmi_watchdog() which is called from the generic
+    touch_nmi_watchdog()
+
+  + implements watchdog_hardlockup_enable()/disable() to support
+    /proc/sys/kernel/nmi_watchdog
+
+  + is always preferred over other generic watchdogs, see
+    CONFIG_HARDLOCKUP_DETECTOR
+
+  + includes asm/nmi.h into linux/nmi.h because some sparc-specific
+    functions are needed in sparc-specific code which includes
+    only linux/nmi.h.
+
+The situation became more complicated after the commit 05a4a95279311c3
+("kernel/watchdog: split up config options") and commit 2104180a53698df5
+("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
+They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
+specific hardlockup detector. It was compatible with the perf one
+regarding the general boot, sysctl, and programming interfaces.
+
+HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
+HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
+detectors had some common requirements, namely:
+
+  + implemented arch_touch_nmi_watchdog()
+  + included asm/nmi.h into linux/nmi.h
+  + defined the default value for /proc/sys/kernel/nmi_watchdog
+
+But it actually has made things pretty complicated when the generic
+buddy hardlockup detector was added. Before the generic perf detector
+was newer supported together with an arch-specific one. But the buddy
+detector could work on any SMP system. It means that an architecture
+could support both the arch-specific and buddy detector.
+
+As a result, there are few tricky dependencies. For example,
+CONFIG_HARDLOCKUP_DETECTOR depends on:
+
+  ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
+
+The problem is that the very special sparc implementation is defined as:
+
+  HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH
+
+Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
+without reading understanding the history.
+
+Make the logic less tricky and more self-explanatory by making
+HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
+HAVE_HARDLOCKUP_DETECTOR_SPARC64.
 
 Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
-and HARDLOCKUP_DETECTOR_BUDDY might depend only on
+and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
 HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
 and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
 
-Note that asm/nmi.h still has to be included for all arch-specific
-watchdogs. It declares more functions that are used in another
-arch specific code which includes only linux/nmi.h.
-
 Signed-off-by: Petr Mladek <pmladek@suse.com>
 
 watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64
@@ -74,19 +111,19 @@ from arch/Kconfig to arch/sparc/Kconfig.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
 ---
- arch/Kconfig             | 17 -----------------
+ arch/Kconfig             | 18 ------------------
  arch/sparc/Kconfig       |  2 +-
- arch/sparc/Kconfig.debug | 12 ++++++++++++
+ arch/sparc/Kconfig.debug |  9 +++++++++
  include/linux/nmi.h      |  5 ++---
  kernel/watchdog.c        |  2 +-
  lib/Kconfig.debug        | 15 +++++----------
- 6 files changed, 21 insertions(+), 32 deletions(-)
+ 6 files changed, 18 insertions(+), 33 deletions(-)
 
 diff --git a/arch/Kconfig b/arch/Kconfig
-index 13c6e596cf9e..6517e5477459 100644
+index 77e5af5fda3f..6517e5477459 100644
 --- a/arch/Kconfig
 +++ b/arch/Kconfig
-@@ -400,22 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
+@@ -400,23 +400,8 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
  	  The arch chooses to use the generic perf-NMI-based hardlockup
  	  detector. Must define HAVE_PERF_EVENTS_NMI.
  
@@ -95,13 +132,14 @@ index 13c6e596cf9e..6517e5477459 100644
 -	bool
 -	help
 -	  The arch provides its own hardlockup detector implementation instead
--	  of the generic perf one.
+-	  of the generic ones.
 -
 -	  Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
--	  It does _not_ use the command line parameters and sysctl interface
--	  used by generic hardlockup detectors. Instead it is enabled/disabled
--	  by the top-level watchdog interface that is common for both softlockup
--	  and hardlockup detectors.
+-	  It is the last arch-specific implementation which was developed before
+-	  adding the common infrastructure for handling hardlockup detectors.
+-	  It is always built. It does _not_ use the common command line
+-	  parameters and sysctl interface, except for
+-	  /proc/sys/kernel/nmi_watchdog.
 -
  config HAVE_HARDLOCKUP_DETECTOR_ARCH
  	bool
@@ -109,7 +147,7 @@ index 13c6e596cf9e..6517e5477459 100644
  	help
  	  The arch provides its own hardlockup detector implementation instead
  	  of the generic ones.
-@@ -423,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
+@@ -424,9 +409,6 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
  	  It uses the same command line parameters, and sysctl interface,
  	  as the generic hardlockup detectors.
  
@@ -133,10 +171,10 @@ index 8535e19062f6..7297f69635cb 100644
  	select HAVE_EBPF_JIT if SPARC64
  	select HAVE_DEBUG_BUGVERBOSE
 diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
-index 6b2bec1888b3..b6695303b8d4 100644
+index 6b2bec1888b3..4903b6847e43 100644
 --- a/arch/sparc/Kconfig.debug
 +++ b/arch/sparc/Kconfig.debug
-@@ -14,3 +14,15 @@ config FRAME_POINTER
+@@ -14,3 +14,12 @@ config FRAME_POINTER
  	bool
  	depends on MCOUNT
  	default y
@@ -145,13 +183,10 @@ index 6b2bec1888b3..b6695303b8d4 100644
 +	depends on HAVE_NMI
 +	bool
 +	help
-+	  Sparc64 provides its own hardlockup detector implementation instead
-+	  of the generic perf one.
-+
-+	  It does _not_ use the command line parameters and sysctl interface
-+	  used by generic hardlockup detectors. Instead it is enabled/disabled
-+	  by the top-level watchdog interface that is common for both softlockup
-+	  and hardlockup detectors.
++	  Sparc64 hardlockup detector is the last one developed before adding
++	  the common infrastructure for handling hardlockup detectors. It is
++	  always built. It does _not_ use the common command line parameters
++	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
 diff --git a/include/linux/nmi.h b/include/linux/nmi.h
 index b9e816bde14a..7ee6c35d1f05 100644
 --- a/include/linux/nmi.h
@@ -189,7 +224,7 @@ index 437c198933cf..babd2f3c8b72 100644
  #else
  # define WATCHDOG_HARDLOCKUP_DEFAULT	0
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index d201f5d3876b..2d8d8ce7c2d7 100644
+index a0b0c4decb89..e94664339e28 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1050,15 +1050,10 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
@@ -216,10 +251,10 @@ index d201f5d3876b..2d8d8ce7c2d7 100644
  	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
 -	depends on !HAVE_NMI_WATCHDOG
 +	depends on !HAVE_HARLOCKUP_DETECTOR_ARCH
- 	default n
  	help
  	  Say Y here to prefer the buddy hardlockup detector over the perf one.
-@@ -1096,7 +1091,7 @@ config HARDLOCKUP_DETECTOR_PERF
+ 
+@@ -1095,7 +1090,7 @@ config HARDLOCKUP_DETECTOR_PERF
  	bool
  	depends on HARDLOCKUP_DETECTOR
  	depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
@@ -228,7 +263,7 @@ index d201f5d3876b..2d8d8ce7c2d7 100644
  	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
  
  config HARDLOCKUP_DETECTOR_BUDDY
-@@ -1104,7 +1099,7 @@ config HARDLOCKUP_DETECTOR_BUDDY
+@@ -1103,7 +1098,7 @@ config HARDLOCKUP_DETECTOR_BUDDY
  	depends on HARDLOCKUP_DETECTOR
  	depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY
  	depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch	2023-06-16 16:42:07.761941662 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0005-watchdog-sparc64-Define-HARDLOCKUP_DETECTOR_SPARC64.patch	2023-06-16 16:28:53.598682426 +0200
@@ -1,7 +1,7 @@
-From 39b335cbe5fff566d41a35b1211f92a5d1a56575 Mon Sep 17 00:00:00 2001
+From 1426aca29d60fcaa06c8ca125f236beca28f997a Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
-Date: Wed, 7 Jun 2023 14:59:58 +0200
-Subject: [PATCH 5/6] watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
+Date: Fri, 16 Jun 2023 15:45:49 +0200
+Subject: [PATCH v2 5/6] watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64
 
 The HAVE_ prefix means that the code could be enabled. Add another
 variable for HAVE_HARDLOCKUP_DETECTOR_SPARC64 without this prefix.
@@ -24,18 +24,19 @@ CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=
 CONFIG_HARDLOCKUP_DETECTOR_SPARC64=y
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
+Reviewed-by: Douglas Anderson <dianders@chromium.org>
 ---
- arch/sparc/Kconfig.debug | 10 +++++++++-
- include/linux/nmi.h      |  4 ++--
- kernel/watchdog.c        |  2 +-
- lib/Kconfig.debug        |  2 +-
- 4 files changed, 13 insertions(+), 5 deletions(-)
+ arch/sparc/Kconfig.debug | 7 ++++++-
+ include/linux/nmi.h      | 4 ++--
+ kernel/watchdog.c        | 2 +-
+ lib/Kconfig.debug        | 2 +-
+ 4 files changed, 10 insertions(+), 5 deletions(-)
 
 diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
-index b6695303b8d4..0bb95b0aacf4 100644
+index 4903b6847e43..37e003665de6 100644
 --- a/arch/sparc/Kconfig.debug
 +++ b/arch/sparc/Kconfig.debug
-@@ -16,8 +16,9 @@ config FRAME_POINTER
+@@ -16,10 +16,15 @@ config FRAME_POINTER
  	default y
  
  config HAVE_HARDLOCKUP_DETECTOR_SPARC64
@@ -44,19 +45,14 @@ index b6695303b8d4..0bb95b0aacf4 100644
 +	depends on HAVE_NMI
 +	select HARDLOCKUP_DETECTOR_SPARC64
  	help
- 	  Sparc64 provides its own hardlockup detector implementation instead
- 	  of the generic perf one.
-@@ -26,3 +27,10 @@ config HAVE_HARDLOCKUP_DETECTOR_SPARC64
- 	  used by generic hardlockup detectors. Instead it is enabled/disabled
- 	  by the top-level watchdog interface that is common for both softlockup
- 	  and hardlockup detectors.
+ 	  Sparc64 hardlockup detector is the last one developed before adding
+ 	  the common infrastructure for handling hardlockup detectors. It is
+ 	  always built. It does _not_ use the common command line parameters
+ 	  and sysctl interface, except for /proc/sys/kernel/nmi_watchdog.
 +
 +config HARDLOCKUP_DETECTOR_SPARC64
 +	bool
 +	depends on HAVE_HARDLOCKUP_DETECTOR_SPARC64
-+
-+	help
-+	  The custom hardlockup detector is always built when possible.
 diff --git a/include/linux/nmi.h b/include/linux/nmi.h
 index 7ee6c35d1f05..515d6724f469 100644
 --- a/include/linux/nmi.h
@@ -93,7 +89,7 @@ index babd2f3c8b72..a2154e753cb4 100644
  #else
  # define WATCHDOG_HARDLOCKUP_DEFAULT	0
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index 2d8d8ce7c2d7..116904e65d9f 100644
+index e94664339e28..f285e9cf967a 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1052,7 +1052,7 @@ config HAVE_HARDLOCKUP_DETECTOR_BUDDY
diff -purN watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch
--- watchdog-buddy-hardlockup-detector-config-cleanup-v1-iter1-reference/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch	2023-06-16 16:42:07.769941775 +0200
+++ watchdog-buddy-hardlockup-detector-config-cleanup-v2-iter1/0006-watchdog-hardlockup-Define-HARDLOCKUP_DETECTOR_ARCH.patch	2023-06-16 16:28:53.598682426 +0200
@@ -1,7 +1,7 @@
-From 0456ed568d98ba5bba8148e4f60d769e3c5a6c7a Mon Sep 17 00:00:00 2001
+From bcf4dfab5a64ee691eb5154b1361ed59610c9387 Mon Sep 17 00:00:00 2001
 From: Petr Mladek <pmladek@suse.com>
 Date: Tue, 6 Jun 2023 09:32:05 +0200
-Subject: [PATCH 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
+Subject: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
 
 The HAVE_ prefix means that the code could be enabled. Add another
 variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
@@ -15,6 +15,7 @@ As a result HAVE_HARDLOCKUP_DETECTOR_PER
 on arm, x86, powerpc architectures.
 
 Signed-off-by: Petr Mladek <pmladek@suse.com>
+Reviewed-by: Douglas Anderson <dianders@chromium.org>
 ---
  arch/powerpc/Kconfig | 5 ++---
  include/linux/nmi.h  | 2 +-
@@ -58,7 +59,7 @@ index 515d6724f469..ec808ebd36ba 100644
  #endif
  
 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index 116904e65d9f..97853ca54dc7 100644
+index f285e9cf967a..2c4bb72e72ad 100644
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
 @@ -1056,6 +1056,7 @@ config HARDLOCKUP_DETECTOR
@@ -69,7 +70,7 @@ index 116904e65d9f..97853ca54dc7 100644
  	select LOCKUP_DETECTOR
  
  	help
-@@ -1102,6 +1103,14 @@ config HARDLOCKUP_DETECTOR_BUDDY
+@@ -1101,6 +1102,14 @@ config HARDLOCKUP_DETECTOR_BUDDY
  	depends on !HAVE_HARDLOCKUP_DETECTOR_ARCH
  	select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
  
@@ -78,8 +79,8 @@ index 116904e65d9f..97853ca54dc7 100644
 +	depends on HARDLOCKUP_DETECTOR
 +	depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
 +	help
-+	  The arch-specific implementation of the hardlockup detector is
-+	  available.
++	  The arch-specific implementation of the hardlockup detector will
++	  be used.
 +
  #
  # Both the "perf" and "buddy" hardlockup detectors count hrtimer

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 1/6] watchdog/hardlockup: Sort hardlockup detector related config values a logical way
  2023-06-16 15:06   ` Petr Mladek
@ 2023-06-16 16:44     ` Doug Anderson
  -1 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-16 16:44 UTC (permalink / raw)
  To: Petr Mladek
  Cc: Andrew Morton, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	Michael Ellerman, linuxppc-dev, Christophe Leroy, sparclinux,
	David S . Miller, linux-perf-users

Hi,

On Fri, Jun 16, 2023 at 8:06 AM Petr Mladek <pmladek@suse.com> wrote:
>
> There are four possible variants of hardlockup detectors:
>
>   + buddy: available when SMP is set.
>
>   + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.
>
>   + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
>
>   + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
>         and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.
>
> Only one hardlockup detector can be compiled in. The selection is done
> using quite complex dependencies between several CONFIG variables.
> The following patches will try to make it more straightforward.
>
> As a first step, reorder the definitions of the various CONFIG variables.
> The logical order is:
>
>    1. HAVE_* variables define available variants. They are typically
>       defined in the arch/ config files.
>
>    2. HARDLOCKUP_DETECTOR y/n variable defines whether the hardlockup
>       detector is enabled at all.
>
>    3. HARDLOCKUP_DETECTOR_PREFER_BUDDY y/n variable defines whether
>       the buddy detector should be preferred over the perf one.
>       Note that the arch specific variants are always preferred when
>       available.
>
>    4. HARDLOCKUP_DETECTOR_PERF/BUDDY variables define whether the given
>       detector is enabled in the end.
>
>    5. HAVE_HARDLOCKUP_DETECTOR_NON_ARCH and HARDLOCKUP_DETECTOR_NON_ARCH
>       are temporary variables that are going to be removed in
>       a followup patch.
>
> This is a preparation step for further cleanup. It will change the logic
> without shuffling the definitions.
>
> This change temporary breaks the C-like ordering where the variables are
> declared or defined before they are used. It is not really needed for
> Kconfig. Also the following patches will rework the logic so that
> the ordering will be C-like in the end.
>
> The patch just shuffles the definitions. It should not change the existing
> behavior.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> ---
>  lib/Kconfig.debug | 112 +++++++++++++++++++++++-----------------------
>  1 file changed, 56 insertions(+), 56 deletions(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 1/6] watchdog/hardlockup: Sort hardlockup detector related config values a logical way
@ 2023-06-16 16:44     ` Doug Anderson
  0 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-16 16:44 UTC (permalink / raw)
  To: Petr Mladek
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, linux-perf-users,
	sparclinux, Andrew Morton, linuxppc-dev, David S . Miller

Hi,

On Fri, Jun 16, 2023 at 8:06 AM Petr Mladek <pmladek@suse.com> wrote:
>
> There are four possible variants of hardlockup detectors:
>
>   + buddy: available when SMP is set.
>
>   + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.
>
>   + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
>
>   + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
>         and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.
>
> Only one hardlockup detector can be compiled in. The selection is done
> using quite complex dependencies between several CONFIG variables.
> The following patches will try to make it more straightforward.
>
> As a first step, reorder the definitions of the various CONFIG variables.
> The logical order is:
>
>    1. HAVE_* variables define available variants. They are typically
>       defined in the arch/ config files.
>
>    2. HARDLOCKUP_DETECTOR y/n variable defines whether the hardlockup
>       detector is enabled at all.
>
>    3. HARDLOCKUP_DETECTOR_PREFER_BUDDY y/n variable defines whether
>       the buddy detector should be preferred over the perf one.
>       Note that the arch specific variants are always preferred when
>       available.
>
>    4. HARDLOCKUP_DETECTOR_PERF/BUDDY variables define whether the given
>       detector is enabled in the end.
>
>    5. HAVE_HARDLOCKUP_DETECTOR_NON_ARCH and HARDLOCKUP_DETECTOR_NON_ARCH
>       are temporary variables that are going to be removed in
>       a followup patch.
>
> This is a preparation step for further cleanup. It will change the logic
> without shuffling the definitions.
>
> This change temporary breaks the C-like ordering where the variables are
> declared or defined before they are used. It is not really needed for
> Kconfig. Also the following patches will rework the logic so that
> the ordering will be C-like in the end.
>
> The patch just shuffles the definitions. It should not change the existing
> behavior.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> ---
>  lib/Kconfig.debug | 112 +++++++++++++++++++++++-----------------------
>  1 file changed, 56 insertions(+), 56 deletions(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 2/6] watchdog/hardlockup: Make the config checks more straightforward
  2023-06-16 15:06   ` Petr Mladek
@ 2023-06-16 16:47     ` Doug Anderson
  -1 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-16 16:47 UTC (permalink / raw)
  To: Petr Mladek
  Cc: Andrew Morton, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	Michael Ellerman, linuxppc-dev, Christophe Leroy, sparclinux,
	David S . Miller, linux-perf-users

Hi,

On Fri, Jun 16, 2023 at 8:07 AM Petr Mladek <pmladek@suse.com> wrote:
>
> There are four possible variants of hardlockup detectors:
>
>   + buddy: available when SMP is set.
>
>   + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.
>
>   + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
>
>   + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
>         and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.
>
> The check for the sparc64 variant is more complicated because
> HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific
> and sparc64 specific variant. Therefore it is automatically
> selected with HAVE_HARDLOCKUP_DETECTOR_ARCH.
>
> This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH.
> It reduces the size of some checks but it makes them harder to follow.
>
> Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH
> is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global
> HARDLOCKUP_DETECTOR switch is enabled/disabled.
>
> Make the logic more straightforward by the following changes:
>
>   + Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and
>     HAVE_NMI_WATCHDOG in comments.
>
>   + Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate
>     HAVE_* for all four hardlockup detector variants.
>
>     Use it in the other conditions instead of SMP. It makes it
>     clear that it is about the buddy detector.
>
>   + Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR
>     and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand
>     the conditions between the four hardlockup detector variants.
>
>   + Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY
>     can be enabled. It explains the dependency on the other
>     hardlockup detector variants.
>
>     Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply".
>     It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when
>     the global HARDLOCKUP_DETECTOR switch is changed.
>
>   + Add dependency on HARDLOCKUP_DETECTOR so that the affected variables
>     disappear when the hardlockup detectors are disabled.
>
>     Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
>     value is not preserved when the global switch is disabled.
>     The user has to make the decision again when it gets re-enabled.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> ---
>  arch/Kconfig      | 23 +++++++++++++-----
>  lib/Kconfig.debug | 62 +++++++++++++++++++++++++++--------------------
>  2 files changed, 53 insertions(+), 32 deletions(-)

While I'd still paint the bikeshed a different color and organize the
dependencies a little differently, as discussed in your v1 post, this
is still OK w/ me.

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 2/6] watchdog/hardlockup: Make the config checks more straightforward
@ 2023-06-16 16:47     ` Doug Anderson
  0 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-16 16:47 UTC (permalink / raw)
  To: Petr Mladek
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, linux-perf-users,
	sparclinux, Andrew Morton, linuxppc-dev, David S . Miller

Hi,

On Fri, Jun 16, 2023 at 8:07 AM Petr Mladek <pmladek@suse.com> wrote:
>
> There are four possible variants of hardlockup detectors:
>
>   + buddy: available when SMP is set.
>
>   + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.
>
>   + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.
>
>   + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
>         and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.
>
> The check for the sparc64 variant is more complicated because
> HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific
> and sparc64 specific variant. Therefore it is automatically
> selected with HAVE_HARDLOCKUP_DETECTOR_ARCH.
>
> This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH.
> It reduces the size of some checks but it makes them harder to follow.
>
> Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH
> is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global
> HARDLOCKUP_DETECTOR switch is enabled/disabled.
>
> Make the logic more straightforward by the following changes:
>
>   + Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and
>     HAVE_NMI_WATCHDOG in comments.
>
>   + Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate
>     HAVE_* for all four hardlockup detector variants.
>
>     Use it in the other conditions instead of SMP. It makes it
>     clear that it is about the buddy detector.
>
>   + Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR
>     and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand
>     the conditions between the four hardlockup detector variants.
>
>   + Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY
>     can be enabled. It explains the dependency on the other
>     hardlockup detector variants.
>
>     Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply".
>     It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when
>     the global HARDLOCKUP_DETECTOR switch is changed.
>
>   + Add dependency on HARDLOCKUP_DETECTOR so that the affected variables
>     disappear when the hardlockup detectors are disabled.
>
>     Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
>     value is not preserved when the global switch is disabled.
>     The user has to make the decision again when it gets re-enabled.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> ---
>  arch/Kconfig      | 23 +++++++++++++-----
>  lib/Kconfig.debug | 62 +++++++++++++++++++++++++++--------------------
>  2 files changed, 53 insertions(+), 32 deletions(-)

While I'd still paint the bikeshed a different color and organize the
dependencies a little differently, as discussed in your v1 post, this
is still OK w/ me.

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 4/6] watchdog/hardlockup: Make HAVE_NMI_WATCHDOG sparc64-specific
  2023-06-16 15:06   ` Petr Mladek
@ 2023-06-16 16:48     ` Doug Anderson
  -1 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-16 16:48 UTC (permalink / raw)
  To: Petr Mladek
  Cc: Andrew Morton, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	Michael Ellerman, linuxppc-dev, Christophe Leroy, sparclinux,
	David S . Miller, linux-perf-users

Hi,

On Fri, Jun 16, 2023 at 8:07 AM Petr Mladek <pmladek@suse.com> wrote:
>
> There are several hardlockup detector implementations and several Kconfig
> values which allow selection and build of the preferred one.
>
> CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb
> ("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
> It was a preparation step for introducing the new generic perf hardlockup
> detector.
>
> The existing arch-specific variants did not support the to-be-created
> generic build configurations, sysctl interface, etc. This distinction
> was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog:
> Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
> in v2.6.38.
>
> CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105
> ("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
> the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
> by three architectures, namely blackfin, mn10300, and sparc.
>
> The support for blackfin and mn10300 architectures has been completely
> dropped some time ago. And sparc is the only architecture with the historic
> NMI watchdog at the moment.
>
> And the old sparc implementation is really special. It is always built on
> sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b
> ("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
> in v4.10-rc1.
>
> There are only few locations where the sparc64 NMI watchdog interacts
> with the generic hardlockup detectors code:
>
>   + implements arch_touch_nmi_watchdog() which is called from the generic
>     touch_nmi_watchdog()
>
>   + implements watchdog_hardlockup_enable()/disable() to support
>     /proc/sys/kernel/nmi_watchdog
>
>   + is always preferred over other generic watchdogs, see
>     CONFIG_HARDLOCKUP_DETECTOR
>
>   + includes asm/nmi.h into linux/nmi.h because some sparc-specific
>     functions are needed in sparc-specific code which includes
>     only linux/nmi.h.
>
> The situation became more complicated after the commit 05a4a95279311c3
> ("kernel/watchdog: split up config options") and commit 2104180a53698df5
> ("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
> They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
> specific hardlockup detector. It was compatible with the perf one
> regarding the general boot, sysctl, and programming interfaces.
>
> HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
> HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
> detectors had some common requirements, namely:
>
>   + implemented arch_touch_nmi_watchdog()
>   + included asm/nmi.h into linux/nmi.h
>   + defined the default value for /proc/sys/kernel/nmi_watchdog
>
> But it actually has made things pretty complicated when the generic
> buddy hardlockup detector was added. Before the generic perf detector
> was newer supported together with an arch-specific one. But the buddy
> detector could work on any SMP system. It means that an architecture
> could support both the arch-specific and buddy detector.
>
> As a result, there are few tricky dependencies. For example,
> CONFIG_HARDLOCKUP_DETECTOR depends on:
>
>   ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
>
> The problem is that the very special sparc implementation is defined as:
>
>   HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH
>
> Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
> without reading understanding the history.
>
> Make the logic less tricky and more self-explanatory by making
> HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
> HAVE_HARDLOCKUP_DETECTOR_SPARC64.
>
> Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
> and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
> HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
> and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
>
> watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64
>
> The configuration variable HAVE_NMI_WATCHDOG has a generic name but
> it is selected only for SPARC64.
>
> It should _not_ be used in general because it is not integrated with
> the other hardlockup detectors. Namely, it does not support the hardlockup
> specific command line parameters and systcl interface. Instead, it is
> enabled/disabled together with the softlockup detector by the global
> "watchdog" sysctl.
>
> Rename it to HAVE_HARDLOCKUP_WATCHDOG_SPARC64 to make the special
> behavior more clear.
>
> Also the variable is set only on sparc64. Move the definition
> from arch/Kconfig to arch/sparc/Kconfig.debug.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>

I think you goofed up when squashing the patches. You've now got a
second patch subject after your first Signed-off-by and then a second
Signed-off-by... I assume everything after the first Signed-off-by
should be dropped?

Other than that:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 4/6] watchdog/hardlockup: Make HAVE_NMI_WATCHDOG sparc64-specific
@ 2023-06-16 16:48     ` Doug Anderson
  0 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-16 16:48 UTC (permalink / raw)
  To: Petr Mladek
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, linux-perf-users,
	sparclinux, Andrew Morton, linuxppc-dev, David S . Miller

Hi,

On Fri, Jun 16, 2023 at 8:07 AM Petr Mladek <pmladek@suse.com> wrote:
>
> There are several hardlockup detector implementations and several Kconfig
> values which allow selection and build of the preferred one.
>
> CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb
> ("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
> It was a preparation step for introducing the new generic perf hardlockup
> detector.
>
> The existing arch-specific variants did not support the to-be-created
> generic build configurations, sysctl interface, etc. This distinction
> was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog:
> Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
> in v2.6.38.
>
> CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105
> ("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
> the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
> by three architectures, namely blackfin, mn10300, and sparc.
>
> The support for blackfin and mn10300 architectures has been completely
> dropped some time ago. And sparc is the only architecture with the historic
> NMI watchdog at the moment.
>
> And the old sparc implementation is really special. It is always built on
> sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b
> ("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
> in v4.10-rc1.
>
> There are only few locations where the sparc64 NMI watchdog interacts
> with the generic hardlockup detectors code:
>
>   + implements arch_touch_nmi_watchdog() which is called from the generic
>     touch_nmi_watchdog()
>
>   + implements watchdog_hardlockup_enable()/disable() to support
>     /proc/sys/kernel/nmi_watchdog
>
>   + is always preferred over other generic watchdogs, see
>     CONFIG_HARDLOCKUP_DETECTOR
>
>   + includes asm/nmi.h into linux/nmi.h because some sparc-specific
>     functions are needed in sparc-specific code which includes
>     only linux/nmi.h.
>
> The situation became more complicated after the commit 05a4a95279311c3
> ("kernel/watchdog: split up config options") and commit 2104180a53698df5
> ("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
> They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
> specific hardlockup detector. It was compatible with the perf one
> regarding the general boot, sysctl, and programming interfaces.
>
> HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
> HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
> detectors had some common requirements, namely:
>
>   + implemented arch_touch_nmi_watchdog()
>   + included asm/nmi.h into linux/nmi.h
>   + defined the default value for /proc/sys/kernel/nmi_watchdog
>
> But it actually has made things pretty complicated when the generic
> buddy hardlockup detector was added. Before the generic perf detector
> was newer supported together with an arch-specific one. But the buddy
> detector could work on any SMP system. It means that an architecture
> could support both the arch-specific and buddy detector.
>
> As a result, there are few tricky dependencies. For example,
> CONFIG_HARDLOCKUP_DETECTOR depends on:
>
>   ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
>
> The problem is that the very special sparc implementation is defined as:
>
>   HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH
>
> Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
> without reading understanding the history.
>
> Make the logic less tricky and more self-explanatory by making
> HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
> HAVE_HARDLOCKUP_DETECTOR_SPARC64.
>
> Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
> and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
> HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
> and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
>
> watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64
>
> The configuration variable HAVE_NMI_WATCHDOG has a generic name but
> it is selected only for SPARC64.
>
> It should _not_ be used in general because it is not integrated with
> the other hardlockup detectors. Namely, it does not support the hardlockup
> specific command line parameters and systcl interface. Instead, it is
> enabled/disabled together with the softlockup detector by the global
> "watchdog" sysctl.
>
> Rename it to HAVE_HARDLOCKUP_WATCHDOG_SPARC64 to make the special
> behavior more clear.
>
> Also the variable is set only on sparc64. Move the definition
> from arch/Kconfig to arch/sparc/Kconfig.debug.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>

I think you goofed up when squashing the patches. You've now got a
second patch subject after your first Signed-off-by and then a second
Signed-off-by... I assume everything after the first Signed-off-by
should be dropped?

Other than that:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 4/6] watchdog/hardlockup: Make HAVE_NMI_WATCHDOG sparc64-specific
  2023-06-16 16:48     ` Doug Anderson
@ 2023-06-19  9:55       ` Petr Mladek
  -1 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-19  9:55 UTC (permalink / raw)
  To: Doug Anderson
  Cc: Andrew Morton, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	Michael Ellerman, linuxppc-dev, Christophe Leroy, sparclinux,
	David S . Miller, linux-perf-users

On Fri 2023-06-16 09:48:06, Doug Anderson wrote:
> Hi,
> 
> On Fri, Jun 16, 2023 at 8:07 AM Petr Mladek <pmladek@suse.com> wrote:
> >
> > There are several hardlockup detector implementations and several Kconfig
> > values which allow selection and build of the preferred one.
[...]
> > Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
> > and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
> > HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
> > and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> >
> > watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64
[...]
> > Also the variable is set only on sparc64. Move the definition
> > from arch/Kconfig to arch/sparc/Kconfig.debug.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> 
> I think you goofed up when squashing the patches. You've now got a
> second patch subject after your first Signed-off-by and then a second
> Signed-off-by... I assume everything after the first Signed-off-by
> should be dropped?

Ah, you are right. It seems that Andrew has fixed this when taking
the patch.

Thank you both,
Petr

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 4/6] watchdog/hardlockup: Make HAVE_NMI_WATCHDOG sparc64-specific
@ 2023-06-19  9:55       ` Petr Mladek
  0 siblings, 0 replies; 36+ messages in thread
From: Petr Mladek @ 2023-06-19  9:55 UTC (permalink / raw)
  To: Doug Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, linux-perf-users,
	sparclinux, Andrew Morton, linuxppc-dev, David S . Miller

On Fri 2023-06-16 09:48:06, Doug Anderson wrote:
> Hi,
> 
> On Fri, Jun 16, 2023 at 8:07 AM Petr Mladek <pmladek@suse.com> wrote:
> >
> > There are several hardlockup detector implementations and several Kconfig
> > values which allow selection and build of the preferred one.
[...]
> > Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
> > and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
> > HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
> > and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> >
> > watchdog/sparc64: Rename HAVE_NMI_WATCHDOG to HAVE_HARDLOCKUP_WATCHDOG_SPARC64
[...]
> > Also the variable is set only on sparc64. Move the definition
> > from arch/Kconfig to arch/sparc/Kconfig.debug.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> 
> I think you goofed up when squashing the patches. You've now got a
> second patch subject after your first Signed-off-by and then a second
> Signed-off-by... I assume everything after the first Signed-off-by
> should be dropped?

Ah, you are right. It seems that Andrew has fixed this when taking
the patch.

Thank you both,
Petr

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
  2023-06-16 15:06   ` Petr Mladek
@ 2023-06-21 13:08     ` Michael Ellerman
  -1 siblings, 0 replies; 36+ messages in thread
From: Michael Ellerman @ 2023-06-21 13:08 UTC (permalink / raw)
  To: Petr Mladek, Andrew Morton, Douglas Anderson
  Cc: kgdb-bugreport, linux-kernel, Nicholas Piggin, linuxppc-dev,
	Christophe Leroy, sparclinux, David S . Miller, linux-perf-users,
	Petr Mladek

Petr Mladek <pmladek@suse.com> writes:
> The HAVE_ prefix means that the code could be enabled. Add another
> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> It will be set when it should be built. It will make it compatible
> with the other hardlockup detectors.
>
> The change allows to clean up dependencies of PPC_WATCHDOG
> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
>
> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> on arm, x86, powerpc architectures.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>  arch/powerpc/Kconfig | 5 ++---
>  include/linux/nmi.h  | 2 +-
>  lib/Kconfig.debug    | 9 +++++++++
>  3 files changed, 12 insertions(+), 4 deletions(-)

Something in this patch is breaking the powerpc g5_defconfig, I don't
immediately see what though.

../arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
../arch/powerpc/kernel/stacktrace.c:171:9: error: implicit declaration of function ‘nmi_cpu_backtrace’ [-Werror=implicit-function-declaration]
  171 |         nmi_cpu_backtrace(regs);
      |         ^~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
../arch/powerpc/kernel/stacktrace.c:226:9: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’; did you mean ‘arch_trigger_cpumask_backtrace’? [-Werror=implicit-function-declaration]
  226 |         nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |         arch_trigger_cpumask_backtrace
cc1: all warnings being treated as errors


cheers

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
@ 2023-06-21 13:08     ` Michael Ellerman
  0 siblings, 0 replies; 36+ messages in thread
From: Michael Ellerman @ 2023-06-21 13:08 UTC (permalink / raw)
  To: Petr Mladek, Andrew Morton, Douglas Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, linux-perf-users,
	Nicholas Piggin, sparclinux, linuxppc-dev, David S . Miller

Petr Mladek <pmladek@suse.com> writes:
> The HAVE_ prefix means that the code could be enabled. Add another
> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> It will be set when it should be built. It will make it compatible
> with the other hardlockup detectors.
>
> The change allows to clean up dependencies of PPC_WATCHDOG
> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
>
> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> on arm, x86, powerpc architectures.
>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>  arch/powerpc/Kconfig | 5 ++---
>  include/linux/nmi.h  | 2 +-
>  lib/Kconfig.debug    | 9 +++++++++
>  3 files changed, 12 insertions(+), 4 deletions(-)

Something in this patch is breaking the powerpc g5_defconfig, I don't
immediately see what though.

../arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
../arch/powerpc/kernel/stacktrace.c:171:9: error: implicit declaration of function ‘nmi_cpu_backtrace’ [-Werror=implicit-function-declaration]
  171 |         nmi_cpu_backtrace(regs);
      |         ^~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
../arch/powerpc/kernel/stacktrace.c:226:9: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’; did you mean ‘arch_trigger_cpumask_backtrace’? [-Werror=implicit-function-declaration]
  226 |         nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |         arch_trigger_cpumask_backtrace
cc1: all warnings being treated as errors


cheers

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
  2023-06-21 13:08     ` Michael Ellerman
@ 2023-06-21 23:50       ` Doug Anderson
  -1 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-21 23:50 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: Petr Mladek, Andrew Morton, kgdb-bugreport, linux-kernel,
	Nicholas Piggin, linuxppc-dev, Christophe Leroy, sparclinux,
	David S . Miller, linux-perf-users

Hi,

On Wed, Jun 21, 2023 at 6:08 AM Michael Ellerman <mpe@ellerman.id.au> wrote:
>
> Petr Mladek <pmladek@suse.com> writes:
> > The HAVE_ prefix means that the code could be enabled. Add another
> > variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> > It will be set when it should be built. It will make it compatible
> > with the other hardlockup detectors.
> >
> > The change allows to clean up dependencies of PPC_WATCHDOG
> > and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
> >
> > As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> > on arm, x86, powerpc architectures.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > ---
> >  arch/powerpc/Kconfig | 5 ++---
> >  include/linux/nmi.h  | 2 +-
> >  lib/Kconfig.debug    | 9 +++++++++
> >  3 files changed, 12 insertions(+), 4 deletions(-)
>
> Something in this patch is breaking the powerpc g5_defconfig, I don't
> immediately see what though.
>
> ../arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
> ../arch/powerpc/kernel/stacktrace.c:171:9: error: implicit declaration of function ‘nmi_cpu_backtrace’ [-Werror=implicit-function-declaration]
>   171 |         nmi_cpu_backtrace(regs);
>       |         ^~~~~~~~~~~~~~~~~
> ../arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
> ../arch/powerpc/kernel/stacktrace.c:226:9: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’; did you mean ‘arch_trigger_cpumask_backtrace’? [-Werror=implicit-function-declaration]
>   226 |         nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
>       |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>       |         arch_trigger_cpumask_backtrace
> cc1: all warnings being treated as errors

Yeah, I can reproduce that.

The problem is that before ${SUBJECT} patch "include/linux/nmi.h"
would include <asm/nmi.h>. Now it won't.

There are a ton of different ways to fix this, but I think the one
that makes sense is to be consistent with other architectures and move
the "arch_trigger_cpumask_backtrace" definitions to asm/irq.h.

https://lore.kernel.org/r/20230621164809.1.Ice67126857506712559078e7de26d32d26e64631@changeid

-Doug

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
@ 2023-06-21 23:50       ` Doug Anderson
  0 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-06-21 23:50 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	linux-perf-users, sparclinux, Andrew Morton, linuxppc-dev,
	David S . Miller

Hi,

On Wed, Jun 21, 2023 at 6:08 AM Michael Ellerman <mpe@ellerman.id.au> wrote:
>
> Petr Mladek <pmladek@suse.com> writes:
> > The HAVE_ prefix means that the code could be enabled. Add another
> > variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> > It will be set when it should be built. It will make it compatible
> > with the other hardlockup detectors.
> >
> > The change allows to clean up dependencies of PPC_WATCHDOG
> > and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
> >
> > As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> > on arm, x86, powerpc architectures.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > ---
> >  arch/powerpc/Kconfig | 5 ++---
> >  include/linux/nmi.h  | 2 +-
> >  lib/Kconfig.debug    | 9 +++++++++
> >  3 files changed, 12 insertions(+), 4 deletions(-)
>
> Something in this patch is breaking the powerpc g5_defconfig, I don't
> immediately see what though.
>
> ../arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
> ../arch/powerpc/kernel/stacktrace.c:171:9: error: implicit declaration of function ‘nmi_cpu_backtrace’ [-Werror=implicit-function-declaration]
>   171 |         nmi_cpu_backtrace(regs);
>       |         ^~~~~~~~~~~~~~~~~
> ../arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
> ../arch/powerpc/kernel/stacktrace.c:226:9: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’; did you mean ‘arch_trigger_cpumask_backtrace’? [-Werror=implicit-function-declaration]
>   226 |         nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
>       |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>       |         arch_trigger_cpumask_backtrace
> cc1: all warnings being treated as errors

Yeah, I can reproduce that.

The problem is that before ${SUBJECT} patch "include/linux/nmi.h"
would include <asm/nmi.h>. Now it won't.

There are a ton of different ways to fix this, but I think the one
that makes sense is to be consistent with other architectures and move
the "arch_trigger_cpumask_backtrace" definitions to asm/irq.h.

https://lore.kernel.org/r/20230621164809.1.Ice67126857506712559078e7de26d32d26e64631@changeid

-Doug

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
  2023-06-16 15:06   ` Petr Mladek
@ 2023-07-01 14:40     ` Guenter Roeck
  -1 siblings, 0 replies; 36+ messages in thread
From: Guenter Roeck @ 2023-07-01 14:40 UTC (permalink / raw)
  To: Petr Mladek
  Cc: Andrew Morton, Douglas Anderson, kgdb-bugreport, linux-kernel,
	linux-perf-users, Nicholas Piggin, sparclinux, linuxppc-dev,
	David S . Miller

On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
> The HAVE_ prefix means that the code could be enabled. Add another
> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> It will be set when it should be built. It will make it compatible
> with the other hardlockup detectors.
> 
> The change allows to clean up dependencies of PPC_WATCHDOG
> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
> 
> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> on arm, x86, powerpc architectures.
> 
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
...
> --- a/include/linux/nmi.h
> +++ b/include/linux/nmi.h
> @@ -9,7 +9,7 @@
>  #include <asm/irq.h>
>  
>  /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
> -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
> +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)

This results in:

arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
  753 |                 watchdog_hardlockup_set_timeout_pct(factor);

with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy 
for watchdog_hardlockup_set_timeout_pct() is still defined in
arch/powerpc/include/asm/nmi.h which is no longer included.

Guenter

>  #include <asm/nmi.h>
>  #endif
>  

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
@ 2023-07-01 14:40     ` Guenter Roeck
  0 siblings, 0 replies; 36+ messages in thread
From: Guenter Roeck @ 2023-07-01 14:40 UTC (permalink / raw)
  To: Petr Mladek
  Cc: kgdb-bugreport, Douglas Anderson, Nicholas Piggin, linux-kernel,
	linux-perf-users, sparclinux, Andrew Morton, linuxppc-dev,
	David S . Miller

On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
> The HAVE_ prefix means that the code could be enabled. Add another
> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> It will be set when it should be built. It will make it compatible
> with the other hardlockup detectors.
> 
> The change allows to clean up dependencies of PPC_WATCHDOG
> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
> 
> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> on arm, x86, powerpc architectures.
> 
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
...
> --- a/include/linux/nmi.h
> +++ b/include/linux/nmi.h
> @@ -9,7 +9,7 @@
>  #include <asm/irq.h>
>  
>  /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
> -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
> +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)

This results in:

arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
  753 |                 watchdog_hardlockup_set_timeout_pct(factor);

with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy 
for watchdog_hardlockup_set_timeout_pct() is still defined in
arch/powerpc/include/asm/nmi.h which is no longer included.

Guenter

>  #include <asm/nmi.h>
>  #endif
>  

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
  2023-07-01 14:40     ` Guenter Roeck
@ 2023-07-01 16:08       ` Doug Anderson
  -1 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-07-01 16:08 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Petr Mladek, Andrew Morton, kgdb-bugreport, linux-kernel,
	linux-perf-users, Nicholas Piggin, sparclinux, linuxppc-dev,
	David S . Miller

Hi,

On Sat, Jul 1, 2023 at 7:40 AM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
> > The HAVE_ prefix means that the code could be enabled. Add another
> > variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> > It will be set when it should be built. It will make it compatible
> > with the other hardlockup detectors.
> >
> > The change allows to clean up dependencies of PPC_WATCHDOG
> > and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
> >
> > As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> > on arm, x86, powerpc architectures.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > ---
> ...
> > --- a/include/linux/nmi.h
> > +++ b/include/linux/nmi.h
> > @@ -9,7 +9,7 @@
> >  #include <asm/irq.h>
> >
> >  /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
> > -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
> > +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>
> This results in:
>
> arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
> arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
>   753 |                 watchdog_hardlockup_set_timeout_pct(factor);
>
> with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy
> for watchdog_hardlockup_set_timeout_pct() is still defined in
> arch/powerpc/include/asm/nmi.h which is no longer included.

Can you test with:

https://lore.kernel.org/r/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid

Thanks!

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
@ 2023-07-01 16:08       ` Doug Anderson
  0 siblings, 0 replies; 36+ messages in thread
From: Doug Anderson @ 2023-07-01 16:08 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	linux-perf-users, sparclinux, Andrew Morton, linuxppc-dev,
	David S . Miller

Hi,

On Sat, Jul 1, 2023 at 7:40 AM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
> > The HAVE_ prefix means that the code could be enabled. Add another
> > variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
> > It will be set when it should be built. It will make it compatible
> > with the other hardlockup detectors.
> >
> > The change allows to clean up dependencies of PPC_WATCHDOG
> > and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
> >
> > As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
> > on arm, x86, powerpc architectures.
> >
> > Signed-off-by: Petr Mladek <pmladek@suse.com>
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > ---
> ...
> > --- a/include/linux/nmi.h
> > +++ b/include/linux/nmi.h
> > @@ -9,7 +9,7 @@
> >  #include <asm/irq.h>
> >
> >  /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
> > -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
> > +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>
> This results in:
>
> arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
> arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
>   753 |                 watchdog_hardlockup_set_timeout_pct(factor);
>
> with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy
> for watchdog_hardlockup_set_timeout_pct() is still defined in
> arch/powerpc/include/asm/nmi.h which is no longer included.

Can you test with:

https://lore.kernel.org/r/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid

Thanks!

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
  2023-07-01 16:08       ` Doug Anderson
@ 2023-07-01 16:22         ` Guenter Roeck
  -1 siblings, 0 replies; 36+ messages in thread
From: Guenter Roeck @ 2023-07-01 16:22 UTC (permalink / raw)
  To: Doug Anderson
  Cc: Petr Mladek, Andrew Morton, kgdb-bugreport, linux-kernel,
	linux-perf-users, Nicholas Piggin, sparclinux, linuxppc-dev,
	David S . Miller

On 7/1/23 09:08, Doug Anderson wrote:
> Hi,
> 
> On Sat, Jul 1, 2023 at 7:40 AM Guenter Roeck <linux@roeck-us.net> wrote:
>>
>> On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
>>> The HAVE_ prefix means that the code could be enabled. Add another
>>> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
>>> It will be set when it should be built. It will make it compatible
>>> with the other hardlockup detectors.
>>>
>>> The change allows to clean up dependencies of PPC_WATCHDOG
>>> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
>>>
>>> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
>>> on arm, x86, powerpc architectures.
>>>
>>> Signed-off-by: Petr Mladek <pmladek@suse.com>
>>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>>> ---
>> ...
>>> --- a/include/linux/nmi.h
>>> +++ b/include/linux/nmi.h
>>> @@ -9,7 +9,7 @@
>>>   #include <asm/irq.h>
>>>
>>>   /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
>>> -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>> +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>
>> This results in:
>>
>> arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
>> arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
>>    753 |                 watchdog_hardlockup_set_timeout_pct(factor);
>>
>> with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy
>> for watchdog_hardlockup_set_timeout_pct() is still defined in
>> arch/powerpc/include/asm/nmi.h which is no longer included.
> 
> Can you test with:
> 
> https://lore.kernel.org/r/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid
> 

Ah, I didn't find that one. Sorry for the noise.

Yes, that should work. It is a bit odd that including both linux/nmi.h
and asm/nmi.h is required, but as it turns out that is actually quite common.

Thanks,
Guenter


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
@ 2023-07-01 16:22         ` Guenter Roeck
  0 siblings, 0 replies; 36+ messages in thread
From: Guenter Roeck @ 2023-07-01 16:22 UTC (permalink / raw)
  To: Doug Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	linux-perf-users, sparclinux, Andrew Morton, linuxppc-dev,
	David S . Miller

On 7/1/23 09:08, Doug Anderson wrote:
> Hi,
> 
> On Sat, Jul 1, 2023 at 7:40 AM Guenter Roeck <linux@roeck-us.net> wrote:
>>
>> On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
>>> The HAVE_ prefix means that the code could be enabled. Add another
>>> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
>>> It will be set when it should be built. It will make it compatible
>>> with the other hardlockup detectors.
>>>
>>> The change allows to clean up dependencies of PPC_WATCHDOG
>>> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
>>>
>>> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
>>> on arm, x86, powerpc architectures.
>>>
>>> Signed-off-by: Petr Mladek <pmladek@suse.com>
>>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>>> ---
>> ...
>>> --- a/include/linux/nmi.h
>>> +++ b/include/linux/nmi.h
>>> @@ -9,7 +9,7 @@
>>>   #include <asm/irq.h>
>>>
>>>   /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
>>> -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>> +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>
>> This results in:
>>
>> arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
>> arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
>>    753 |                 watchdog_hardlockup_set_timeout_pct(factor);
>>
>> with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy
>> for watchdog_hardlockup_set_timeout_pct() is still defined in
>> arch/powerpc/include/asm/nmi.h which is no longer included.
> 
> Can you test with:
> 
> https://lore.kernel.org/r/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid
> 

Ah, I didn't find that one. Sorry for the noise.

Yes, that should work. It is a bit odd that including both linux/nmi.h
and asm/nmi.h is required, but as it turns out that is actually quite common.

Thanks,
Guenter


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
  2023-07-01 16:08       ` Doug Anderson
@ 2023-07-02  3:03         ` Guenter Roeck
  -1 siblings, 0 replies; 36+ messages in thread
From: Guenter Roeck @ 2023-07-02  3:03 UTC (permalink / raw)
  To: Doug Anderson
  Cc: Petr Mladek, Andrew Morton, kgdb-bugreport, linux-kernel,
	linux-perf-users, Nicholas Piggin, sparclinux, linuxppc-dev,
	David S . Miller

On 7/1/23 09:08, Doug Anderson wrote:
> Hi,
> 
> On Sat, Jul 1, 2023 at 7:40 AM Guenter Roeck <linux@roeck-us.net> wrote:
>>
>> On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
>>> The HAVE_ prefix means that the code could be enabled. Add another
>>> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
>>> It will be set when it should be built. It will make it compatible
>>> with the other hardlockup detectors.
>>>
>>> The change allows to clean up dependencies of PPC_WATCHDOG
>>> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
>>>
>>> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
>>> on arm, x86, powerpc architectures.
>>>
>>> Signed-off-by: Petr Mladek <pmladek@suse.com>
>>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>>> ---
>> ...
>>> --- a/include/linux/nmi.h
>>> +++ b/include/linux/nmi.h
>>> @@ -9,7 +9,7 @@
>>>   #include <asm/irq.h>
>>>
>>>   /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
>>> -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>> +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>
>> This results in:
>>
>> arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
>> arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
>>    753 |                 watchdog_hardlockup_set_timeout_pct(factor);
>>
>> with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy
>> for watchdog_hardlockup_set_timeout_pct() is still defined in
>> arch/powerpc/include/asm/nmi.h which is no longer included.
> 
> Can you test with:
> 
> https://lore.kernel.org/r/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid
> 

Sorry for the noise. I didn't find that one.

Yes, that should work. It is a bit odd that including both linux/nmi.h
and asm/nmi.h is required, but as it turns out that is actually quite common.

Thanks,
Guenter



^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH
@ 2023-07-02  3:03         ` Guenter Roeck
  0 siblings, 0 replies; 36+ messages in thread
From: Guenter Roeck @ 2023-07-02  3:03 UTC (permalink / raw)
  To: Doug Anderson
  Cc: Petr Mladek, kgdb-bugreport, linux-kernel, Nicholas Piggin,
	linux-perf-users, sparclinux, Andrew Morton, linuxppc-dev,
	David S . Miller

On 7/1/23 09:08, Doug Anderson wrote:
> Hi,
> 
> On Sat, Jul 1, 2023 at 7:40 AM Guenter Roeck <linux@roeck-us.net> wrote:
>>
>> On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
>>> The HAVE_ prefix means that the code could be enabled. Add another
>>> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
>>> It will be set when it should be built. It will make it compatible
>>> with the other hardlockup detectors.
>>>
>>> The change allows to clean up dependencies of PPC_WATCHDOG
>>> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
>>>
>>> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
>>> on arm, x86, powerpc architectures.
>>>
>>> Signed-off-by: Petr Mladek <pmladek@suse.com>
>>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>>> ---
>> ...
>>> --- a/include/linux/nmi.h
>>> +++ b/include/linux/nmi.h
>>> @@ -9,7 +9,7 @@
>>>   #include <asm/irq.h>
>>>
>>>   /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
>>> -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>> +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>
>> This results in:
>>
>> arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
>> arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
>>    753 |                 watchdog_hardlockup_set_timeout_pct(factor);
>>
>> with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy
>> for watchdog_hardlockup_set_timeout_pct() is still defined in
>> arch/powerpc/include/asm/nmi.h which is no longer included.
> 
> Can you test with:
> 
> https://lore.kernel.org/r/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid
> 

Sorry for the noise. I didn't find that one.

Yes, that should work. It is a bit odd that including both linux/nmi.h
and asm/nmi.h is required, but as it turns out that is actually quite common.

Thanks,
Guenter



^ permalink raw reply	[flat|nested] 36+ messages in thread

end of thread, other threads:[~2023-07-02  3:04 UTC | newest]

Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-16 15:06 [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors Petr Mladek
2023-06-16 15:06 ` Petr Mladek
2023-06-16 15:06 ` [PATCH v2 1/6] watchdog/hardlockup: Sort hardlockup detector related config values a logical way Petr Mladek
2023-06-16 15:06   ` Petr Mladek
2023-06-16 16:44   ` Doug Anderson
2023-06-16 16:44     ` Doug Anderson
2023-06-16 15:06 ` [PATCH v2 2/6] watchdog/hardlockup: Make the config checks more straightforward Petr Mladek
2023-06-16 15:06   ` Petr Mladek
2023-06-16 16:47   ` Doug Anderson
2023-06-16 16:47     ` Doug Anderson
2023-06-16 15:06 ` [PATCH v2 3/6] watchdog/hardlockup: Declare arch_touch_nmi_watchdog() only in linux/nmi.h Petr Mladek
2023-06-16 15:06   ` Petr Mladek
2023-06-16 15:06 ` [PATCH v2 4/6] watchdog/hardlockup: Make HAVE_NMI_WATCHDOG sparc64-specific Petr Mladek
2023-06-16 15:06   ` Petr Mladek
2023-06-16 16:48   ` Doug Anderson
2023-06-16 16:48     ` Doug Anderson
2023-06-19  9:55     ` Petr Mladek
2023-06-19  9:55       ` Petr Mladek
2023-06-16 15:06 ` [PATCH v2 5/6] watchdog/sparc64: Define HARDLOCKUP_DETECTOR_SPARC64 Petr Mladek
2023-06-16 15:06   ` Petr Mladek
2023-06-16 15:06 ` [PATCH v2 6/6] watchdog/hardlockup: Define HARDLOCKUP_DETECTOR_ARCH Petr Mladek
2023-06-16 15:06   ` Petr Mladek
2023-06-21 13:08   ` Michael Ellerman
2023-06-21 13:08     ` Michael Ellerman
2023-06-21 23:50     ` Doug Anderson
2023-06-21 23:50       ` Doug Anderson
2023-07-01 14:40   ` Guenter Roeck
2023-07-01 14:40     ` Guenter Roeck
2023-07-01 16:08     ` Doug Anderson
2023-07-01 16:08       ` Doug Anderson
2023-07-01 16:22       ` Guenter Roeck
2023-07-01 16:22         ` Guenter Roeck
2023-07-02  3:03       ` Guenter Roeck
2023-07-02  3:03         ` Guenter Roeck
2023-06-16 15:21 ` [PATCH v2 0/6] watchdog/hardlockup: Cleanup configuration of hardlockup detectors Petr Mladek
2023-06-16 15:21   ` Petr Mladek

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.