[PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180

[PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180

[Rajendra Nayak]

Add new qup functions for qup02/04/11 and qup13 wherein multiple
functions (for i2c and uart) share the same pin. This allows users
to identify which specific qup function for the instance one needs
to use for the pin.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
index b5767ee..6ffeac9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
@@ -125,8 +125,9 @@ to specify in a pin configuration subnode:
 		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
 		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
 		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
-		    qspi_data, qup00, qup01, qup02, qup03, qup04, qup05,
-		    qup10, qup11, qup12, qup13, qup14, qup15, sdc1_tb,
+		    qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03,
+		    qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart,
+		    qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb,
 		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
 		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
 		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180

[Bjorn Andersson]

On Tue 10 Dec 21:24 PST 2019, Rajendra Nayak wrote:

> Add new qup functions for qup02/04/11 and qup13 wherein multiple
> functions (for i2c and uart) share the same pin. This allows users
> to identify which specific qup function for the instance one needs
> to use for the pin.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
> index b5767ee..6ffeac9 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
> @@ -125,8 +125,9 @@ to specify in a pin configuration subnode:
>  		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
>  		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
>  		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
> -		    qspi_data, qup00, qup01, qup02, qup03, qup04, qup05,
> -		    qup10, qup11, qup12, qup13, qup14, qup15, sdc1_tb,
> +		    qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03,
> +		    qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart,
> +		    qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb,
>  		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
>  		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
>  		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180

[Stephen Boyd]

Quoting Rajendra Nayak (2019-12-10 21:24:24)
> Add new qup functions for qup02/04/11 and qup13 wherein multiple
> functions (for i2c and uart) share the same pin. This allows users
> to identify which specific qup function for the instance one needs
> to use for the pin.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180

[Doug Anderson]

Hi,

On Tue, Dec 10, 2019 at 9:24 PM Rajendra Nayak <rnayak@codeaurora.org> wrote:
>
> Add new qup functions for qup02/04/11 and qup13 wherein multiple
> functions (for i2c and uart) share the same pin. This allows users
> to identify which specific qup function for the instance one needs
> to use for the pin.
>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180

[Linus Walleij]

On Wed, Dec 11, 2019 at 6:24 AM Rajendra Nayak <rnayak@codeaurora.org> wrote:

> Add new qup functions for qup02/04/11 and qup13 wherein multiple
> functions (for i2c and uart) share the same pin. This allows users
> to identify which specific qup function for the instance one needs
> to use for the pin.
>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>

Patch applied for v5.6 with the ACKs.

Yours,
Linus Walleij