(no subject)

[Robert Kaiser]

On Thu Jan 18 16:30:30 2001 steve@navaho.co.uk wrote
> Has anyone had any luck getting a 2.4 kernel to run on Cobalt x86
> hardware?  It doesn't even seem to start (I get nothing on the screen from
>t he kernel, it just sits there and does nothing). :(

What processor does it use ? (386 or 486 perchance?)



----------------------------------------------------------------
Robert Kaiser                         email: rkaiser@sysgo.de
SYSGO RTS GmbH
Am Pfaffenstein 14                    phone: (49) 6136 9948-762
D-55270 Klein-Winternheim / Germany   fax:   (49) 6136 9948-10
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re:

[Michael Rothwell]

Robert Kaiser wrote:
> 
> On Thu Jan 18 16:30:30 2001 steve@navaho.co.uk wrote
> > Has anyone had any luck getting a 2.4 kernel to run on Cobalt x86
> > hardware?  It doesn't even seem to start (I get nothing on the screen from
> >t he kernel, it just sits there and does nothing). :(
> 
> What processor does it use ? (386 or 486 perchance?)

AMD K6. New ones will use Athlon.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: your mail

[Steve Hill]

On Fri, 19 Jan 2001, RobertKaiser wrote:

> On Thu Jan 18 16:30:30 2001 steve@navaho.co.uk wrote
> > Has anyone had any luck getting a 2.4 kernel to run on Cobalt x86
> > hardware?  It doesn't even seem to start (I get nothing on the screen from
> >t he kernel, it just sits there and does nothing). :(
> 
> What processor does it use ? (386 or 486 perchance?)

AMD K6 (so 586) - I was trying the i386 version of the kernel on it
though, if that's going to be a problem, I can try the 586 version...

-- 

- Steve Hill
System Administrator         Email: steve@navaho.co.uk
Navaho Technologies Ltd.       Tel: +44-870-7034015

        ... Alcohol and calculus don't mix - Don't drink and derive! ...


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: 2.4 on Cobalt hardware

[Robert Kaiser]

On Fre, 19 Jan 2001 you wrote:
> On Fri, 19 Jan 2001, RobertKaiser wrote:
> 
> > On Thu Jan 18 16:30:30 2001 steve@navaho.co.uk wrote
> > > Has anyone had any luck getting a 2.4 kernel to run on Cobalt x86
> > > hardware?  It doesn't even seem to start (I get nothing on the screen from
> > >t he kernel, it just sits there and does nothing). :(
> > 
> > What processor does it use ? (386 or 486 perchance?)
> 
> AMD K6 (so 586) - I was trying the i386 version of the kernel on it
> though, if that's going to be a problem, I can try the 586 version...

I was asking because the 2.4.0 kernel has a bug that causes it to fail on
386 and 486 CPUs with the same symptoms as you described. I don't know
much about the K6, so I can't tell whether it will fall into the same trap (I
guess it won't).

Nevertheless, if you want to be sure, try the latest (pre8) patch from

  ftp://ftp.kernel.org/pub/linux/kernel/testing/

that particular bug has been fixed in that version.

Good Luck

Rob

----------------------------------------------------------------
Robert Kaiser                         email: rkaiser@sysgo.de
SYSGO RTS GmbH
Am Pfaffenstein 14                    phone: (49) 6136 9948-762
D-55270 Klein-Winternheim / Germany   fax:   (49) 6136 9948-10
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/