QA cycle report for 2.7 M2 RC2

* QA cycle report for 2.7 M2 RC2
@ 2019-02-25  1:48 Jain, Sangeeta
  2019-02-25  1:59 ` Jain, Sangeeta
  0 siblings, 1 reply; 3+ messages in thread
From: Jain, Sangeeta @ 2019-02-25  1:48 UTC (permalink / raw)
  To: 'yocto@yoctoproject.org',
	Eggleton, Paul, 'richard.purdie@linuxfoundation.org',
	'Michael Halstead',
	Erway, Tracey M, sjolley.yp.pm
  Cc: OTC Embedded Malaysia, Greenberg, Suzy M

[-- Attachment #1: Type: text/plain, Size: 2177 bytes --]

Hello All,

This is the full report for 2.7 M2 RC2:

======= Summary ========

All planned tests were executed.

Total Test Executed - 3624

Passed Test - 3607

Failed Test - 9

There were zero high milestone defect.  Team had found 2 new defects in Toaster[1] and BSP[2].

3 existing issues were observed in this release.

For ptest, there is a drop in percentage of pass rate for 3 modules: nettle, perl and python3. Bugs are reported for Nettle [3] and Perl [4]. For python3, no bug is filed, since there is a decrease in percentage but no failures as compared to previous results.

======= QA-Hints========

  1.  No high milestone defect.
  2.  CROPS manual test cases (total no 6) is replaced by one consolidated auto test case in this test cycle.

======= Bugs ========

New Bugs

[1] Bug 13191 - [2.7 M2 RC1] Systemtap doesn't work on beaglebone

https://bugzilla.yoctoproject.org/show_bug.cgi?id=13191

[2] Bug 13178 - [2.7_m2_rc1][compliance test][LSB Test] "Failed to load module Core_test.pm, samba_test.pm", LSB Test has failed"

https://bugzilla.yoctoproject.org/show_bug.cgi?id=13178

ptest Bugs:

[3] Bug 13193 - [2.7 M2 RC2] nettle ptest failure

https://bugzilla.yoctoproject.org/show_bug.cgi?id=13193

[4] Bug 13194<https://bugzilla.yoctoproject.org/show_bug.cgi?id=12991> - [2.7 M2 RC2] perl ptest failure

https://bugzilla.yoctoproject.org/show_bug.cgi?id=13194

Previous Bugs observed in this release:

[5] Bug 13153 - [2.7 M2 RC1] Systemtap doesn't work on beaglebone

https://bugzilla.yoctoproject.org/show_bug.cgi?id=13153

[6] Bug 12991<https://bugzilla.yoctoproject.org/show_bug.cgi?id=12991> - [Bug] [2.6 M4 RC1][Build-Appliance] Bitbake build-appliance-image getting failed during building image due to webkitgtk package.

https://bugzilla.yoctoproject.org/show_bug.cgi?id=12991

[7] Bug 12499<https://bugzilla.yoctoproject.org/show_bug.cgi?id=12991> - [Bug] [2.5 M1 RC3] qemuarm: failed to shutdown.

https://bugzilla.yoctoproject.org/show_bug.cgi?id=12499

Thanks & Regards,
Sangeeta Jain

[-- Attachment #2: Type: text/html, Size: 12490 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread