[PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Christophe JAILLET]

The clsk are prepared, enabled, then disabled. So if an error occurs after
the disable step, they are still prepared.

Add an error handling path to unprepare the clks in such a case, as already
done in the .remove function.

Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/i2c/busses/i2c-mt65xx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index bdecb78bfc26..8e6985354fd5 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1420,17 +1420,22 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Request I2C IRQ %d fail\n", irq);
-		return ret;
+		goto err_bulk_unprepare;
 	}
 
 	i2c_set_adapdata(&i2c->adap, i2c);
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret)
-		return ret;
+		goto err_bulk_unprepare;
 
 	platform_set_drvdata(pdev, i2c);
 
 	return 0;
+
+err_bulk_unprepare:
+	clk_bulk_unprepare(I2C_MT65XX_CLK_MAX, i2c->clocks);
+
+	return ret;
 }
 
 static int mtk_i2c_remove(struct platform_device *pdev)
-- 
2.34.1

[PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Christophe JAILLET]

The clsk are prepared, enabled, then disabled. So if an error occurs after
the disable step, they are still prepared.

Add an error handling path to unprepare the clks in such a case, as already
done in the .remove function.

Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/i2c/busses/i2c-mt65xx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index bdecb78bfc26..8e6985354fd5 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1420,17 +1420,22 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Request I2C IRQ %d fail\n", irq);
-		return ret;
+		goto err_bulk_unprepare;
 	}
 
 	i2c_set_adapdata(&i2c->adap, i2c);
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret)
-		return ret;
+		goto err_bulk_unprepare;
 
 	platform_set_drvdata(pdev, i2c);
 
 	return 0;
+
+err_bulk_unprepare:
+	clk_bulk_unprepare(I2C_MT65XX_CLK_MAX, i2c->clocks);
+
+	return ret;
 }
 
 static int mtk_i2c_remove(struct platform_device *pdev)
-- 
2.34.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Christophe JAILLET]

The clsk are prepared, enabled, then disabled. So if an error occurs after
the disable step, they are still prepared.

Add an error handling path to unprepare the clks in such a case, as already
done in the .remove function.

Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/i2c/busses/i2c-mt65xx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index bdecb78bfc26..8e6985354fd5 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1420,17 +1420,22 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Request I2C IRQ %d fail\n", irq);
-		return ret;
+		goto err_bulk_unprepare;
 	}
 
 	i2c_set_adapdata(&i2c->adap, i2c);
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret)
-		return ret;
+		goto err_bulk_unprepare;
 
 	platform_set_drvdata(pdev, i2c);
 
 	return 0;
+
+err_bulk_unprepare:
+	clk_bulk_unprepare(I2C_MT65XX_CLK_MAX, i2c->clocks);
+
+	return ret;
 }
 
 static int mtk_i2c_remove(struct platform_device *pdev)
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[AngeloGioacchino Del Regno]

Il 22/05/22 14:22, Christophe JAILLET ha scritto:
> The clsk are prepared, enabled, then disabled. So if an error occurs after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Thanks!

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[AngeloGioacchino Del Regno]

Il 22/05/22 14:22, Christophe JAILLET ha scritto:
> The clsk are prepared, enabled, then disabled. So if an error occurs after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Thanks!

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[AngeloGioacchino Del Regno]

Il 22/05/22 14:22, Christophe JAILLET ha scritto:
> The clsk are prepared, enabled, then disabled. So if an error occurs after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Thanks!

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Qii Wang]

On Sun, 2022-05-22 at 14:22 +0200, Christophe JAILLET wrote:
> The clsk are prepared, enabled, then disabled. So if an error occurs
> after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as
> already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid
> circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Reviewed-by: Qii Wang <qii.wang@mediatek.com>

> ---
>  drivers/i2c/busses/i2c-mt65xx.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Qii Wang]

On Sun, 2022-05-22 at 14:22 +0200, Christophe JAILLET wrote:
> The clsk are prepared, enabled, then disabled. So if an error occurs
> after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as
> already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid
> circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Reviewed-by: Qii Wang <qii.wang@mediatek.com>

> ---
>  drivers/i2c/busses/i2c-mt65xx.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Qii Wang]

On Sun, 2022-05-22 at 14:22 +0200, Christophe JAILLET wrote:
> The clsk are prepared, enabled, then disabled. So if an error occurs
> after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as
> already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid
> circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Reviewed-by: Qii Wang <qii.wang@mediatek.com>

> ---
>  drivers/i2c/busses/i2c-mt65xx.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 511 bytes --]

On Sun, May 22, 2022 at 02:22:07PM +0200, Christophe JAILLET wrote:
> The clsk are prepared, enabled, then disabled. So if an error occurs after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Applied to for-current, thanks!


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 511 bytes --]

On Sun, May 22, 2022 at 02:22:07PM +0200, Christophe JAILLET wrote:
> The clsk are prepared, enabled, then disabled. So if an error occurs after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Applied to for-current, thanks!


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 511 bytes --]

On Sun, May 22, 2022 at 02:22:07PM +0200, Christophe JAILLET wrote:
> The clsk are prepared, enabled, then disabled. So if an error occurs after
> the disable step, they are still prepared.
> 
> Add an error handling path to unprepare the clks in such a case, as already
> done in the .remove function.
> 
> Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Applied to for-current, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]