* Major feature changes for the next release - merging very soon @ 2011-01-25 13:57 Richard Purdie 2011-01-25 14:19 ` Koen Kooi 2011-01-25 18:34 ` Koen Kooi 0 siblings, 2 replies; 11+ messages in thread From: Richard Purdie @ 2011-01-25 13:57 UTC (permalink / raw) To: poky; +Cc: yocto As has been mentioned in other emails we're working on some major enhancements for the next release. Several components of these are now ready for merging to the master branch. These include: * Rework of the compiler bootstrap process If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or any of the gcc components you'll have run into issues with the compiler bootstrap process overwriting files. This also causes problems for sstate as it doesn't get on well with two sstate archives providing the same file. The changes we have queued split the intermediate components into a separate sysroot so no files are overwritten and the whole process is less fragile and more robust. Each gcc-cross step (initial, intermediate and final) also stage binaries in separate locations. * Changes to sysroot structure We now support creating a sysroot per machine target rather than the original multimachine approach we have used. This means packages with an "all" architecture can be safely installed into the sysroot and used correctly fixing bugs in that area and it also allows machines like emenlow which have separate graphics components to build and work correctly yet be able to share builds with other machines like atom-pc. If you change machine and the machine you change to shares a core architecture with a previous build, the components from that previous build will be used to construct a new sysroot using the sstate prebuilt packages. The branch I'm planning to merge very soon with these features is: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap There are also some changes in there to fix pseudo issues people have been seeing and there are some fetcher changes in there moving us towards more reliability in the fetcher. Due to the nature of the changes, people are going to have to wipe tmpdir and rebuild after these changes and anyone trying to use an existing build will see an error message. We try hard to avoid requiring this but this is a side effect of making significant structural improvements like the above. Just to be 100% safe I changed the sstate version number too, invalidating previous sstate packages due to the structure changes. Since this is a new development there may be a few bumps as we merge things, I think these developments are exciting and fix long standing problems so please bare with us as we work though any issues! Cheers, Richard ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Major feature changes for the next release - merging very soon 2011-01-25 13:57 Major feature changes for the next release - merging very soon Richard Purdie @ 2011-01-25 14:19 ` Koen Kooi 2011-01-25 18:34 ` Koen Kooi 1 sibling, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 14:19 UTC (permalink / raw) To: Richard Purdie; +Cc: yocto, poky Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: > As has been mentioned in other emails we're working on some major > enhancements for the next release. Several components of these are now > ready for merging to the master branch. These include: > > * Rework of the compiler bootstrap process > > If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or > any of the gcc components you'll have run into issues with the compiler > bootstrap process overwriting files. This also causes problems for > sstate as it doesn't get on well with two sstate archives providing the > same file. > > The changes we have queued split the intermediate components into a > separate sysroot so no files are overwritten and the whole process is > less fragile and more robust. Each gcc-cross step (initial, intermediate > and final) also stage binaries in separate locations. > > * Changes to sysroot structure > > We now support creating a sysroot per machine target rather than the > original multimachine approach we have used. This means packages with an > "all" architecture can be safely installed into the sysroot and used > correctly fixing bugs in that area and it also allows machines like > emenlow which have separate graphics components to build and work > correctly yet be able to share builds with other machines like atom-pc. > > If you change machine and the machine you change to shares a core > architecture with a previous build, the components from that previous > build will be used to construct a new sysroot using the sstate prebuilt > packages. > > The branch I'm planning to merge very soon with these features is: > > http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap My build of console-image for angstrom using that branch is not at: NOTE: package gcc-cross-4.5-r31.2+svnr168622: task do_package: Succeeded So far, so good :) regards, Koen ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Major feature changes for the next release - merging very soon @ 2011-01-25 14:19 ` Koen Kooi 0 siblings, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 14:19 UTC (permalink / raw) To: Richard Purdie; +Cc: yocto, poky Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: > As has been mentioned in other emails we're working on some major > enhancements for the next release. Several components of these are now > ready for merging to the master branch. These include: > > * Rework of the compiler bootstrap process > > If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or > any of the gcc components you'll have run into issues with the compiler > bootstrap process overwriting files. This also causes problems for > sstate as it doesn't get on well with two sstate archives providing the > same file. > > The changes we have queued split the intermediate components into a > separate sysroot so no files are overwritten and the whole process is > less fragile and more robust. Each gcc-cross step (initial, intermediate > and final) also stage binaries in separate locations. > > * Changes to sysroot structure > > We now support creating a sysroot per machine target rather than the > original multimachine approach we have used. This means packages with an > "all" architecture can be safely installed into the sysroot and used > correctly fixing bugs in that area and it also allows machines like > emenlow which have separate graphics components to build and work > correctly yet be able to share builds with other machines like atom-pc. > > If you change machine and the machine you change to shares a core > architecture with a previous build, the components from that previous > build will be used to construct a new sysroot using the sstate prebuilt > packages. > > The branch I'm planning to merge very soon with these features is: > > http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap My build of console-image for angstrom using that branch is not at: NOTE: package gcc-cross-4.5-r31.2+svnr168622: task do_package: Succeeded So far, so good :) regards, Koen ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Major feature changes for the next release - merging very soon 2011-01-25 13:57 Major feature changes for the next release - merging very soon Richard Purdie @ 2011-01-25 18:34 ` Koen Kooi 2011-01-25 18:34 ` Koen Kooi 1 sibling, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 18:34 UTC (permalink / raw) To: Richard Purdie; +Cc: yocto, poky Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: > As has been mentioned in other emails we're working on some major > enhancements for the next release. Several components of these are now > ready for merging to the master branch. These include: > > * Rework of the compiler bootstrap process > > If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or > any of the gcc components you'll have run into issues with the compiler > bootstrap process overwriting files. This also causes problems for > sstate as it doesn't get on well with two sstate archives providing the > same file. > > The changes we have queued split the intermediate components into a > separate sysroot so no files are overwritten and the whole process is > less fragile and more robust. Each gcc-cross step (initial, intermediate > and final) also stage binaries in separate locations. > > * Changes to sysroot structure > > We now support creating a sysroot per machine target rather than the > original multimachine approach we have used. This means packages with an > "all" architecture can be safely installed into the sysroot and used > correctly fixing bugs in that area and it also allows machines like > emenlow which have separate graphics components to build and work > correctly yet be able to share builds with other machines like atom-pc. > > If you change machine and the machine you change to shares a core > architecture with a previous build, the components from that previous > build will be used to construct a new sysroot using the sstate prebuilt > packages. > > The branch I'm planning to merge very soon with these features is: > > http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap For a single machine: NOTE: package console-image-1.0-r0: task do_rm_work_all: Succeeded Now building it incrementally for a different machine ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Major feature changes for the next release - merging very soon @ 2011-01-25 18:34 ` Koen Kooi 0 siblings, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 18:34 UTC (permalink / raw) To: Richard Purdie; +Cc: yocto, poky Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: > As has been mentioned in other emails we're working on some major > enhancements for the next release. Several components of these are now > ready for merging to the master branch. These include: > > * Rework of the compiler bootstrap process > > If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or > any of the gcc components you'll have run into issues with the compiler > bootstrap process overwriting files. This also causes problems for > sstate as it doesn't get on well with two sstate archives providing the > same file. > > The changes we have queued split the intermediate components into a > separate sysroot so no files are overwritten and the whole process is > less fragile and more robust. Each gcc-cross step (initial, intermediate > and final) also stage binaries in separate locations. > > * Changes to sysroot structure > > We now support creating a sysroot per machine target rather than the > original multimachine approach we have used. This means packages with an > "all" architecture can be safely installed into the sysroot and used > correctly fixing bugs in that area and it also allows machines like > emenlow which have separate graphics components to build and work > correctly yet be able to share builds with other machines like atom-pc. > > If you change machine and the machine you change to shares a core > architecture with a previous build, the components from that previous > build will be used to construct a new sysroot using the sstate prebuilt > packages. > > The branch I'm planning to merge very soon with these features is: > > http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap For a single machine: NOTE: package console-image-1.0-r0: task do_rm_work_all: Succeeded Now building it incrementally for a different machine ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Major feature changes for the next release - merging very soon 2011-01-25 18:34 ` Koen Kooi @ 2011-01-25 19:18 ` Koen Kooi -1 siblings, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 19:18 UTC (permalink / raw) To: poky; +Cc: yocto Op 25 jan 2011, om 19:34 heeft Koen Kooi het volgende geschreven: > > Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: > >> As has been mentioned in other emails we're working on some major >> enhancements for the next release. Several components of these are now >> ready for merging to the master branch. These include: >> >> * Rework of the compiler bootstrap process >> >> If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or >> any of the gcc components you'll have run into issues with the compiler >> bootstrap process overwriting files. This also causes problems for >> sstate as it doesn't get on well with two sstate archives providing the >> same file. >> >> The changes we have queued split the intermediate components into a >> separate sysroot so no files are overwritten and the whole process is >> less fragile and more robust. Each gcc-cross step (initial, intermediate >> and final) also stage binaries in separate locations. >> >> * Changes to sysroot structure >> >> We now support creating a sysroot per machine target rather than the >> original multimachine approach we have used. This means packages with an >> "all" architecture can be safely installed into the sysroot and used >> correctly fixing bugs in that area and it also allows machines like >> emenlow which have separate graphics components to build and work >> correctly yet be able to share builds with other machines like atom-pc. >> >> If you change machine and the machine you change to shares a core >> architecture with a previous build, the components from that previous >> build will be used to construct a new sysroot using the sstate prebuilt >> packages. >> >> The branch I'm planning to merge very soon with these features is: >> >> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap > > For a single machine: > > NOTE: package console-image-1.0-r0: task do_rm_work_all: Succeeded > > > Now building it incrementally for a different machine Switchting from usrp-e1xx (armv7a) to beagleboard (also armv7a) and building console-image again: NOTE: package perl-5.12.2-r0: task do_package: Started ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 Log data follows: | cp: cannot stat `/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/image/*': No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2xs: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2ph: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/pod/*.pod: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/cacheout.pl: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/FileCache.pm: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/config.sh: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config.pm: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config_heavy.pl: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/perl.h: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/pp.h: No such file or directory | Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) | ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Major feature changes for the next release - merging very soon @ 2011-01-25 19:18 ` Koen Kooi 0 siblings, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 19:18 UTC (permalink / raw) To: poky; +Cc: yocto Op 25 jan 2011, om 19:34 heeft Koen Kooi het volgende geschreven: > > Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: > >> As has been mentioned in other emails we're working on some major >> enhancements for the next release. Several components of these are now >> ready for merging to the master branch. These include: >> >> * Rework of the compiler bootstrap process >> >> If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or >> any of the gcc components you'll have run into issues with the compiler >> bootstrap process overwriting files. This also causes problems for >> sstate as it doesn't get on well with two sstate archives providing the >> same file. >> >> The changes we have queued split the intermediate components into a >> separate sysroot so no files are overwritten and the whole process is >> less fragile and more robust. Each gcc-cross step (initial, intermediate >> and final) also stage binaries in separate locations. >> >> * Changes to sysroot structure >> >> We now support creating a sysroot per machine target rather than the >> original multimachine approach we have used. This means packages with an >> "all" architecture can be safely installed into the sysroot and used >> correctly fixing bugs in that area and it also allows machines like >> emenlow which have separate graphics components to build and work >> correctly yet be able to share builds with other machines like atom-pc. >> >> If you change machine and the machine you change to shares a core >> architecture with a previous build, the components from that previous >> build will be used to construct a new sysroot using the sstate prebuilt >> packages. >> >> The branch I'm planning to merge very soon with these features is: >> >> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap > > For a single machine: > > NOTE: package console-image-1.0-r0: task do_rm_work_all: Succeeded > > > Now building it incrementally for a different machine Switchting from usrp-e1xx (armv7a) to beagleboard (also armv7a) and building console-image again: NOTE: package perl-5.12.2-r0: task do_package: Started ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 Log data follows: | cp: cannot stat `/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/image/*': No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2xs: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2ph: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/pod/*.pod: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/cacheout.pl: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/FileCache.pm: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/config.sh: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config.pm: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config_heavy.pl: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/perl.h: No such file or directory | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/pp.h: No such file or directory | Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) | ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Major feature changes for the next release - merging very soon 2011-01-25 19:18 ` Koen Kooi @ 2011-01-25 19:41 ` Koen Kooi -1 siblings, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 19:41 UTC (permalink / raw) To: poky; +Cc: yocto Op 25 jan 2011, om 20:18 heeft Koen Kooi het volgende geschreven: > > Op 25 jan 2011, om 19:34 heeft Koen Kooi het volgende geschreven: > >> >> Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: >> >>> As has been mentioned in other emails we're working on some major >>> enhancements for the next release. Several components of these are now >>> ready for merging to the master branch. These include: >>> >>> * Rework of the compiler bootstrap process >>> >>> If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or >>> any of the gcc components you'll have run into issues with the compiler >>> bootstrap process overwriting files. This also causes problems for >>> sstate as it doesn't get on well with two sstate archives providing the >>> same file. >>> >>> The changes we have queued split the intermediate components into a >>> separate sysroot so no files are overwritten and the whole process is >>> less fragile and more robust. Each gcc-cross step (initial, intermediate >>> and final) also stage binaries in separate locations. >>> >>> * Changes to sysroot structure >>> >>> We now support creating a sysroot per machine target rather than the >>> original multimachine approach we have used. This means packages with an >>> "all" architecture can be safely installed into the sysroot and used >>> correctly fixing bugs in that area and it also allows machines like >>> emenlow which have separate graphics components to build and work >>> correctly yet be able to share builds with other machines like atom-pc. >>> >>> If you change machine and the machine you change to shares a core >>> architecture with a previous build, the components from that previous >>> build will be used to construct a new sysroot using the sstate prebuilt >>> packages. >>> >>> The branch I'm planning to merge very soon with these features is: >>> >>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap >> >> For a single machine: >> >> NOTE: package console-image-1.0-r0: task do_rm_work_all: Succeeded >> >> >> Now building it incrementally for a different machine > > Switchting from usrp-e1xx (armv7a) to beagleboard (also armv7a) and building console-image again: > > NOTE: package perl-5.12.2-r0: task do_package: Started > ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 > Log data follows: > | cp: cannot stat `/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/image/*': No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2xs: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2ph: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/pod/*.pod: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/cacheout.pl: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/FileCache.pm: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/config.sh: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config.pm: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config_heavy.pl: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/perl.h: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/pp.h: No such file or directory > | Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > | ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) And another one: NOTE: package pango-1.28.3-r1.0: task do_package: Started ERROR: Error executing a python function in /OE/tentacle/sources/layers/meta-openembedded/recipes-graphics/pango/pango_1.28.3.bb: OSError: [Errno 2] No such file or directory: '/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/package/usr/lib/pango/1.6.0/modules' ERROR: The stack trace of python calls that resulted in this exception/failure was: ERROR: File "populate_packages", line 203, in <module> ERROR: ERROR: File "populate_packages", line 7, in populate_packages ERROR: ERROR: File "package.bbclass", line 16, in do_split_packages ERROR: ERROR: The code that was being executed was: ERROR: 0199: bb.data.setVar('pkg_prerm_%s' % pkg, prerm, d) ERROR: 0200: ERROR: 0201: ERROR: 0202: ERROR: *** 0203:populate_packages(d) ERROR: 0204: ERROR: (file: 'populate_packages', lineno: 203, function: <module>) ERROR: 0003: prologue = bb.data.getVar("postinst_prologue", d, 1) ERROR: 0004: ERROR: 0005: modules_root = bb.data.expand('/usr/lib/pango/1.6.0/modules', d) ERROR: 0006: ERROR: *** 0007: do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + 'pango-querymodules > /etc/pango/pango.modules') ERROR: 0008: import glob, stat, errno, re ERROR: 0009: ERROR: 0010: workdir = bb.data.getVar('WORKDIR', d, True) ERROR: 0011: outdir = bb.data.getVar('DEPLOY_DIR', d, True) ERROR: (file: 'populate_packages', lineno: 7, function: populate_packages) ERROR: Function 'populate_packages' failed ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/temp/log.do_package.27054 It looks like do_install needs to get rerun on those recipes. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Major feature changes for the next release - merging very soon @ 2011-01-25 19:41 ` Koen Kooi 0 siblings, 0 replies; 11+ messages in thread From: Koen Kooi @ 2011-01-25 19:41 UTC (permalink / raw) To: poky; +Cc: yocto Op 25 jan 2011, om 20:18 heeft Koen Kooi het volgende geschreven: > > Op 25 jan 2011, om 19:34 heeft Koen Kooi het volgende geschreven: > >> >> Op 25 jan 2011, om 14:57 heeft Richard Purdie het volgende geschreven: >> >>> As has been mentioned in other emails we're working on some major >>> enhancements for the next release. Several components of these are now >>> ready for merging to the master branch. These include: >>> >>> * Rework of the compiler bootstrap process >>> >>> If you've ever tried to run "bitbake eglibc -c clean;bitbake eglibc" or >>> any of the gcc components you'll have run into issues with the compiler >>> bootstrap process overwriting files. This also causes problems for >>> sstate as it doesn't get on well with two sstate archives providing the >>> same file. >>> >>> The changes we have queued split the intermediate components into a >>> separate sysroot so no files are overwritten and the whole process is >>> less fragile and more robust. Each gcc-cross step (initial, intermediate >>> and final) also stage binaries in separate locations. >>> >>> * Changes to sysroot structure >>> >>> We now support creating a sysroot per machine target rather than the >>> original multimachine approach we have used. This means packages with an >>> "all" architecture can be safely installed into the sysroot and used >>> correctly fixing bugs in that area and it also allows machines like >>> emenlow which have separate graphics components to build and work >>> correctly yet be able to share builds with other machines like atom-pc. >>> >>> If you change machine and the machine you change to shares a core >>> architecture with a previous build, the components from that previous >>> build will be used to construct a new sysroot using the sstate prebuilt >>> packages. >>> >>> The branch I'm planning to merge very soon with these features is: >>> >>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=rpurdie/tt-bootstrap >> >> For a single machine: >> >> NOTE: package console-image-1.0-r0: task do_rm_work_all: Succeeded >> >> >> Now building it incrementally for a different machine > > Switchting from usrp-e1xx (armv7a) to beagleboard (also armv7a) and building console-image again: > > NOTE: package perl-5.12.2-r0: task do_package: Started > ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 > Log data follows: > | cp: cannot stat `/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/image/*': No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2xs: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2ph: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/pod/*.pod: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/cacheout.pl: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/FileCache.pm: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/config.sh: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config.pm: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config_heavy.pl: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/perl.h: No such file or directory > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/pp.h: No such file or directory > | Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > | ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) And another one: NOTE: package pango-1.28.3-r1.0: task do_package: Started ERROR: Error executing a python function in /OE/tentacle/sources/layers/meta-openembedded/recipes-graphics/pango/pango_1.28.3.bb: OSError: [Errno 2] No such file or directory: '/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/package/usr/lib/pango/1.6.0/modules' ERROR: The stack trace of python calls that resulted in this exception/failure was: ERROR: File "populate_packages", line 203, in <module> ERROR: ERROR: File "populate_packages", line 7, in populate_packages ERROR: ERROR: File "package.bbclass", line 16, in do_split_packages ERROR: ERROR: The code that was being executed was: ERROR: 0199: bb.data.setVar('pkg_prerm_%s' % pkg, prerm, d) ERROR: 0200: ERROR: 0201: ERROR: 0202: ERROR: *** 0203:populate_packages(d) ERROR: 0204: ERROR: (file: 'populate_packages', lineno: 203, function: <module>) ERROR: 0003: prologue = bb.data.getVar("postinst_prologue", d, 1) ERROR: 0004: ERROR: 0005: modules_root = bb.data.expand('/usr/lib/pango/1.6.0/modules', d) ERROR: 0006: ERROR: *** 0007: do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + 'pango-querymodules > /etc/pango/pango.modules') ERROR: 0008: import glob, stat, errno, re ERROR: 0009: ERROR: 0010: workdir = bb.data.getVar('WORKDIR', d, True) ERROR: 0011: outdir = bb.data.getVar('DEPLOY_DIR', d, True) ERROR: (file: 'populate_packages', lineno: 7, function: populate_packages) ERROR: Function 'populate_packages' failed ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/temp/log.do_package.27054 It looks like do_install needs to get rerun on those recipes. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [poky] Major feature changes for the next release - merging very soon 2011-01-25 19:41 ` Koen Kooi @ 2011-01-25 21:35 ` Richard Purdie -1 siblings, 0 replies; 11+ messages in thread From: Richard Purdie @ 2011-01-25 21:35 UTC (permalink / raw) To: Koen Kooi; +Cc: yocto, poky On Tue, 2011-01-25 at 20:41 +0100, Koen Kooi wrote: > Op 25 jan 2011, om 20:18 heeft Koen Kooi het volgende geschreven: > > Switchting from usrp-e1xx (armv7a) to beagleboard (also armv7a) and building console-image again: > > > > NOTE: package perl-5.12.2-r0: task do_package: Started > > ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > > ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 > > Log data follows: > > | cp: cannot stat `/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/image/*': No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2xs: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2ph: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/pod/*.pod: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/cacheout.pl: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/FileCache.pm: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/config.sh: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config.pm: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config_heavy.pl: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/perl.h: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/pp.h: No such file or directory > > | Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > > | ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > > And another one: > > NOTE: package pango-1.28.3-r1.0: task do_package: Started > ERROR: Error executing a python function in /OE/tentacle/sources/layers/meta-openembedded/recipes-graphics/pango/pango_1.28.3.bb: > OSError: [Errno 2] No such file or directory: '/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/package/usr/lib/pango/1.6.0/modules' > > ERROR: The stack trace of python calls that resulted in this exception/failure was: > ERROR: File "populate_packages", line 203, in <module> > ERROR: > ERROR: File "populate_packages", line 7, in populate_packages > ERROR: > ERROR: File "package.bbclass", line 16, in do_split_packages > ERROR: > ERROR: The code that was being executed was: > ERROR: 0199: bb.data.setVar('pkg_prerm_%s' % pkg, prerm, d) > ERROR: 0200: > ERROR: 0201: > ERROR: 0202: > ERROR: *** 0203:populate_packages(d) > ERROR: 0204: > ERROR: (file: 'populate_packages', lineno: 203, function: <module>) > ERROR: 0003: prologue = bb.data.getVar("postinst_prologue", d, 1) > ERROR: 0004: > ERROR: 0005: modules_root = bb.data.expand('/usr/lib/pango/1.6.0/modules', d) > ERROR: 0006: > ERROR: *** 0007: do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + 'pango-querymodules > /etc/pango/pango.modules') > ERROR: 0008: import glob, stat, errno, re > ERROR: 0009: > ERROR: 0010: workdir = bb.data.getVar('WORKDIR', d, True) > ERROR: 0011: outdir = bb.data.getVar('DEPLOY_DIR', d, True) > ERROR: (file: 'populate_packages', lineno: 7, function: populate_packages) > ERROR: Function 'populate_packages' failed > ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/temp/log.do_package.27054 > > It looks like do_install needs to get rerun on those recipes. I think these are due to the fact Koen is using rm_work (confirmed by Koen over irc). I agree we need to work out a way to handle this, it should help anyone trying to find a fix though. It should be easy to reproduce on Poky master switching between emenlow and atom-pc. Cheers, Richard ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Major feature changes for the next release - merging very soon @ 2011-01-25 21:35 ` Richard Purdie 0 siblings, 0 replies; 11+ messages in thread From: Richard Purdie @ 2011-01-25 21:35 UTC (permalink / raw) To: Koen Kooi; +Cc: yocto, poky On Tue, 2011-01-25 at 20:41 +0100, Koen Kooi wrote: > Op 25 jan 2011, om 20:18 heeft Koen Kooi het volgende geschreven: > > Switchting from usrp-e1xx (armv7a) to beagleboard (also armv7a) and building console-image again: > > > > NOTE: package perl-5.12.2-r0: task do_package: Started > > ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > > ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 > > Log data follows: > > | cp: cannot stat `/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/image/*': No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2xs: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/bin/h2ph: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/pod/*.pod: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/cacheout.pl: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/FileCache.pm: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/config.sh: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config.pm: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/Config_heavy.pl: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/perl.h: No such file or directory > > | sed: can't read /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/package/usr/lib/perl/5.12.2/CORE/pp.h: No such file or directory > > | Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > > | ERROR: Function 'perl_package_preprocess' failed (see /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/perl-5.12.2-r0/temp/log.do_package.28537 for further information) > > And another one: > > NOTE: package pango-1.28.3-r1.0: task do_package: Started > ERROR: Error executing a python function in /OE/tentacle/sources/layers/meta-openembedded/recipes-graphics/pango/pango_1.28.3.bb: > OSError: [Errno 2] No such file or directory: '/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/package/usr/lib/pango/1.6.0/modules' > > ERROR: The stack trace of python calls that resulted in this exception/failure was: > ERROR: File "populate_packages", line 203, in <module> > ERROR: > ERROR: File "populate_packages", line 7, in populate_packages > ERROR: > ERROR: File "package.bbclass", line 16, in do_split_packages > ERROR: > ERROR: The code that was being executed was: > ERROR: 0199: bb.data.setVar('pkg_prerm_%s' % pkg, prerm, d) > ERROR: 0200: > ERROR: 0201: > ERROR: 0202: > ERROR: *** 0203:populate_packages(d) > ERROR: 0204: > ERROR: (file: 'populate_packages', lineno: 203, function: <module>) > ERROR: 0003: prologue = bb.data.getVar("postinst_prologue", d, 1) > ERROR: 0004: > ERROR: 0005: modules_root = bb.data.expand('/usr/lib/pango/1.6.0/modules', d) > ERROR: 0006: > ERROR: *** 0007: do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + 'pango-querymodules > /etc/pango/pango.modules') > ERROR: 0008: import glob, stat, errno, re > ERROR: 0009: > ERROR: 0010: workdir = bb.data.getVar('WORKDIR', d, True) > ERROR: 0011: outdir = bb.data.getVar('DEPLOY_DIR', d, True) > ERROR: (file: 'populate_packages', lineno: 7, function: populate_packages) > ERROR: Function 'populate_packages' failed > ERROR: Logfile of failure stored in: /OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/pango-1.28.3-r1.0/temp/log.do_package.27054 > > It looks like do_install needs to get rerun on those recipes. I think these are due to the fact Koen is using rm_work (confirmed by Koen over irc). I agree we need to work out a way to handle this, it should help anyone trying to find a fix though. It should be easy to reproduce on Poky master switching between emenlow and atom-pc. Cheers, Richard ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2011-01-25 21:35 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-01-25 13:57 Major feature changes for the next release - merging very soon Richard Purdie 2011-01-25 14:19 ` [poky] " Koen Kooi 2011-01-25 14:19 ` Koen Kooi 2011-01-25 18:34 ` [poky] " Koen Kooi 2011-01-25 18:34 ` Koen Kooi 2011-01-25 19:18 ` [poky] " Koen Kooi 2011-01-25 19:18 ` Koen Kooi 2011-01-25 19:41 ` [poky] " Koen Kooi 2011-01-25 19:41 ` Koen Kooi 2011-01-25 21:35 ` [poky] " Richard Purdie 2011-01-25 21:35 ` Richard Purdie
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.