* [PATCH] arm: dts: stm32mp15: alignment with v5.16
@ 2021-12-17 15:30 Patrick Delaunay
2021-12-20 8:50 ` Patrice CHOTARD
2022-01-24 12:15 ` Patrice CHOTARD
0 siblings, 2 replies; 3+ messages in thread
From: Patrick Delaunay @ 2021-12-17 15:30 UTC (permalink / raw)
To: u-boot; +Cc: Patrick Delaunay, Patrice Chotard, Tom Rini, uboot-stm32
Device tree alignment with Linux kernel v5.16-rc5
- ARM: dts: stm32: set otg-rev on stm32mp151
- ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
- ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
- ARM: dts: stm32: fix SAI sub nodes register range
- ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
arch/arm/dts/stm32mp15-pinctrl.dtsi | 8 ++++----
arch/arm/dts/stm32mp151.dtsi | 19 ++++++++++---------
arch/arm/dts/stm32mp15xx-dkx.dtsi | 2 +-
3 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index 5b60ecbd71..d3553e0f01 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1179,7 +1179,7 @@
};
};
- sai2a_pins_c: sai2a-4 {
+ sai2a_pins_c: sai2a-2 {
pins {
pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
<STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1190,7 +1190,7 @@
};
};
- sai2a_sleep_pins_c: sai2a-5 {
+ sai2a_sleep_pins_c: sai2a-sleep-2 {
pins {
pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
<STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1235,14 +1235,14 @@
};
};
- sai2b_pins_c: sai2a-4 {
+ sai2b_pins_c: sai2b-2 {
pins1 {
pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
bias-disable;
};
};
- sai2b_sleep_pins_c: sai2a-sleep-5 {
+ sai2b_sleep_pins_c: sai2b-sleep-2 {
pins {
pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
};
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 8e0a0bc1dd..5a2be00758 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -842,7 +842,7 @@
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x1c>;
+ reg = <0x4 0x20>;
clocks = <&rcc SAI1_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 87 0x400 0x01>;
@@ -852,7 +852,7 @@
sai1b: audio-controller@4400a024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI1_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 88 0x400 0x01>;
@@ -873,7 +873,7 @@
sai2a: audio-controller@4400b004 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x1c>;
+ reg = <0x4 0x20>;
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 89 0x400 0x01>;
@@ -883,7 +883,7 @@
sai2b: audio-controller@4400b024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 90 0x400 0x01>;
@@ -904,7 +904,7 @@
sai3a: audio-controller@4400c004 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x1c>;
+ reg = <0x04 0x20>;
clocks = <&rcc SAI3_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 113 0x400 0x01>;
@@ -914,7 +914,7 @@
sai3b: audio-controller@4400c024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI3_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 114 0x400 0x01>;
@@ -1103,6 +1103,7 @@
g-np-tx-fifo-size = <32>;
g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
dr_mode = "otg";
+ otg-rev = <0x200>;
usb33d-supply = <&usb33>;
status = "disabled";
};
@@ -1301,7 +1302,7 @@
sai4a: audio-controller@50027004 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x1c>;
+ reg = <0x04 0x20>;
clocks = <&rcc SAI4_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 99 0x400 0x01>;
@@ -1311,7 +1312,7 @@
sai4b: audio-controller@50027024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI4_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 100 0x400 0x01>;
@@ -1482,7 +1483,7 @@
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
- clocks = <&rcc USBH>;
+ clocks = <&rcc USBH>, <&usbphyc>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 8fc93b0f94..5502eec94b 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -257,7 +257,7 @@
stusb1600@28 {
compatible = "st,stusb1600";
reg = <0x28>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpioi>;
pinctrl-names = "default";
pinctrl-0 = <&stusb1600_pins_a>;
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm: dts: stm32mp15: alignment with v5.16
2021-12-17 15:30 [PATCH] arm: dts: stm32mp15: alignment with v5.16 Patrick Delaunay
@ 2021-12-20 8:50 ` Patrice CHOTARD
2022-01-24 12:15 ` Patrice CHOTARD
1 sibling, 0 replies; 3+ messages in thread
From: Patrice CHOTARD @ 2021-12-20 8:50 UTC (permalink / raw)
To: Patrick Delaunay, u-boot; +Cc: Tom Rini, uboot-stm32
Hi Patrick
On 12/17/21 4:30 PM, Patrick Delaunay wrote:
> Device tree alignment with Linux kernel v5.16-rc5
> - ARM: dts: stm32: set otg-rev on stm32mp151
> - ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
> - ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
> - ARM: dts: stm32: fix SAI sub nodes register range
> - ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
>
> arch/arm/dts/stm32mp15-pinctrl.dtsi | 8 ++++----
> arch/arm/dts/stm32mp151.dtsi | 19 ++++++++++---------
> arch/arm/dts/stm32mp15xx-dkx.dtsi | 2 +-
> 3 files changed, 15 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> index 5b60ecbd71..d3553e0f01 100644
> --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> @@ -1179,7 +1179,7 @@
> };
> };
>
> - sai2a_pins_c: sai2a-4 {
> + sai2a_pins_c: sai2a-2 {
> pins {
> pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
> <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
> @@ -1190,7 +1190,7 @@
> };
> };
>
> - sai2a_sleep_pins_c: sai2a-5 {
> + sai2a_sleep_pins_c: sai2a-sleep-2 {
> pins {
> pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
> <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
> @@ -1235,14 +1235,14 @@
> };
> };
>
> - sai2b_pins_c: sai2a-4 {
> + sai2b_pins_c: sai2b-2 {
> pins1 {
> pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
> bias-disable;
> };
> };
>
> - sai2b_sleep_pins_c: sai2a-sleep-5 {
> + sai2b_sleep_pins_c: sai2b-sleep-2 {
> pins {
> pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
> };
> diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
> index 8e0a0bc1dd..5a2be00758 100644
> --- a/arch/arm/dts/stm32mp151.dtsi
> +++ b/arch/arm/dts/stm32mp151.dtsi
> @@ -842,7 +842,7 @@
> #sound-dai-cells = <0>;
>
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x4 0x1c>;
> + reg = <0x4 0x20>;
> clocks = <&rcc SAI1_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 87 0x400 0x01>;
> @@ -852,7 +852,7 @@
> sai1b: audio-controller@4400a024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI1_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 88 0x400 0x01>;
> @@ -873,7 +873,7 @@
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x4 0x1c>;
> + reg = <0x4 0x20>;
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 89 0x400 0x01>;
> @@ -883,7 +883,7 @@
> sai2b: audio-controller@4400b024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 90 0x400 0x01>;
> @@ -904,7 +904,7 @@
> sai3a: audio-controller@4400c004 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x04 0x1c>;
> + reg = <0x04 0x20>;
> clocks = <&rcc SAI3_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 113 0x400 0x01>;
> @@ -914,7 +914,7 @@
> sai3b: audio-controller@4400c024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI3_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 114 0x400 0x01>;
> @@ -1103,6 +1103,7 @@
> g-np-tx-fifo-size = <32>;
> g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
> dr_mode = "otg";
> + otg-rev = <0x200>;
> usb33d-supply = <&usb33>;
> status = "disabled";
> };
> @@ -1301,7 +1302,7 @@
> sai4a: audio-controller@50027004 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x04 0x1c>;
> + reg = <0x04 0x20>;
> clocks = <&rcc SAI4_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 99 0x400 0x01>;
> @@ -1311,7 +1312,7 @@
> sai4b: audio-controller@50027024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI4_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 100 0x400 0x01>;
> @@ -1482,7 +1483,7 @@
> usbh_ohci: usb@5800c000 {
> compatible = "generic-ohci";
> reg = <0x5800c000 0x1000>;
> - clocks = <&rcc USBH>;
> + clocks = <&rcc USBH>, <&usbphyc>;
> resets = <&rcc USBH_R>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> index 8fc93b0f94..5502eec94b 100644
> --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> @@ -257,7 +257,7 @@
> stusb1600@28 {
> compatible = "st,stusb1600";
> reg = <0x28>;
> - interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> interrupt-parent = <&gpioi>;
> pinctrl-names = "default";
> pinctrl-0 = <&stusb1600_pins_a>;
>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Thanks
Patrice
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm: dts: stm32mp15: alignment with v5.16
2021-12-17 15:30 [PATCH] arm: dts: stm32mp15: alignment with v5.16 Patrick Delaunay
2021-12-20 8:50 ` Patrice CHOTARD
@ 2022-01-24 12:15 ` Patrice CHOTARD
1 sibling, 0 replies; 3+ messages in thread
From: Patrice CHOTARD @ 2022-01-24 12:15 UTC (permalink / raw)
To: Patrick Delaunay, u-boot; +Cc: Tom Rini, uboot-stm32
Hi Patrick
On 12/17/21 16:30, Patrick Delaunay wrote:
> Device tree alignment with Linux kernel v5.16-rc5
> - ARM: dts: stm32: set otg-rev on stm32mp151
> - ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
> - ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
> - ARM: dts: stm32: fix SAI sub nodes register range
> - ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
>
> arch/arm/dts/stm32mp15-pinctrl.dtsi | 8 ++++----
> arch/arm/dts/stm32mp151.dtsi | 19 ++++++++++---------
> arch/arm/dts/stm32mp15xx-dkx.dtsi | 2 +-
> 3 files changed, 15 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> index 5b60ecbd71..d3553e0f01 100644
> --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> @@ -1179,7 +1179,7 @@
> };
> };
>
> - sai2a_pins_c: sai2a-4 {
> + sai2a_pins_c: sai2a-2 {
> pins {
> pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
> <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
> @@ -1190,7 +1190,7 @@
> };
> };
>
> - sai2a_sleep_pins_c: sai2a-5 {
> + sai2a_sleep_pins_c: sai2a-sleep-2 {
> pins {
> pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
> <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
> @@ -1235,14 +1235,14 @@
> };
> };
>
> - sai2b_pins_c: sai2a-4 {
> + sai2b_pins_c: sai2b-2 {
> pins1 {
> pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
> bias-disable;
> };
> };
>
> - sai2b_sleep_pins_c: sai2a-sleep-5 {
> + sai2b_sleep_pins_c: sai2b-sleep-2 {
> pins {
> pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
> };
> diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
> index 8e0a0bc1dd..5a2be00758 100644
> --- a/arch/arm/dts/stm32mp151.dtsi
> +++ b/arch/arm/dts/stm32mp151.dtsi
> @@ -842,7 +842,7 @@
> #sound-dai-cells = <0>;
>
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x4 0x1c>;
> + reg = <0x4 0x20>;
> clocks = <&rcc SAI1_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 87 0x400 0x01>;
> @@ -852,7 +852,7 @@
> sai1b: audio-controller@4400a024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI1_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 88 0x400 0x01>;
> @@ -873,7 +873,7 @@
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x4 0x1c>;
> + reg = <0x4 0x20>;
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 89 0x400 0x01>;
> @@ -883,7 +883,7 @@
> sai2b: audio-controller@4400b024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 90 0x400 0x01>;
> @@ -904,7 +904,7 @@
> sai3a: audio-controller@4400c004 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x04 0x1c>;
> + reg = <0x04 0x20>;
> clocks = <&rcc SAI3_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 113 0x400 0x01>;
> @@ -914,7 +914,7 @@
> sai3b: audio-controller@4400c024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI3_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 114 0x400 0x01>;
> @@ -1103,6 +1103,7 @@
> g-np-tx-fifo-size = <32>;
> g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
> dr_mode = "otg";
> + otg-rev = <0x200>;
> usb33d-supply = <&usb33>;
> status = "disabled";
> };
> @@ -1301,7 +1302,7 @@
> sai4a: audio-controller@50027004 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-a";
> - reg = <0x04 0x1c>;
> + reg = <0x04 0x20>;
> clocks = <&rcc SAI4_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 99 0x400 0x01>;
> @@ -1311,7 +1312,7 @@
> sai4b: audio-controller@50027024 {
> #sound-dai-cells = <0>;
> compatible = "st,stm32-sai-sub-b";
> - reg = <0x24 0x1c>;
> + reg = <0x24 0x20>;
> clocks = <&rcc SAI4_K>;
> clock-names = "sai_ck";
> dmas = <&dmamux1 100 0x400 0x01>;
> @@ -1482,7 +1483,7 @@
> usbh_ohci: usb@5800c000 {
> compatible = "generic-ohci";
> reg = <0x5800c000 0x1000>;
> - clocks = <&rcc USBH>;
> + clocks = <&rcc USBH>, <&usbphyc>;
> resets = <&rcc USBH_R>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> index 8fc93b0f94..5502eec94b 100644
> --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> @@ -257,7 +257,7 @@
> stusb1600@28 {
> compatible = "st,stusb1600";
> reg = <0x28>;
> - interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> interrupt-parent = <&gpioi>;
> pinctrl-names = "default";
> pinctrl-0 = <&stusb1600_pins_a>;
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-01-24 12:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-17 15:30 [PATCH] arm: dts: stm32mp15: alignment with v5.16 Patrick Delaunay
2021-12-20 8:50 ` Patrice CHOTARD
2022-01-24 12:15 ` Patrice CHOTARD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.